The flame retardant cotton paper double-sided adhesive tape is made of high tensile white flame retardant cotton paper as the substrate, coated with environmentally friendly flame retardant acrylic adhesive on both sides, and isolated with blank double-sided release paper; Good flame retardant effect, balanced adhesion and holding force, excellent weather resistance, and wide application range. Thickness: 110 ± 5 m Specification: 1020mm * 50m/100m, or according to customer requirements Application: The application of adhesive and fixed flame retardant materials in industries such as electronics and electrical appliances, such as batteries, sound-absorbing foam, film switches, Mylar sheets, etc. Testing methods for typical test values of inspection project units Suggestions for storage, transportation, and use: Store in a dry and clean warehouse with a temperature of 5 -30 and a storage period of one year. Avoid mixing and transporting with organic solvents and sharp objects, and do not roll or throw them. Based on the properties of pressure sensitive adhesive tape, we sincerely recommend: 1) The recommended usage conditions for adhesive tapes are 20-35 and 30-60% RH;
PRODUCT INTRODUCTION: 1.color:blue,grey 2.thickness:0.1 0.5 mm 3.work temperature:-40 260 4.thermal conductivity1.0 W/m.k 5.volume resistivity:1.5 10 12 .CM 6.specific gravity:1.79 1.81 g/cm3 7.breakdown voltage: 4 KV CHARACTERISTIC: 1.excellent resistance to heat (dry air), at +260 continuous and 260 intermittent.Remains flexible at low temperatures of 40 2.resistant to ultra-violet light, ozone and weathering processing,pharma ceutical and cosmetic manufacturing area. 3.good electrical insulation properties 4.keep constant even at high temperatures. 5.resistance to chemicals; moderate resistance to general chemical products. 6.high Temperature Thin Transparent.
Adhesive :Silicone Adhesive Side: Double Sided Adhesive Type: Water Activated Material: PE, Synthetic resin Feature: Waterproof Use: MASKING Product name:Nano suction tape Size: Customed Length:1M, 3 Meter, 5M or be custom Width:30mm,50mm or be custom Thickness:2mm Color:Transparent or be custom Certificates:CE,ROSH etc MOQ:300 Rolls
Main product: bopp packing tape, stationery tape, stretch film, gummed Kraft paper tape, masking tape, double sided tape, PVC electrical tape, duct tape, warning tape, filament tape, aluminum tape.
Bopp packing tape, masking tape, gummed kraft tape, double-sided tape, embroider tape, foam rubber tape, cloth tape, tearable tape, writing kraft tape, zebra board tape, printed tape, stationery tape, shrink packing membrane, pe protective membrane, polypropylene plastic, etc..
Feature *Brand: Dowell *Adhesive Type:single sided *Adhesion:strong adhesion *180 Peel strength:3N/25mm *Roll length:50meter *Design: blue Color *Advantage:tear resistance is not easy to break
Shenhen Dowell Adhesive Products .,Lld Characteristic:High temperature resistance, solvent resistance, and no residual adhesive, Excellent resistance to chemicals, chemicals and moisture resistance etc. Feature 1.Available in variety of colors. 2.Sorting and packaging efficiently in production control. 3.Adds aesthetic look to your package Application Suitable for automobile, iron or plastic parts furniture surface high temperature paint protection, but also suitable for electronics, electrical appliances, varistors, circuit boards and other industries
Product features 1, good thermal stability, can work at 180 for a long time, short time can withstand 260 high temperature. 2, soft tear resistance, strong adhesion, not easy to deformation, suitable for all kinds of profiles surface paste protection. 3. There is no glue residue. When tearing the adhesive tape after curing at high temperature for a long time, no glue residue is left. 4, high mechanical strength, suitable for the coil wrapped tightly and firmly. 5,High moisture resistance and insulation.
Product introduction: Polyimide(PI)High temperature adhesive tape uses polyimide film as the base material ,which is coated with high temperature silicone glue.It has the characteristics of high temperature resistance, corrosion resistance, high adhesion, soft and fit, and no residual adhesive.Temperature resistance is usually between 120 and320 degrees.
Polyimide consisting of a polyimide film and silicone adhesive designed for high temperature masking applications, including the protection of gold edge fingers and edge connectors during wave soldering and reflow soldering processes within the PCB assembly industry. It is used in electrical insulation application meeting class H requirements. Main Features: . Thin and conformable enabling masking of uneven sufaces. . Wide operaturing tempreture range up to 500��F. . Excellent electrical insulation . Remove clearly without adhesive residue after exposure to heat/chemical Applications: . Masking for protection of gold fingers and edge connectors during wave soldering and reflow soldering processes or solder dip process within the PCB assembly industry. . Release surface in fabrication of parts cured at elevated temperatures. . Widely used for electrical insulation on transformer, motor, coil, PCB masking and so on. PE film and Paper carton sizes.
