Descriptionporcelain floor tiles Surfacepolished/glazed Available size600x600, 800x800, 1000x1000 Available colorwhite, pink, yellow, or as your request Materialporcelain Water absorption
Cobalt oxide (Co203) is an expensive cobalt oxide with a theoretical cobalt content of 71.06%, an oxygen content of 28.94%, and a density of 6.079/cm3. It is a black amorphous powder that generates cobalt oxide (Co304) after heating. Cobalt oxide is an unstable compound and cannot be freed. The cobalt oxide commonly referred to actually still contains a certain amount of cobalt tetraoxide. Co203 is only stable in a hydrated state. This hydrate will dehydrate and transform into the intermediate oxide cobalt tetraoxide (Co304) at 265�°C. Cobalt oxide is reduced to cobalt tetraoxide (Co304) by H2 at 125�°C, reduced to CoO at 200�°C, and reduced to cobalt metal at 250�°C. Cobalt oxide is insoluble in water. After dissolving in water, it decomposes into hydrates when it encounters water. It is insoluble in water, but soluble in acid and forms corresponding salts.
Ceramic Shaft Sleeve for Slurry Pump and gravel pump is a kind of inorganic nonmetallic material. Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride. Compare with similar products, ceramic density is about 5% higher than others, and double flexural strength higher at normal temperature. Ceramic Slurry Pump spare parts is a kind of inorganic nonmetallic material. Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride. Compare with similar products, ceramic density is about 5% higher than others, and double flexural strength higher at normal temperature. The Ceramic Slurry Pump Parts mainly included impeller, Liners, Throat bush, Volute, Shaft Sleeve etc., the abrasion resistance of ceramic slurry pump parts are 5 times as wearable as high chrome slurry pump parts. However, the weight of ceramic spare parts is only 1/3 of chrome spare parts. Slurry Pump Ceramic Shaft Sleeve which has undergone destructive field tests for over 18 months, has proved to extend part life several times that of steel shaft sleeves on the same pump, same service. Total maintenance costs and downtime were reduced accordingly. slurry pump ceramic shaft sleeves are precision formed of high-density alumina, fired, and ground to size. The hardness of ceramics (9.0 to 9.5 MOH Scale) resists this destructive action, In addition, the ceramic coated sleeve surface is highly polished which, together with its lower coefficient of friction, results in extended sleeve life and long service from the packing. offers part codes for ceramic shaft sleeves include: B075J04, B075J05, C075J04, C075J05, CH075J04, CH075J05, CH076J04, CH076J05, D075J04, D075J05, E075J04, E075J05, F075J04, F075J04, FAM075J04, FAM075J05, FAM076J04, FAM076J05, PE075J04, PE075J05, PF075J04, PF075J05, G075J04, G075G05, SH075J04, SH075J05, SH076J04,SH076J05, GH075J04, GH075J05, GH076J04, GH076J05.
Place of Origin:Hebei, China (Mainland) Brand Name:DISHI Model Number:DS-SHAVINGBOWL02 Material:Ceramic Color:orange Logo:Customer Logo Size:112*85*82MM Product Name:Shaving Brush Bowl MOQ:500pcs Packing:paper box and Bubble packaging Use:Normal Skins Works with:shaving brush Shape:as the picture shows
Bone China mug 0.028cbm, 7.0kgs
Ceramic beads is high grade green casting material, made of high Alumina Calcined Bauxite, processed through fusing, spraying, sieving, get rid of impurity and special procedures. With ideal spherical shape, excellent fluidity and filling property, Ceramic beads is widely used in various sizes of steel/iron/alloy casting parts. It is suitable for various bonds of casting mold and can meet different needs of various customers. Specification (Size): AFS20/AFS30/AFS40/AFS50/AFS55/AFS65/AFS75/AFS90/AFS100 Special grades can be customized. Shape: Spherical  Shape
Fiberglass plain woven wire netting, also called invisible wire netting, is made from fiber glass which pvc coated single wire, produced by plain weaving Brief description 1. Material: fiberglass 2. Standard mesh/inch: 20*20, 20*18, 18*18, 18*16, 18*14, 16*16, 16*14, 14*14 etc. 3. Standard colors: gray, black, white, green, yellow, gray-white mix. Etc. (available of other colors) 4. Standard width: 5"?110"
Fiberglass mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex. It has fine alkaline-resistant, high strength, etc. As an ideal engineering material in construction. Material Fiberglass woven Usage It reacts important affect in heat preservation system, prevent crack and widely used for wall warm keeping, wall material and cement reinforcing, surface decorating, mosaic back mounting, crack repairing and so on. Package Bags or as customer's request. Colors White (standard), blue, green, or other colors. Characteristics It has excellent properties like high alkali-resistance; good cohesion, flexibility, tensile strength, etc. Coated fiberglass mesh can be widely used in wall heat reservation system, water-proof and preventing cracks. We can supply special mesh as following: (1) high strength mesh (2) fire proof mesh (3) strong and flexible mesh We can supply specifications from 30g/m2 to 500g/m2 for mesh.
