Size 0-550 microns (30mesh) Bulk density 0.3-0.5g/cm©ø True density 0.90-0.95g/cm©ø Compressive strength 28mpa min Moisture 0.5% max Floating rate 95% min by volume Specific density: 0.90-0.95g/cc Appearance grey/white powder Mosh scale 5-7 Ph 6 Coefficient of heat conductivity 0.054-0.095w/m.K Refractive index 1.54 Melting point 1400¡é min Loss on ignition at 1000¡é < 3% Refractoriness 1550-1750¡é 25kg/pp bag
1. Highly purity 2. Reasonable price 3. Use for Glass industry,metallurgical industry 4. 25kg/bag 5. Spec: Appearance--------------------white crystal powder Solubility------------------------easily soluble in water Purity----------------------------99.2% min. Chlorides------------------------0.7% max. Fe --------------------------------0.004% max. Water insolubles---------------0.04% max. LOI--------------------------------0.8% max. Sulphate-------------------------0.03% max. 25kg/pp bag 25T/20'FCL
Specifications: Total base content (as Na2CO3, on dry base): Min. 99.2 % Chlorides (as NaCl, on dry base): Max. 0.70% Iron (as Fe, on dry base): Max. 0.035% Insoluble in water: Max. 0.03% Loss on ignition: Max. 0.80% Fineness (180um): Min. 75.0% Appearance: White powder or fine crystals. Usage: Soda is an important chemical substance of white power or fine grains, which is easily soluble in water, it is used as a raw material in the production of building glass, soap, papers and as a cleaning agent; For bleaching, and in the treatment of water. Packing: 25kgs net bag, 20mts in the 20'FCL.
Sodium carbonate is one of the important chemical raw materials. It is widely used in light industry, daily chemicals, building materials, chemical industry, food industry, metallurgy, textile, petroleum, national defense, medicine and other fields. It is used as raw material, cleaning agent, Detergents are also used in the fields of photography and analysis. Followed by metallurgy, textiles, petroleum, national defense, medicine and other industries. The glass industry is the largest consumer of soda ash, which consumes 0.2 tons of soda ash per ton of glass. In industrial soda ash, mainly light industry, building materials, chemical industry, accounting for about 2/3, followed by metallurgy, textile, petroleum, national defense, medicine and other industries.
Phoxim is a highly effective and widely used organophosphorus insecticide that belongs to the family of carbamates. It is renowned for its exceptional pest control capabilities and its versatility in various agricultural and horticultural applications. Product Description Packaging & Delivery Packaging Detail: For liquid: 200LTR/drum, 20L/drum, 1L/bottle, 500ml/bottle, 250ml/bottle, 100ml/bottle. For solid: 25 kg/drum, 25kg/bag, 1kg/bag or on the requirement of client. Delivery Detail: 20-30days Specifications Common name: Phoxim (BSI, E-ISO, ESA); Phoxime ((f) F-ISO) IUPAC name: Chemical Abstracts name: A-[[(diethoxyphosphinothioyl)oxy]imino]benzene-acetonitrile CAS RN: 14816-18-3 EC No.: 238-887-3 PHYSICAL CHEMISTRY Mol. Wt.: 298.3 C M. F.: C12H15N2O3PS Form: Yellow liquid; (tech., reddish-brown oil). M. P.: 6.1 C B. P.: Decomposes on distillation V. P. 2.1 MPa (20 C) K OW logP = 3.38 Henry 4.18 10-1 PA m3 mol-1 (calc. ) S. G. /density 1.178 (20 C) Solubility In water 1.5 mg/l (20 C). In toluene, n-hexane, dichloromethane, isopropanol >200 g/l. Slightly soluble in aliphatic hydrocarbons, vegetable and mineral oils. Stability relatively slowly hydrolysed; DT50 (est. ) 26.7 d (pH 4), 7.2 d (pH 7), 3.1 d (pH 9) (22 C). Gradually decomposed under u. V. Irradiation. MAMMALIAN TOXICOLOGY Oral Acute oral LD50 for rats: >2000 mg/kg. Skin and eye Acute percutaneous LD50 for rats: >5000 ml/kg. Not irritating to eyes or skin (rabbits). Inhalation LC50 (4 h) for rats >4.0 mg/l air (aerosol). ADI (JMPR): 0.004 mg/kg b. W. [1999]. Toxicity class WHO (a. I. ) II; EPA (formulation) III EC hazard Xn; R22 ECOTOXICOLOGY Birds LD50 for hens 40 mg/kg. Fish: LC50 (96 h) for rainbow trout 0.53, bluegill sunfish 0.22 mg/l. Daphnia LC50 (48 h): 0.00081 mg/l (80% premixes) Bees: Toxic to bees by contact and respiratory action. APPLICATIONS It's a strong contact insecticide, stomach poison and has a clear effect for larva of Lepidoptera, insects of warehouse mosquito, flying and older cotton bollworm, and a long-effect for insects of subterranean. Application on leaf is short-effect and non-remain. Widely used for prevention and cure of insects for cotton, fruittree, vegetable, soyabean, tea, mulberry etc., such as aphid, thrips, soil, it can prevent and cure of black cutworm, click beetle, peach fruit, borer etc., and dispoes of seed of whear, corn & peanut, also for insects of soil, such as mole cricket, click beetle and so on spraying it can prevent and cure of mosquito and flying etc.
