1. Multi-functional with gas shielded arc welding, MMA welding and self-shielded FCAW available 2. Adopt IGBT as power device, with unique control mode, high reliability. 3. High duty cycle, be able to carry out long-time welding. 4. Closed loop feedback control, workable under network voltage fluctuation within range ± 15%. 5. Adjustable welding voltlage and circuit, excellent welding characteristics. 6. Unique welding control circuit with dynamic characteristics is used in gas shielded arc welding, stable welding arc, little spatter, beautiful shaping, high welding efficiency. 7. Slow wire feeding, high no-load, remove the tip ball after welding, easy arc-starting. 8. In MMA welding, stable welding current, excellent arc starting, be able to use all types of electrode. 9. Great reduction in magnetic loss obviously enhances the welding efficiency and energy saving effect. 10. Stable welding can be realized at the lowest current of 30A when using welding wire with a diameter of 0.6mm. Applicable Materials: Low carbon steel. High tensile steel, ordinary steel. Scope of Aplication: Thin plate welding field such as automobile, motorcycle accessories, Steel-Wood furniture, light steel structure etc. Scope of Aplication: Thin plate welding field such as automobile, motorcycle accessories, Steel-Wood furniture, light steel structure etc. Efficiency (%) 85 Feeding Speed(M/MIN) 2.5-13 Model MIG250 (IGBT) Input power voltage/frequency(V/Hz) AC220¡À 15% (Single Phase, 50/60Hz) Rated input power capacity(KVA) 12.2 Input Current (A) 12.6 Rated Output Current (A) 250 Rated Output Voltage (V) 60 Duty cycle (%) 60 Output current range (A) 30-500 Output current range (V) 15.5-26.5 Insulation Class F Protection class IP23 Type of Wire Feeder Compact Diameter of Spool (mm) 270 Postflow Time (s) 1¡À 0.5 Power Factor(cos¦Õ ) 0.93. Dimensions (mm) 920*295*640 Net weight (Kg) 47.68 Earth Cable (MM2) ¡Ý 2.5 Welding Thickness (mm) Above 0.8 Diameter of Wire (mm) 0.8/1.0 .
Three position rotating plate high frequency welding & cutting machine . Wooden Package.
Four position rotating plate frequency welding & cutting machine. Wooden Package.
Automatic double push plate standard high frequency welding machine. Wooden package.
Model Hr-8kw Power 8kw Voltage Ac380v/410v/400v/440v 50-60hz Frequency 27.12mhz Input power 15kva Rectifier Silicon diode Max pressure 400kgs Gap between electrodes 150mm The moving distance of active horn 100mm Size of upper electrode 100*800mm Size of lowwer electrode 120x800mm Welding time 0~10s adjustable Net weight 530kg Overall dimension 1500*1350*1740mm Character Applied to canvas , advertising, spark protection cloth welding, etc Firmly welding, be well meeting with materials of thick or thin. Machine groove deep and wide, convenient in continuous welding with large area Adopting high sensitive anti-sparkle device , avoid damaging the mould. Adjustable cutting pressure 1-50 ton, stable and realible in output, firm in structure. High quality imported apparatus, the longest welding extended to800*20mm one time European-model squareness high frequency vibration box, more realible and stable in output. 4.138cbm, 550kgs
Model Hr-15kw Power 15kw Voltage Ac380v/410v/400v/440v 50-60hz Frequency 27.12mhz Input power 15kva Rectifier Silicon diode Max pressure 10t/15t Gap between electrodes 100mm The moving distance of active horn 100mm Size of upper electrode 100*1500mm Size of lowwer electrode 120x1500mm Welding time 0~10s adjustable Net weight 580kg Overall dimension 1700*1480*1740mm Character Applied to canvas , advertising, spark protection cloth welding, etc Firmly welding, be well meeting with materials of thick or thin. Machine groove deep and wide, convenient in continuous welding with large area Adopting high sensitive anti-sparkle device , avoid damaging the mould. Adjustable cutting pressure 1-50 ton, stable and realible in output, firm in structure. High quality imported apparatus, the longest welding extended to 1000*20mm one time European-model squareness high frequency vibration box, more realible and stable in output. 5.23cbm 600kgs