This tape is with a courier of PET film , coating silicone adhesive on one side of it. The tape can be used to protect the surface during powder spraying and curing process in industry. Due to an excellent feature of silicone adhesive, it will leave no residue on surface after peeling away. Backing Film Thickness: 0.050,0.002 mm Total Thickness: 0.080,0.002mm Tensile Strength: 160N/25mm Elongation: 70% Adhesion to Stainsteel: 8.50N/25mm Operating Temperature: 180 30Mins no residue. Maximum width: 980mm Minimum width: 3mm Standard roll length: 33m, 50m, 66m.
Very soft copper foil backing and a unique electrically conductive pressure-sensitive acrylic adhesive. ? Conductive acrylic adhesive ? Supplied on a removable liner for easy handling and diecutting. Copper tape is typically used for applications requiring excellent electrical conductivity from the application substrate through the adhesive to the foil backing. Common uses include grounding and EMI shielding in equipment, components, shielded rooms, etc. The copper foil backing is solderable and resists oxidation and discoloration. For Copper Tape, typical shielding effectiveness (far field) is in the range of 60dB to 80dB (30 MHz to 1 GHz). 50m per roll.
Name Custom logo printed RFID UHF Card Materials PVC, PET, PETG, TESLIN, ABS... Size CR80, 85.6*54mm, thickness: 0.80mm or be advised Craft Heating laminating Type Passive Frequency 860~960mhz or be adjusted depends on different zone Application Access control, payment and so on.
(1)available thickness: min.: 38micron max.: 65micron (2)available width: min.: 12mm max.: 72mm (3)length: min.: 30yards max.1000metres (4)available color : transparent, dark brown(5k), brown(3k)(2k), yellow(0k), super clear, coloured (5)diameter of inner paper core: 38mm, 76mm Packing: 6rolls/shrink, 72rolls/ctn
(1)available thickness: min.: 38micron max.: 65micron (2)available width: min.: 12mm max.: 72mm (3)length: min.: 30yards max.1000metres (4)available color : transparent, dark brown(5k), brown(3k)(2k), yellow(0k), super clear, coloured (5)diameter of inner paper core: 38mm, 76mm (6)remarks: 1)packing: 6rolls/shrink, 72rolls/ctn 2)delivery lead time: 45days after receipt of the order from buyer 3)moq: 1x20fcl container. 4)terms of payment: t/t(30%deposit, and the balance before delivery) 6roll/shrink, 72rolls/carton
(1)available thickess: min.: 35micron max.:50micron (2)available width: 12mm, 15mm, 16mm, 18mm, 19mm, 24mm(1" plastic core) 12mm-60mm(3" paper core) (3)length: min.: 3yards max.: 70metres (4)available color :transparent, yellow, golden, brown, crystal clear, colored (5)remarks: 1)packing: 12rolls/shrink, 720rolls/ctn 2)delivery lead time: 45days after receipt of the order from buyer 3)moq: 1x20fcl container. 4)terms of payment: t/t(30%deposit, and the balance before delivery) 12rolls/shrink, 720rolls/carton
1.Thickness: min.:110micron max.:155micron 2.Width: min.: 12mm max.: 72mm 3.Lenth: min.:20yards max.: 1500meters 4.Diameter of inner paper core: 76mm (3" paper core) 5.Color:ivory white, light white, brown, deep yellow, light yellow, colored 6.Packing: vertical shrink, flat shrink, individual in polybag, blister pack Remarks: 1)moq:1x20fcl container. 2)terms of payment:t/t(30%deposit, and the balance before delivery) 3)delivery lead time:45days after receipt of the order from buyer 6rolls/shrink, 72rolls/carton
1.Available thickness: min.:130micron max.:200micron 2.Available width: min.:14mm max.:50mm 3.Available diameter of inner paper core: 32mm, 38mm, 42mm, 50mm, 76mm 4.Length: min.: 3yards max.:50metres 5.Available color: balck, blue, green, grey, red, white, yellow 6.Packing:1roll/wrapper, 10rolls/shrink, 200rolls/ctn Remarks: 1)moq:1x20fcl container. 2)terms of payment:t/t(30%deposit, and the balance before delivery) 3)delivery lead time:45days after receipt of the order from buyer 1roll/wrapper, 10rolls/shrink, 200rolls/ctn
Excellent adhesion and shear properties Resistance to cold, heat and aging Uv stabilised - won't lift off cartons High mechanical strength and good impact resistance Ideal for use in dispensers. Cardboard boxes with 36 or 72 rolls Possibility to personalize the boxes with printing
Features:good adhesion and excellent holding power. Compared to flat back belting tape, sy323 holds superirity in price. It coats with colored kraft-liner tape and applies to the field of diode. Applications: masking tape coated with colored kraft-liner which can be applied to the field of diode and semiconductor.
