Suction /Discharge: 2''/1.5'' Flowrate: 10--65m3/hr Head: 9--60m Material of Wet-end Parts: ASTM A532 Impeller: 5-Vane, Open, 184mm Maximum Passable Solids: 19mm Motor Power: 2.2kW -- 15 kW
Suction Discharge: 1.5'' 1'' Flowrate: 10--38m3/hr Head: 5--85m Material of Wet-end Parts: ASTM A532 Impeller: 5-Vane, Open, 152mm Maximum Passable Solids: 14mm Motor Power: 2.2kW -- 15 kW
Long Teng horizontal slurry pump Application: M, SH, HH series pumps contain cantilever and horizontal centrifugal pumps,which apply to transport slurry with strong corrosion proof and high concentration for such industries as metallurgy, mine, coal, power, building etc. This kind of pump can be used in multi-stages. slurry pump for sale body consist of replaceable metal or rubber lining and its impeller is made of wear resistant metal or rubber. HH series lining and impeller are made of wear resistant metal.The shaft seal of M, SH and HH series pump may adopt packing seal or centrifugal seal.Pump outlet can be spaced by 45ã??and installed by rotating eight different angles as per requirement. slurry pump manufacturers SELECTION: Selection As Per Performance Curve @ M, SH series High concentration, High corrosion slurry, Capacity: 40~80% Medium concentration, Medium corrosion slurry, Capacity: 40~100% Low concentration, Low corrosion slurry, Capacity: 40~120% @ HH Series Medium concentration, Medium corrosion slurry, Capacity: 40~80% Low concentration, Low corrosion slurry, Capacity: 40~100% (Maximum efficiency point Capacity is 100% under certain rotation speed.)
Tobee TH Slurry Pump Size: 1" to 22" Capacity: 3.6-5400 m3/h Head: 6-125 m Handing solids: 0-130mm Concentration: 0%-70% Materials: Hyper chrome alloy, Rubber, Polyurethane, Ceramic, Stainless steel etc.
Capacity:360-1520 m3/h Head:11-58 m Speed:400-850 r/min Efficiency:60-72% NPSH:2-4.5 m Max diameter of flowed particel:220 mm Inlet diameter:300 mm Outlet diameter:250 mm This series pumps are contain cantilever and horizontal centrifugal pumps which apply to transport slurry with strong corrosion proof and high concentration.
Capacity:1260-2772m³/h Head:13-63m Speed:300-600r/min Max. Eff:77% This series pumps are contain cantilever and horizontal centrifugal pumps which apply to transport slurry with strong corrosion proof and high concentration.
Slurry pump can be widely used in mines, electric power, metallurgy, coal, environmental protection and other industries transport slurry containing abrasive solid particles.Such as metallurgical mill pulp conveying, hydraulic ash thermal power plants, coal washery coal slurry and heavy media delivery, dredging river, river dredging, etc.In the chemical industry, also can carry some corrosive slurry containing crystallization. This series pumps are contain cantilever and horizontal centrifugal pumps which apply to transport slurry with strong corrosion proof and high concentration.
Slurry pump can be widely used in mines, electric power, metallurgy, coal, environmental protection and other industries transport slurry containing abrasive solid particles.Such as metallurgical mill pulp conveying, hydraulic ash thermal power plants, coal washery coal slurry and heavy media delivery, dredging river, river dredging, etc.In the chemical industry, also can carry some corrosive slurry containing crystallization. This series pumps are contain cantilever and horizontal centrifugal pumps which apply to transport slurry with strong corrosion proof and high concentration.
TH series metal and rubber slurry pumps are designed for the most difficult pumping applications. Extra sections at wear point and perfect impeller structure ensure satisfactory performance with long life. Rubber linered pumps expand application to chemical products handling,several different rubber options are available to meet different application need. Mill Discharge Coarse sand Coarse tailings Phosphoric acid Mineral concentrate Heavy media Fine tailings Coal FGD This series pumps are contain cantilever and horizontal centrifugal pumps which apply to transport slurry with strong corrosion proof and high concentration. You can me your working datas and requirements,then we would choose the suitable pumps for you.
HUATAO supplying different type pump for paper plant,welcome to contact us if you are looking more details: used for deliver ,lifting & pressuringthe pulp material & medium in alkali recovery industrial processes. Non-clogging centrifugal pump sizing pump low pluse pulp pump Non-clogging pulp pump without leakage Two-phase flow pulp pump
TH series metal and rubber slurry pumps are designed for the most difficult pumping applications. Extra sections at wear point and perfect impeller structure ensure satisfactory performance with long life. Rubber linered pumps expand application to chemical products handling,several different rubber options are available to meet different application need. Mill Discharge Coarse sand Coarse tailings Phosphoric acid Mineral concentrate Heavy media Fine tailings Coal FGD
Capacity:360-1520 m3/h Head:11-58 m Speed:400-850 r/min Efficiency:60-72% NPSH:2-4.5 m Max diameter of flowed particel:220 mm Inlet diameter:300 mm Outlet diameter:250 mm
Capacity:1260-2772m³/h Head:13-63m Speed:300-600r/min Max. Eff:77%
Slurry pump can be widely used in mines, electric power, metallurgy, coal, environmental protection and other industries transport slurry containing abrasive solid particles.Such as metallurgical mill pulp conveying, hydraulic ash thermal power plants, coal washery coal slurry and heavy media delivery, dredging river, river dredging, etc.In the chemical industry, also can carry some corrosive slurry containing crystallization.
