High-risk security situations do not leave any margin for error thus requiring intricate security procedures designed to ensure safety and piece of mind. The TM-915 has been created specifically with this in mind. TM-915 mainly used in detecting the close state of door and window, when the door or window opened as unknown reason and the detector will send out specific radio wave to alarm host to achieve remote alarm. 1.Wireless communication with Alarm Host; 2.Rolling code for anti-crack; 3. Super low power consumption; 4.Low voltage alert; 5.Anti High-frequency interference.
RC-915 allows you to operate your Alarm system remotely. Using this controller, you are able to arm and disarm the system remotely when you are outside. It even has a panic button you can use in an emergency. This remote controller is compatible with all Ansee alarm host. 1.Wireless communication with Alarm Hostï¼? 2.SOS Panic Buttonï¼? 3.One-key arming and disarmingï¼? 4.Mute Alarm
Smoke and flames from a fire are easy to see, but a fire that begins in a vacant part of the house or starts in the middle of the night can spread undetected. Once a fire starts, it can grow quickly. So a smart smoke detector is recommended installed to protect your property and family. GD-100 from Ansee is a high stability and low power consumption wireless smoke detector. By adopting optoelectronic processing technology and single-chip micro-processing technology, it has features such as high stability, easy operation, high detection and anti false alarm performance. When smoke enters the detection area, the detector will send out the light and sound alarm signal, and also send the wireless alarm signal to the alarm host. This smoke detector can be widely used in home living area, building, villa, factory building, market, warehouse, office building etc. to make sure the safety. 1.Audible & Visual Alarm; 2.Wireless communication with Alarm Host; 3.Anti High-frequency interference; 4.Intelligent environment analysis to avoid fault alarm; 5.Rolling code for anti-crack; 6.Super low power consumption.
BWR-01A is a fuel gas detector with high stability, used for checking the leakage of fuel gas and increase the safety. It adopts advanced catalytic gas sensor with high stability and sensitivity features. The detector supports microprocessor technology, it can trigger light and sound alarm, and remotely send related gas density value to alarm host by RF. It is suitable for areas where gas leakage may easily occurs. The gas detector can be used standalone, also can work as accessory in smart home application to realize remote alarm. 1.Audible & Visual Alarm; 2.Wireless communication with Alarm Host; 3.Anti High-frequency interference; 4.Automatic Fault Detection Indication; 5.Rolling code for anti-crack; 6.High Reliable Catalytic Gas Sensor.
After connecting with alarm host, KG-100Z is not just a remote switch. Its stand-alone solution can fit well to your smart home by time-switch, energy saving, ease use of electricity. 1.Wireless communication with Alarm Host; 2.Remote control through cellphone; 3.Anti High-frequency interference; 4.Rolling code for anti-crack; 5.Super low power consumption.
WD-01A is a smart curtain controller for modern smart home system. By connecting to Ansee IP Camera wirelessly, it can control opening/closing curtains remotely through cellphone anywhere. WD-01A adopts a motorized chute structure to realize full on/off or stop with just one click. User can check the curtain status in cellphone. Besides, there is manual control function on site.
Ansee K series Smart Light Control Switch replaces a standard light switch in your home and can be controlled remotely with an Android/IOS smart phone or tablet or by touch the switch, which allows you to turn lights on and off from anywhere. Remote control function is available after connecting the switch with AX-360 IP Camera. By working with AX-X03 series alarm host, the switch can turn on light automatically after once receiving alarm signals.
The mini 2 zone panel HS-CK1002 have Master panel and Slave panel. One Master panel can connect 31 Slave panel, and the Master panel could show the fire and fault of all slave panel. The slave panel can only show itself fire and fault. 2. Specifications Item No. HS-CK1002 HS-CK1004 HS-CK1008 HS-CK1016 Zones 2 4 8 16 Sound output 1 1 2 4 AC power 220VAC/50Hz 220VAC/50Hz 220VAC/50Hz 220VAC/50Hz Battery Sealed lead-acid only Total DC24V system power 3.0 amps Max current per NAC 1.25amps Max battery charging capability 18AH Cabinet weight(net/gross) 3.5/4kg w/o battery 6.0/6.6kg w/o battery 6.0/6.6kg w/o battery 6.0/6.6kg w/o battery 3. Features our Style B (Class B) Initiating Device Circuits (IDCs). One Master Panel also has two zones, each zone can connect max.25 conventional detectors. One slave Panel has two zones, each zone can connect max.25 conventional detectors. The Mater panel could show the fire and fault of all slave panel. The slave panel can only show itself fire and fault.