Sodium Chloride (NaCl), an ionic compound, is the major reason for salinity of sea water. Evaporation of sea water and mining of salt halite`s are the two major methods used, in the mass production of common salt. Sodium Chloride, as a chemical intermediate, is used in the production of a variety of chemicals. Industries, using this property of Sodium Chloride, are Chlor-alkali industry and Soda ash industry. Apart from the above-mentioned end user applications, it is also used in medicine, pharmaceutical, food and agriculture industries. Further, different grades of sodium chloride are produced to support its vast end users.
Ethylene glycol/MEG is also known as ethylene glycol, 1, 2-ethylenediol, or EG for short. Chemical formula is (CH2OH)2, is the simplest dihydric alcohol. Glycol is colorless, odorless, sweet liquid, low toxicity to animals, glycol can be mutually soluble with water, but in the ether class solubility is small. Used as solvent, antifreeze and synthetic polyester raw materials. The polymer of ethylene glycol, polyethylene glycol (PEG), is a phase transfer catalyst and is also used in cell fusion. Items Specification Appearance: Clear,colorless liquid Purity %min 99 Diethylene glycol %max 0.05 Color(APHA)max 10 Water content % max 0.1 Ash,wt.% max 0.005 Chlorides(as CL),ppm max 0.1 Iron,ppm,max 0.07Application 1. Used for making polyester fiber, polyester resin, dehumidifying agents, plasticizers, surfactants, synthetifibers, 2. Can be used as a dye / ink solvent, the preparation of the engine antifreeze, gas dehydration. For the production of synthetic resin, PET, or polyester fiber grade PET, bottle grade PET film used to produce mineral water bottles. 3. Can also produce alkyd resins, also used as antifreeze.
L-Glutathione Reduced 70-18-8 The thiol group of a tripeptide formed by glutamic acid, cysteine, and glycine. It is an antioxidant that can prevent damage to important cellular components by reactive oxygen species such as free radicals and peroxides. CAS NO:70-18-8 Product Name :L-Glutathione Reduced Molecular formulaï¼?C10H17N3O6S Molecular Weightï¼?307.32348 EINECS NO:200-725-4 IUPAC nominate:(2S)-2-amino-5-[[(2R)-1-(carboxymethylamino)-1-oxo-3-sulfanylpropan-2- inchi InChI=1S/C10H17N3O6S/c11-5(10(18)19)1-2-7(14)13-6(4-20)9(17)12-3-8(15)16/h5-6,20H,1-4,11H2,(H,12,17)(H,13,14)(H,15,16)(H,18,19)/t5-,6-/m0/s1 InChIkey RWSXRVCMGQZWBV-WDSKDSINSA-N Canonical Smiles C(CC(=O)N[C@@H](CS)C(=O)NCC(=O)O)[C@@H](C(=O)O)N appearance White or off white powder determination 99% minutes chloride 200 ppm sulfate 300 ppm Amonium 200 ppm iron 10ppm arsenic 2 ppm heavy metal 10ppm Cadmium (Cd) 1ppm Lead (Pb) 3 ppm Sulfated ash 0.1% Dry weight loss 0.5% Shelf lifeï Properly stored for two years.
