Wireless network card, wireless modem, pcmcia wireless card, wireless pc card, memory flash card, fm transmitter, blue tooth series and skype phone.
Name:Serial to Wifi/Ethernet Converter (RS232/485+RJ45) Model:WF-01 WF-01 is a wireless networking router, which is used for project of RS232/RS485 serial equipment to WIFI or Ethernet networking. WF-01 provides a serial port to WIFI function, can be RS-232/485 converted into a TCP/IP serial network interface, RS-232/485 serial port and WIFI/ Ethernet bidirectional data transparent transmission.The serial device can transfer the data to TCP/IP network interface connect to the network for data communication, communication extended the range to serial device greatly! 1.Can use as a Router; 2.Support Hardware AP, HTTPD Client and WEB IO; 3.Suport TCPB Function; 4. Fast Access WiFi; 5.Support hardware flow control (RTS/CTS) RS232 interface, male mouth(needle) consistent with computer pin definition; 6.RS232 RS485 automatic switching; 7.Support Webpage Configuration; 8.RJ45 network connection, support wired Ethernet transmission; 9.Rich status indicator light: Power/Ready/Link/RXD/TXD; 10. Reload button, do not worry incorrect settings(in working status, press the button 3s then it load to default settings and automatic restart); 11. Design with positioning hole, convenient installation; 12.Highest support baud rate 460800 bps; 13.Optional TCP Server/TCP Client/UDP Client/ UDP Server mode, the TCP Server mode can support up to 32 Client connection; 14.Multiple applications for data transmission from wired to wireless.
Industrial design, stable and reliable, suitable for harsh environment; Support 4, 8 and 16 digital DO outputs, widely used; DO1 supports PWM high-speed pulse output, frequency: 10Hz ~ 300KHz; DO2 can be used to control the direction output of stepper motor and servo motor; 1 RS485 supports Modbus master and slave protocol for expanding IO or HMI; One RJ45 Ethernet interface supports TCP Server and TCP Client services; Support Modbus TCP and MQTT protocols, can access SCADA, MES and cloud platforms; As a TCP server, it can support 5 TCP links at the same time.
1.Wide working voltage, support 9-36V DC power supply, with anti-reverse protection design; 2. Built-in industrial grade ARM CortexTM core, high performance, stable and reliable; 3. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside. 4. 3G/4G/NB-IoT Modules are optional; 5. Modular design, can easily upgrade the cellular module if network upgrade; 6.Support 1 channel relay output for restart the devices; 7.Supports 1 channel RJ45 Ethernet port, built-in isolation transformer, up to 2KV electromagnetic isolation; 8.Up to 10 user's phone number to receive alarm and daily report SMS/Call; 9. Support monitoring power supply status and max. 7 network devices monitoring simultaneously; 10. Built-in TCP/IP protocol stack, support transparent transmission and Modbus RTU to Modbus TCP Protocol; 11.Inbuilt large capacity automatically rechargeable backup battery; 12. Industrial class design suitable for long time work applications; 13. Support configure parameters, load profiles and upgrade the firmware via PC; 14. Wall mount or 35mm standard DIN rail Design, convenient installation, 15. Metallic cover, small size, exterior dimension is L70*W88*H30mm.
1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; 2. Power supply 12~36VDC with over voltage and phase-reversal protection; 3. Supports TCP Server, TCP Client, Modbus TCP, MQTT Protocols; 4. DO1 support PWM output; 5. Management and configuration via LAN connection configuration software for easy operation and maintenance; 6. 8 optical isolated digital input, supports max. 700khz high speed pulse counter; 7. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output; 8. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC; 9. High sampling frequency and special filtering strategy to ensure reliability; 10.1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules; 11.Supports register mapping function and extend I/O inquiry strategy; 12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost; 13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning; 14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
The Dual Simcard Cellular IoT Modbus RTU is design for working in the harsh industrial application environment, converting Modbus TCP/RTU to SMS and cloud platform. widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system, BTS monitoring, remote data acquisition, telemetrically systems, automatically control system. It can be used as a remote switch, remote I/O, remote smart PLC, timer switches. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems.
The PLC Gateway D225 is a converter for converting the data protocol of Mitsubishi PLC into Modbus TCP RTU protocol. The D225 can store the I/O data of the PLC to the gateway through the RS-232 or RS-485 serial port of Mitsubishi PLC. The gateway transmits the data to the cloud platform through the Modbus protocol, and also allows your software to pass through the local area network anywhere. Or Internet access to serial port devices. 1.Built-in industrial grade ARM CortexTM core, high performance, low power consumption, stable and reliable. 2.Converting the data protocol of Mitsubishi PLC into Modbus TCP protocol,then connect to cloud. Support 1 channel RS-232, 1 channel RS-485 and 1 channel TTL. 3.Support 1 channel RJ45 Ethernet port 4.Support RESET button to restore factory function (long press for 3 seconds to recover) to prevent parameter setting error. 5.Using metal shell material, protection grade IP30, metal shell and system safety isolation, especially suitable for industrial control applications. 6.Using configuration software to set device parameters, support WIN XP, WIN 7, WIN 8 and WIN 10, friendly interface. 7.Support static IP address or DHCP to obtain IP address automatically, and query the devices in the network through UDP broadcast protocol. 8.Support local HMI touch screen and remote simultaneous access to PLC for data acquisition and monitoring. 9.Support server domain name resolution. Support firmware upgrade through TTL, firmware update is more convenient.
