Find Verified Die Cut Boxes Suppliers, Manufacturers and Wholesalers

Brush steel wire is a kind of steel wire for different uses to select the corresponding type and is used for brush-making, It has two kinds of steel wire, straight wire and crimped wire. The thickness of the wire, improve its wear resistance and fatigue resistance. Steel wire brush materials also include spring steel wire, galvanized steel wire, brass coated steel wire, etc., which have good elasticity and durability, and suitable for various industrial and environmental applications.

Brush wire Normal size:
0.1mm/0.15mm/0.20mm/0.25mm/0.3mm/0.35mm/0.45mm/0.5mm/0.6mm/08mm

Different materials for Brush wire:
1. Hard drawn steel wire;
2. Oil quenched +tempered steel wire;
3. Black steel wire;
4. Brass coated steel wire;
5. Galvanized steel wire;
6. Stainless steel wire;
7. Crimped steel wire;
8. Flat wire, normally for sweeper brooms for rood brush;
9. Countless end wire;
10. Cut length wire;
11. Brass wire;
12.Phosphor Bronze Wire etc.

HYJL-12 High Voltage Metering Cabinet (box)
HYJL-12 high voltage metering cabinet (box) (hereinafter referred to as "floor type metering box "), suitable for AC three-phase AC 50Hz, rated voltage 10kV power system as a high voltage cable into the user's electric energy metering, can be installed in parks, residential communities, industrial and mining areas of the roadside lawn, can directly open the door to see the bottom of the meter and local circuit breaker switching operation.
The floor type measuring box is mainly composed of vacuum circuit breaker, cast type combined CT, lightning arrester, live display and intelligent control device, etc. The measuring mode is three-phase three-phase system and three-phase four-wire system, which can be configured with zero sequence current transformer for grounding protection. The floor type metering box conforms to GB/T 1984-2014 "High voltage AC Circuit breaker", DL/T 402-2016 "High voltage AC Circuit breaker", DL/T 403-2000 "12kV~40.5kV High voltage vacuum circuit breaker ordering technical conditions", GB/T 17201-2007 "Combined transformer" and DL/T 721-2013 "Distribution automation system remote terminal" and other technical standards.
High Voltage Switchgear Cabinet� Normal operating conditions
Altitude: not more than 1000m, if the altitude is higher than 1000m, the rated insulation level should be corrected accordingly;
Ambient temperature: upper limit +45â??, lower limit -40â??, maximum daily temperature difference 25K;
Humidity: average daily relative humidity â?¤95%, average monthly relative humidity â?¤90%;
Solar radiation intensity: 0.1Wcm2;
Wind speed: 34m/ s;
Wind pressure: 700Pa;
Pollution grade: e� level;
Ice thickness: â?¤10mm;
Withstand earthquake resistance: horizontal acceleration 0.3g, vertical acceleration 0.2g.
� Structural characteristics
Small footprint, less investment, cost-effective;
With automatic power supply, data processing, display, storage, alarm and automatic power off functions;
Equipped with anti-theft device, can reduce unnecessary power loss for the power system;
With pre-payment function to avoid users defaulting on electricity bills;
The box is stainless steel floor structure, beautiful appearance and easy installation.
https://www.cntdelectric.com/

Bottom-turning hydraulic box turner machine
The hydraulic box flipping machine mainly consists of a flipping body, a base, a hydraulic cylinder, an oil circuit, an executing cylinder, and a box for the box flipping machine control.
Main functions and advantages
1. The use of hydraulic energy to convert into mechanical energy has the advantages of stable operation, strong environmental adaptability, convenient maintenance, and simple operation.
2. The tilting cylinder body and clamping cylinder hydraulic system are equipped with hydraulic locks, which enable the equipment to stop and start in real-time during operation, avoiding various dangerous situations caused by sudden shutdown due to power failure. After the power failure is restored, the operation can be completed manually.
3. The flipping body adopts a bottom clamping flipping box design, which is safer and more stable.
4. Realizing online box flipping operation greatly saves the time required to lift the sand box off the operating line for box turnover operation without a box turnover machine.
5. The control system is integrated into the operation control cabinet, and for the convenience of equipment operation, the control box can be placed nearby according to the equipment position.
Equipment performance and characteristics
The equipment adopts a double acting single rod piston type oil cylinder placed behind the flipping body, and the columns on both sides are connected to the flipping body through bearings, ensuring better stability during flipping, smoother operation, and more convenient installation.
The sand box operates to the flipping position, and the proximity switch feedback signal is sent to the electric control cabinet. The clamping oil cylinder on the flipping body acts in place, the sand box is clamped, and the pump station outputs oil to the tilting oil cylinder. The flipping body and the sand box are tilted 120° with the base bearing as the center, and the molding sand and casting slide diagonally to the sand receiving part of the sand treatment system, and the casting is produced; After the molding sand is cleaned, the pump station supplies oil in reverse, the flipping body returns to its original position, the clamping oil cylinder is released, and the sand box operates to proceed with the next flipping action.

