Pipe fittings confirming to DIN/EN877/ISO6594 Material:Cast Iron with flake graphite Qualilty:GJL-150 according to EN1561 Coating: SML,KML,BML,TML Size:DN40-DN300 The pipe fittings produced by our company have smooth surface, high density, no white, High strength, light weight, reasonable design in structure, beautiful externality used on high buildings and environmental protecting, strength corrosion-resistant coating for fittings SML DIN EN877/ISO6594 two-part epoxy resin painting fittings Internal and external painting: two-part epoxy resin painting, with an average dry thickness of 60-150 microns KML DIN EN877/ISO6594 Gray two-part epoxy resin powder coating fittings Internal and external painting: Grey two-part epoxy resin powder coating fittings, with an average dry thickness of 250 microns All pipe fittings are produced according to standard DIN19522/EN 877/ISO6594 and not inflammable and not combustible
Cast Iron Pipe confirming to DIN/EN877/ISO6594 Material:Cast Iron with flake graphite Qualilty:GJL-150 according to EN1561 Coating: SML,KML,BML,TML Size:DN40-DN300 The gray cast iron soil pipes produced by centrifugal technology which are used in drainage sewer system and ventilation ducts system through a flexible linkage. which have following advantages :flat straight,even pipe wall. high strength and density,high smoothness internal and external surface, no casting defect, easy installation, easy maintain, long using life, environmental protecting,fireproofing and no noise.
Chequered Plate material: A36 - S235JRÂ 3 mm Thickness 725 mm x 1600mm mtr 28.2 kgs each piece -
Chequered Plate material: A36 - S235JRÂ 3 mm Thickness 675 mm x 1600mm mtr 26 kgs each piece -
Punching Sheet perfoated Punching hole slot 0.35*4 mm material ss304 thickness 0.3-0.35 mm with 4 welding lines delivery time: 35 days more details reference customer drawing
Bridge slotted tubes, as photos Steel grade, carbã³n steel hot rolled q235jr. Welded mig/mag longitudinal and circunferential, plates bended length 1.5 meters or 2 meters.(based on tube size).
Aluminum Perforated Sheets thickness: 3mm open area: 40-50%
We absorbed the international advanced technology of tube making, like FFX and cage forming flexible formation technology etc, which apply CAD system to deformation process of welding pipe, which analysis and research the distortion craft of high grade steel pipe, also coordinated with high-performance welding machine to solve better the forming and welding defects that provide the high grade & high value-added welded pipe products for users.
Cold forming section steel production line is used to roll and form cold & hot rolling steel into all kinds of open cold-forming sectional steel like C-shaped steel, U-shaped steel, L-shaped steel and guard fence plates of freeway, etc. This line can also produce the different sizes of steel sheet piling used in the tunnel construction and foundation field. At the same time, it can work matching with the relative punching machine to satisfy more different requirement of clients.
In the process of manufacturing square pipes, rectangle pipes with direct shaping and molding technology, combined type rollers are used with pieces structure. Roller sleeves are filled between roller pieces. The pieces structure is used for rollers. In the deformation region, rollers contact strip steel partially not fully, reducing the contact area and reducing the friction between strip steel and rollers accordingly.
They are mainly used in fabrics, conductive plastics, antistatic brush, conductive or shielding materials, sintered felt, High temperature products, woven or nonwoven industries.
3d drawing connecting rod Odm works designing department have a solid performance record and specialize in industrial design and consumer product design. We provide all the services necessary to take your design from the concept stage through production. Our talented engineering staff is fully equipped to provide mechanical design, industrial design, and consumer product design services. Odm works have all the engineering resources available to meet your development needs. Our objective is to integrate state of the engineering technology with excellent customer service, allowing us to provide a cost effective design in a timely manner. If you have a new idea that you want to bring to reality or an existing design that needs improvement, we look forward to an opportunity to discuss it with you.
Pipeline characteristics: 1. The fungus and microorganism in the tap water or wastewater will not attach pipeline wall. 2. The inner coating of the pipeline is smooth; the fluid friction resistance is small. 3. The pipeline inner wall has excellent corrosion resistance. 4. The outer wall of the pipe coated with the single layer of polyethylene powder, flexible, resistant to bump, with a strong resistance to soil corrosion, green. 5. The design life of the inside and outside coating is up to 50 years. Mainly used in municipal water conservancy project (transport tap water, middle water, sewage), petroleum, chemical, natural gas, electricity, heat, sea water transport, coal and other fields. Apply to bury underground, overhead, underwater lying.
Inside and outside epoxy coated steel pipe to maximize the advantages of both steel pipe and plastic pipe. Not only have the mechanical properties of steel, high strength, high stiffness, but also have the advantages of plastic pipe, anti-corrosion, smooth pipe wall, not breeding micro-organisms, no incrustation, water resistance coefficient is small. Compare with normal steel pipe the average water supply increased by 10% -15%, reducing the power consumption of water supply by 15
3lpe coated steel pipe Polyethylene coated steel pipe The combination of the interfacial properties and chemical resistance of the epoxy coating with the mechanical protection properties of the extruded polyethylene anticorrosive layer, thereby significantly improving the respective properties. Pipe wall coated with fusion bonded epoxy ((fbe), to solve the problem of pipeline corrosion, pipe roughness is small, smooth wall, hydraulic performance is good
Spiral steel pipe supplier Mainly used in water projects, petrochemical industry, chemical industry, power industry, agricultural irrigation, and urban construction, one of the 20 key products developed by china. Hebei pulanke industrial technology co., ltd. Was established in 2006, is a professional anti-corrosion steel pipe manufacturing enterprise. Mainly engaged in inside and outside fbe(fusion bonded epoxy) coating steel pipe, inside fbe outside pe(polyethylene) coating steel pipe and winding 2pe\3pe anti-corrosion steel pipe
Polyethylene coated steel pipe Inner epoxy outer polyethylene anti-corrosion steel pipe is a kind of coated steel pipe, use the technique of internal spray epoxy powder, outer shower coating with polyethylene powder. The intermediate frequency-heating mode utilizes the waste heat of the tube to cure both at the same time, without separately coating the curing. Products inner coated with the food-grade epoxy, making the inner surface of the pipe more smoothly, not easy to breed microorganisms, to ensured the water quality and increased the flow rate. Outer shower coating with polyethylene powder, making the outer surface of plastic layer thickness increases, corrosion resistance is more remarkable
Anti-corrosion steel pipe Inside and outside epoxy coated steel pipe Plastic-coated steel pipe Also has a good hygienic function, corrosion resistance, able to adapt to -30, -100 , temperature range. Mainly used in municipal water conservancy project (transport tap water, middle water, sewage), petroleum, chemical, fire, seawater transport and other fields
Inner ep outer pe coated Inside epoxy outside 3 layer pe steel pipe 3pe coating is based on fusion bonded epoxy (fbe) as the bottom, the adhesive for the middle layer and extruded polyethylene for the outer sheath of the simultaneous winding or extrusion and become a whole. Integrated the excellent performance of epoxy coating and extruded polyethylene two anti-corrosion layer
Spiral steel pipe Spiral steel pipe is a strip steel as raw material, extrusion forming at normal temperature, automatic double wire double-sided submerged arc welding process welded spiral seam steel pipe. Mainly used in water projects, petrochemical industry, chemical industry, power industry, agricultural irrigation, and urban construction, one of the 20 key products developed.
