Product Name: HDPE Winding Reinforced Pipe Product Introduce: High density polyethylene structure wall hot coil pipe is a kind of inner surface is smooth, outer wall spiral shape and strengthening, By spiral winding technology made of Special shaped structure wall pipes. Product Application: It is widely used in urban drainage, municipal drainage, electric power and petrochemical and other fields. Product specificaion size: Inside diameter: 300-3000mm
Product name: HDPE silicone core pipe PRODUCT INTRODUCE: HDPE silicon core pipe is a kind of novel composite pipe wall with silica gel mass solid lubricant. By three plastic extruding machine synchronous extrusion compound, main raw materials for high density polyethylene, core layer to the lowest friction coefficient solid lubricant silica gel quality.The widely used optical cable communication network system. PRODUCT CHARACTERISTICS: The lining of the silicon core layer is solid, permanent lubricant; The lining of the silicon core layer is pressed by synchronization in high density polyethylene pipe wall, and evenly distributed throughout the pipe wall, not peeling off. The lining of the silicon core layer and high density polyethylene with the same physical and mechanical properties; Internal friction characteristics of silicon core layer remains the same, cable in the pipe can be extracted repeatedly, blowing method, one can blow cable > 1000 m or above; The lining of the silicon core layer does not react with water, wash water pipe after an accident. PRODUCT SIZE: Cable diameter: 11-36mm Silicon pipe diameter: 24-55mm
Product Name: PVC grid pipe Product Introduce: Grid pipe Can be called a grid type plastic pipe, Grid type communication pipe, A new type of pipe products use for communication engineering. Grid pipe is polyvinyl chloride as the main raw material, match with flexibilizer, anti-aging agent and other auxiliaries, Sheath and Sub-pipe as a whole, One times extrusion molding. Product application: Use for telecom, cable TV and cable, cable with underground communication pipe. Product model and specification size: Six holes Grid pipe Five holes Grid pipe Four holes Grid pipe Nine holes Grid pipe Single holes Grid pipe
Product name: PB pipe and fittings Product Features: Light weight, easy transportation and installation. Chemical stability and durability: service life of up to 100 years . UV-ray and corrosion resistance, assuring high quality of purified water. High flow capacity with smooth surface. No leakage assurance with butt welding. Energy saving: 30% less than that of steel pipe. Easy maintenance and renovation: does not bond with concrete. Product Application: 1.Water supply pipe (health) and hot water pipe. 2.Heating pipe. 3.Air conditioning use industrial pipe. 4. Agriculture and gardening pipe, 5. Snow removal pipe. 6. Hot spring pipe. 7. Fire sprinkler system with pipe. Specification size: Outer diameter: 16-32mm. Wall thickness: 2.0-4.4mm. Nominal pressure: 1.6Mpa, 2.0Mpa, 2.5Mpa.
Product Name: MPP Single wall corrugated pipe Product introduction: MPP single wall corrugated pipe is a polypropylene as the main raw materials, Using the reinforced composite special formula, And processing technology made of new type of structure plastic pipe. Product Application: MPP single wall corrugated pipe is suitable for the power control cables, Communication cable, cable buried protection. Product Features: 1, Quality is reliable, saving cost, light weight, high ring stiffness, construction is convenient. 2, Embedded rubber sealing ring bayonet connection, Loss prevention and sealing performance is good. 3, Heat resistance, abrasion resistance, electrical insulation, at the same time at high temperature can still maintain good ability to resist external pressure. 4, Wear line performance is good. 5, Resistance to pull and withstand voltage. Product specification size: Inner diameter: 100mm. Inner diameter: 150mm. Inner diameter: 175mm. Inner diameter: 200mm.
Product name: pert pipe and fittings. Product Introduce: Polyethylene of raised temperature resistance pipes for floor radiant heating is use ethylene and octene copolymer to produce, Have With super moisture resistant, durable resistance to static strength and good impact strength. Product Application: 1, Radiant floor heating system 2, Construction of hot and cold water supply, Piping drinking water system. 3, Food industry in the beverage, wine, milk and other liquid pipelines. Specification size: Outer diameter: 16-32mm Wall thickness: 2.0-4.4mm Nominal pressure: 1.25Mpa, 1.6Mpa, 2.0Mpa.
Product name: PE composite pipe Product Introduce: Steel mesh skeleton plastic composite pipe is use wrapped around the pipe of high strength steel wire for strengthen the skeleton, outer layer with high strength polyethylene as substrate, And through the hot melt adhesive compound after continuous extrusion forming of new environmental protection pipe. Product application: Suitable for municipal Gas pipeline, Water supply, Underground drainage, sewage, etc. Building water supply and drainage. Fire and gas transport. Can be used in chemical, petroleum, electric power, medicine, metallurgy, mining and other industrial and agricultural irrigation. Product specification size and standard: Nominal diameter: DN50-DN630mm Wall Thickness: 4.5-23mm Nominal pressure: 0.8Mpa, 1.0Mpa, 1.6Mpa, 2.0Mpa.
