Product Name: PVC-U Irrigation pipe Product Introduce: PVC-U Irrigation pipe Based on health grade PVC resin as the main raw material, Add quantitative stabilizer/ Lubricants/Filling agent/Toner, By plastic extruder extrusion molding and plastic injection molding machine injection molding, Through cooling and solidifying, finalize the design, testing, packaging process to produce a kind of pipe. Product Features: Fluid resistance is small. High transmission efficiency. Quality is light, easy installation and maintenance, reliable in performance. High temperature resistance, good sealing performance, long service life. Product Application: Irrigation pipe used in urban and rural areas indoor and outdoor water supply, Farmland irrigation, Salt industry halide pipeline, Aquaculture water, Mine ventilation, Water supply and drainage, Landscape irrigation and others engineering. Product Specification Size: Nominal pressure: 0.2 MPa, 0.2 5MPa, 0.32 MPa, 0.4 MPa. Nominal diameter : 75 mm, 90 mm, 110 mm, 125 mm, 140 mm, 160 mm, 180 mm, 200 mm , 250 mm, 280 mm, 315 mm.
Carbon Steel Flange ASTM A105, ASTM A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2 ASTM A694 F42, F46, F48, F50, F52, F56, F60, F65, F70 Stainless Steel Flange ASTM A182 F304/304L, F316/316L, F316H, F310, F321, F44 (UNS S31254) Alloy Steel Flange ASTM A182 F1, F5a, F9, F11, F12, F22, F91 Chemical Requirements (Composition, %, max) Material Symbol C Mn P S Si Ni Cr Mo Cu N V Co ASTM A105 0.35 0.60-1.05 0.035 0.040 0.10-0.35 0.40 0.30 0.12 0.40 _ 0.08 _ ASTM A350 LF2 0.30 0.60-1.35 0.035 0.040 0.15-0.30 0.40 0.30 0.12 0.40 _ 0.08 0.02 ASTM A182 F304 0.08 2.00 0.045 0.030 1.00 8.0-11.0 18.0-20.0 _ _ _ _ _ ASTM A182 F304L 0.03 2.00 0.045 0.030 1.00 8.0-13.0 18.0-20.0 _ _ _ _ _ ASTM A182 F316 0.08 2.00 0.045 0.030 1.00 10.0-14.0 16.0-18.0 2.00-3.00 _ _ _ _ ASTM A182 F316L 0.03 2.00 0.045 0.030 1.00 10.0-15.0 16.0-18.0 2.00-3.00 _ _ _ _ ASTM A182 F321 0.08 2.00 0.045 0.030 1.00 9.0-12.0 17.0-19.0 _ _ _ _ _ EN 10025 S235JR 0.20 1.40 0.045 0.045 _ _ _ _ _ 0.009 _ _ 20Mn 0.17-0.23 0.70-1.00 0.035 0.035 0.17-0.37 0.30 0.25 0.25 20 0.17-0.23 0.60-1.00 0.030 0.020 0.17-0.37 0.25 0.25 0.25 16Mn 0.13-0.19 1.20-1.60 0.030 0.020 0.20-0.60 0.30 0.30 0.25 Mechanical Requirements Material Symbol Tensile Strength, min, MPa Yield point, min, Mpa Elongation, min, % Reduction of area, min, % Hardness, max, HB Min. Impact Average, J Test Temperature, C ASTM A105 485 250 22 30 187 ASTM A350 LF2 485-655 250 22 30 20 -46 ASTM A182 F304 515 205 30 50 ASTM A182 F304L 485 170 30 50 ASTM A182 F316 515 205 30 50 ASTM A182 F316L 485 170 30 50 ASTM A182 F321 515 205 30 50 20Mn 450 275 24 50 197 20 410 245 25 55 156
1.Size:1/2"-48"(seamless), 40"-80"(welded) 2.Wall thickness:sch5s, 10s, 40s, 80s(stainless steel);sch5sch160, xs, xxs, std (welded and seamless) 3.Type: euqal , reducing, lateral tee 4.Standard:asme sa-234, sa-420, sa-403;asme b16.9 Jis b2311, b2312, b2313 Din2605, 2615, 2616, 2617 Iso3419, iso5251 Pipe fittings can also be specially manufactured according to customers' drawings. 