Data Network WAN:1x100/1000Mbps SFP Port -- P2P active Fiber 1x10/100/1000Mbps Ethernet Port LAN: 4x10/100/1000Mbps Port Static IP address, PPPoE, DHCP PnP: Auto detection-line,upgrade QoS: Destination/Source MAC/IP, Application, DSCP Advanced Routing: Static Route, Policy Route, DNS Proxy, Port Forwarding/Triggering Internal Address Management: DHCP Server, IP and MAC Address Bind, DHCP Relay Networking Protocols: TCP/IP(IPv4/v6), UDP, RTP, SNTP, NAT, DHCP, DNS, DDNS VPN: IPSec, PPTP, L2TP IPTV: IGMP Proxy/Snooping, IPTV Bridge Management Protocol: CLI, SNMPV1/2, TR069, WebStatic WIFI Features IEEE 802.11b/g/n (2.4Ghz) and 801.11 AC (5.8Ghz) Security: WEP, WPA, WPA2, WPA-PSK, WPA2-PSK WIFI Features:WMM, WLAN-LAN Isolation, Multi SSID(X4), AP Isolation Antenna Type: 2R2T WiFi b/g/n and 2R2T WiFi AC Voice Features 2*FXS Port G.711Alaw, G711mulaw, G.723, G.729 SIP T.30/T.38 fax Billing mode: Reverse Polarity Voice Functions: Caller detection and Caller ID; Call waiting, Call transfer, Call forward, abbreviation dial, 3-Way Conference, Do-Not-Disturb Environment Dimension: 204 x 151 x 37mm Net Weight 752g Power Supply: 12V/2A Operation Range: 0 to 40 C, 32 to 113 F Humidity:10-90% non-condensing
Model Number: UIYLPF4012A5T285SF Type: RF Passive Low Pass Filter Place of Origin: Guangdong, China Brand Name: UIY Transfer Function: Low Pass Filter Filter Type: RF Passive VHF Low Pass Filter Pass Band: 5-285MHz Insertion Loss:
LTE LTE CAT4 LTE FDD Downlink: 150Mbps Uplink: 50Mbps LTE TDD Downlink: 130Mbps Uplink: 30Mbps LTE Bands Combo Q1: LTE Band 1/3/7/8/20/38/40/41; 3G Band 1/2/5/8 Q2: LTE Band 1/2/4/7/12/38/40/41; 3G Band 1/2/5/8 Q3: LTE Band 1/2/4/7/28/40; 3G Band 1/2/4/8 Q4: LTE Band 3/7/20/42/43 *The bands could be designed according to the operator bands Data Network Ethernet Port: 4x10/100Mbps Ethernet Port LAN Or 1x10/100Mbps Ethernet Port WAN+3x10/100Mbps Ethernet Port LAN Static IP address, PPPoE, DHCP PnP: Auto detection-line,upgrade QoS: Destination/Source MAC/IP, Application, DSCP Advanced Routing: Static Route, Policy Route, DNS Proxy, Port Forwarding/Triggering Internal Address Management: DHCP Server, IP and MAC Address Bind, DHCP Relay Networking Protocols: TCP/IP(IPv4/v6), UDP, RTP, SNTP, NAT, DHCP, DNS, DDNS . LTE Features: Switch Frequency Band, Multi -APN, Lock/Switch PLMN, Lock Sim Card, SMS VPN: IPSec, PPTP, L2TP, EOIP Management Protocol: CLI, SNMPV1/2, TR069, WebStatic Firewall & Security: IDS&IPS, Block Ping/ICMP/IDENT, IP and MAC Address Bind, SPI Firewall, Port scan restriction WIFI Features IEEE 802.11b/g/n (2.4Ghz) Security: WEP, WPA, WPA2, WPA-PSK, WPA2-PSK WIFI Features:WMM, WLAN-LAN Isolation, Multi SSID(X4), AP Isolation Antenna Type: 2R2T WiFi b/g/n Wifi Speed: WIFI N 300Mbps Voice Features (Optional) 2*FXS Port· G.711Alaw, G711mulaw, G.723, G.729 SIP T.30/T.38 fax Billing mode: Reverse Polarity Voice Functions: Caller detection and Caller ID; Call waiting, Call transfer, Call forward, abbreviation dial, 3-Way Conference, Do-Not-Disturb Environment Dimension: 190 x 125 x 30mm Net Weight 600 g Power Supply: 12V/1A Operation Range: to 40 C, 32 to 11 F Humidity:10-90% non-condensing