Product name: PVC square pipe Product Features: 1, Corrosion resistant. 2, Compressive strength, acid resistance, alkali resistance. 3, Low friction coefficient, high value of utilization. PVC square application: 1, Used for water system. 2, Building materials. 3, Indoor cultivation of flowers and plants. 4, Other industrial pipe. Specification size: Long and wide custom. Thickness: 1.6-5.0mm.
Product: PE Double-wall corrugated pipe. Product Introduce: Polyethylene (PE) double-wall corrugated pipe with polyethylene as the main raw material, respectively, by inside and outside extruder extrusion, inner surface level off is smooth, the outer wall terraces corrugated, have double wall between the internal and external wall tubular layer of plastic tubing. Using range: 1, Sewage drain: Municipal engineering drainage, factories, enterprises, chemical, pharmaceutical industries. 2, All kinds of construction engineering, drainage engineering: Stadiums,Railway,High speed etc. 3, Low pressure water conveyance project: Farmland, Orchards, forestry of irrigation and drainage. 4, Ventilation and communication engineering: Mine ventilation, Mine wall permeability tube, Railway and highway cable cable, Telecommunications, protect the casing. Pipe specification index: Inner diameter: 110-800mm. Nominal pressure: SN 4( 4KN min), SN 8( 8KN min). Product performance: Nominal pressure: SN 4( 4KN min), SN 8( 8KN min). Impact on performance( TIR)/%: 10 max. Creep ratio: 4 max. Oven test: No bubbles, no separation, no cracking.
Product: HDPE water supply pipe. Material: PE pipe( PE80). HDPE Pipe for water supply (PE 80). PE water supply pipe application: 1, PE pipe is suitable for the tap water supply pipeline, Village green water, Fire water, irrigation. 2, Ground source heat pump pipe: the central air conditioning. 3, Siphon drainage system: such as large construction projects, outdoor storm sewer. 4, Sea and sand suction sand, garbage buried ooze water pipe. PE pipe size model: SDR33(PN4), SDR21(PN6), SDR17(PN8), SDR13.6(PN10), SDR11(PN12.5). Nominal diameter: DN 25mm-800mm. Nominal pressure: 0.4Mpa-1.25MPa. Wall thickness: 2.3-59.3mm.
Product: HDPE water supply pipe Material: PE pipe( PE100) PE water supply pipe application: 1, PE pipe is suitable for the tap water supply pipeline, Village green water, Fire water, irrigation. 2, Ground source heat pump pipe: the central air conditioning. 3, Siphon drainage system: such as large construction projects, outdoor storm sewer. 4, Sea and sand suction sand, garbage buried ooze water pipe. PE pipe size model: Nominal pressure: 0.6Mpa-1.6Mpa. Nominal diameter: DN 20mm-1000mm. Wall thickness: 2.3-59.3mm.
Size: 1/2"NB TO 48" TO IN Schedule: SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS TYPE: SEAMLESS /ERW / welded / Fabricated MATERIALS: Stainless Steel : ASTMA403 W2P GR.304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L Carbon Stell: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH60, WPHY 65, WPHY 70. Low Temparature Carbon Steel : ASTM A 234 WPL3 / A420WPL6 Alloy Steel : ASTM/ ASME A/SA 234 GR.WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 Duplex ASTM A 815, UNSNO 31803, S 32205. Nickel Alloy VALUE ADDED SERVICE: Hot Dip Galvanizing Epoxy Coating
We are a manufactuer of Pipe, Elbow, Bend, Reducer, Tee, Flange on Carbon Steel/Stainless Steel/Alloy Steel. High pressure pipe fittings are our advantage products. They earn a good reputation for supplying large-diameter fittings at home and abroad. The products are manufactured with high quality and competitive price. Hope to cooperate with you! Thanks & Best regards Certificate:CE ISO API
1 Products Pipe/Elbow/Tee/Flange/Reducer/Cap/Saddle 2 Type BW/SW/Welded/Seamless High & Low pressure/Large Diameter/Normal size 3 Material Carbon steel/Stainless steel/Alloy steel/Clad steel 3 Standards Gost/ASTM/JIS/DIN etc 4 Qualification ASME/CE/ISO
We shijiazhuang bangdong pipe company (sunny@bdpipefitting.Com )believes in long term relationship with our clients worldwide, required quality in reasonable price of ansi/asme b16.9 pipe cap are always our main priority. We are known as specialist in ansi/asme b16.9 pipe cap , 70% of our customers are associated with us for their regular requirements of asni/asme b16.9 pipe cap, we have the specialization & experience to manufacture asni/asme b16.9 pipe cap . Standards: asni-b16.9 , astm a403 - asme sa403 - 'standard specification for wrought austenitic stainless steel pipe fitting api 590-605, asme b16-25 - 'buttwelding ends' , schedule : sch 5 to sch xxs sizes : 1/2" to 24" materials : monel , nickel , inconel , hastalloy, titanium, stainless steel , alloy steel , carbon steel stainless steel asme /astm sa/a403 sa/a 774 wp-s, wp-w, wp-wx , 304, 304l, 316, 316l , 317, 317l 904, 904l , type : butt weld ( bw ) thickness : sch 5s, 10s, 20s, s10, s20, s30, std , 40s, s40, s60, xs, 80s, s80, s100, 100s, s120, s140, s160, xxs and etc.