Good Wear Resistance 1 Super wear-resistant alloy's hardness HRC 56, have good wear resistance and thermal stability. 2 Good shock resistance, metal bonding properties, thermal shock resistance 3 Good heat resistance and corrosion resistance 4 The composite of low cost and good quality 5 Transportation, installation and easy to use
Anticorrosive treatment for ferrous metal production in electroplating industry, also used as metal surface treatment agent, used as colorant in ceramic industry. In surface treatment applications, used as an analytical reagent and anticorrosive agent, mainly in phosphating solutions for iron and steel parts. Used as embalmment of making black metal in the electroplating industry, capacity superior to manganese dihydrogen phosphate. Also used as anticorrosive and phosphatizing treatment chemicals of metal surface. In the ceramic industry is used as colorant and in the glass industry, it is used as clarifier.
Classification Aluminum oxide CAS 1344-28-1 another name Aluminum oxide chemical formula Al2O3 EINECS 215-691-6 Grade Standard Medicine Grade, Reagent Grade concentration 99% appearance White amorphous powdery substance use Functional ceramics, electronic ceramics Product name Aluminum oxide Product appearance White amorphous powdery substance chemical formula Al2O3 molecular weight 101.961 CAS number 1344-28-1 EINECS 215-691-6 melting point 2050 Application Water treatment
230v, 50hz
Sodium metasilicate pentahydrate is a non-toxic, tasteless, non-polluting, white crystalline powder or granules, has a strong alkaline, detergency strong buffer force, with detergent, emulsifying, dispersing, wetting, permeability and PH value has buffering capacity. Widely used in various types of configuration lotion, metal surface cleaning, ceramic grinding aids, paper deinking and the like, are mineral products, moisture in air easily deliquescence, is the most widely used sodium metasilicate most typical one . Features High solubility in cold water is also dissolved, uniform particles, good liquidity, high brightness, little impurities, high mechanical strength, no dust. Applications 1.Metasilicate in the industrial field detergents, ceramics, electroplating, textile, printing and dyeing, paper, cement, concrete, refractories, oil and leather processing has a large number of applications. 2.Application of a large amount of industry sort is: Ceramics, industrial cleaning, detergents, concrete, printing and dyeing, paper, cement, oil exploration, etc.Will be applied to the detergent sodium metasilicate. 3.In inorganic electrolytes, the active alkalinity and PH buffer highest index metasilicate, there is a strong wetting, emulsification and saponification role grease, with excellent performance in the removal of dispersed and suspended dirt aspects and to prevent dirt redeposition.
Product name : Lanthanum Oxide Formula : La2O3 CAS No. : 1312-81-8 Purity : 99.9-99.999% Color : White Powder Feature * Soluble in acid and ammonium chloride, insoluble in water and ketone. Application * It is mainly used to manufacture special alloy precision optical glass, high refractive optical fiber board, suitable for making cameras, microscope lenses and advanced optical instrument prisms, etc. * * It is also used to manufacture ceramic capacitors, piezoelectric ceramic dopants and X-ray luminescent materials such as lanthanum bromide oxide powder. It is used as a catalyst for various reactions. Lanthanum oxide impregnated with lithium oxide or zirconium oxide (1%) can be used to manufacture ferrite magnets, fiber optical devices and optical glass.