The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution) or PT100 Resistance Temperature Detector (RTD) inputs, 4 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, 1 Ethernet RJ45 port for connect internet WAN or LAN, supports dual nano sim card, with 2 RS485 serial port, supports 224 mapping registers via Modbus RTU protocol. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.
The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V, 0~10V, 4~20mA, 0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure its reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.
100% CISCO CWDM-SFP10G-1470 COMPATIBLE SFP TRANSCEIVER:Compatible for Cisco CWDM-SFP10G-1470, wavelength: 1470nm, the transmission distance up to 40km. TECHNICAL SPECS: 10Gb/s data rate, duplex LC connector, cable type: SMF, working temperature: -5 ~ +70, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): -15.8. EASY TO USE : Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Always keep the protective dust plug on the SFPâ??s optical bores until you are ready to make a connection. MiniGBIC module with DDM allows you to monitor the critical information, to find out some potential problems. PREMIUM QUALITY: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure the compatibility. Hot-swappable in Cisco routers and switches OUTSTANDING SUPPORT: Backed by QSFPTEK Store for the life of the module itself, not your equipment; our modules won't void your switchs, with access to our tech support
Product Features 4 WDM lanes MUX/DEMUX design 4 WDM channels are 1296, 1300, 1305 and 1309 nm Hot-pluggable CFP2 footprint RoHS compliant and Lead Free Up to 10Km link length Power dissipation
Key Prameter Speed 10GBase-LR Wavelength 1310nm Distance 10km Interface LC Duplex DOM Support YES Media SMF Optical Componets DFB/PIN TX Power -8.2~-0.5dBnm RX Power < -14.4dBm Form Factor SFP+ Protocols MSA Compliant Temperature Range 0 to 70 (32 to 158)
The Cellular IoT Gateway provides 1 ambient sensor input for monitoring onsite temperature and humidity,supports dual sim card,with 2 RS485 serial port, supports 320 extend I/O tags via Modbus RTU protocol. It can monitoring and operates the RS485 ports and extend I/O tags by SMS, APP, Web Server, internet.Supports SMS,GPRS,3G,4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution. 1. Can be operated from anywhere, no distance limitation; 2. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside. 3. 3G/4G/NB-IoT Modules are optional; 4. Modular design, can easily upgrade the cellular module if network upgrade; 5. Embedded ARM�® Cortexâ?¢-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with in-built watchdog; 6. Wide range power supply 9~36VDC with over voltage and phase-reversal protection; 7. 1 ambient sensor input for monitoring onsite temperature and humidity; 8. Resend the data while communication failure and alert to users by SMS; 9. Inbuilt TCP/IP protocol stack, supports cloud, APP and web server applications. 10. Supports Modbus TCP protocol, can integrate to SCADA,HMI,DSC directly. 11. 2 RS485 port supports Modbus RTU Master and Slave, can be used to extend I/O ports or meters; 12. Supports SMS Alert when I/O triggered or recovery, and external power lost or recovery; 13. Provides 1 channel 9~36VDC power source output for external device, saving wiring cost; 14. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message. 15. Inbuilt 8G SD card to save up to 100000 historical data and events; 16. Inbuilt large capacity automatically rechargeable backup battery; 17. Industrial class design suitable for long time work applications; 18. using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 19. L70 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
The GSM 3G 4G LTE Environmental Monitoring Alarm is special for remotely monitoring onsite temperature,humidity,power status through wireless GSM/3G/4G Network.When the temperature,humidity, power voltage exceed high threshold or low threshold value,will send SMS alert to upto 10 preset mobile phone immediately,It supports Modbus TCP and Modbus RTU Over TCP,can be integrated to Cloud Platform. 1. Can be operated from anywhere, no distance limitation; 2. No call charges for inquiry. the GSM 3G 4G LTE Environmental Monitoring Alarm,rejects the call from authorized number then return onsite temperature, humidity, and power voltage on the first 'ring'; 3. Multiple applications. (temperature, humidity, power status, solar panel, dc voltage); 4. Up to 10 authorized phone numbers, 5 can be used to receive call or SMS,and 5 can be used to call and SMS while alarm occurrence; 5. One Temperature & Humidity sensor input, measures temperatures from -40-80�°C,0.5�°C accuracy, Relative Humidity from 0-99RH%, accuracy is 3%; 6. External AC Power status monitoring, AC On/OFF will send SMS to authorized phone numbers; 7. Inbuilt MCU monitoring the DC input Voltage value, measure range is 9-24VDC, no need additional sensor to save cost; 8. Timer Reportâ??Can setup every x hours automatically send its status/Value to the authorized numbers; 9. Support remotely read historic data via SMS; 10. Support Modbus TCP and Modbus RTU Over TCP protocol for cloud monitoring; 11. Rechargeable Backup Battery inside can last 8hours; 12. Secure - Using caller ID and password for identification, unknown callers are ignored; 13. Programmable by SMS Commands or APPs with password protection; 14. Based on GSM Network, applied to many applications. 15. Remote Reset via SMS, Remote Reboot via SMS, Automatic Reboot Periodicity.
