1.Material: 316 stainless steel wire 2.Weave Type:Plain weave,twill weave,plain dutch weave,twill dutch weave,three heddle weave,five heddle weave. 3.Wire diameter:0.015mm-1mm 4.Mesh counts:3-635 mesh 5.Roll width: 3 feet,4 feet,5 feet up to 10 feet 6.Roll length:50 feet,100 feet up to 500 feet 7.Features: (1) wear resistance, high strength, long service life (2) high air permeability, good drainability, easy cleanability (3) high temperature resistance,corros ion resistance 8.Application: (1)widely used in aerospace, petroleum, chemical industry (2)scientific research and transportation industries (3)electroplating industry for pickling mesh, printing mesh (4)battery industry and a variety of sophisticated filtration products 9.Packing: 316 Stainless Steel Wire Mesh use moisture-proof packing and anti-extrusion packing. 316 Stainless Steel Wire Mesh is wound around flat and dry mandrel, inside with moisture-proof paper or other packaging and outside with wooden cases or wooden pallets.
1.Material: SS 201,SS 202, SS 304,SS 304L, SS 316,SS 316L,SS 321 2.Weave Type:Plain weave 3.Wire Diameter:0.04mm-1mm 4.Mesh counts:3-300 mesh 5.Roll width: 3 feet,4 feet,5 feet up to 10 feet 6.Roll length:50 feet,100 feet up to 500 feet 7.Features: (1) Square hole,warp wire and weft wire are of equal size. (2) Accurate in mesh size,high flow rate. (3) High efficient screeing,good stability,high opening rate,Low pressure loss. (4) flat surface,wear-resistant,good air permeability,firm in structure,easy to clean. 8.Application: (1)widely used in aerospace, petroleum, chemical industry (2)scientific research and transportation industries (3)electroplating industry for pickling mesh, printing mesh (4)battery industry and a variety of sophisticated filtration products 9.Packing: Plain weave stainless steel wire mesh use moisture-proof packing and anti-extrusion packing.Plain weave stianless steel wire mesh is wound around flat and dry mandrel,inside with moisture-proof paper or other packaging and outside with wooden cases or wooden pallets
1.Material: SS 201,SS 202, SS 304,SS 304L, SS 316,SS 316L,SS 321 2.Weave Type:Plain weave,twill weave,plain dutch weave,twill dutch weave,three heddle weave,five heddle weave. 3.Wire Diamter:0.015mm-1mm 4.Mesh counts:3-635 mesh 5.Aperture size :0.025-1mm 6.Roll width: 3 feet,4 feet,5 feet up to 10 feet 7.Roll length:50 feet,100 feet up to 500 feet 8.Features: (1) wear resistance, high strength, long service life (2) high air permeability, good drainability, easy cleanability (3) high temperature resistance,corrosion resistance 9.Application: (1)widely used in aerospace, petroleum, chemical industry (2)scientific research and transportation industries (3)electroplating industry for pickling mesh, printing mesh (4)battery industry and a variety of sophisticated filtration products 10.Packing: Stainless Steel Wire Mesh use moisture-proof packing and anti-extrusion packing.Stainless Steel Wire Mesh is wound around flat and dry mandrel,inside with moisture-proof paper or other packaging and outside with wooden cases or wooden pallets
Material: stainless steel, galvanized, Wire dia: 0.5-10mm Aperture: 5mm-20mm -
Material: stainless steel, galvanized, Wire dia: 0.5-10mm Aperture: 5mm-20mm -
stainless steel wire
Stainless steel ball valve available in sizes from 1/4" to 4" with a stainless steel body and quarter turn on/off design. Stainless steel ball valve are an industrial grade solution to your valve needs. We are one of the exclusive manufacturers of valves. High performance, high durability and industrial strength. These valves are available in manual operation by default but are available to be actuated.
Quick Details Standard or Nonstandard: Standard Brand Name: JINKETONGLI Structure: Ball Pressure: Medium Pressure Power: Manual Material: Stainless Steel Temperature of Media: Medium Temperature Media: Water Port Size: 8"-56" Place of Origin: Hebei, China (Mainland) Certification: ISO 9001 Model Number: Ball Valve Application: General, W.O.G Product name: Handle Gear Welded Ball Valve Size: Custom Made Connection: Welded Working pressure: PN 1.6-4.0Mpa Make Way: Casting Seal Material: PTFE Surface: Powder Coating Packaging & Delivery Packaging Details: wooden box or according customer's requirement Delivery Detail: Shipped in 15 days after payment
Our main products include various high qualified casting. Such as stainless steel, carbon steel, alloy steel, Heat-resistant steel.(stainless valves, pipe fittings, Machinery Accessories, Hardware Accessories and etc.) Wide range of applications for airplane, shipping, Petrochemical, Medicine, food, gas, construction and etc. Our products enjoy great popularity in Japan, America, Germany and other European countries with best quality and outstanding service. We have advanced analysis equipments(Direct Reading Spectrometer) from Germany. We make chemical analysis every furnace liquid steel front and rear to ensure quality of the casting and requirements for customers.
