Name:Serial to Wifi/Ethernet Converter (RS232/485+RJ45) Model:WF-01 WF-01 is a wireless networking router, which is used for project of RS232/RS485 serial equipment to WIFI or Ethernet networking. WF-01 provides a serial port to WIFI function, can be RS-232/485 converted into a TCP/IP serial network interface, RS-232/485 serial port and WIFI/ Ethernet bidirectional data transparent transmission.The serial device can transfer the data to TCP/IP network interface connect to the network for data communication, communication extended the range to serial device greatly! 1.Can use as a Router; 2.Support Hardware AP, HTTPD Client and WEB IO; 3.Suport TCPB Function; 4. Fast Access WiFi; 5.Support hardware flow control (RTS/CTS) RS232 interface, male mouth(needle) consistent with computer pin definition; 6.RS232 RS485 automatic switching; 7.Support Webpage Configuration; 8.RJ45 network connection, support wired Ethernet transmission; 9.Rich status indicator light: Power/Ready/Link/RXD/TXD; 10. Reload button, do not worry incorrect settings(in working status, press the button 3s then it load to default settings and automatic restart); 11. Design with positioning hole, convenient installation; 12.Highest support baud rate 460800 bps; 13.Optional TCP Server/TCP Client/UDP Client/ UDP Server mode, the TCP Server mode can support up to 32 Client connection; 14.Multiple applications for data transmission from wired to wireless.
High-performance industrial-grade cellular router adopts 32-bit processor, developed based on Linux system, supports GSM/2G/3G/4G/GPRS/EDGE/WCDMA/HSPA+/LTE network, provides high-speed wireless network bandwidth for the device through wireless connection, and has automatic detection of network disconnection, automatic restart of dial-up failure, and scheduled restart to ensure network Stable connection.
APPLICATIONS: Techwin Industrial POE (Power over Ethernet) SPD (Surge Protection Device) is specially designed for Ethernet switches. The POE switch will not be damaged by lightning overvoltage, induced overvoltage, and electrostatic discharge. CAT5e and CAT5 compatible IEEE 802.3af803.1at 10/100 Base-T Ethernet protection LAN, FDDI, CDDI, ATM,WLAN PDH, SDH, SPDH Industrial control Industrial POE, With High reliability and high stability Surge protection for power supply system, SPD for low-voltage installations and device.CCTV system. FEATURES: Multi. Protection circuits, Gas-Tube+ TVS technology Dual protection in Common mode and differential mode TVS array technology, low capacitance Multi-Strike Capability Patent technology TECHNICAL PARAMETER Model POE5-48 Power Parameter Working voltage Un 48V Max. continuous operating voltage Uc 60V Nominal discharge current8/20µsIn 5kA Max. discharge current 8/20µsImax 10kA Protection level 8/20µsUp 150V Protection line 4/5, 7/8 Ethernet Parameter Max. continuous operating voltage Uc 5V Limiting voltage (10/700µs) Up Line-Ground â?¤500V Line-Line â?¤20V Nominal discharge current8/20µsIn 3kA Max. discharge current 8/20µsImax 5kA Adapt transmission rate 100Mbps Insertion loss â?¤0.5dB Protection line 1/2, 3/6
HDV-8FE POE+2FE UP-WD is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
HDV-8FE POE+2FE UP-WD is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
HDV-8FE POE+2FE UP-WD is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
HDV-8FE POE+2FE UP-WD is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
HDV-8FE POE+2FE UP-WD is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
HDV-8FE POE+2FE UP-WD is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
Description : HDV-8FE POE+2FE UP-ND is a standard PoE powered Ethernet switch designed and developed by HDV optical communication equipment. It adopts the latest high-speed Ethernet switch chip and ultra-high backplane bandwidth design. It has strong data processing capabilities and improves smooth data transmission performance.Supports 8*10 / 100Mbps Ethernet RJ45 ports with PoE function and 2*10 / 100Mbps Ethernet uplink RJ45 ports, each port supports auto rollover function (Auto MDI / MDIX).Among them, 8 ports with PoE function, all support IEEE 802.3af / at standard PoE power supply, which can be used as a power supply device for Ethernet. The maximum power supply of a single port is 30W and the maximum power of the whole machine is 150W. It can automatically detect and identify the IEEE 802.3af / at standard Powered equipment.Powered by a network cable, it supports 250 meters of long-distance transmission and supports priority mechanism power supply. Support VLAN isolation mode.
