Fc to fc high power laser patch cord, coated optical fibers .Manufacturing
Selling optical fiber Performance indexes : Insertion loss0.1db Return loss Interchangeability Repeatability0.1db Plugging times Operating wavelength Operating temperature Storage temperature Features: Standards of iec, bell core Upc end-face finishing High return loss and low insertion loss High reliability and stability Applications: Fiber optic communication system Fiber optic catv Fiber optic test and measurement equipment Fiber optic backbone International standard packing
Fiber optic Description 1.Special two-layer tube technology for good flexibility and bend-resistant property. 2.Water-blocking compound filled up and all cross section double water-blocking. 3.Non-metal structure good electromegnectism resistant property, suitable for electric field and some areas where thunders usually happen. 4.Aramid yarn ensures the tensile strength performance. 5.Excellent water-proof layer, good moisture resistance. Application 1, suitable for both indoor and outdoor 2, long distance communication system 3, local area network system 4, subsiber network system Negotiate
The PMI is built based on PM collimator and Faraday isolator core with All-glass technique sealed process, which makes the isolator has very high stability and reliability.
Textile Fiber&Rubber&Plastic Industries
Textile Fibers Chemical Raw Material
Scunoe is a professional fiber optical components manufacturer in China. which is offering a best quality range of Fiber Optic patch cord . Features: UPC?APC?Simplex / Duplex Types: SC FC ST LC MTRJ E2000 MU MPO etc Polishing : UPC , APC Single Mode , Multi Mode , OM3(10G) The dia of cable : 0.9mm, 2.0mm, 3.0mm Multiple option of Optic Cable Core,Simplex,Twin cores,4 Cores,6 Cores,12 Cores,24 Cores, 48 Cores Return Loss:=50dB(UPC/PC)=65dB(APC) Insertion Loss : Single mode:PC=0.3dB, UPC=0.2dB, APC=0.2dB, MTRJ=0.5dB; Multi-mode:PC=0.3dB, Repeatability:=0.2dB Frequency of Usage:=1000Times
Patch cord, used for linking equipment and components in fiber optic network Features: Single, multiple mode, simplex and duplex fiber patch cords are available Used for linking equipment and components in fiber optic network Fan-out cable
1.Gyts fiber optic cable. 2.Application:aerial, duct. 3.Long-distance communication, lan etc. 4.Armored steel tape. 1/2/3 km per a wooden drum
Telecommunications long-distance optical transmission
Cable type G.652d/g657a, pvc, lszh, simplex or duplex, 0.9, 2.0, 3.0mm Fiber type Smf-28e, sm 9/125um, mm 50&62.5/125um Polish method Upc, pc, spc, apc Connector Fc, sc, lc, st, e2000, din, d4, sma, fddi, mpo/mtp Insertion loss 0.1db (for single mode master) 0.25db (for single mode standard) 0.25db (for multimode) Return loss (for single mode) Upc 50db Spc 55db Apc 60db (typ.65db) Repeatability ¡¨¤0.1db Operating temperature -40 c to 85 ¡ãc Geometry requirement (for single mode) Ferrule end face radius7mm r 12mm (for apc) 10mm r 25mm (for standard) Apex offset 30 |¨¬m (for master) Apex offset 50 |¨¬m (for standard) Undercut -50nm u 50nm 1pc/plastic bag, 1500pcs/carton box
Fiber patch cord Fiber optic accessories.
Fiber optic patch cord Applications 1. CATV 2. Metro 3. Test equipment 4. Active device termination 5. Local area networks (lans) 6. Premise installations 7. Telecommunication networks 8. Data processing networks 9. Wide area networks (wans) Features 1. Low insertion loss and high reflection loss 2. Good durability 3. Compliant standard: IEC & ROHS 4. Good exchangeability 5. High temperature stability 6. Customization, I. E.: print company name on the connector and adapter. 200 piece per carton, 0.0587 cbm per carton 12kg per carton.
Production The td1827 optical fiber identifier is a low cost. Portable instrument designed to detect optical signals without disrupting traffic. During maintenance, installations, rerouting or restorations, its often necessary to isolate a specific fiber. By inserting the fiber into its adapter head, it can identify sm optical fibers without any damage by detecting the optical signals being transmitted through them so as to avoid the opening of the fiber at the spice point for identification, and thus avoids the interruption of the service .In the presence of traffic, the intermittently audible tone is activated. The td1827 optical fiber identifier also aows relative core power display and identification of the 270hz, 1khz and 2khz frequencies. When they are used to detect the frequency, the continuously audible tone is activated. There are four types of adapter heads available: 0.25, 0.9, 2.0 and 3.0. The td1827 optical fiber identifier is powered by a 9v alkaline battery. Efficiently identifies the traffic direction and frequency tone (270hz, 1khz, 2khz) without any damage of the fibers. Displays the core power of the fibers (-50~+0dbm) Low bending loss and highly efficient output Easy-to-replace adaptors (0.25, 0.9, 2.0, 3.0 to match various optical cables) Mechanical damp design of adapter heads to ensure the fiber without damage. Operation design, easy-to-sue Application maintenance in telecom maintenance catv test lab of optical fibers
FC/PC-FC/PC-SM-SX-3.0mm-3m. Plastic Packing.
Terminated with SC, FC, ST, LC, MU, E2000, MTRJ, MPO connectors. Features: Low insertion loss: -SC/FC/ST/LC/MU/E2000: SM
Low loss, low dispersion, unique fiber spare length control and advanced cabling technology make the cable has excellent mechanical and environmental properties. Optical fiber ribbon enlarged the cable capacitance and improved fusion efficiency. Steel-plastic composite sheath has excellent moisture, resistant performance; PE bag
Fiber optic splitters and couplers are used to split or combine optical signals in various kinds of networks Common applications of splitters and coupler are: system monitoring, fiber to the home, network redundancy, laser splitting Features: Single and multiples mode are available Industry standard and custom housing available Variety of connectors available 1 x 2, 1 x 4 and 1 x n custom couplers configurations available Low insertion loss Environmentally stable Specifications: Operation wavelength: 850nm or 1,310nm or 1,550nm, others on request Thermal stability: í_0.1dB over -10 to 85íµ Operating temperature: -10 to 85íµ/-20 to 70íµ/-20 to 70íµ Applications: Optical communication system Optical testing system Optical fiber sensor Optical power distributor
Feather: Low insertion loss High return loss High stability and reliability Customer design available Applications: Collimator Splitter Awg Wdm Isolator Active device As per customers' requirement
Optic fiber adapter - LC are all plastic housing; There are simplex LC adapter and duplex LC adapter, usually duplex LC fiber adapter are with SC footprint. The LC fiber adapter colors are same as SC fiber optic adapter: Blue for single mode PC, beige for multi mode PC and green for single mode APC. LC fiber optic adapter are with bronze sleeve for multimode and zircon sleeve for single mode. Features: 1. Standard metal one-piece body, good interchangeability 2. Precision ceramic sleeve, low insertion loss 1. Applicable standard: YD/T826, YD/T896, IEC61754-13 Applications: 1. Optical fiber communication networks 2. Optical CATV 3. Instruments and meters