5.Material: astm a234 wpb, wpc, wp1, wp12, wp11, wp22, wp5, wp9, wpr, wp91 Astm a335 p1, p2, p5, p9, p11, p12, p15, p21, p22, p23, p91, p92, p122 Astm a403 wp304, wp304l, wp316, wp316l Astm a420 wpl6, wpl 9, wpl3, wpl8 Astm a860 wphy42, wphy46, wphy52, wphy60, wphy65, wphy70 6.Surface treatment:abrasive blasting, hot&cold galvanized , rust-proof oil or black painting. 7.Packing:fumigation-free wooden cases/ pallets or according to customers' requirment Port of loading: xin gang , tianjin , china. 8.Others:(1).Special design available according to requirement. (2).Anti-corrosion and high-temperature resistant. (3).The whole production process is under the iso9001:2001 strictly 9.Payment terms: 30% in advance by tt or l/c at sight 10.Delivery time: 10-40 days or according to customers' requirement
1.Butt fusion pipe fittings, 2.plastic pipe fitting,HDPE/MDPE 3.PE coupler,tee,elbow,reducer,cap end,stub end,etc. 4.GB/EN/ANSI/ASTM/ISO/ASNZS/DIN Standards 5.dimension:DN20mm - DN630mm,1/4'' - 24'' 6.SDR11/SDR13.6/SDR17/SDR21/SDR26 HDPE Fittings
1, Sewage drain: Municipal engineering drainage, factories, enterprises, chemical, pharmaceutical industries 2, All kinds of construction engineering, drainage engineering: Stadiums,Railway,High speed etc. 3, Low pressure water conveyance project: Farmland, Orchards, forestry of irrigation and drainage. 4, Ventilation and communication engineering: Mine ventilation, Mine wall permeability tube, Railway and highway cable cable, Telecommunications, protect the casing.
1:made of special synthetic rubber with excellent oil resistance, heat resistance and aging resistance. 2:light weight, non-toxic and odorless. 3:excellent flexibility and fatigue resistance
1. Compressure compensation function,stable flow rate. 2.Superior durability with raw material of chemical-proof and anti-ultraviolet rays 3. Cutting down production costs 4. Decreasing damage by from insects 5. Increasing productivity
Almost all pex used for pipe and tubing is made from high-density polyethylene (hdpe). Pex contains cross-linked bonds in the polymer structure, changing the thermoplastic to a thermoset. Cross-linking is accomplished during or after the extrusion of the tubing.
1:Chemically inert, resistant to almost all chemicals 2:Good weather resistance, corrosion resistance, and geing resistance 3:Low surface friction coefficient, high bond resistance 4:Good electrical characteristics, esp. superior electrical insulation performance 5:Wall Thickness: 0.5-50mm 6:Colors: Transparent/Black/White
pvc layflat hose pvc garden hose pvc suction hose
Material:a234-wpb.A420-wpl6.A234-wp12.A234-wp11.A234-wp5.A403- wp304.A403-wp304l.A403- wp316.A403-wp316l etc. Bending radius (r): r=2d 3d 4d 5d 6d 7d 8d 9d 10d Bending angle:15o 30o 45o 60o 90o 135o 180o, also could manufacture according to the angles given by the clients. Straight length(l): the length between two ends general from 300mm-1500mm, and also can produce according to the clients' requirements. Outer diameter (d): up to d1620mm Thickness(t): up to t120mm End bevel: according to the bevel of welding pipe fittings construction. We supply good quality bend (3d, 5d, 10d). Check more detail information about bend (3d, 5d, 10d) -