Remarks for equipment: The length of worktable( standard): 6000mm, if lengthen in need, 3000mm*n pcs Occupation area for installation( standard): 950íß6000(mm), mean 5.7m2 Net weight: 710kg The weight of mainframe, 310kg, grooved rail+worktable (6m) is 320kg The dimension of mainframe: 1660x980x1010, grooved rail (6m)ú¦3140íß900íß580 The description and parameter: The voltage of mainframe: ac /220v ía10% 50/60hz+ The voltage of regulator: ac 220v ú¿150ví¬í¬260vú¬ 50/60hz Power supply: 3.0kw Oscillation tube: 27.12mhz ía0.6% Cylinder pressure: equal or more 0.2mp Running speed: 2í¬4m/min The width of connection: 10í¬40mm The thickness of connection: 0.5í¬2.5mm Running noise: eual or less 75db Cooling mode: wind cooling Pneumatic pressure: 6 bar The manufacturer has the right to modify the design and parameter without prior notice
Character Two-way automatic slipway , back-forth model continuous automatic feeding, accurate-orientation. Optional operation mode: hydraulic or pneumatic. European-model squareness high prequency vobration box, more realible and stable in output. Adopting high sensitive anti-sparkle device, avoid damaging the mould. Technique specifications Model Hr-15kw Hr-25kw Hr-35kw Hr-50kw Power 15000w 25000w 35000w 50000w Voltage 380v 50/60hz Frequency 13.56mhz Input power 25kva 35kva 50kva 70kva Rectifier Silicon diode Oscillation tube 8t25rb 8t25ra 8t87rb 9t64a Max pressure 1000kg 1000kg 1500kg 2000kg The gap of electrodes 100mm The moving distance of active horn 100mm The size of upper electrode 30í¦ºt48í¦ 30í¦ºt65í¦ 40í¦ºt74í¦ 50í¦ºt85í¦ The size of lowwer electrode 50í¦ºt60í¦ 50í¦ºt70í¦ 50í¦ºt60í¦ 50í¦ºt90í¦ Welding time 0~10s adjustable
Detailed product description Features : 1. Can heat up a metal article almost instantly. 2. Noiseless operation can improve the working environment.Tv and telecommunication Devices would not be interfered. 3. No direct contact with the article is required for instant heating uniformly or restrictively to a certain part of the article. Heat treatment can also be done. 4.Easy adjustment of output power through scr control. 5.Deformation of plastic articles can be minimized as the plastic article is not heated up directly. 6. Pneumatic driven press head for easy operation. 7. Given the water cooling system, the useful life of both the machine and the mould Can be greatly lengthened. Custom made moulds and jigs are available. Usage : It is mostly used in the manufacture of hi-fi and tv speakers, home appliances, toys, Automobile and machinery parts, stationery, cosmetics containers and packagingproducts.It can also be used in heat treatment such as hardening, solderingand brazing.Packing: wooden packaging
Apply high precision Japan spraying nozzle with scanning stroke will be auto-adjustment base on PCB width, ensure the average & accurate flux density coating on the PCB 4200 x 1450 x 1635mm
Apply high precision japan stainless steel spraying nozzle with scanning stroke will be auto-adjustment base on PCB width, ensure the average & accurate flux density coating on the PCB 4200 x 1450 x 1635mm
Model: HFH04 Power supply: ac220v 50hz Temperature range: 180½450 Iron handle: lf90/lf003 Heating element: ht70/90 (ht70 metal heater)
Power consumption: 90w Temperature range: 180-450 centi-degree Heating element: Imported 1321 ceramic heater
My company can suplly a full range of tantalum chip capacitor manufacturing machine! 1.Pellet welding machine 2.Leadframe assembling machine 3.Triming, forming & taping machine 4.Anode mounting machine for surface mount capacitor 5.Automatic inspection machine
High speed taping machine Introduction: 1.3~4p/s. 2.Including product test. 3.Separat ng product. This machine can use in everything smd semiconductor components! if you interesting in it, you can email or call me!