Slurry pumps Range (discharge):1-18inch 2. Capacity: 10-5400 m3/h ¡¡3. Head: 5-125m ¡¡4. Impeller type: non-clog (open &close) 5. Shaft sealing: packing/gland packing & mechanical ¡¡6. Wet parts material: a05, a07, rubber, 3) slurry pump general features: 1. Xiyue brand xh/xhh slurry pumps are heavy duty pumps. They are cantilevered, horizontal, Centrifugal slurry pumps. Especially they are designed for most difficult pumping applications. 2. Xiyue xhh models are designed for heavy duty applications require high head per stage at high pressures. It is suitable for long distance transporting or where others require more than one pump in series. ¡¡3. Xiyue xh models display total interchangeability between hard metal and ¡¡¡¡elastomeric liner pumps. 4. They are mainly used in: power plant, chemical process, coal, heavy minerals, paper and pulp, mill discharge, lime grinding, bottom boiler fly, ash cyclone feed, slag granulation, suction hopper dredging, barge loading, sand reclamation ect. ¡¡¡¡¡¡ 4) slurry pump structure features: 1. Xiyue xh/xhh pumps are single stage, single suction, and overhang shaft, centrifugal, ¡¡¡¡double-casing horizontal type. Wet parts are made of abrasive resistant hard metal or rubber. ¡¡2. Bearing assembly use cylindrical structure, adjusting the space between impeller and ¡¡¡¡front liner easily, being removed completely when being repaired. ¡¡3. Bearing assembly uses grease lubrication. ¡¡4. The shaft seal could use the packing seal, expeller seal and mechanical seal. ¡¡5. The discharge branch can be positioned at intervals of 45 degrees by request and oriented ¡¡¡¡to any eight positions to suit installations and applications. ¡¡¡¡ Material construction Pump body: cast iron/grey iron Wooden box
Soda ash, sodium bicarbonate.
Aluminum sulphate, calcium chloride dihydrate/anhydrate, sodium, carbon black, zinc oxide, acid, soda.
Water treatment chemicals, swimming pool chemicals, TCCA, SDIC, CYA, calcium hypochlorite, Sodium percarbonate, aluminum sulphate, HEDP, ATMP, soda ash.
Tobee M Medium Slurry Pumps are designed for continuous pumping of medium duty abrasive/dense slurries in processes from minerals processing, cyclone feed to regrind, flotation and tailings. 10x8E-M Medium Duty Slurry Pump is cantilevered, horizontal and centrifugal with double casing structure, It mainly suitable for pumping medium concentration slurries, 10x8E-M slurry pump applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc.
It used to weld pipe moving at a high speed tracking and scale cutting equipment, using liquid crystal touch screen man-machine interface, the specified length, track parameters such as speed, accuracy and manual adjustment, has reliable mechanical transmission, good length and synchronicity, maintain a long-term high speed and high precision, low failure rate. In addition our company can provide CNC cold flying saw cutting according to user needs, low noise, high precision, cutting burr, flat and relevant process can be avoided.
Chemical materials such as carbon black, titanium dioxide, iron oxide, zinc oxide, sodium acetate, soda ash light, calcium oxide.
Fiberglass Window Screen Fiberglass window screen woven from PVC coated fiberglass filament yarn. Fiberglass window screen makes ideal material in industrial and agricultural buildings to keep away fly, mosquito and small insects or for the purpose of ventilation. Fiberglass window screen offers excellent properties of fire resistance, corrosion resistance, heat resistance, easy cleaning, good ventilation, high strength, stable structure and non-smell etc. 1. Product Description: Material: Fiberglass and PVC coated fiberglass Wire diameter: 0.18mm-0.40mm Mesh size:18x16mesh, 18x14mesh, 16x16mesh, 18x18mesh, 20x18mesh, 6x14mesh, 14x14mesh Color:White,black,gray and offwhite or as per requirements. Weight:100g/m2, 110g/m2,120g/m2, etc . Or produce it according your need . Weave tech:Plain weave , twisted weave, high temperature-fixing.
LABSA, SLES, STPP, caustic soda, soda ash, titanium dioxide anatase/rutile, chrome oxide green, iron oxide, lithopone.
Organic chemical, cmc-carboxymethyl cellulose, glacial acetic acid, oxalic acid, pentaerythritol, formic acid, inorganic chemicals, zinc oxide, caustic soda, soda ash, SHMP, STPP, trichloroisocyanuric acid , sodium bicarbonate, aluminum sulphate, pigment iron oxide red /yellow/black/blue/brown, lithopone, chrome oxide green, poly aluminum chloride, carbon black.
Zinc oxide, carbon black, lithopone, caustic soda , titanium oxide, oxalic acid, formic acid , iron oxide red, sodium carbonate, calcium chloride.
Designed to be interchangeable with a warman ah 4/3 slurry pump. Fh series slurry pumps are mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. Structure: The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pump of this type may be installed in multistage series to meet the delivery for long distance. Application: This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. We supply complete, ready-to-use packages including pump, motor and frame desinged to your specifications. These pumps are ideal for the chemical transfer pump in plants for chemicals including lime. Standard export wooden cargo
