Para-Aramid Industrial Felt Strip For Aluminum Extrusion Description Kevlar Pad Is made of 100% Kevlar fiber acupuncture,the color is yellow, the disintegration temperature is 480-500 â??, mainly used for extrusion of aluminum extrusion line on a moving beam of the cooling bed, with high temperature, wear-resistant, High density, non-delamination, lint-free, non-polluting aluminum profiles. Specificationï¼? Material:100%Kevlar Work Temperature:500°C Size:Make-to-order Usage:Aluminum Extrusion Initial Table Color:Yellow Hardness:Adding Resin Or Not Shape:Strip Technics:Needle Punched Applicationï¼? Similar to kevlar conveyor belt,applied to high-temperature region of translation step cooling table
Dryer screen dries paper web after passing a press section by adhering the web to a steam heated cylinder. Material: PET, PA, PPS. Used in the dryer section of paper machine to produce newprint paper, writing paper, carbonless paper, copper print, etc. Seam type: Insert, pin, ping ring, spiral ring join. Feature: 1. Long service life, wear resistance, the net loss is low. 2. High fatigue resistance, acid, weak alkali resistance. 3. The mesh mark light, forming quality is good. 4. Light weight, easy to transport, set net easy operation.
Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths. Corrugator belts Inwoven Aramid Edge -Features Suitable as top belt with high speed (above 150 m/min) production Heat and super tear resistance Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime. Particularly for frequent changes of board width Mostly used for all Corrugating Production Lines. Corrugator belts Inwoven Aramid Edge- Specification Product Corrugator Belt Inwoven Aramid Edge Thickness 8mm-10mm Width range 1000mm - 3200mm Length 80 meters Heat-resistance 240 (the kevlar edge upto 350) Tensile strength 70Mpa Coefficient of friction 0.40µ Weight per unit (7.5±0.3)kg/ Air-permeability 40mm water Column 2.0m min Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm or 200mm inwoven aramid edge reinforcement (kevlar) Suitable position Top belt Lifetime 50-70 million meter Used on all corrugators high tearing resistance Long life time running High abrasion resistance Moisture absorption Heat resistance Low noise Corrugator Belts with Silicone Coating Technical Parameters Product High Speed Corrugator Belt Thickness 9mm Width range 1400mm - 3200mm Length 80 meters Heat-resistance 240�ºC (the kevlar edge upto 350�ºC) Tensile strength 70Mpa Coefficient of friction 0.40µ Weight per unit (7.5±0.3)kg/m2 Air-permeability 40mm water Column 2.0m³/m2/min Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm -400mm inwoven aramid edge reinforcement (kevlar) Suitable position Top belt,Bottom belt,Upper belt ,Lower belt
Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths. Corrugator belts Inwoven Aramid Edge -Features Suitable as top belt with high speed (above 150 m/min) production Heat and super tear resistance Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime. Particularly for frequent changes of board width Mostly used for all Corrugating Production Lines. Corrugator belts Inwoven Aramid Edge- Specification Product Corrugator Belt Inwoven Aramid Edge Thickness 8mm-10mm Width range 1000mm - 3200mm Length 8Suitable position Top belt,Bottom� belt,Upper belt ,Lower belt
Corrugator Belt & Spare Parts Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths. Corrugator belts Inwoven Aramid Edge -Features Suitable as top belt with high speed (above 150 m/min) production Heat and super tear resistance Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime. Particularly for frequent changes of board width Mostly used for all Corrugating Production Lines. Corrugator belts Inwoven Aramid Edge- Specification Product Corrugator Belt Inwoven Aramid Edge Thickness 8mm-10mm Width range 1000mm - 3200mm Length 80 meters Heat-resistance 240 (the kevlar edge upto 350) Tensile strength 70Mpa Coefficient of friction 0.40 Weight per unit (7.50.3)kg Air-permeability 40mm water Column 2.0mmin Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm or 200mm inwoven aramid edge reinforcement (kevlar) Suitable position Top belt Lifetime 50-70 million meter Used on all corrugators high tearing resistance Long life time running High abrasion resistance Moisture absorption Heat resistance Low noise Corrugator Belts with Silicone Coating Technical Parameters Product High Speed Corrugator Belt Thickness 9mm Width range 1400mm - 3200mm Length 80 meters Heat-resistance 240C (the kevlar edge upto 350C) Tensile strength 70Mpa Coefficient of friction 0.40 Weight per unit (7.5 0.3)kg/m2 Air-permeability 40mm water Column 2.0m m2/min Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm -400mm inwoven aramid edge reinforcement (kevlar)
