It has excellent properties of penetration, softening, emulsification, antistatic, biodegradation and sterilization. Good chemical stability, heat resistance, light resistance, pressure resistance, strong acid and alkali resistance. Used as natural and synthetic rubber, silicone oil and asphalt emulsifier; Antistatic agent and softener for synthetic fiber, natural fiber and glass fiber; A conditioner for hair conditioner. Items Specifications Main content 99.0%min,99.5%min Loss on drying 0.50% max Water Insoluble 0.05% max Chloride 0.20% max,0.50% max Iodide 0.001%max,0.01%max Sulphate 0.005%max pH 4.5-6.0 Pb 0.2ppm max,0.5ppm max Fe 0.5ppm max Cu 0.5ppm max Bi 0.2ppm max As none,0.4ppm max
Azelaic Acid has antibacterial properties and can be used as a food preservative. Use in mouthwashes is conducive to the prevention and treatment of dental caries, and use in soap can prevent the surface of soap from cracking. It has good permeability to the skin, and it can increase the absorption function of the skin when used in cream cosmetics. Azelaic Acid has a variety of medicinal effects and can be used in skin plasters. It has skin lightening and whitening functions.
Ferulic acid has a high content in traditional Chinese medicines such as Ferulic acid Angelica sinensis Chuanxiong Cimicifuga and Suanzaoren One is obtained from the combination of ferulic acid and some small molecules the second is obtained from the plant cell wall and the third is obtained through tissue culture Ferulic acid in plants is often crosslinked with polysaccharides and lignin through ester bonds or selfesterified or etherified to form di ferulic acid Generally alkaline and enzymatic methods are used to break the ester bonds to release ferulic acid and then suitable solvents are used for extraction Item Specifications Results Appearance White or lightyellow acicular crystal Passed Melting point 172 01760C 17261748C Loss on drying 050 016 Residue on ignition 010 004 Heavy metals 10PPM Passed Unspecified impurities 010 Not detected Total 050 Not detected Contents 990 1000 Conclusion Conforms
Product Description Tripotassium Phosphate Product Description Other name: Tripotassium orthophosphate CAS Registry Number: 7778-53-2 EINECS NO.: 231-907-1 MF: K3O4P MW: 212.27 InChI: 1S/3K.H3O4P/c;;;1-5(2,3)4/h;;;(H3,1,2,3,4)/q3*+1;/p-3 Melting point: 1340�ºC Water solubility: 50.8G/100ML(25�ºC) Density: 2.564g/cm3 Appearance:white or off-white crystalline powder, soluble in water and its water solution is alkaline,insoluble in alcoholic, corrosive and hygroscopic
Hexamethylene or methenamine is a heterocyclic organic compound with the formula (CH2)6N4. This white crystalline compound is highly soluble in water and polar organic solvents. It has a cage-like structure similar to adamantane. It is useful in the synthesis of other chemical compounds, e.g., plastics, pharmaceuticals, rubber additives. It sublimes in vacuum at 280 �°C. Application The dominant use of hexamethylenete tramine is in the production of powdery or liquid preparations of phenolic resins and phenolic resin moulding compounds, where it is added as a hardening component. These products are used as binders, e.g. in brake and clutch linings, abrasive products, non-woven textiles, formed parts produced by moulding processes, and fireproof materials. Medical uses As the mandelic acid salt (methenamine mandelate) or the hippuric acid salt (methenamine hippurate), it is used for the treatment of urinary tract infection. Histological stains Methenamine silver stains are used for staining in histology, Solid fuel Together with 1,3,5-trioxane, used by campers, hobbyists, and relief organizations for heating camping food. Reagent in organic chemistry Hexamethylene is a versatile reagent in organic synthesis. It is used in the Duff reaction (formylation of arenes), the Sommelet reaction (converting benzyl halides to aldehydes), and in the Delepine reaction (synthesis of amines from alkyl halides). Explosives Hexamethylene is the base component to produce RDX
Chemical Name:Methyl eugenol Synonyms: 1,2-Dimethoxy-4-(2-propenyl)benzene; 4-Allyl-1,2-dimethoxybenzene; 4-Allylveratrole Cas No:93-15-2 Molecular Formula:C11H14O2 Molecular Weight:178.23 Appearance: Colorless to pale yellow liquid Purity: 98%
Phenol is an organic compound with C6H5OH. It is a colorless needle -shaped crystal with a special smell. It is toxic and is an important raw material for producing certain resins, sterilization agents, preservatives, and drugs (such as aspirin). It can also be used for the treatment of sterilized surgical equipment and excrement, skin sterilization, itching and otitis media. The melting point is 43 �° C, which is slightly soluble at water at normal temperature, and is easily soluble in organic solvents. When the temperature is higher than 65 �° C, it can solve the water in any proportion. The phenol is corrosive. After contact, the local protein degenerates. The solution can be washed with alcohol with alcohol. A small part of the phenol is exposed to the air by oxidation into pink. When the three -price iron ion becomes purple, this method is usually used to test the phenol.