High-Pressure ISW Series Pipe Centrifugal Water Pump Product Features: This product is of horizontal structure, used for conveying clean water and other liquid with similar physical, and chemical properties to clean water. It is suitable for industrial and urban water supply and drainage, pressurized water delivery in high-rise buildings, sprinkler irrigation in gardens, pressurized fire fighting, long-distance transportation, heating ventilation air conditioning circulation, bathroom, and other pressurized cooling, and heating water circulation and supporting equipment. ISW series single stage end suction centrifugal pump is an energy-saving pump. The advantage is hydraulic capability is distributed reasonably, wide option for user, conveniently check and repair, the efficiency and throw is up to advanced international level. This pump is suiable for industrial and city water supply, water drainage.
The ISG vertical inline centrifugal pump is an excellent hydraulic model selected by our company's scientific and technical personnel and internal water pump experts. It adopts the performance parameters of the IS type centrifugal pump and is designed by ingenious combination on the basis of general vertical pumps. At the same time, suitable hot water, high temperature, corrosive chemical pumps and oil pumps are derived from the ISG type according to the use temperature and medium. ISW ISG series pump are horizontal  vertical single stage single suction  centrifugal pipeline pumps. They are widely used in industry and urban water supply and drainage, high rise building pressurization water supply, garden sprinkler irrigation, fire pressurization, long-distance water supply, heating, bathroom cooling and heating water circulation pressurization, and equipment matching, etc for transporting clean water  and other liquids with physical and chemical properties similar to clean water. The temperature of the medium conveyed by the ISW ISG type pipeline pump shall not exceed 80 C, the ambient temperature shall not exceed 40 C and the relative humidity shall not exceed 95%.
Heavy duty submerged slurry pumps are vertical, shaft driven centrifugal slurry pumps designed for transferring abrasive and high density slurries from sumps, pits and other submersible source. The position of the shaft of the vertical slurry pump is perpendicular to the horizontal plane, the pump end is under the water and the motor above the liquid level. Features -The rotor parts can be adjusted axially and supported by multiple points, so heavy duty cantilever sump pump can operate steadily and reliably. -The pump adopts a long shaft structure and can be inserted up to 10 meters deep. Shaft coupling is safe and reliable. Convenient disassembly. -The impeller is immersed in the medium when the pump starts, so it is easy to start, and there is no air exhaust problem. -The outlet flange is a half movable flange for easy connection. Series SP(R) slurry pump is centrifugal vertical sump pump, work under fluid. It widely used for delivery abrasive, high density slurry with large particle in the metallurgy, mine, power plant, chemical, and other industry. Shijiazhuang Jiemu Machinery Equipment Co.,Ltd is one of the leading private indenting firms of China having 15 years of experience in Mining, Fluid Transportation and Fire Emergency Field. It works on design theory of slurry pump and water pump, experimental researches of pump performance wear mechanism and new products developing, and involves in research, design, manufacturing and sales.
Equivalent Andritz S pump spare parts including: Impeller (2 vanes, 3 vanes, 6 vanes, 8 vanes), Volute Casing, Casing Cover, Front Lining, Rear Lining, Stuffing Box Body, Shaft Wear Sleeve etc which for Andritz S series paper-pulp pumps. Paper Stock Pulp Pumps and Wearing Spares working advantages: 1. High efficiency and energy saving: The operating efficiency is 3-10 percentage points higher than that of ordinary pulp pumps on average, and the energy saving and consumption reduction reach 15-30%. 2. Good cavitation performance and long service life: the actual service life can be 2-3 times longer than that of ordinary pulp pumps; 3. High concentration and no clogging: the pulp concentration can reach 6%; 4. Reasonable structure and convenient maintenance: The pump head part adopts a front and rear door-opening structure. There is no need to disassemble the pipeline during maintenance. The pump can be disassembled and repaired by simply moving the motor backward.
SP/SPR heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available. Vertical Sump Slurry Pumps Spare Parts Design features: â?¢ Fully Cantilevered - Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require. â?¢ Impellers - Unique double suction impellers; fluid flow enters the top as well as the bottom. This design eliminates shaft seals and reduces thrust load on the bearings. â?¢ Large Particle - Large particle impellers are also available and enable passing unusually large solids. â?¢ Bearing Assembly - The maintenance friendly bearing assembly has heavy duty roller bearings, robust housings, and a massive shaft. â?¢ Casing - The metal pumps have a heavy walled abrasive resistant Cr27Mo chrome alloy casing. Rubber pumps have a molded rubber casing adhered to sturdy metal structures. â?¢ Column and Discharge Pipe - The metal pump columns and discharge pipes are steel, and the rubber columns and discharge pipes are rubber covered. â?¢ Upper Strainers - Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump. â?¢ Lower Strainers - Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles.
Shijiazhuang Jiemu Machinery Equipment Co.,Ltd. This Series of Slurry pumps are used conveying abrasive or corrosive slurry, especially clinker of power plants in electric power, bardge,flue gas desulphurization, metallurgy, mineral processing, mining tailings, coal washing, coal ash, paper and pulp, ball mill, filter press.