Both the Hydraulic Mold Box Turning Device and the Bottom Turning Mold Handling Equipment utilize a hydraulic system to rotate sand boxes (mold boxes) in lost foam casting production lines. These devices are ideal for heavy-load mold handling and are integral in the molding and casting preparation stages.
Guoning offers reliable and customizable equipment tailored to your specific production line layout and load requirements. Both systems help reduce manual labor, increase safety, and improve overall production efficiency.

Hexahydro-1,3,5-Tris(hydroxyethyl)-S-Triazine is a triazine derivative contained in cutting fluids. It is a formaldehyde releaser. Hexahydro-1,3,5-tris(hydroxyethyl)-s-triazine is an amine and an alcohol. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides.
Hexahydro-l,3,5-tris-(2-hydroxyethyl)triazin is used in organic synthesis; as a bactericide in cooling fluids and various cosmetic products; formaldehyde liberator. Hexahydro-1,3,5-tris(hydroxyethyl)-s-triazine is probably combustible. It is a triazine derivative contained as a bio cide in cutting fluids. It is a formaldehyde releaser. Dermatitis, delayed-type allergic conjunctivitis, and asthma were described.

Fungicide, used in paint, pigment, leather, wood, etc. It is an effective antiseptic and antiseptic, mainly used in cosmetics, daily chemicals, paint, leather, plastic, wood, metal cutting fluid, wood discoloration control, Textiles, paper industry, ink, adhesives, etc. This product is a new anti-dandruff, antipruritic, bactericidal and antiseptic. At the same time, this product is low-toxic and non-irritating at the use concentration (â?¤ 0.1%).

Used in the production of acetylene gas, polyvinyl chloride, lime nitrogen, dicyandiamide, iron and steel desulfurizer, etc., used in electronics industry, teaching reagents. Calcium carbide is used for chemical production accounts for about 60%, and the remaining 40% is used for metal welding and cutting. Using calcium carbide as raw material can produce a series of chemical products, such as PVC resin, polyvinyl alcohol, vinyl acetate, neoprene rubber, butanol, octanol, tricyanoethylene, tetracyanoethylene, acetaldehyde, acetylene carbon black, lime nitrogen, etc.

Glyphosate, chemical name is N-(phosphomethyl)glycine, chemical formula is C3H8N05P is a systemic broad-spectrum herbicide, belonging to the category of organophosphorus compounds.

lyphosate dissolves the wax layer on the surface of the leaves, branches and stems of weeds, and the drug effect quickly ente
rs the plant conduction system, hindering the biosynthesis of aromatic amino acids, especially inhibiting 5-enolpyruvylshikimate-3-phosphate synthase (EPSP synthase), resulting in the accumulation of shikimate in the organism, thereby causing the weeds to die.

Glyphosate is metabolized very slowly in higher plants, with high operating performance and slow degradation performance, so it has a good control effect on perennial weeds.

Application areas
Glyphosate is widely used in chemical weed control in orchards, mulberry gardens, tea gardens, rubber plantations, grassland renewal, forest fire roads, railways, highway wastelands and no-till land. In addition, glyphosate is also used for weed control of glyphosate-resistant genetically modified crops.
The global market demand for glyphosate is large, with sales reaching more than US$5.3 billion in 2018, accounting for about 42% of the sales of the top 15 herbicides.
Safety
Glyphosate is considered a low-toxic herbicide that has a certain irritation to the eyes and skin, but does not accumulate in animals, has no teratogenic, mutagenic, or carcinogenic effects, has low toxicity to fish and aquatic organisms, and is non-toxic to bees and birds.


Stainless steel wire, also known as stainless steel wire, is a variety of silk products with different specifications and models made of stainless steel. The cross section is generally round or flat. Common stainless steel wires with good corrosion resistance and high cost performance are 304 and 316 stainless steel wires. The metal plastic processing process in which stainless steel wire pulls wire rod or wire blank from the die hole of wire drawing die under the action of drawing force to produce small cross-section steel wire or non-ferrous metal wire. Metal wires with different cross-sectional shapes and sizes of various metals and alloys can be produced by drawing. The drawn wire has accurate size and smooth surface, and the drawing equipment and die used are simple and easy to manufacture.