Product name Ceramides CAS NO. 100403-19-8 Other names CAPROYL SPHINGOSINE Molecular weight 397.63488 Molecular formula C24H47NO3 Purity 99% Appearance Powder Storage Cold dry place Package 25kg/drum Ceramide is a class of phospholipids with ceramide as the skeleton, mainly choline ceramide phosphate and ethanolamin ceramide phosphate, phospholipids are the main components of cell membranes, 40%~50% of sebum in the stratum corneum is composed of ceramide, neurochemicalbook amide is the main part of the intercellular matrix. It plays an important role in maintaining the balance of water in the stratum corneum. Ceramide has a strong ability to associate water molecules, which maintain skin moisture by forming a network structure in the stratum corneum. Therefore, ceramides have the effect of retaining moisture in the skin.
Benefits of Tranexamic Acid The whitening mechanism of tranexamic acid is to rapidly inhibit the activity of tyrosine chymase and melanocytes at the same time and reduce the accumulation of melanin. For melanin precipitation, tranexamic acid also has a good effect. Used Widely used in skin creams, eye creams, serums and other skin care products. Moisturizing Lotion, Facial Cleanser, Skin Cream, Massage Cream, Mask. Tranexamic Acid is a synthetic amino acid that functions as a skin-conditioning agent and astringent. In cosmetics, it functions on skin as a barrier repair ingredient and seems able to help skin recover from damage. It an effective skin lightener when used in cosmetic formulations. Application Cosmetics: Whitening effect Clinical studies for years have proved that tranexamic acid can dilute spot effectively and rapidly, which helps to demonstrate a perfect white and bright skin. The spot-removing effect of tranexamic acid is about 50 times over Vitamin C, and 10 times over AHA. The concentration limit of usage is 2%-3%, and in cosmetics the amount is around 0.5%.
Product Name Phenylethyl Resorcinol Other Name Symwhite 377 Powder Einecs No. 480-070-0 purity 99%min CAS NO 85-27-8 MW 214.26 MF C14h14o2 Color White Test HPLC Storage Temperature Cool Dry Place Phenylethyl Resorcinol is served as a newly lightening and brightening ingredient in skin care products with better stability and security, which is widely used in whitening, freckle removing and anti-aging cosmetics. 1. It has an outstanding whitening effect to skin. It is reported that it is one of the highest active tyrosine kinase inhibitors, which is 22 times higher than Kojic acid. 2. It is an antioxidant that is considered effective in influencing the formation of pigmentation, B16V, which is 210 times better than Kojic acid and 32 times than Arbutin. It could balance skin color and relieve the chromatosis caused by ultraviolet. 3. It served as an anti-oxidant agent with better performance, which is better than VE/VC/BHT 4. It is easily dissolved with dissolvability of 1% in glycol and easy to be added. Meanwhile it has better stability and security. 5. Dosage: 0.1-1.0%
Glabridin is a chemical compound that is found in the root extract of licorice (Glycyrrhiza glabra). Glabridin is an isoflavone, a type of isoflavonoid. This product is part of a larger family of plant-derived molecules, the natural phenols. It is used as an ingredient in cosmetics and is listed in International Nomenclature of Cosmetic Ingredients (INCI). Glabridin is yellowish-brown powder. It is insoluble in water, but soluble in organic solvents. Application&Function 1.Glabridin has depigmentation and properties. It inhibits the production of melanin, the pigment responsible for the colouring of the skin. 2.Studies have shown positive effects in fields like LDL (low-density lipoprotein) protection against oxidation. 3.Glabridin inhibits the inflammatory reaction by blocking cyclooxygenase and preventing the formation of free radicals such as superoxide anions. 4.At the same time Glabridin prevent rough skin and also has anti-inflammatory, antibacterial effect.