Specification Material of Polyester Spiral Mesh Belt,100% polyester Small loop,Middle loop,Big loop,etc Mainly used in paper making,rubber thread production, printing and dyeing, food, pharmaceutical, ceramics and sold & liquid separation industry, mine, metallurgy and other fields. Polyester Spiral Mesh Belt,also named Polyester Spiral Belt,Spiral Link Dryer Screen spiral synthetic fabrics,polyester spiral link dryer fabric(SLDF),polyester spiral dryer screen. It can be devided into small loop,medium loop,large loop,etc Features Large air permeability with long life time. Flat surface and Good Strength. High temperature resistance,abrasion resistance and aging resistance
Polyester Linear Screen Mesh Belt, also called linear screen cloth, plain woven belt, polyester mesh belt. Weaving Type: 2-shed & 3-shed Description: For 2 shed: its structure is Plain Weave Structure. For 3 shed: its structure is Twill Weave Structure. Application Polyester Linear Screen Mesh Belt are mainly used in mining industry screening and separating; food industry's filtration and drying,such as  biscuit drying, tea drying, seeds drying, fruit drying; pulp washing in paper mills; fruit juice making,etc More details contact us:
Description: Spunlace Mesh Belt,also named Spunlance Nonwoven Forming Belt, Formation Belt,Spunlace spin belt Conveyor Belt for Spunlace Nonwoven Fabric ,is the cricial accessories of spunlance equipment. The selection configuration has the considerable influence for the user to improve the quality of spunlance nonwoven fabric. As per different process requirement for spunlace nonwoven fabric or different section (Pre-wet section, drum section and Platform section) for spunlace equipment. Our Spunlace Nonwoven Forming Belt has different mesh and air permeability. Material: 100% Polyester or Polyester + Stainless Steel,etc
Specification Material polyamide and PPS monofilament Huatao Model HT121104,HT15905,HT06124 Mainly used for chemical industry,pharmaceutical industry,etc. Description: Alkali Resistant Filter Belt Cloth,also can be named alkali resistance filter cloth,press filter belt. It is professional unique design and weaving from polyamide &PPS yarns, mainly working temperature over 100â??, the alkalinity sodium hydroxide filtration press industry, excellent running performance under high tensile strength and wear resistance� . � Application Widely used in wastewater treatment of chemical industry, pharmaeutical process,etc.
PBO Roller Covers Felt For Aluminium Extrusion is the density of the PBO layer enables the rollers to work continuously under temperature 600,and at the same time to stand the abrasion from different shapes of the profile.Super high temp. resistance Felt Roller,Suitable for use before fly cut.Effectively improve the scratch mark made by the graphite. PBO Roller Covers Felt For Aluminium Extrusion Advantage 1.Temperature resistance 600°C 2. The Blanket has no joint as a whole and there is no break zone 3. Small weight, convenient storage 4. Easy to install, everyone can operate 5. The surface is soft and flat, will not scratch the profile PBO Roller Covers Felt For Aluminium Extrusion Application Applied to aluminum profile extrusion machine run out table and walking beams,Max temperature resistance 600.
Our High Temperature Felt Conveyor Belt are specially designed for aluminum profile production plants and are used in conveyor belts for belt-shaped belts. Our felt is available in 4 materials: PBO, Kevlar, Nomex, Polyester, which can withstand different operating temperatures: 600, 500, 280, 180, which could meet the needs of the entire production process. Overall seamless design better protects the aluminum profile from scratching and greatly improves the aesthetics of the product.
HEAT TRANSFER PRINTING FELT BELT Our Heat Transfer Printing Felt BELT imported DuPont Aramid 1313, the middle fabric for high-performance industrial silk fabric. It can work under 250°C. After the use, the shrinkage of width is 3% max, the elongation is 3%, the weight is 3300g/m2, the thickness could be 8mm, and can also be customized thicker type according to customer's demand. The thickness could be 3600g/m2. Which is a special blanket for transfer printing of various fabrics, curtain fabrics, and decorative fabrics. Specifications can be customized according to customer needs. PRODUCT ADVANTAGE 1.Specially added seamless base fabric, the base fabric is endless industrial silk. Testing report showed the misaligned rate is about ±3mm. - will avoid misaligned problem. 2.The base fabric can control the shrinkage rate in 2.5%--3%. - will avoid the belt not suitable for the machine. 3.100% DUPONT Nomex - improve working life and end product quality. PRODUCT APPLICATION Our heat transfer printing belt is mainly used for various of roll to roll heat transfer printing machine, roller printing machine, such as Klieverik, Monti, Transmatic, Lemaire, Practix, Sorim, Studio FX, Stork, Bates, Wuppertal, Kristall, Sublistatic, Gessner, Bizmak, S.T.M., Singer, KMT, MOGK, TURAL MAKINA...