Specification Application
EL-10 EL12 EL-20 HEL-20
1. Soluble in most organic solvents, dispersed in water, with excellent emulsification and diffusion properties.
2. In the textile industry, it is mainly used as a spinning oil for synthetic fibers such as polyester, polyacrylonitrile, and polyvinyl alcohol. It has emulsifying and anti-static effects, making the sizing soft and smooth, and reducing breakage; It can be used as a softening and smoothing agent in chemical fiber size, and can eliminate foam in synthetic size solution; HEL-20 also has the characteristic of low coking at high temperatures.
3. In the pharmaceutical industry, it is used as an emulsifier in the manufacturing of liniments, creams, emulsions, etc.
4. It can be used as pesticide emulsifier, lotion polymerization emulsifier, and used to prepare water-soluble metal cutting fluid and household washing products.
EL-30
EL-40
HEL-40 1. Easily soluble in water, fatty acids, or other organic solvents, with excellent emulsification performance
2. Used as emulsifiers in the ink and pharmaceutical industries.
3. It can be used as an emulsifier for organic phosphorus pesticides.
4. Used as an o/w type emulsifier for emulsification of various planting, animal, and mineral oils.
5. EL-40 is used as a component of wool, wool oil and chemical fiber oil in the textile industry, which has both emulsifying effect and antistatic effect. It can be better mixed with other antistatic agent, and can also be used to prepare size to eliminate foam in synthetic size. EL-40 has excellent diffusion and protective colloid properties, and is used as a monomer in the wool spinning industry for blending with wool oil. It is easy to wash off and has good hard water resistance.
6. Used as a dehydrating agent for oil field raw oil.
7. Used in the metal processing industry to prepare water-soluble metal cutting fluids.
8. HEL-40 can be used as a pharmaceutical grade solvent.
EL-60 1. This product is an o/w emulsifier.
2. It can be used as a chemical fiber oiling agent and a component of petroleum.
3. Pesticide emulsifier.
4. Petroleum dehydration demulsifier.
5. Ink, printing paste emulsifier.
6. Various planting, animal, and mineral oil emulsifiers.
7. Used as an emulsifier, fat enhancer, and emollient in the cosmetics and pharmaceutical industries.
8. It is used to manufacture shampoo foam bath liquid, skin care products, pharmaceuticals, etc.
9. Used in the metal processing industry to prepare metal cutting fluids.
EL-80
EL-90

Metal cutting fluid bactericide MBM is a slow-release bactericide with broad spectrum and high efficiency and a certain gas-phase sterilization ability. It is suitable for inhibiting the growth and reproduction of microorganisms in various humid environments, preventing the generation of putrefaction and foul odors, and ensuring safe operation of the system.

Sexual fungicide, the product has good solubility, suitable for oil and water based systems.

In addition to the bactericidal effect, the product also has a certain anti-rust effect of black metal.

MBM is a new generation of broad spectrum and low toxicity developed for water-based metalworking fluids

Sexual fungicide, the product has good solubility, suitable for oil and water based systems.

In addition to the bactericidal effect, the product also has a certain anti-rust effect of black metal.

MBM is effective against both gram-negative and Gram-positive bacteria. MBM is effective against both gram-negative and Gram-positive bacteria.

DBNPA is widely used in industrial circulating water systems, large air-condition, and large centers of sewage treatment to eliminate microorganisms and algae and shuck off clay. DBNPA is also used in the process of paper making to prevent reducing the quality of paper by the generation of microorganisms. DBNPA is suitable for metal cutting of cooling liquor, recovery system of oil, latex, and ply-woods as anti-spy biocides. DBNPA has the following advantages: easy to handle; no unusual oxidation hazards; similar performance and safety in paper and oilfield applications; used for slime control in the wet-end of the paper mill and performs exceptionally well against slime-forming bacteria. DBNPA has exhibited outstanding efficiency against bio-films and a broad spectrum of bacteria, fungi, and yeasts.

Additionally, DBNPA series products are used in the short-term preservation of coatings and coating additives such as latex, starch, and mineral slurries. DBNPA is a fast-acting/quick-kill biocide that is broad-spectrum and does not contain or release formaldehyde.