Datasheet:http://www.e-lins.com/EN/download/H900-Datasheet-Eng.pdf More details contact: sales9(at) elins. com E-Lins H900 Series Router is the Dual Core CPU Gigabit and powerful high performance of Dual SIM 4G / 3G router designed for critical infrastructure, M2M, IoT and industrial applications; Dual Core CPU 880MHz Frequence; WAN RJ45 * 1 + LAN RJ45 * 4 + DIO + Serial + USB; 802.11n and 802.11AC 2.4GHz + 5GHz Dual band or Tri band WiFi; Industrial, rubust, secure and high reliable built-in 4g modem with 2 sim card slots, fail over and load balance; High data speed via 4G 3G 2G networks MIMO; Secure data transactions with advanced VPN options; Advanced dynamic routing, security and firewall features; Centralized manageable; GNSS GPS tracking optional; Serial port * 2; USB3.0 * 1; DI / DO port * 4; Wide range power input, dual power input;
PRODUCT INTRODUCTION: RPOE switch has intelligent device Power management features solving a major problem of powering the device for internet service provider. This switch can be powered using remote power from customer using specially designed POE injector or any standard POE injector(24v DC,0.75amp).This eliminates the needs of arranging power at building top (ups not require/No need to pay more money to customer or society).This saves lot of money of ISPs and improves uninterrupted service to the customer. PRODUCT FEATURE: REVERSE POE TECHNOLOGY:8 Port 10/100 Reverse POE switch which has latest generation of fast Ethernet reverse POE switching technology. It contains 7*10/100 base T Reverse Poe ports (RPOE),1*10/100 Base date Uplink Port&12V DC out for Powering ONU. Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation. Supports Non-blocking Wire Speed: The switch forwards and receives traffic seamlessly with its Non-blocking wire- speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly. Cascading support: switches can be cascaded for more users per Building (Up to 1 Main+3 switches ) Port base Isolation u/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Date of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Over voltage Protection: Over voltage Protection is provided on each date port to eliminate damage due to connection of higher voltage(Higher than 24V DC. Up to 80V DC). By mistake if user connect more than 24V POE injector then switch will goes on power off mode and will start working again once this high voltage source is removed. Over current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.
1. Overview 1G3F+WIFI+CATV series is designed as HGU(Home Gateway Unit) in deferent FTTH solutions by HDV, The carrier-class FTTH application provides data service access. 1G3F+WIFI+CATV series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT. 1G3F+WIFI+CATV series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X 1G3F+WIFI+CATV series is designed by Realtek chipset 9603C.
40G QSFP+ SR LR ER Transceiver Module XYT-QSFP-40G-SR4 XYT-QSFP-40G-LR4 Cisco XYT-QSFP-40GE-LR4 Compatible 40GBASE-LR4 QSFP+ 1310nm 10km LC DOM OTN OTU3, 40G Ethernet, Infiniband, FiberChannel, SATA/SAS3, MSA Compliant Cisco QSFP-40GE-LR4 is supported on a wide range of Cisco equipment. FS S5850-32S2Q Switch Cisco Nexus 2000 N2K-C2248PQ Cisco Nexus 9000 N9K-X9432C-S Cisco Nexus 9000 N9K-C9372TX-E Cisco Nexus 9000 N9K-C9372PX-E Cisco Nexus 9000 N9K-M6PQ Cisco Nexus 9000 N9K-X9432PQ Cisco Nexus 9000 N9K-C92160YC-X Cisco Nexus 9000 N9K-M12PQ Cisco Nexus 9000 N9K-C9372PX-E Cisco Nexus 9000 N9K-C9372PX Cisco Nexus 9000 N9K-X9564TX (uplinks) Cisco Nexus 3000 N3K-C3016Q Cisco Nexus 9000 N9K-X9736PQ Cisco Nexus 9000 N9K-C9332PQ Cisco Nexus 9000 N9K-X9464PX Cisco Nexus 3000 N3K-C3064T FS S5850-48S6Q Switch Cisco Nexus 6000 N6K-C6004-M12Q Cisco Nexus 3000 N3K-3132Q Cisco Nexus 3000 N3K-3172PQ FS S5850-48S2Q4C Switch Cisco Nexus 9000 N9K-M12PQ Cisco Nexus 9000 N9K-X9636PQ Cisco Nexus 9000 N9K-C9372PX Cisco Nexus 6000 N6004-96Q Cisco Nexus 9000 N9K-C9336PQ Cisco Nexus 3000 N3K-C3064PQ-10GE Cisco Nexus 3000 N3K-C3164Q Cisco Nexus 3000 N3K-C3064-32T Cisco Nexus 9000 N9K-M6PQ-E Cisco Nexus 7000 N7K-F312FQ-25 Cisco A9K-MPA-2X40GE Cisco Nexus 9000 N9K-C93120TX Cisco Nexus 9000 N9K-M6PQ-E Cisco Nexus 5000 N5K-C56128P Cisco Nexus 3000 N3K-3172TQ Cisco Nexus 9000 N9K-C9372TX Cisco Nexus 5000 N55-M4Q Cisco Nexus 9000 N9K-M6PQ-E
25G SR,LR SFP28 optical transceiver with the features of IEEE802.3by, SFF-8472 low consumption and high reliability,suitable for data center,25G Ethernet and fiber channel. ModelRateWavelengthTransmission distanceTransmitter powerReceiver sensitivityInterface XYT-SFP28-LR-10KM25Gb/s1310nm10KM-1.5~2â?¤-13.3Duplex LC XYT-SFP28-ER-40KM25Gb/s1310nm40KM-1.6~6â?¤-19.6Duplex LC XYT-SFP28-BiDiLR-10KM25Gb/s1270nm/1310nm10KM-3~3â?¤-13Duplex LC XYT-SFP28-LWDM-40KM25Gb/sLWDM40KM-1.6~6â?¤-19Duplex LC XYT-SFP28-CWDM-10KM25Gb/sCWDM10KM-1.5~2â?¤-13.3Duplex LC XYT-SFP28-DWDM-10KM25Gb/sDWDM10KM-1.5~2â?¤-13.3Duplex LC
J4858D 1G SFP LC SX 500m OM2 MMF Transceiver J4859D 1G SFP LC LX 10km SMF Transceiver J4860D 1G SFP LC LH 70km SMF Transceiver J4858C X121 1G SFP LC SX Transceiver J4859C X121 1G SFP LC LX 1310nm 10km DOM Transceiver J4860C X121 1G SFP LC LH Transceiver Please do not hesitate to contact me if you have any further questions. Thanks! Helen Newstar Networking Technology Co., Ltd.