High quality NATAI GB203 Wire Drawing Lubricant used in The Protection of CO2 Gas Welding Wire Drawing Product Name GB203 Wire Drawing Lubricant Color White Basic Composition Butter, fatty acids, calcium hydroxide, calcium stearate Water Content < 3% Property Calcium soap Medium fat content Pretreatment Mechanical rust removing Pickling and lime treatment Pickling and coating Instructions for use GB203 Wire Drawing Lubricant is suitable for the first drawing before the heat treatment. Packaging & Delivery Packaging Details: Woven bag(with waterproof film), 25kg/bag or as customer required Delivery Detail: Shipped in 30 days after payment
High quality NATAI GB203 Wire Drawing Lubricant used in The Protection of CO2 Gas Welding Wire Drawing Product Name GB203 Wire Drawing Lubricant Color White Basic Composition Butter, fatty acids, calcium hydroxide, calcium stearate Water Content < 3% Property Calcium soap Medium fat content Pretreatment Mechanical rust removing Pickling and lime treatment Pickling and coating Instructions for use GB203 Wire Drawing Lubricant is suitable for the first drawing before the heat treatment. Packaging & Delivery Packaging Details: Woven bag(with waterproof film), 25kg/bag or as customer required Delivery Detail: Shipped in 30 days after payment
Stainless steel mesh terp tubes 1. Terp tubes are made of food grade stainless steel, which is excellent for rosing your favorite herbal concentrate. 2. Terp tubes can be reused many times and won?t touch any toxins or off flavors. 3. Micron size: 20micron, 25micron, 50micron, other microns can be offered as required Length*diameter: 8.5*1, 9*1cm, 9*1, 9*1.15, 9*1.5, 9*2, 12*1, 12*2.Sizes can be customized 4. Material:stainless steel 304, 316, 316l 5. Inventory: 304 stainless steel 9*1 25 micron and 50 micron in stock. 6. Shape: opening ends, one sealed end, two sealed ends.
1.Inlet dia. 5.0mm Outlet dia. 2.0mm 2.Max. Steel wire drawing speed, 5m/s 3.Drum of drawing machine, A. Material, dia. 560mm, iron cast B. With water cooling function 4.Lubrication mode:drawing oil 5.Bearing: zwz brand, made of gcr15 steel. 6.Drive mode, deduction gear, boneng brand made in china 7.Motor, first draw, 11kw, others, 22 kw, jinsheng brand made in china 8.Inverter, invt brand 22kw made in china 9.Plc: mitsubishi brand 10.Sensor:lan bao brand made in china 11.Low-voltage apparatus: chint brand made in china 12. Operating equipment: A. Weinview /invt brand color touch screen B.The buttons including emg stop, ready, start, stop, speed up, deduction, fault and reset). The yield of wire can be displayed on the screen. 13.Protective cover:steel material, can watch the wire running state from the window 14.Power: rated motor 176kw, in reality 88kw/h, 130kw/t 15.Production capacity: 8.4t/24h 16.Machine volume:1.5m*1.54m*1.4m per set 17.Weight 800kg per set, total 6400kg
Material : Carbon steel/stainless steel Diameter : Customized Length : Customized Pipe thickness : 1-4mm
Ded at the option of the manufacturer. Main steel tube grade: a53-a, a53-b etc. Other grade can also be provided after consulting with acustomers. Permissible variations in weight and dimensions: Weight -- the weight of the pipe as calculated from the relevant equation in asme b36.10m shall not vary by more than 10%. Diameter -- for pipe nps 1 1/2(dn40) and under, the outside diameter at any point shall not vary more than 1/64 in.(0.4mm) from the standard specified. For pipe nps 2 (dn 50) and over, the outside diamter shall not vary more than 1% from the standard specified. Thickness -- the minimum wall thickness at any point shall not more than 12.5% under the nominal wall thickness specified. The minimum wall thickness on inspection shall comform to the requirement. - According to astm a700
Din 2605-1/2615-1/2616-1/2617, din 28011, En 10253-1 Mss - sp - 75 - Into plywood case
SEAMLESS CARBON STEEL / STAINLESS STEEL BUTT-WELDING PIPE FITTINGS Types: Elbow 45, Elbow 90, Elbow 180, Equal Tee, Reducing Tee, Concentric Reducer, Eccentric Reducer, Cap and etc. Spec. standards: ANSI B16.9, ANSI B16.28; JIS B2311; DIN 2605, 2615, 2616, 2617 Material standards: ASTM A 234 WPB, JIS G3452, DIN 1629, SS304, SS316 Nominal pipe size: 1/2INCH to 48INCH(DN15 to DN1200) Wall Thickness: SCH20, STD, SCH40, XS, SCH80, XXS, SCH160, SGP
Design and manufacture: ASME/ANSI B16.11, B 1.20.1, MSS SP-79, 83, and JIS B 2316 Types: union, 45 and 90 degree elbow, tee, cap, coupling, nipple, bushing, plug and half-thread short pipe Ends: socket weld and threaded NPT Nominal diameter: NPS 1/8 to 4 inches (DN6 to DN100) Working pressure: Threaded: 2,000, 3,000, and 6,000lbs Socket weld: 3,000, 6,000, and 9,000lbs Materials: ASTM A 105, ASTM A 182 F304, F304L, F316, and F316L
Stainless steel fittings Including elbow 90 / 45, street elbow, tee, reducing tee, cross, union, union m/f, hexagon nipple, reducing hexagon nipple, hexafon bushing, square plug, hexagon plug, cap, hexagon cap, socket banded, reducing socket banded, socket plain, socket o. D. Machined, barrel nipple, hose nipple Size: 1/8" - 4" Material: SS304 / SS316 Pressure: 150PSI Threaded: DIN 2999/ 259, BSPP, BSPT, NPT, NPS.
eamless / Welded Carbon Steel Pipe Fittings Types: 45 and 90 LR/SR elbows, 180 returns, straight, reducing tees, caps, concentric and eccentric reducers Specification standards: ANSI B16.9, ANSI B16.28, JIS B2311, DIN 2605, 2615, 2616, and 2617 Material standards: ASTM A 234 WPB, JIS G3452, and DIN 1629 Nominal pipe size: 1/2 to 48-inch (DN15 to DN1200) Wall thickness: SCH20, STD, SCH40, XS, SCH80, XXS (for ANSI), and SGP (for JIS) Painting: varnish and black
