Structural features 1, double-suction; double-sustain 2, motor and fan by type coupling 3, liquid dynamic pressure oil-film bearing support 4, the hydrodynamic oil-film bearing scraping for free 5, cone arc collector 6, backward curved impeller 7, serrated disc 8, installation of the wearing plate 9, streamlined flow regulating blade 10, conical hub 11, replaceable liner 12, floating carbon ring seals 13, electric barring device Plywood case
Structural features 1, arc collector 2, cone curved front disc 3, arc-shaped blades 4, streamlined shaft drive 5, stiffening ring 6, fm ring Advantages 1, high efficiency, low shaft power 2, the smooth operation 3, high bearing capacity 4, flat performance curve 5, low noise, small vibration 6, long working life Plywood case
Structural features: 1, single-suction; single-support 2, motor and fan by type coupling 3, rolling bearings 4, arc collector 5, cone curved front disc 6, airfoil blades 7, streamlined shaft drive Advantages: 1, high efficiency, low shaft power 2, smooth operation and high bearing capacity 3, low noise, small vibration 4, long working life Plywood
Structural features: 1, single-suction single support 2, thrust reverser blades 3, arc collector 4, cone curved front disc 5, arc superimposed leaves 6, serrated disc 7, unique explosion-prevention design Advantages 1, high efficiency 2, low shaft power 3, smooth operation 4, high bearing capacity 5, low noise 6, small vibration 7, long working life Plywood case
Structural features 1, arc collector 2, cone curved front disc 3, arc-shaped blades 4, streamlined shaft drive 5, stiffening ring 6, fm ring 7, thrust reverser blades Advantages We will play our own strengths, tailor-made, carved, to create a first-class and energy -efficient blowers. Plywood case
FP40-400.12 Fan Pump Exchange Unit / FP40-400.12 Rotor Unit is 100% interchangeable with original Andritz FP40-400.12 Fan Pump, Th FP40-400.12 Exchange Unit made from duplex stainless steel 1.4460. FP Series Fan Pump is a low pulse and high efficient paper pulp pump, It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed for flow rates up to 20,000 mh and heads up to 220 m. The pumps can convey stock suspensions with consistencies of up to 2%. The fan pump supplied has a very high efficiency of 92% and lowest pulsation in order to guarantee perfect sheet formation. High efficiency and low pulsation Water With efficiencies of over 90%, FP40-400.12 Double Suction Split Case Pumps permanently help to save valuable energy.
Front Lining also called front insert, it s one of the important parts for the ACP80-250 Centrifugal Single-stage Pumps. Andritz parts and spares for the Andritz ACP series, are some of the most popular ranges of equivalent parts and spares. These pumps parts are particular popular with our customers in the paper industry.
I) main tee: 38x 35 x 3.0m, or3.60m Ii) cross tee: 32 x 35 x 1.2m Iii) cross tee: 32 x 35 x 0.6m Iv) wall angle: 20 x 15 x 3.00m or 3.60m V) thickness: 0.30mm and 0.40mm 0.45mmlanguage option Tee bar grid system (t38 type)is the economical framing suspension grid system used with metal and gypsum lay in tiles. The t-38 ceiling t-grid cost less and more steay than common t-grid. And it can be suspended inside or exposed outside.