1. Description: It is the raw material for making thermosetting resin, light curing epoxy resin coating, oil resistant coating and drying coating. Its copolymer emulsion is used for fiber finishing, fabric, leather and paper coating. Also used as wood, metal and other adhesives. 2. Typical recipes Used as crosslinked monomer in acrylic emulsion. The amount of carboxyl-containing acrylic emulsion pressure-sensitive adhesive is L % ~ 2% of the total monomer mass, and the initial adhesion will be greatly reduced if it exceeds 3%. For emulsion adhesives without carboxyl group, the general dosage is not more than 5%. The crosslinking reaction temperature of MMAM alone is high, generally 120 ~ 170�ºC, and the addition of protic catalyst can reduce the crosslinking temperature. Acrylic acid (AA) can both provide hydrogen protons and copolymerize with acrylates, so MMAM should be used as a composite crosslinking agent with AA at a dosage of 3:2. Cross-linking agent HA can replace N- hydroxymethyl acrylamide, and does not contain formaldehyde. 3. Application scope A. Can be used as crosslinking agent, widely used in fiber modified resin, processing dyes, plastic adhesives, soil stabilizers, etc. B. Used for fiber modification, resin processing, adhesives and paper, leather, metal surface treatment agent. Free samples 4. Storage and packaging A. All emulsions/additives are water-based and there is no risk of explosion when transported. B. This product can be packed in 25KG,50KG,200KG,1000KG plastic barrels. C. Store sealed in a cool, dry and ventilated place indoors. Before use, the container should be strictly sealed after each use. D. The product should be well sealed during transportation, moistureproof, alkali strong acid and rain water and other impurities mixed.
INCI Adopted Name: Caprylic / Capric Triglyceride Synonyms: Octanoic/decanoic acid triglyceride CAS No.: 73398-61-5 / 65381-09-1 EINECS No. 277-452-2 / 265-724-3 Molecular Formula: C21H40O5 Molecular Weight: 372.54 Item Specification Appearance A colorless or slightly yellow oily liquid Lodine Value (mgI2/100g) â?¤1.0 Acid Value (KOH/g) â?¤0.1 Saponification Value 325~360 Specific Gravity 0.940~0.955 Heavy Metal (Pb) mg/kg â?¤10 (As) mg/kg â?¤2 Peroxide Value â?¤1.0
Cetyl alcohol is a versatile ingredient that can serve as an emollient, emulsifier, thickener, binder, foam booster, or emulsion stabilizer, depending on the formulation and need. It is derived from coconut or palm oil as well as being synthetically manufactured. Suitable for various cosmetics, as a base, especially suitable for creams and lotions; 1. Hair and skin care. 2. It is also used as a raw material for textile auxiliaries in industry. 3. In industry, it is also used as a raw material for textile auxiliaries. Used in daily chemical, plastic, textile, pesticide, machinery, ore flotation industries.
Product name 4'-Hydroxyacetophenone CAS 99-93-4 Molecular Formula C8H8O2 Molecular weight 136.15 Appearance White Powder Purity 99% Usage for 4'-Hydroxyacetophenone: The product is an organic synthetic intermediate used in the production of spices. Hydroxyacetophenone is also a cholagogic agent. Storage for 4'-Hydroxyacetophenone: Stored in a dry and ventilated warehouse; keep away from sunshine; avoid fire; avoid moisture.