Material: Stainless steel F304/F316L
Standards: ASTM A182, BS EN 10226
Process: Die forging + CNC precision machining
Applications: Pipeline branch reinforcement, perforated connections, high-pressure pipelines
Advantages: Forged one-piece structure, deformation resistance, precision tolerances, corrosion resistance, suitable for chemical, power, and overseas projects.

5Pcs Reusable Plant Rooting Ball Cutting Grafting Rooting Ball Equipment Garden Sapling Propagation Breeding plant Growing Box 12/8/5cm Diameter
1. Plastic material: This plant rooting ball is made of high quality material which is safe and durable.
2. Adjustable: The bottom can be adjusted reasonably according to the diameter of the branches.
3. Automatic buckle: There are buckles on the side, more secure, more convenient, more flexible in disassembly and assembly, and can be completed by one person.
4. Observation port: Branches can be extended from the observation port. Seal with black tape when not in use. Prolonged ventilation can affect rooting time.
5.Use occasions: Suitable for almost plant branch grafting.

Automatic expansion of diamond mesh rolling machine
Item Type-A Type-B
Thickness of strip 0.4-0.55mm 0.4-0.55mm
Strips width 54mm 65mm
Filter Diameter range �¦80-500mm �¦120-630mm
Latin American network expansion width 109mm 130mm
Speed 0-6m/min 0-6m/min
Seams Way Inside and outside the flat outer seams Inside and outside the flat outer seams
Cutting mode Pneumatic circular blade cutting track continuous non-stop Pneumatic circular blade cutting track continuous non-stop
Total Power 4.37 KW 4.37 KW
Weight 1200 kg 1200 kg
Dimension L1700mm*W1100mm*H1500mm L1700mm*W1100mm*H1600mm
Seams way Pneumatic circular blade cutting track, continuous non-stop
Application Material Fingerprint-resistant sheet, galvanized DX53D+Z board
Applicable product dust filters, air filters, kinds of interior and exterior mesh filters and supporting mesh

Price of product ( USD price or FOB price) :
USD 24.63

Key Specifications/Special Features :
COLOR: WHITE

Minimum Order Size and Packaging details :
Min.Order Quantity: 10000 Packing : 10pcs/box. Box size: 56.5*85*53CM . # of boxes/carton: 100 BOX Carton size: 520 * 425 * 450 mm. Expiration Date: 2 Years.Storage Conditions: Humidity < 80%, keep indoor, ventilation.

The product is a colorless and transparent new polymer materials, a variety of different viscosities (5cps ~ 2million cps), the liquid from flowing easily into a thick semi-solid material. This product has a special smoothness, softness, hydrophobicity, good chemical stability, excellent electrical insulation and resistance to high temperature. High flash point, low freezing point, long-term using between -50 �ºC ~ +200 �ºC, low viscosity-temperature coefficient, high compression ratio, low surface tension, water-repellent moisture resistance, low heat conduction coefficient.
Because it has special and excellent physical and chemical function, it can be used in many different industries:
1. Cosmetic industry for skin care cream, bath gel, shampoo and other cosmetic formulations with excellent softness and silky feel.
2. Rubber, plastic, latex, polyurethane, light industry: as a model release agent, brightener agent and release agent of some rubber, plastic, latex, polyurethane products and handicraft production.
3. Machinery, automotive, instrumentation, electronics and other industries used as high-grade lubricants, liquid springs, cutting fluids, buffers oil, transformer oil, high temperature brake fluid, brake fluid, instrumentation damping oil, mold release agents and other modeling framework.
4. Textile, apparel industry as a softener, water repellent, feel modifiers, sewing thread lubrication, chemical fiber spinneret pressure lubrication and clothing lining additives.
5. Add it to other additives in leather and leather chemicals industry, it can be used as softeners, water repellent, feel agents, defoamers, brighteners.
6. Pharmaceutical, food, chemical, paint, building materials industry as defoamers, lubricants, and other weather-resistant paint.
7. Other specific purposes and other new materials.

Wall Spikes are a simple yet effective method of enhancing the security of an existing wall or security fence.
The wall spikes are easy to install and come in a variety of coatings or finishes.