Mineral fiber ceiling Features: 1) material: mineral fiber sound insulation board 2) surface: a variety of surface patterns available 3) coating: pvda 4) color: white 5) density: 350-420kg/m 6) fiber content: í²90% 7) fire performance: meet cns6532 class 1 8) product content: mineral fiber 9) thermal conductivity: ín0.065w/mk 10) bending strength: >250n 11) noise reduction coefficient: nrc 0.4 - 0.6 depending on the pattern and the thickness 12) water content: ín3% 13) light reflectivity: í²85% 14) mold resistance 15) no asbestos 16) no formaldehyde 17) dimensions: 600*600mm, 600* 1200mm Thickness: 10mm, 12mm, 14mm, 15mm, 18mm Mini order: 1*40'ft Price terms: fob or cif Payment terms: t/t or l/c at sight Paper cartion container
Mineral fiber ceiling board Features: 1) material: mineral fiber acoustic ceiling board 2) surface: a variety of surface patterns available 3) coating: pvda 4) color: white 5) density: 350-420kg/m 6) fiber content: >=90% 7) fire performance: meet jc/t670-2005 8) fracture load by bending (n):>250n 9) damping index: 3.0 10) noise reduction coefficient: nrc 0.35 - 0.6 depending on the pattern And the thickness 11) light reflectivity: >=85% 12) no asbestos 13) no formaldehyde 14) dimensions: 600 x 600mm, 600 x 1200mm 15) thickness: 7.5mm, 8mm, 9mm, 10mm, 12mm, 14mm, 15mm, 18mm Carton
Pos. Number 135.2 Rear Liner 1.4517 used for Andritz S 125-400 DD Centrifugal Pumps. The Rear Liner 135.2 suitable for Andritz S Series, the model: S 80-265, S 100-265, S 125-265, S 100-350, S 125-350, S150-330, S125-400, S 150-400, S 200-380, S 150-470, S 200-470, S 250-430, S 350-470, S 500-600, S 600-700. manufacture a range of replacement parts including impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), casings, casing cover, front lining, rear lining, stuffing box body, shaft etc which for Andritz S series pumps, ACP series pumps, FP series pumps etc
Details Our company has exported ceiling tiles for over 16 years. Till now we can produce more than 18 kinds pattern of mineral fiber ceiling tiles. Those products provide heat insulation and soundproof, which is a durable, versatile choice for many environments:Offices - Retail&Hospitality- Corridors- Auditorium,Cafeteria- Theaters- Libraries- Lounges- Shops- Canteens etc. Our mineral fiber ceiling tiles can be recycled and reused. They are marketable in many countries,such as Middle East, Africa, Europe, South America, Australia etc. FEATURES: Material: High Qualit y Mineral Wo ol Surface coating: V inyl Emulsion Paint Thermal Conductivity:
Description 19206-XX-30 Impeller for Mission Magnum 4x3x13 Centrifugal Pumps. Fully open impeller, best design for the chemical process industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers with ease. Allows for simple restoration of clearances when wear takes place. Back pump-out vanes reduce pressure on the shaft seal, reduce axial thrust on the bearings. Part size cast into the impeller. This makes part identification easier. Impeller gasket in included with impeller All impellers are dynamically balanced Offered Hard iron and other materials upon request All impellers are investment casted or resin-casted with pickling (acid washing) as our power-end parts, which are also available in cast steel in favor of ductile. All other sizes are resin-casted with pickling (acid washing) to ensure smooth surface finish. To ensure quality, we meticulously check threaded holes by fitting their bolts to ensure the threads are clean and clear. All casings are of course pressure tested and all impellers and dynamic balanced. Each casing is properly pressure tested prior to shipping. Our impellers are comparable to famous pump
Interchangeable Pump Parts Impeller ACP 80-250 3+3 SO of EN.1.4474 are widely used for highest efficiencies in various industrial applications.
Ceiling T-Grid/ Ceiling support bar/Ceiling suspension T bar with high materials. Product with anti-corrosion and moisture. Also with ametabolic, fastness ceiling support bar that widely used in hotel, home, bus station, supermarket, office building, shopping mall, retallm hospital, corridor and so on. Normal plane T-Grid/ T-Bar System Main Tee Size:(Height*Width*Length) 38*24*3600mm 38*24*3660mm 38*24*3750mm 32*24*3600mm 32*24*3660mm 32*24*3750mm Thickness: 0.25mm, 0.30mm, 0.35mm, 0.40mm Cross Tee Size:(Height*Width*Length) 26*24*1200mm 26*24*1220mm 26*24*600mm 26*24*610mm THickness:0.25mm,0.30mm Wall Angle Size:(Height*Width*Length) 24*24*3000mm 22*22*3000mm 20*20*3000mm Thickness: 0.3mm, 0.4mm Narrow(Slim) Plane T-Grid/ T-Bar System(SPT system) Main Tee Size:(Height*Width*Length) 38*15*3600mm 38*15*3660mm 38*15*3750mm 32*16*3600mm 32*16*3660mm 32*16*3750mm 32*14.5*3600mm 32*14.5*3660mm 32*14.5*3750mm Thickness: 0.26mm, 0.30mm, 0.35mm, 0.40mm Cross Tee Size:(Height*Width*Length) 32*14.5*1200mm 32*14.5*1220mm 32*14.5*600mm 32*14.5*610mm Thickness:0.26mm, 0.30mm Wall Angle Size:(Height*Width*Length) 24*15*3000mm 20*15*3000mm Thickness: 0.30mm, 0.40mm Shijiazhuang Shengyi Building Materials Co., Ltd is the leading manufacturer in China which specializes in producing Ceiling T Grid, Magnesium Oxide Board/ MgO Board, Mineral Fiber Board and other ornament materials. Our factory located in Outlet of Shihuang Expressway, Jinzhou City, Hebei Province, China. Our team has abundant of experience in export, integrating our partner factories' production capability, R&D, and Quality Control. Welcome your visit and inquiry.