PoE Standard:IEEE 802.3af/at,60W class 5 POE PoE Power Supply Type:End-Span & Midspan: Pins3/6,4/5(+), Pin 1/2,7/8(-), 48VDC PoE Output Budget:Port 1~4: max. 60W/port class 5 POE, max. 240W in total PoE Input:n/a PoE/Data Distance: PoE ports: switch able between 100m@100Mbps or 300m@10Mbps Uplink port:100meters RJ-45 Port number:Full duplex 4 x 10/100Mbps + 1 x 10/100m*100Mbps (Uplink) Switching Mode:Layer-2, unmanaged Input Voltage:48VDC (Dual DC inputs via P1J&R78 jack) Power Adapter:Industrial grade, UL-listed, 60W, 90~264VAC to 48VDC,MTBF 711K hrs, P1J DC plug(Optional P.S.:120W/160W/220W with R7B plug Operating Temperature PoE Switch: -40 ° C ~ +75 ° C Power Adapter: -30 ° C ~ +60 ° C Dimensions:135 x 85 x 30 mm (5.3 x 3.3 x 1.18 in.) Gross Weight:0.80 kg (1.76 lbs), Incl. power adapter Housing Color:Gray (other color MOQ 300pcs)
PoE Standard:IEEE 802.3af/at ,60W class 5 POE PoE Power Supply Type:End-Span & Midspan: Pins3/6,4/5(+), Pin 1/2,7/8(-), 48VDC Max. PoE Output Budget on Port 1~8:Port 1~8: max.60W/port class 5 POE, max. 480W in total Max. PoE Output Budget on Uplinks:Port 9: data only PoE/Data Distance - PoE ports ( switchable between 300m@10Mbps or 100m@100Mbps) - Uplink port: 100 meters RJ-45 Port Number:Full duplex 8 x 100/100Mbps )+ 2 x10 /100/1000Mbps (Uplink) Switching Mode:Layer-2, unmanaged Input Voltage:48VDC (Dual DC inputs via two R78 jacks) Power Adapter:Industrial grade, UL-listed, 120W, 90~264VAC to 48VDC, MTBF 400.7K hrs (Optional P.S.:60W/160W,220W with R7B plug) Operating Temperature PoE Switch: -40 ° C ~ +75 ° C Power Adapter: -30 ° C ~ +70 ° C Dimensions:243 x 85 x 30 mm (9.57 x 3.35 x 1.18 in.) Gross Weight:1.20 kg (2.65 lbs) , Incl. power adapter Housing Color:Gray (other color MOQ 300pcs)
PoE Standard:IEEE 802.3af/at, 60W class 5 PoE PoE Power Supply Type:End-Span & Midspan: Pins1/2,4/5(+), Pin 3/6,7/8(-), 48VDC PoE Output Budget:320W in total PoE Port Arrangement:Port 1~16: max. 60W/port class 5 PoE,max.960W in total; Port17~18 (combo uplink): Data only PoE/Data Distance:PoE ports:100m@100Mbps combo uplinks:1m~20km(SFP) RJ-45 Port Number:16 x 10/100Mbps PoE ports, 2 x 10/100/1000 Mbps SFP & RJ-45 combo ports Switching Mode:Layer-2, unmanaged Input Voltage:90~264VAC Built-in Industrial Grade Power Supply (90~264VAC to 48VDC):320W,UL-listed, MTBF 206.5K hrs Operating Temperature: -30 ° C ~ +70 ° C Dimensions:440 x 300 x 44.5 mm (17.32 x 11.81 x 1.75 in.) Gross Weight:4.8 kg (10.58 lbs) Housing Color:Black
GLC-SX-MM GLC-SX-MMD GLC-SX-MM-RGD GLC-LH-SM GLC-LH-SMD GLC-EX-SMD GLC-FE-100FX GLC-FE-100FX-RGD GLC-FE-100LX GLC-FE-100LX-RGD GLC-GE-100FX GLC-FE-T GLC-FE-100EX If you have any questions, please contact with me, I will try my best for you! Best Wishes Helen Newstar Networking Technology Co., Ltd.