Packaging & Delivery Packaging Details: standard exporting packing Delivery Detail: Commonly 20days after confirmation. Specifications Standard: ANSI B16.9/16.28,DIN 2605/2615,JIS Size:1/2"- 48" Certificate: ABS/BV/ISO/API Type: carbon steel pipe fitting Type carbon steel pipe fitting, butt weld pipe fitting ,steel pipe fitting Size 1/2"- 48" Wall thickness Sch 20- Sch 160 standard BS, JIS ,GB, ASME ,ANSI ,DIN Material Carbon steel : ASTM A106 GRB/ A53 GRB/ API 5L GRB/A335/ST37/ST52 Connection Butt-welding Applications Oil, gas, chemical industry, water conservancy, electric power, boiler, machinery, metallurgy, sanitary construction etc. Quality ISO9001 : ISO2000-Quality-Systerm has been passed . ABS ,BV. Type carbon steel pipe fitting, butt weld pipe fitting, steel pipe fitting Surface anti rust black painted, anti rust oil, galvanizing Packaging Plywood cases ,wooden pallet plastic bag or as per customers requirement Delivery time According to customers requirement Productivity 50000 T/Y Others Pipe fitting ,flanges, seamless pipe
The Slip-on flange has a low hub because the pipe slips into the flange prior to welding. Slip-On Flanges, SO Flange It is welded both inside and out to provide suffcient strength and prevent leakage.Slip-on flanges are all bored slightly larger than the O.D. of the pipe. They are preferred over welding neck flanges bu many users due to their lower intial cost, but final intallation cost is probably not much less than that of the welding neck flange because of the additional welding involved. Advantages of slip on flanges: Low cost installation Less time needed to spent on ensuring the accuracy of the cut pipe They are somewhat easier to align The slip-on flanges have low hub because the pipe slips into the flange before welding The flange is welded both inside and outside to provide sufficient strength They prevent leakage Standards, Dimensions & Weight ASME/ANSI B16.5 Class 150 SO ASME/ANSI B16.5 Class 300 SO ASME/ANSI B16.5 Class 600 SO ASME/ANSI B16.5 Class 900 SO BS 3293 Class 150 SO BS 3293 Class 300 SO BS 3293 Class 600 SO DIN 86029 PN 10 Specifications of Slip-on flange: Size: 1/2 to 60, DN 12mm to DN 1500mm . Pressure class: Class 150 to Class 2,500, PN 2.5 to PN 250 Facing: RF / RTJ Material of Slip-on flange: Cabon steel: A105, A350 LF2 Stainless steel: A182 F304/F304L/F316/F316L/F321 Alloy steel: F11, F12 Packing: plywood case and plywood pallet
Seamless or Welded Fittings Types: ELBOW, TEES, REDUCERS, CAPS, SPLIT TEE, Y TEE, BARRED TEE, STUB ENDS. ETC. Specifications and Steel Grade: CARBON STEEL: ASTM A234 WPB, WPC; ASTM A420 WPL9, WPL3, WPL6, WPHY-42, WPHY-46, WPHY-52, WPHY-60, WPHY-65, WPHY-70, ALLOY STEEL: ASTM A234 WP1, WP11, WP12, WP22, WP5, WP9, WP91 STAINLESS STEEL: ASTM A403 WP304/304L, WP316/316L, WP321, WP347 Size Range: Carbon Steel: From ½" up to 96" Stainless Steel (Seamless): From ½ up to 24" Stainless Steel (Welded): From 26" up to 72" Schedule: Carbon & Alloy Steel: SCH STD, XS, XXS, SCH 10 ~ SCH 160 and special thickness Stainless Steel: SCH 5S, 10S, 40S, 80S and special thickness Size Range(thickness): Seamless Series: OD: 10.3 - 830 mm; Thickness: 1.7 - 70 mm Welded Series: OD: 10 - 2600 mm; Thickness: 3 - 30 mm Remark: Products can be manufactured as per client's technical requirement of type, standard, dimension, wall thickness and material.