LTE Feature LTE CAT4 LTE FDD Downlink: 150Mbps Uplink: 50Mbps LTE TDD Downlink: 130Mbps Uplink: 30Mbps LTE Bands Combo TDD-LTE: B38/39/40/41 FDD-LTE: B1/B2/B3/B4/B5/B7/B8/B20/B28 TD-SCDMA: B34/39 UMTS:B1/B2/B5/B8 GSM Quad-Band *The bands could be designed according to the operator band Hardware Antenna: 4G Main antenna 4G MIMO Rx Diversity antenna WiFi antenna LCD Display: 1.46" 128 128 TFT LED: Monochromatic USB: Micro USB 2.0 High Speed SIM/USIM Card slot and Micro-SD Card slot Button: Power, WPS, Reset Battery Item: Lion battery 2400mAh WIFI Features Frequency Band: 2.4GHz 802.11b/g/n up to 150Mbps Modes supported: 802.11b/g/n User amount: Max to 10 Security modes: Open, WEP, WPA-PSK, WPA2-PSK WPA-WPA2 Hybrid mode (Mixed Mode),TKIP-CCMP Hybrid mode (Mixed Mode) WPS 2.0, Hidden SSID supported Concurrency (FC quality for LE1.0): AP-STA, mSSID (AP-AP) up to 2 SSID's STA-STA communication block/allow between two SSIDs Other: QoS and PS, WMM, WMM-PS/uAPSD, ERP protection, Coexistence, LTE coexistence (static channel selection), Data Switching/Forwarding, Switching of packets amongst clients, Support for forwarding data to and from WAN, VPN Pass-through Environment Normal Operation: 0C to +45C Restricted Operation:-10C to +55C Storage: -20C to +70C Type: Portable hotspot device with LCD(optional) Size(mm):100*63.5*14.6 Weight(g):105g
Interface 1 x 10/100Mbps Ethernet LAN 1 x 10/100Mbps Ethernet LAN/WAN (Optional) 1 x RJ11(Optional) WiFi IEEE 802.11a/b/g/n/ac (a&ac are optional) 1 x Sim Slot 1 x Power Interface 1 x 2400mAh Internal Battery (Optional) LTE LTE CAT4 LTE FDD Downlink: 150Mbps Uplink: 50Mbps LTE TDD Downlink: 130Mbps Uplink: 30Mbps ·LTE Bands Combo Q1: LTE Band 1/3/7/8/20/38/40/41; 3G Band 1/2/5/8 Q2: LTE Band 1/2/4/7/12/38/40/41; 3G Band 1/2/5/8 Q3: LTE Band 1/2/4/7/28/40; 3G Band 1/2/4/8 Q4: LTE Band 3/7/20/42/43 *The bands could be customized according to the operator bands WiFi IEEE 802.11a/b/g/n/ac (a&ac are optional) Security: WEP, WPA, WPA2, WPA-PSK, WPA2-PSK WIFI Features:WMM, WLAN-LAN Isolation, Multi SSID, AP Isolation Antenna: Internal, MIMO 2x2 Max Users: 32 Environmental Dimension: 130 x 132 x 41mm Net Weight 400 g Power Supply: 12V/1A Operation Range: 0 to 40 C, 32 to 113 F Humidity:10-90% non-condensing