We are a manufactuer of Pipe, Elbow, Bend, Reducer, Tee, Flange on Carbon Steel/Stainless Steel/Alloy Steel. High pressure pipe fittings are our advantage products. They earn a good reputation for supplying large-diameter fittings at home and abroad. The products are manufactured with high quality and competitive price. Hope to cooperate with you! Any inquiries we can help,kindly send it to my email:sunny@bdpipefitting.com Thanks.
Type Line pipe ( smls, erw, lsaw, forged) / tubing, casing&pup joint (smls ) ·specification Astm a53 / a106 / a333 / a335 / a312 Api 5l psl1/psl2 Api 5ct psl1/psl2/psl3 ·dimension Welded:16? – 80?(dn 400 – dn 2000) Seamless:1/2? – 24?(dn 15 – dn 600) ·wall thickness Sch5s–xxs ·material 1) carbon & alloy steel: Astm a53 gr.B Astm a106 gr.B / gr.C Astm a333 gr.3 / gr.6 Astm a335 p5 / p11 / p12 / p22 / p9 / p91 Api 5l Psl 1 b, x42, x46, x52, x56, x60, x65, x70, x80, x100 Psl 2 b, x42, x46, x52, x56, x60, x65, x70, x80, x100 2) stainless steel: Astm a312 tp304 / tp304l / tp316 / tp316l / tp321 / tp321h / tp347 / tp347h Uns32304 / uns31803 / uns32205 / uns32750 / uns31260 / uns32550 / uns32760 / uns32707 3) special alloy steel: Hastelloy b-2, hastelloy c, hastelloy c-276, hastelloy c-4, incoloy a-286, incoloy 800ht, incoloy 825, Inconel 600, inconel 625, inconel x-750, inconel 718, nimonic 80a, nimonic 90, nimonic 93 Remark: products can be manufactured as per client's technical requirement of type, standard, dimension, wall thickness and material.
Flanges type:weld neck flanges(wn flange), slip on flanges(so flange), blind flanges(bl flange), figure 8 flanges and etc. Material:carbon steel:a105 Alloy steel:a182 f12/a182 p11/a182 f22/a182 f5 Standard:asme b16.5
Butt welded fittings Detail: Seamless or welded fittings Specifications and steel grade: Carbon steel: astm a234 wpb, wpc; astm a420 wpl9, wpl3, wpl6, wphy-42, wphy-46, wphy-52, wphy-60, wphy-65, wphy-70, Alloy steel: astm a234 wp1, wp11, wp12, wp22, wp5, wp9, wp91 Stainless steel: astm a403 wp304/304l, wp316/316l, wp321, wp347 Size range: Carbon steel: from ½" up to 96" Stainless steel (seamless): from ½ up to 24" Stainless steel (welded): from 26" up to 72" Schedule: Carbon & alloy steel: sch std, xs, xxs, sch 10 ~ sch 160 and special thickness Stainless steel: sch 5s, 10s, 40s, 80s and special thickness
Forged fittings Detail: Socket weld & threaded (npt) Types: Elbow Tee Coupling Weldolet / sockolet / threadolet Caps Union Bushing Cross Plug Swage nipple Hexagon nipple etc... Specifications and steel grade Carbon steel: astm a105/ a105n/ a694 f42/46/52/56/60/65/70 / a350 lf3/ a350 lf2, etc. Stainless steel: astm a182 f304/ 304l/ 304h/ 316/ 316l/ 317/ 317l/ 321/ 310/ 347/ 904l/ etc. Alloy steel: astm a182 f1/ f5/ f9/ f11/ f22/ f91/ etc.