Pellet welding machine My company can suplly a full range of tantalum chip capacitor manufacturing machine! 1.Pellet welding machine 2.Leadframe assembling machine 3.Triming, forming & taping machine 4.Anode mounting machine for surface mount capacitor 5.Automatic inspection machine
Pellet welding machine My company can suplly a full range of tantalum chip capacitor manufacturing machine! 1.Pellet welding machine 2.Leadframe assembling machine 3.Triming, forming & taping machine 4.Anode mounting machine for surface mount capacitor 5.Automatic inspection machine
Rated input voltage AC(V) Three-phase 380 Power source frequency(HZ) 50/60 Rated input capacity(KVA) 11.6 Output empty load voltage(V) 75í+5 Current adjustment scope(A) 20-315 Push current adjustment scope(A) 10-180 Striking arc current adjustment scope(A) 20-120 Rated load duration rate(%) 60 Weight(KGS) 60 Size(mm)(L*W*H) 580*330*530
Rated input voltage AC(V) Three-phase 380 Power source frequency(HZ) 50/60 Rated input capacity(KVA) 11.6 Output empty load voltage(V) 75í+5 Current adjustment scope(A) 20-315 Push current adjustment scope(A) 10-180 Striking arc current adjustment scope(A) 20-120 Rated load duration rate(%) 60 Weight(KGS) 38 Size(mm)(L*W*H) 580*330*530
Reflow/wave soldering machine reflow: Dependable and steady conveying system and effective device. 1. Unique transportation lead rail design, adopts good quality aluminum alloy. The intensity is high, the distortion is small, the precision the high, the parallel degree isf+0.5mm 2. Automatic adding oil system controlled by computer. Adding oil automatically. Adding oil to lubricate conveying chains and central support chains during normal operating time every a period of time. 3. Delayed time output when the power is off. When the city power is not provided with, conveying chains may output continuously PCB board inside the stove, prevent the PCB board from burning. Special nitrogen/rosin recycling cooling filtering system 1. Recycle the weld wasted air forcibly with seal. Recycle and reuse the nitrogen through special big capacity cooling filter system. 2. Huge capacity rosin filter, full seal, keep nitrogen density, no man cleaning. High efficiency nitrogen flux control system 1. Adopt Japanese control valve control nitrogen flux, according to welding density requirement scope to adjust automatically nitrogen flux in the welding section. Reduce nitrogen consumption. Let nitrogen in and let oxygen out quickly, oxygen content in the stove decrease to ppm in 10 minutes. Systematic function 1. Conveyor Speed, Hot wind speed, controlled by the computer. 2. Built-in UPS and power off protection function 3. Various over loading will stop the correspond epuiqment.Built-in UPS and power off protection function 4. Turn off all epuiqment when Emerency Stop is pressed. 5. Conveyor speed close-loop ontvolled accurately 6. Built-in over-temp Alarm function, and display on the screen. 7. Operate "turn off" "delay turn-off" "Reset" "Parameter setting" "profile testing" by the computer. 8. With temp- profile analysis function and saved as Data or Graph files. 9. PID self-tuning control, With f+1fªC accuracy. 10. PID output time-sharing to reduce down the MAX Power. 11. Product amounts counts and display on the screen. 12. With fast sampling rate for 10pcs/sec, thermal-open alarm function. 13. With embedded-in real-time control, system function runs inde pendently, not depending on PC. 14. Board I/O, A/D, power is isolated for EMC Design. 15. PCB current staus for real-time display In the pot. 16. With MYSQL NET data management, easy for ERP/MRPII system integration. 17. SSR failure sensing function, and turn off the system power to prevent from accident. High efficiency advanced carrying wind and heating system 1. Carry the wind independently in each temperature zone. Adopt closed ring PID to control. The temperature control is accurate. The control precision is high. 2. Unique carrying wind mode, the wind force is even, which covers every corner of the stove, the temperature is even, the heat efficiency is high. 3. Carrying wind recycles independently in the temperature section. Heat independently up and down. The firepot temperature is accurate and even. The heat capacity is huge and easy to adjust. 4. Over temperature warp alarm. Over oxygen content and falling down board alarm, malfunction diagnosis, sound & light alarm. 5. The starting power is small, the temperature increases quickly, Temperature increasing time from room temperature to working temperature s less than 20 minutes. 6. Normal use consumption power is small, temperature steady consumption power is 8 KW. 7. Adopt imported electromotion actuator to hoist on the top cover of the furnace body. Safe bar supports and the safety is dependable. 