Highlights Supports 5G NR(NSA&SA), LTE and WCDMA, 3GPP Rel.15 complied WiFi 6: 2 x 2 MU-MIMO, up to 1200Mbps 5G Downlink/Uplink up to 3Gbps/250Mbps. LTE Cat 20 Downlink/Uplink up to 2Gbps/150Mbps. 5000mAh Removable Battery 2.4-inch Color Touchscreen Display Support one RJ45 Ethernet port Cellular Protocol 3GPP Rel.15, NSA&SA, Sub-6G and LTE Category 20 Chipset Qualcomm SDX55 Frequency 5G:n1/3/5/7/8/20/28/38/40/41/77/78/79 4G: B1/3/5/7/8/18/19/20/26/28/32/34/38/39/40/41/42 3G: B1/3/5/6/8/19 Up to 5X Carrier Aggregation Throughput 5G: Downlink/Uplink up to 3Gbps/250Mbps 4G: Downlink/Uplink up to 2Gbps/150Mbps 3G: Downlink/Uplink up to 42Mbps/5.76Mbps Antenna Internal, 4 x 4 MIMO WiFi Protocol WiFi6, 802.11b/g/n/ac/ax, Frequency Dual-Band, 2.4GHz and 5GHz Max Users 64 Throughput 802.11n: Up tp 300Mbps 802.11ac: Up tp 400Mbps 802.11ax: Up tp 1200Mbps Antenna Internal, 2 x 2 MIMO WiFi SSID Broadcasting/Hide Security: WEP / WPA-PSK / WPA2-PSK, MAC Filter Software Management WEB GUI Network Configuration APN Management / Network Selection / Statistics Security Firewall, VPN Passthrough, DMZ, Port Forwarding, Port Filter, NAT SMS SMS Send/Receive Address DHCP Server, IPv4/IPv6 Dual Stack Environmental Dimension 137mm x 85mm x 23.5mm Weight 400g Battery Removable Lithium-ion, 5000mAh, 6-hour continuous use Display 2.4-inch Color Touchscreen Display Button Power, Reset Interface 1 x USB Port(Type-C) 1 x RJ45 1 x SIM Card Slot(4FF) Temperature -10 -- 50 Humidity 5%-95%, non-condensing
LTE Category 16, 3GPP Release 12 Max DL/UL Rate: LTE-FDD: 900Mbps/150Mbps LTE-TDD: 700Mbps/50Mbps Antenna: Internal and Omni-Directional Up to 5 APNs Multi Bands Combination: DL up to 3CA, 256QAM; UL 2CA, 64QAM DL 4x4 MIMO Band Width FDD: 5MHz, 10MHz, 15MHz, 20MHz TDD: 10MHz, 15MHz, 20MHz Transmission Mode FDD: TM2, TM3, TM4 TDD: TM2, TM3, TM4, TM7, TM8, TM9 Frequency Bands LTE FDD: Band 1/3/7/20/28 LTE TDD: Band 38/40/41/42/43 DL 2x2 MIMO: Band 20/28 DL 4x4 MIMO: Band 1/3/7/38/40/41/42/43 Antenna Antenna Gain:700 MHz - 960 MHz: 1 - 2dBi 1710 MHz - 2690 MHz: 6 - 7dBi 3400 MHz - 3800 MHz: 8 - 9dBi Impedance:50 CA Combinations DL 2CA: 1+1, 1+3, 1+7, 1+20, 1+28, 3+1, 3+3, 3+7, 3+20, 3+28, 7+1, 7+3, 7+7, 7+20, 7+28, 20+1, 20+3, 20+7, 28+3, 28+7 38+38, 40+40, 40+42, 41+41, 41+42, 42+40, 42+42, 43+43 DL 3CA: 1+3+7, 1+3+20, 1+7+20, 3+1+7, 3+1+20, 3+3+1, 3+3+8, 3+3+20, 3+7+20, 7+1+3, 7+1+20, 7+3+20, 20+1+3, 20+1+7, 20+3+7, 28+3+3, 40+40+40, 40+42+42, 41+41+41, 41+41+42, 42+42+42 UL 2CA: 3+3, 7+7, 38+38, 40+40, 41+41, 42+42 Receiver Sensitivity Band 1: 100 dBm@5 MHz, 97 dBm@10 MHz, 95.2 dBm@15 MHz, 94 dBm@20 MHz Band 3: 97 dBm@5 MHz, 94 dBm@10 MHz, 92.2 dBm@15 MHz, and 91 dBm@20 MHz Band 7: 98 dBm@5 MHz, 95 dBm@10 MHz, 93.2 dBm@15 MHz, 92 dBm@20 MHz Band 20: 97 dBm@5 MHz, 94 dBm@10 MHz, 91.2 dBm@15 MHz, and 90 dBm@20 MHz Band 28: 98.5 dBm@5 MHz, 95.5 dBm@10 MHz, 93.7 dBm@15 MHz, and 91 dBm@20 MHz Band 38: 97 dBm@10 MHz, 95.2 dBm@15 MHz, and 94 dBm@20 MHz Band 40: 97 dBm@10 MHz, 95.2 dBm@15 MHz, and 94 dBm@20 MHz Band 41: 95 dBm@10MHz, -93.2 dBm@15MHz,-92 dBm@20 MHz Band 42: 96 dBm@10MHz, -94.2 dBm@15MHz,-93 dBm@20 MHz Band 43: 96 dBm@10MHz, -94.2 dBm@15MHz,-93 dBm@20 MHz Interface 