Needle corrugator belt is producted by professional needle machine with advanced technic. According to the requirement of corrugated paper board production line, the corrugator belt is made of high grade pet fiber & nomex fiber to meet the high temperature and high stength and each belt must be heat-setting and chemical treatment to guarantees the stabily size. Property : High temperature resistance Aging resistance Even surface Stable size Long life time Specification: Material: 100%pet Manufacturing process: needle Thickness:7-10mm Width: 1.4m-3.0m Heat resistance:200
Nonwoven corrugating belt with teflon Nowoven corrugating belt with teflon gives the belt better resistance to tension. It is a modern belt for high speed machines of a new generation. Its high permeability enhances the atness and quality of board. Its reinforced pattern allows a very good life on machine. The lf (low friction) nishing was developed for shoe press applications and lower energy consumption. Nowoven corrugating belt with teflon features 1.High temperature resistance 2.Aging resistance 3.Even surface 4.Stable size 5.Long life time 6.Can produce belts at customers` requests
High speed corrugation belt High speed corrugation beltis made of the high grade pet continuous filament yarn with high tension and low flexibility.Our specifical structure design ensure the hydrophilic and drying ability.High speed corrugation belt are special use in the heating and tracking section all kinds famous corrugators. Include bhs / agnati / mhi / mit / marouip / tcy / isowa and more china corrugator machine. Material: 100%pet Manufacturing process: woven Thickness:7-10mm Width: 1.4m-3.2m Heat resistance:200
High speed corrugation belt is made of the high grade pet continuous filament yarn with high tension and low flexibility.Our specifical structure design ensure the hydrophilic and drying ability. High speed corrugation belt are special use in the heating and tracking section all kinds famous corrugators. Include bhs / agnati / mhi / mit / marouip / tcy / isowa and more china corrugator machine. Specifications: Material: synthetic material Thickness: 9mm Wdith range: 1000mm - 3200mm Heat resistance :240, edge upto 350 Weight : 7.5kg Suitable speed 200m/min Seam: hot jaw lacing with flocking fastener clipper with rubber
Normal edge corrugator belt Normal edge corrugator belt made of the high grade pet continuous filament yarn with high tension and low flexibility.Our specifical structure design ensure the hydrophilic and drying ability. Features Suitable for averange liner machine speed Longlife time running Suitable as a top and bottom belt Specifications: Material: synthetic aterial Thickness:9 mm Wdith range:1000mm - 3200mm Heatresistance:220 Weight:7.5kg/ Suitable speed:250m/min Seam:hot jaw lacing with flocking fastener clipper withrubber Widely used for heavy board and double wall
Normal edge corrugator belt Normal edge corrugator belt made of the high grade pet continuous filament yarn with high tension and low flexibility.Our specifical structure design ensure the hydrophilic and drying ability. Features Suitable for averange liner machine speed Longlife time running Suitable as a top and bottom belt Specifications: Material: synthetic aterial Thickness:9 mm Wdith range:1000mm - 3200mm Heatresistance:220 Weight:7.5kg/ Suitable speed:250m/min Seam:hot jaw lacing with flocking fastener clipper withrubber Widely used for heavy board and double wall
Needle corrugator belt is producted by professional needle machine with advanced technic. According to the requirement of corrugated paper board production line, the corrugator belt is made of high grade pet fiber & nomex fiber to meet the high temperature and high stength and each belt must be heat-setting and chemical treatment to guarantees the stabily size. Property : High temperature resistance Aging resistance Even surface Stable size Long life time Specification: Material: 100%pet Manufacturing process: needle Thickness:7-10mm Width: 1.4m-3.0m Heat resistance:200
Nonwoven corrugating belt with teflon Nowoven corrugating belt with teflon gives the belt better resistance to tension. It is a modern belt for high speed machines of a new generation. Its high permeability enhances the atness and quality of board. Its reinforced pattern allows a very good life on machine. The lf (low friction) nishing was developed for shoe press applications and lower energy consumption. Nowoven corrugating belt with teflon features 1.High temperature resistance 2.Aging resistance 3.Even surface 4.Stable size 5.Long life time 6.Can produce belts at customers` requests