8. Good quality and bearing high temperature motor carry wind. The carrying wind speed is steady, the noise is small, the vibration is small. Features 1. Windows 2000 operation system, the dependability is high, the operation speed is quick, the communication is steady, the management is convenient and may connect with LAN. 2. Chain ,central support and web belt are in-phase which prevent PCB from distorted when heated or the board falling down. 3. Good quality nitrogen protect device, adopt Japanese control valve to control flux, save nitrogen consumption 30%. 4. Cooling temperature control, control effectively cooling decrease. 5. Conveying chains drop oil automatically to lubricate. 6. Alarm record and motion incident record may store, inquiry and trace back conveniently. The longest time to store is one year. 7. Special soldering recycle system make sure soldering quality and keep clean. 8. Heat recycle efficiency is high, starting power is Iow, increase the temperature quickly, the increasing temperature time is less than 20 minutes, the use power is small, thenormal power is only 8 KW. 9. Carrying wind adjust speed without grade, may adjust at random according to PCB board and components feature, which make the best soldering effect. 10. Use big capacity UPS, which keep conveying and micro-computer output when the power is off. 11. Enact at random to open the machine, close the machine time automatically. Full automation and half automation switch, realize the automation without man operation. 12. Each temperature zone control the temperature independently. Adopt the closed ring PID control mode, control precision is high. Mode CY-821(N) Figure size L4800 f+W1345f+A1437 Weight 1700kg Power supply 3PH AC380V 50 / 60HZ Starting power/starting power 40KW / 8KW PCB biggest width 450mm Conveyor effective height f+30mm Conveyor speed 0~1800mm / min Adjust width mode adjust the width with electromotion Chains lubrication drop oil automatically Conveyor direction left-right (right-left), may choose Conveyor mode chains+web belt or chains+central support Furnace body open and closed mode Hoisting with self-lock and electromotion Temperature control section 18 Temperature control scope Cnormal temperature-300fª Temperature control mode closed ring control Temperature collect precision 0.1fªC Temperature collect precision f+1fªC PCB horizontal warp f+2fªC Cooling mode cooling wind recycles to be cooled Carrying wind speed control 0~2800r/min adjust the speed without grade Abnormal alarm Flame couple is abnormal, overemperaturre, fallinging down board, over oxygen content in nitrogen. Parameter store store many parameters Incident record store for one year Temperature increasing time f-20min Nitrogen consumption 20m3 / h Protection when the power is off Delaying time for output Operation system Windows2000 Temperature curve test Produced related parameter automatically wave: Features 1. Lead-free process, environment protection design. 2. Adopts irregular internal furnace and open streamlining appearance. 3. Specially made aluminum alloy sideway, with high strength and high hardness. 4. Automatic synchorous plate connecting device, stable and smooth plate connection. 5. Superior titanium claw type chain, with high elasticity, no easy of distortion, corrsion resistant. 6. Closed constant pressure flux spray system, ensures the stability of spray pressure. Flux automatic follow-up system: continuous reciprocal type spray is adopted, spray area, time are automatically regulated with the width of PCB board and speed change. 8. Equipped with double-layer waste gas filter board for rosin, effectively reduce pollution 9. Preheating device: powerful hot wind system, sent hot wind evenly to the bottom of PCB board. Direct draw-out modular design is adopted, convenient for cleaning. 10.Preheat compensation function, temperature drop by f-2fªC before PCB board enter tin oven. 11. Spray current wave crest: spiral spray design, weld the shaded part of SMT components perfectly. 12. Precise current wave crest: advanced plane current technology, very little tin oxide, the laminar flow wave makes tin point Approach perfection. 13. Double waves of tin oven adopt stepless frequency change, control height of wave crest independently. 14. Automatic claw cleaning device: inported superior micro-water pump, detergent is propylene, clean chain claw automatically. 15.Chilling system: cold wind is -10fªC, PCB temperature fall, with cold wind for -8fªC/sec, without cold wind -3fªC/sec. 16. Economical running: tin wave lift up and go down with PCB board, daily tin oxide can reduce max 30%. 17. Automatic darm function of dramatic temperature change, PCB board tracks and counts automatically. 18. The machine above , following is controlled , There are certain stabilities