1 x GE PoE LAN 1 x SIM Card Slot(3FF, micro-SIM card) 1 x LED Indicator for Power, System and LTE Signal Strength 1 x Reset Button Built-in Omni-Directional LTE Antennas Certification CE, RoHS, REACH, WEEE Router Functions DHCP Server NAT, DMZ VPN Passthrough IPv4, IPv6, IPv4/v6 Static Route, Policy Route IP Passthrough Firewall URL/Domain Filtering MAC/IP/Port Filtering System log Management: Web, SNMP, TR069 Environmental Size: 125 mm x 240 mm Net Weight: 1450g Power Supply: Non-Standard PoE Ingress Protection: IP65 ESD Protection: Contact±8KV Air±10KV Operation Range: -40 to 55 Humidity: 10%-95%, non-condensing Installation: Pole-Mounted, Wall-Mount
A Cellular Eth Router. It supports 2*100Mbps Ethernet interfaces, 1*RS232/RS485 serial port, LTE network access with Dual SIM slots for the failover, designed for the industrial. The configurable serial port transmits the narrow-band data from the machine, and the Modbus feature supports RTU converts to TCP easily. Hardware Specifications: 2* 10/100Mbps Ethernet ports 2* SIM card slot (backup/failover) 2* 4G antenna 1* FUNC button 1* GPS antenna(optional) 1* 3 standard core power interface 4G/3G/2G access The frequency bands could be customized Dimension: 179mm*135mm*34mm Structure design: the high-duty metal case Power consumption: 24W Input: DC12V/1.5A Operating temperature: -40+85C Operating humidity: 1095%RH Store temperature: -40+85C Installation: desktop, wall-mounted, slideway Key features: Various network protocols: TCP/IP, UDP, HTTP, TELNET, ICMP, DHCP, PPPoE, DNS etc. Port setting: Port Mirroring, Flow Statistics, LAN and WAN Port Setting Multi-WAN Function LTE+SFP Fiber+Ethernet Load Balancing WAN Load Balancing: Bandwidth Occupancy, WAN IP Tracing WAN Bandwidth Percentage Display LAN IP Statistics Detecting Online: ICMP Detecting, ICMP Detecting Static routing and dynamic routing of RIP/OSPF/BGP PWE3, VPLS, L3 VPN QoS: packets priority, traffic policing, traffic shaping,rate-limiting Centralized network management of CLI, WEB and SNMP NAT function ACL function Firewall, packet filtering etc VPN functions: GRE, L2TP VPN, IPSec VPN, EOIP VPN, MPLS VPN etc. (VPN optional, GRE over IPSec, IPsec over L2TP.) 802.1Q VLAN and QinQ Link detective functions such as BFD, DLDP(switch to backup link according to detective result quickly) Log function
G/EPON ONU 1*10/100/1000M and 1*10/100M Ethernet interface with 2.4GHz WIFI
The Dual Simcard Cellular IoT Modbus RTU is design for working in the harsh industrial application environment, converting Modbus TCP/RTU to SMS and cloud platform. widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system, BTS monitoring, remote data acquisition, telemetrically systems, automatically control system. It can be used as a remote switch, remote I/O, remote smart PLC, timer switches. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems.