Product Details (1) It's made of galvanized steel strip and prepainted steel strip. (2) It integrates such properties as elegant appearance, anticorrosion, high toughness, easy installation,etc. (3) It's usually packaged in carton box. The packing quantity is customizable. (4) It's applied to fix various ceiling materials like miner fiber board, PVC gypsum board, PVC panel, etc. (5) It is widely used in the office building, hotel, restaurant, supermarket, cinema,living room, etc. FAQ 1. If your comp any have the the ability to do OEM ? Yes , we accept and OEM depend on client?s requirement. 2. What is the delivery time ? Normally our delivery time is within 15-25days 3. What is your MOQ ? Our MOQ is 1*20 container;Or Special order as actual situation . 4.What is your payment ? As actual situation to negotiate 5. What's the loading port? Tianjin/Qingdao port
Advantage 1. High grade galvanized steel as main material, non-deforming, fadeless, moisture proof and anti-corrosive. 2. Strong close fitting, high symmetry. 3. High load capacity. 4. Easy and fast installation, save installing time and labor cost. 5. Large production line and strict product inspection, larger quantity and better quality are available. 6. We can also provide full set of the matched accessories . If you're interested in our products, please feel free to contact us! We specialized in manufacturing ceiling grid with over 10 years experience.Now we mainly export to Eastern Europe, Asia, MiddleEast, South America and Africa.Good quality with the best prices product will be supplied for you. Our Services 1. Perfect workmanship. Always committed to research and development. 2.Ensure the products meet the quality standards 3.Ensure the goods will be delivered on time. 4.We will reply you within 24 hours. 5.Provide warm and friendly service and after-sale service. 6.Guaranteed the good quality and best service, you will find that imported directly from us is so easy and simple as you buy from local supplier. Competitive price and more choose. 7.Assorted designs, colors, styles, patterns and sizes are available.
Features: 1) Material: Mineral fiber sound insulation board 2) Surface: A variety of surface patterns available 3) Coating: PVDA 4) Color: White 5) Density: 350-420kg/m 6) Fiber content: >90% 7) Fire performance: Meet CNS6532 Class 1 8) Product content: Mineral fiber 9) Thermal conductivity: 250N 11) Noise reduction coefficient: NRC 0.4 - 0.6 depending on the pattern and the thickness Carton with PVC film
PVC embossed films are used for ceiling tiles. This product is well sold in Middle East, Africa, South-America, Southeast Asia etc and win appreciation from customers. Product Description 1.Good resistance to climate change, and the geometry of the stability. 2.Light weight, tension strong, fire resistant, acoustical absorption, warm keeping, non-deformation. 3.Water-proof, smoke-proof, moisture-proof, mould-proof, fading-proof, heat-resistant and cold-preventing, anti-static. 4.High intensity and strong tension, hard to twist under pressure. 5.Beautiful and unique designs, with coverage of any patterns you want, being installed with keel(T-bar) could get excellent decoration effect and makes life relaxed and delightful. 6.Green building material both for environmental protection and human health, with features of no pollution and no radiation, do no harm to human health. 7.Anti-static is another advantage of it, this makes it widely used in lab, work office etc. Specification: 1.Width: 1230mm or customized 2.Length: 600-650m/roll or customized 3.Thickness: 0.06mm-0.07mm or customized 4.Main Material: PVC 5.Color: white or other printed color 6.Application: mainly used as decorative cover material for audio boxes and gift boxes, cabinet, panel, formed wooden doors, or indoor decorations and furniture. 7. Pattern: 154, 238, 996, 239, 991, 975, 567, 239 etc. Thickness Weight 0.065mm 98-100 g/m 0.07mm 105-108 g/m 1230mm*600m*0.07mm;1230mm*600m*0.065mm;1230mm*650m*0.07mm;1230mm*650m*0.065mm;