Mica powder is a non-metallic mineral, containing a variety of components, of which the main SiO2, the content is generally about 49%, Al2O3 content is about 30%. Mica powder has good elasticity and toughness. It is widely used in electrical appliances, welding rods, rubber, plastics, paper, paint, coatings, pigments, ceramics, cosmetics, new building materials and other industries
Tetra Potassium Pyrophosphate, TKPP, metal cleaning agent Specifications Tetra Potassium Pyrophosphate Molecular Formula: K4P2O7 Molecular weight: 330.34 Standard executed: HG/T3591-1999 Tetra Potassium Pyrophosphate Packing: 25kg woven bag Volume/ 20FCL: 22MT Uses : It mainly applied to electroplating without cyanate, industrial or household detergents; It can used as a buffering reagent as well as stabilizer for hydrogen peroxide; It can also be used as dispersion agent for ceramic, clay, latex and pigments etc.
It is strongly alkaline and corrosive. It can be used as acid neutralizer, matching masking agent, precipitating agent, precipitation masking agent, color developer, saponification agent, stripping agent, detergent, etc. With strong alkaline and strong hygroscopicity. Easily soluble in water, exothermic when dissolving. The aqueous solution is alkaline and greasy. It is highly corrosive and is corrosive to fibers, skin, glass and ceramics. It reacts with aluminum, zinc, non-metallic boron, and silicon to release hydrogen, and undergoes disproportionation reaction with halogens such as chlorine, bromine, and iodine, and neutralizes with acid to generate salt and water.
Our industrial grade iron oxide pigments are an efficient, stable and cost-effective industrial pigment to improve product quality! And have excellent coloring and hiding power, whether used in architectural coatings, road markings, plastics, rubber or ceramics, they provide bright and long-lasting color effects. Our iron oxide pigments are used in the manufacture of various bricks, including red bricks, yellow bricks, decorative bricks and landscape bricks.Whether it is residential buildings, commercial buildings or landscape buildings, our products can meet your needs.
Zinc oxide is white powder, with good hiding power and tinting power, widely used in printing & dyeing, rubber, coating, ceramics, feeds, cosmetics, pharmacy,ink, cable, electronics, phosphor, catalysts. 1. The product has small particle size, large specific surface area, strong adhesion and hiding power, which can greatly improve the efficacy of the coating. 2. The product has a small proportion and is not easy to form precipitation in the use or final product. 3. The product also has the function of shielding ultraviolet rays, and can play an anti-aging role in the coating.
CAS:1066-33-7 Synonysm:acidammoniumcarbonate;AmmoniumBicarbonate(99.5%min) ,Ammoniumacidcarbonate,Ammoniumhydrogencarbonate;AMMONIUMBICARBONATEPChemicalbookWD;AMMONIUMBICARBONATE,REAGENTAMMONIUMBICARBONATE,REAGENTAMMONIUMBICARBONATE,REAGENT;foodgradeAmmoniumbicarbonateforbakedgoods;ammoniumbicarbonat;Ammoniumbicarbonate,99.995%metalsbasis EINECS:213-911-5 Brand Name:Unilong Place of Origin:Shandong, China Purity:99% Product name:Ammonium bicarbonate Packing:25kgs/drum Delivery:Immediately MF:CH5NO3 MW:79.06 Application 1.Ammonium Bicarbonate (Food Grade) is mainly used as food expansion agent, foaming agent, neutral fertilizer, etc. 2.Ammonium Bicarbonate (Industrial Grade) can be used in pigment, leather, foam rubber, pharmacy, daily chemical industry,electroplating, ceramics, fire extinguishing agent and frosted bulb.