The PLC Gateway D225 is a converter for converting the data protocol of Mitsubishi PLC into Modbus TCP RTU protocol. The D225 can store the I/O data of the PLC to the gateway through the RS-232 or RS-485 serial port of Mitsubishi PLC. The gateway transmits the data to the cloud platform through the Modbus protocol, and also allows your software to pass through the local area network anywhere. Or Internet access to serial port devices. 1.Built-in industrial grade ARM CortexTM core, high performance, low power consumption, stable and reliable. 2.Converting the data protocol of Mitsubishi PLC into Modbus TCP protocol,then connect to cloud. Support 1 channel RS-232, 1 channel RS-485 and 1 channel TTL. 3.Support 1 channel RJ45 Ethernet port 4.Support RESET button to restore factory function (long press for 3 seconds to recover) to prevent parameter setting error. 5.Using metal shell material, protection grade IP30, metal shell and system safety isolation, especially suitable for industrial control applications. 6.Using configuration software to set device parameters, support WIN XP, WIN 7, WIN 8 and WIN 10, friendly interface. 7.Support static IP address or DHCP to obtain IP address automatically, and query the devices in the network through UDP broadcast protocol. 8.Support local HMI touch screen and remote simultaneous access to PLC for data acquisition and monitoring. 9.Support server domain name resolution. Support firmware upgrade through TTL, firmware update is more convenient.
The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution) or PT100 Resistance Temperature Detector (RTD) inputs, 4 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, 1 Ethernet RJ45 port for connect internet WAN or LAN, supports dual nano sim card, with 2 RS485 serial port, supports 224 mapping registers via Modbus RTU protocol. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.
The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V, 0~10V, 4~20mA, 0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure its reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.
100% CISCO CWDM-SFP10G-1470 COMPATIBLE SFP TRANSCEIVER:Compatible for Cisco CWDM-SFP10G-1470, wavelength: 1470nm, the transmission distance up to 40km. TECHNICAL SPECS: 10Gb/s data rate, duplex LC connector, cable type: SMF, working temperature: -5 ~ +70, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): -15.8. EASY TO USE : Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Always keep the protective dust plug on the SFPâ??s optical bores until you are ready to make a connection. MiniGBIC module with DDM allows you to monitor the critical information, to find out some potential problems. PREMIUM QUALITY: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure the compatibility. Hot-swappable in Cisco routers and switches OUTSTANDING SUPPORT: Backed by QSFPTEK Store for the life of the module itself, not your equipment; our modules won't void your switchs, with access to our tech support
Product Features 4 WDM lanes MUX/DEMUX design 4 WDM channels are 1296, 1300, 1305 and 1309 nm Hot-pluggable CFP2 footprint RoHS compliant and Lead Free Up to 10Km link length Power dissipation
Key Prameter Speed 10GBase-LR Wavelength 1310nm Distance 10km Interface LC Duplex DOM Support YES Media SMF Optical Componets DFB/PIN TX Power -8.2~-0.5dBnm RX Power < -14.4dBm Form Factor SFP+ Protocols MSA Compliant Temperature Range 0 to 70 (32 to 158)
The Cellular IoT Gateway provides 1 ambient sensor input for monitoring onsite temperature and humidity,supports dual sim card,with 2 RS485 serial port, supports 320 extend I/O tags via Modbus RTU protocol. It can monitoring and operates the RS485 ports and extend I/O tags by SMS, APP, Web Server, internet.Supports SMS,GPRS,3G,4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution. 1. Can be operated from anywhere, no distance limitation; 2. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside. 3. 3G/4G/NB-IoT Modules are optional; 4. Modular design, can easily upgrade the cellular module if network upgrade; 5. Embedded ARM�® Cortexâ?¢-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with in-built watchdog; 6. Wide range power supply 9~36VDC with over voltage and phase-reversal protection; 7. 1 ambient sensor input for monitoring onsite temperature and humidity; 8. Resend the data while communication failure and alert to users by SMS; 9. Inbuilt TCP/IP protocol stack, supports cloud, APP and web server applications. 10. Supports Modbus TCP protocol, can integrate to SCADA,HMI,DSC directly. 11. 2 RS485 port supports Modbus RTU Master and Slave, can be used to extend I/O ports or meters; 12. Supports SMS Alert when I/O triggered or recovery, and external power lost or recovery; 13. Provides 1 channel 9~36VDC power source output for external device, saving wiring cost; 14. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message. 15. Inbuilt 8G SD card to save up to 100000 historical data and events; 16. Inbuilt large capacity automatically rechargeable backup battery; 17. Industrial class design suitable for long time work applications; 18. using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 19. L70 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