KPIIOT (King Pigeon Industrial Internet of Things Cloud Platform) is a million-level access industrial IoT cloud platform. The scientific architecture design can quickly and cost-effectively realize the customer's demand for customized cloud platform and meet the customer's customer demand for cloud platform customization.
The GSM 3G 4G LTE Phase Loss Monitoring Alarm is special for remotely monitoring onsite temperature, humidity,AC power, power status through wireless GSM/3G/4G Network. When the 3/Single phase power failure, power voltage or temperature, humidity exceed high threshold or low threshold value, will send SMS alert to upto 10 preset mobile phone immediately. Supports SMS,GPRS,3G,4G Lte Cellular Networks. Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution. 1. Can be operated from anywhere, no distance limitation; 2. No call charges for inquiry. the GSM 3G 4G LTE Phase Loss Monitoring rejects the call from authorized number then return onsite temperature, humidity,AC power status and power voltage on the first 'ring'; 3. Multiple applications. (3/Single phase status, power status, solar panel, dc voltage,temperature, humidity); 4. Up to 10 authorized phone numbers, 5 can be used to receive SMS,and 5 can be used to call and SMS while alarm occurrence; 5. 1 input for Temperature & Humidity,AC power status monitoring; 6. External AC Power status monitoring, AC ON/OFF will send SMS to authorized phone numbers; 7. Inbuilt MCU monitoring the DC input Voltage value, measure range is 0-36VDC, no need additional sensor to save cost; 8. Timer Reportâ??Can setup every x hours automatically send its status/Value to the authorized numbers; 9. Support remotely read historic data via SMS; 10. Support Modbus TCP and Modbus RTU over TCP protocol for cloud monitoring; 11. Rechargeable Backup Battery inside can last 8hours; 12. Secure - Using caller ID and password for identification, unknown callers are ignored; 13. Programmable by SMS Commands or APPs with password protection; 14. Based on GSM/3G/4G Network, applied to many applications. 15. Remote Reset via SMS, Remote Reboot via SMS, Automatic Reboot Periodicity.
High-performance industrial-grade cellular router adopts 32-bit processor, developed based on Linux system, supports GSM/2G/3G/4G/GPRS/EDGE/WCDMA/HSPA+/LTE network, provides high-speed wireless network bandwidth for the device through wireless connection, and has automatic detection of network disconnection, automatic restart of dial-up failure, and scheduled restart to ensure network Stable connection.
Model noï¼?S281 The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.
Model no S266 The S266 GSM GPRS SMS 3G 4G Temperature Monitoring Unit can be used for remote monitoring onsite temperature, once the temperature exceeds the preset value, will send SMS to 10 user numbers to alarm. also, it supports GPRS/3G/4G to transfer data to remote monitoring center,supports modbus tcp,can intergrate to SCADA,KPIIOT Cloud platform directly. Advantages Quad band 850/900/1800/1900Mhz GSM GPRS Module inside; 3G UMTS/HSDPA/4G Modules are optional.; 32 bit MCU, reliable performance with in-built watchdog; Support temperature & humidity monitoring remotely in real-time; Support 8 channel temperature input interface(DS18B20 Temperature sensors); Support 2 relay outputs,7A@125VAC 5A@125VAC 20A@14VDC; High/Low Alert via SMS/Call/GPRS; Supports 1 DNS or IP address as server; Supports Modbus TCP, TCP/IP protocol over GPRS/3G/4G network; Automatically resend the data while communication failure, GPRS failure will alert by SMS text; Supports remotely restart the device, and configure it by SMS commands remotely; Up to 10 user's phone number to receive alarm and daily report SMS/Call; Timer report, interval period 1~65535 seconds, configurable; automatically upload status/Value to the authorized numbers; In-built rechargeable battery, power lost/recover alarm, low maintenance, 247 operation; In-built internal clock, support 11 actions on schedule at pre-set time; Internal 16MB memory, logs more than 200000 records; Wall mount or 35mm standard DIN rail Design, convenient installation, Dimensions 70*88*30mm; Support Android/IOS APP, easily & friendly for use/config. Support remote upgrade the firmware via PC. Can be operated from anywhere, no distance limitation; Secure - Using caller ID and password for identification, unknown callers are ignored;
The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution. Supports 10 user numbers for receiving device daily reports, dropped calls, serial port data overrun, and specific SMS alarm messages triggered abnormally; Built-in powerful timer function, support timing automatic reporting, timing SMS daily report, timing online, timing restart and other functions; Modbus TCP protocol and Modbus RTU protocol are compatible with transparent transmission; Ethernet comes with a transformer isolator, 2KV electromagnetic isolation, and shell isolation protection; Adopt time division multiplexing, multi-channel mounting, less interference, more mounting nodes, can support up to 99 temperature and humidity collection points It can monitor the terminal battery level in real time to ensure that the device data does not drop.