Product name Ethylhexylglycerin CAS number 70445-33-9 Molecular formula C11H24O3 Molecular weight 204.31 Appearance Colorless liquid Purity 99.0% Description Ethylhexylglycerin is an alkyl glyceryl ether. This means that the ethylhexyl group is bound to glycerin at one end by an ether linkage. Although they are also alkyl glyceryl ethers, Batyl Alcohol and Chimyl Alcohol (may also be called Cetyl Glyceryl Ether) have traditionally been used as cosmetic labeling names for these alkyl glyceryl ethers. Glyceryl Lauryl Ether and Isostearyl Glyceryl Ether are also alkyl glyceryl ethers that may be used in cosmetic products.
Melting point -40 �°C (lit.) Boiling point 197 �°C (lit.) density 0.925 g/mL at 25 �°C (lit.) vapor density 4.1 (vs air) vapor pressure 0.02 mm Hg ( 20 �°C) refractive index n20/D 1.427(lit.) Fp 201 �°F storage temp. Store below +30�°C. solubility H2O: 1 M at 20 �°C, clear, colorless form Slightly Viscous Liquid pka 15.10�±0.29(Predicted) color Clear PH 6-8 (25�ºC, 1M in H2O) Odor Ammonia-like. explosive limit 1-9.9%(V) Water Solubility soluble 2-Methyl-2,4-pentanediol (MPD) is a diol organic compound with a chiral carbon atom. It is a colorless liquid at room temperature and can be Diacetonee alcohol is hydrogenated. The appearance is colorless liquid with mild sweetness. It is miscible with water, soluble in ethanol, and soluble in most organic solvents.
The primary product of this product is widely used in polyurethane coatings, in addition, it is also used in waterproof materials, sealing materials, pottery materials, etc.;polyurethane foam plastics made of this product are used for warmth (cold), building materials, parts of vehicles and ships ; Refined products can be made into car bumpers, buffers, synthetic leather, non-plastic polyurethane, polyurethane elastic fiber, non-plastic elastic fiber, bo film, adhesive, etc.
Carbopol, also called CarbCarbopol, also called Carbomer or Carboxypoly-methylene is a generic name for synthetic high molecular weight polymers used as thickening, dispersing, suspending and emulsifying agents in pharmaceuticals and cosmetics. They may be homopolymers , Carbomers are found in the market as white and fluffy powders. They have the ability to absorb, retain water and swell to many times their original volume. Carbomers codes (910, 934, 940, 941 and 934P) are an indication of molecular weight and the specific components of the polymer .
The product is a colorless and transparent new polymer materials, a variety of different viscosities (5cps ~ 2million cps), the liquid from flowing easily into a thick semi-solid material. This product has a special smoothness, softness, hydrophobicity, good chemical stability, excellent electrical insulation and resistance to high temperature. High flash point, low freezing point, long-term using between -50 �ºC ~ +200 �ºC, low viscosity-temperature coefficient, high compression ratio, low surface tension, water-repellent moisture resistance, low heat conduction coefficient. Because it has special and excellent physical and chemical function, it can be used in many different industries: 1. Cosmetic industry for skin care cream, bath gel, shampoo and other cosmetic formulations with excellent softness and silky feel. 2. Rubber, plastic, latex, polyurethane, light industry: as a model release agent, brightener agent and release agent of some rubber, plastic, latex, polyurethane products and handicraft production. 3. Machinery, automotive, instrumentation, electronics and other industries used as high-grade lubricants, liquid springs, cutting fluids, buffers oil, transformer oil, high temperature brake fluid, brake fluid, instrumentation damping oil, mold release agents and other modeling framework. 4. Textile, apparel industry as a softener, water repellent, feel modifiers, sewing thread lubrication, chemical fiber spinneret pressure lubrication and clothing lining additives. 5. Add it to other additives in leather and leather chemicals industry, it can be used as softeners, water repellent, feel agents, defoamers, brighteners. 6. Pharmaceutical, food, chemical, paint, building materials industry as defoamers, lubricants, and other weather-resistant paint. 7. Other specific purposes and other new materials.