The GSM 3G 4G LTE Environmental Monitoring Alarm is special for remotely monitoring onsite temperature,humidity,power status through wireless GSM/3G/4G Network.When the temperature,humidity, power voltage exceed high threshold or low threshold value,will send SMS alert to upto 10 preset mobile phone immediately,It supports Modbus TCP and Modbus RTU Over TCP,can be integrated to Cloud Platform. 1. Can be operated from anywhere, no distance limitation; 2. No call charges for inquiry. the GSM 3G 4G LTE Environmental Monitoring Alarm,rejects the call from authorized number then return onsite temperature, humidity, and power voltage on the first 'ring'; 3. Multiple applications. (temperature, humidity, power status, solar panel, dc voltage); 4. Up to 10 authorized phone numbers, 5 can be used to receive call or SMS,and 5 can be used to call and SMS while alarm occurrence; 5. One Temperature & Humidity sensor input, measures temperatures from -40-80�°C,0.5�°C accuracy, Relative Humidity from 0-99RH%, accuracy is 3%; 6. External AC Power status monitoring, AC On/OFF will send SMS to authorized phone numbers; 7. Inbuilt MCU monitoring the DC input Voltage value, measure range is 9-24VDC, no need additional sensor to save cost; 8. Timer Reportâ??Can setup every x hours automatically send its status/Value to the authorized numbers; 9. Support remotely read historic data via SMS; 10. Support Modbus TCP and Modbus RTU Over TCP protocol for cloud monitoring; 11. Rechargeable Backup Battery inside can last 8hours; 12. Secure - Using caller ID and password for identification, unknown callers are ignored; 13. Programmable by SMS Commands or APPs with password protection; 14. Based on GSM Network, applied to many applications. 15. Remote Reset via SMS, Remote Reboot via SMS, Automatic Reboot Periodicity.
KPIIOT (King Pigeon Industrial Internet of Things Cloud Platform) is a million-level access industrial IoT cloud platform. The scientific architecture design can quickly and cost-effectively realize the customer's demand for customized cloud platform and meet the customer's customer demand for cloud platform customization.
The GSM 3G 4G LTE Phase Loss Monitoring Alarm is special for remotely monitoring onsite temperature, humidity,AC power, power status through wireless GSM/3G/4G Network. When the 3/Single phase power failure, power voltage or temperature, humidity exceed high threshold or low threshold value, will send SMS alert to upto 10 preset mobile phone immediately. Supports SMS,GPRS,3G,4G Lte Cellular Networks. Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution. 1. Can be operated from anywhere, no distance limitation; 2. No call charges for inquiry. the GSM 3G 4G LTE Phase Loss Monitoring rejects the call from authorized number then return onsite temperature, humidity,AC power status and power voltage on the first 'ring'; 3. Multiple applications. (3/Single phase status, power status, solar panel, dc voltage,temperature, humidity); 4. Up to 10 authorized phone numbers, 5 can be used to receive SMS,and 5 can be used to call and SMS while alarm occurrence; 5. 1 input for Temperature & Humidity,AC power status monitoring; 6. External AC Power status monitoring, AC ON/OFF will send SMS to authorized phone numbers; 7. Inbuilt MCU monitoring the DC input Voltage value, measure range is 0-36VDC, no need additional sensor to save cost; 8. Timer Reportâ??Can setup every x hours automatically send its status/Value to the authorized numbers; 9. Support remotely read historic data via SMS; 10. Support Modbus TCP and Modbus RTU over TCP protocol for cloud monitoring; 11. Rechargeable Backup Battery inside can last 8hours; 12. Secure - Using caller ID and password for identification, unknown callers are ignored; 13. Programmable by SMS Commands or APPs with password protection; 14. Based on GSM/3G/4G Network, applied to many applications. 15. Remote Reset via SMS, Remote Reboot via SMS, Automatic Reboot Periodicity.