Follows Contours of Wall

Neat Appearance
Easy to Install
Low Cost
Effective Intrusion Deterrent

Wall Spike (Big Size)
Material:Galvanized zinc steel plate ,stainless steel plate ,Gal+Polyester coating,color can be desighed according to the customers need .
Production process :The goods ,here we called wall spike was produced through an special die with skill of one-time
molding by using ourself-developed automatic production equipment.The bending strength is greatly increased by use of ribs on the bend .
Also the protect function was improved
.The productivity and quality are more superiors than manual when using our machines .Rate of qualified products can catch up to 98%.
Characterristics:With good protect function,beautiful appearance, easy to install ,economical cost.
Application :Gardens and apartment, offical buildings,prison ,border by installed on the wall or steel fence with expansion screw .
Thickness :2mm
Length :1m,1.25m,1.5m,2m(can adjusting depends on request)
Packing:Carton box +pallet (30 pieces per carton)
The use of ribs on the bend have greatly improved the bending strengh,not east to fold and break off, whice have been national patented .(Patent NO:2015204324207)

HR-A1 STYLE BIG WALL SPIKE(HAVE STOCKS)


Thickness: 2mm

Weight: 1.75kg/pcs

Barb Length: 110mm

Barb Spcaing: 78.3mm

Bottom Width: 50mm

Material: Hot Galvanized; PVC; Electrophoretic; Stainless steel 304.

Packing: 30pcs/carton

Length: As your required.
Normal Length: 1.25m; 1.28m.

DESCRIPTION
CHM 08A can be used for copper-coated solid welding wire for submerged arc welding. Weld metal zone has excellent synthetic technological properties when corresponding welding flux is used. With a higher deposition efficiency, high quality and low intensity of labour, etc.

APPLICATION
The welding wires are used for welding important structures of low carbon structural steel and low alloy steel. Such as boilers, pressure vessels from chemical works and nuclear power station, bridges and ships, etc.

Sizes of wire: Diameter 1/4 mm 2.0 2.5 3.2 4.0 5.0

Typical mechanical properties of deposited metal: Accord with GB/T14957-94

Yield point 0.2 Mpa
Tensile Strength �?0.2 Mpa

Elongation 5%

V-Type Charpy Impact
Value (ambient temp.)J

409

527

28.3

65

Steel Grating
It is steel bar according to a certain distance and cross arranged and welded into the middle of a square latice with an iron and steel products .

bearing bar 25/3mm , 25mm/4mm , 25mm/5mm , 30/3mm , 30/5mm,32/3mm,32/5mm ,40/3mm75/5mm,100/10mm
opening 30mm x 32mm , 30mm x 60mm, 30mm x 100mm , 38mm x 100mm , 40mm x 100mm , 50mm x 50mm ,50mm x 100mm etc
surface treatment black , hot dip galvanized
type plain bar, serrated bar , I shape bar
Hot dip galvanized steel grating tolerance

The allowed deviation of length is +0/-5mm, while the allowed deviation of width is +/-5 mm. The non-perpendicularity of bearing bar is allowed no more than 10% of width of bearing bar. Cross bar surface should not surpass bearing bar surface 1mm, beginning & end of cross bar should not surpass the end surfaces of two sides of grating 2mm.

Features
Corrosion resistance, Rust resistance.
Anti-slip resistance, Good air circulation.
Good drainage performance, Easy to install and uninstall.
High strength-to-weight performance,Durable and long lifespan.

Applications
Steel grating is widely used for work platforms. Catwalks, transportation
servicing areas and vehicle steps.

3D welded wire mesh fence system offers security but without an oppressive and intimidating appearance.

The mesh is 50x200mm, fully welded at every intersection.

The width of the panels suits post centre of approx. 2500mm

Welded wire mesh fence is available in a galvanized finish; in addition they can be colour coated in a wide choice of colors.

height width thickness size
Mesh panel 1.8m 2m/2.5m 4mm/5mm
Square post 1.8m/2m 1.5mm 60mm*60mm
Peach post 1.8m/2m 1.2mm 50mm*70mm70mm*100mm
Round post 1.8m/2m 1.5mm/2mm 48mm/60mm
Hole opening 50mm*200mm , 50mm*100mm
support leg 300mm
Post cap Plastic cap or Steel cap
Clamps Plastic clamps or steel clamp
Bolts&Nuts According to need
Single arm or double arm On request
Tension wire or barbed wire On request
Concertina razor wire On request
Anti-corrosion

Folded security fence panels are fully welded and 100% hot dip galvanized offering great strength , protection against corrosion and an incredibly long product life.

Easy to install

product installation without special accessories the use of propulsion installation , easy to hold grip simple and quick , reduce costs.

Safe fashion

The Folded panels are electric galvanized and can be powder coated any color to provide you with a stylish , and exceptionally long lasting fence