This is Shijiazhuang Bangdong Pipe Co.Ltd from China. A professional manufacturer of Carbon Steel Seamless Butt Weld Pipe Fittings as ASTM, ANSI,DIN and JIS standard. Inculding the following Items: 1. Elbow 45degree & 90degree Long Radius &Short Radius 2. Straight Tees & Reducing Tees 3. Concentric Reducers & Eccentric Reducers 4. End Caps from 1/2 inch to 72nch 5. Bend 2D 3D, 4D, 5D etc. 6. Flanges, welding neck, slip on, socket weld, threaded, lap joint, blind, spectacle, orifice, ring and long welding neck flanges. Size: 1/2 inch-72 inch Wall Thickness: SCH-5S to SCH-XXS Material: Carbon Steel-- ASTM A234 WPB, WPC; ASTM A420 WPL9, WPL3, WPL6, WPHY-42, WPHY-46, WPHY-52, WPHY-60, WPHY-65, WPHY-70, Alloy Steel-- ASTM A234 WP1, WP11, WP12, WP22, WP5, WP9, WP91 Stainless Steel-- ASTM A403 WP304/304L, WP316/316L, WP321, WP347 Standard: ASME, ANSI, JIS, DIN USE: Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc. Please contact us, if you have enquiry of pipe fittings. Miss Sunny
Product: PVC-U water supply pipe Product Introduce: PVC-U water supply pipe Based on health grade PVC resin as the main raw material, add non-toxic additives, processed by extrusion or injection molding. Product features: Strong corrosion resistance, acid resistance, alkali resistance. High mechanical strength. Small resistance. Health good performance. Product application: 1, Civil construction, Industrial building indoor water supply system. 2, Urban water supply pipeline system. 3, Marine aquaculture. 4, Residential area, plant area of buried water supply system. 5, Water treatment plant water piping system. 6, The botanical garden, irrigation, drilling engineering and other industrial pipe. Product specification size: Nominal pressure: 0.63Mpa, 0.8Mpa, 1.0Mpa, 1.25Mpa, 1.6MPa, 2.0Mpa. Nominal diameter DN: 20-630 - mm. Wall thickness: 2.0-35.8mm
Product Name: PVC-U drain pipe Product Introduce: PVC - U drain pipe is PVC resin as the main raw material, adding suitable amount of additives, the process such as mixing, extrusion and injection molding. Product Application: Building drainage, Life drain, Discharge of sewage, Municipal engineering and industrial and mining, enterprise many kinds of wastewater discharge system. Product Features: Good physical and chemical properties,Corrosion resistance, high impact strength, fluid resistance is small. Qualitative light and durable, convenient installation, strong to speed up the construction speed. Product specification size: Nominal diameter: 32-630 mm PVC-U drain pipe Classification: 1, Building drainage with PVC-U Rain pipes. 2, Building drainage with PVC-U Inside spin Silencing pipes
Product Name: PP-R pipe Product Introduce: Using atactic copolymerization polypropylene as raw material, by extrusion or injection molding. Product application: 1, Building hot and cold water supply system. 2, Floor heating and central air conditioning system. 3, Drinking purified water system. 4, Beverage production delivery system. 5, Coal gas and natural gas transportation system. 6, Compressed air pipe. 7, Industrial water and chemical learning medium transport emissions. Product specification size: Nominal pressure: 1.0Mpa, 1.25Mpa, 1.6Mpa, 2.0Mpa, 2.5Mpa. Nominal diameter: 20-100mm. Wall thickness: 2.0-18.3mm
Product Name: MPP Electric power pipe Product Features: 1, Excellent electrical insulation properties. 2, Has high heat distortion temperature and low temperature impact performance. 3, Tensile, compressive performance is higher than HDPE. 4, Qualitative light, smooth, small friction resistance, can be heat welded butt joint. Product Application: 1, The urban and rural trenchless horizontal directional drilling cable pipe engineering, And open excavation cable pipe engineering. 2, Urban and rural trenchless horizontal directional drilling sewage drainage pipe engineering. 3, Industrial wastewater engineering. Product specification size: Nominal diameter: 110-250 mm Note: Trenchless high-voltage power cable protection USE Modified polypropylene MPPpipe. Divided into normal and enhanced.
Product Name: SBB FRP pipe Product Introduce: FRP cable protection pipe, glass fiber as reinforcing material, and unsaturated resin bond forming. Product Features: 1, Strong resistance to pressure, light weight, smooth inner wall, small friction coefficient, wear in the cable easily, does not damage the cable. 2, Strong corrosion resistance, Insulation, Non-magnetic, Acid and alkali resistant, Flame retardant, Antistatic. 3, Bending modulus of elasticity. 4, Good water resistance. Specification size: Nominal diameter: 50-200mm. Wall thickness: 3.0-5.0mm, 5.0-10mm.