2 wire 9V-28VDC powered conbined Smoke detector and Heat Detector electronic conbined fire alarm HS-FT103 1pc/blister box(103*103*55mm,155g) ;60pcs/carton box They work perfectly with all conventional intelligent fire control panels Advanced MCU Expert Algorithm Software. Easy installation and maintenance Durable sensor head, no need for replacement
HS-SB106 Manual Call Point, Designed for Conventional Fire Alarm Systems and Security Alarm system for reporting fire or emergency condition by pressing its breakable glass. The manual call point can be test by a test key without breaking the glass. 2. Specifications Name 6" Alarm Bell Manual call point Product category 2 wire, Compatible with all existing conventional fire alarm control panel Item No. HS-JL188-6 HS-SB106 Operating voltage DC24V DC24V Alarm current 70mA @ DC24V 30mA @ DC24V Alarm sound intensity Minimum 95dB N/A Dimension Diameter 155mm, height 45mm 88mm*88mm*52mm Weight 650g 172g Features Easy to install bracket Break glass 3. Features a. Available for flush or surface mounting b. Plastic film on glass c. Test key inserted from side d. Open circuit with series resistor e. Suitable for the majority of conventional fire alarm systems
General The manual call points provide a textured finger-hold area that includes Braille text. In addition to PUSH IN and PULL DOWN text, there are arrows indicating how to operate the station, provided for non-English-speaking people. HS-SB106 Manual Call Point, Designed for Fire Alarm Systems and Security Alarm system. Key Specifications/Special Features Available for flush or surface mounting Plastic film on glass Test key inserted from side Open circuit with series resistor Suitable for the majority of conventional fire alarm systems
Features 1.Highly sensitivity. 2.Simple and convenient to use, no adjustment is required. 3.The detection distance will not be changed when the battery voltage drops from 9V to about 7V. 4.Low power consumption, can work for 40 hours continuously. 5.There is automatic and continues alarm when the battery is used up. 6.Switch on/off audio prompt function. 7.With external rechargeable socket hole. 8.Has audio, Light and vibration hand off switch.
1.Six overlapping detection region of the same height of human body. 2.With LED alarm light on columns displaying the accurate position of the targets. 3.Four corresponding infrared transmitters and receivers,no blind area. 4.Sensitivity of every area can be adjusted independently from 0-99,without the interference of scheduled metals. 5.Microprocessor digital control technology,strong anti interference ability. 6.The function of statistics:the number of passengers and alarms can be count. 7.It can be used independently or work together with the same mod(minimum spacing can be up to 40cm),to meet the requirements of the personnel large flow. 8.Password protection function:only the authorized person can operate it. 9.No harm to people, film and magnetic recording materials. 10.Installed conveniently:just put self-made four corner screws fixed door,plug in 220V power supply can be put into use
Model: RTU5025 Name: GSM 3G Gate Opener Access Control The GSM 3G Gate Opener is special for authorized door access, and require turning ON/OFF your equipments remotely with a FREE call from your mobile phone and protect your assets. It supports to open the gate at the specified time. Also, the historical data can be read out via USB port. The RTU5025 supports GPRS communication function, very suitable for remotely monitoring outdoor cabinets and stations of telecom company, traffic origination, power supply company and so on. It can be authorized different repair person or maintains person to open the cabinets or stations at the specified time, saving time to get the keys for the locks and saving cost to repair or replace the locks while the person lost the key. And also can remote monitoring the door is opened or closed, or illegal opened. 1. Quad-band, 3G WCDMA, 3G CDMA, can work in the worldwide GSM and 3G Networks; 2. No call charges. the GPRS-3G Gate Opener rejects the call from authorized number then carries out the turn ON/OFF action on the first 'ring'; 3. Multiple applications. (gates, bollards, barriers, garage doors, shutters and access doors or machines); 4. Add or remove users by SMS Text command or over GPRS Network or USB Port; 5. No need to provide a remote control or keys for different users; 6. Up to 999 authorized phone numbers can be configured at the specified time; 7. Remotely upload the historical data or via USB port, the record capacity is 10000events; 8. 1 Digital inputs for motion sensors or other sensors to protect your door and windows; 9. 1 input special for monitoring door status and automatically armed when door closed; 10. 1 output with relay rating 3A/240VAC for connecting the switch of the door or machines;
Main Functions and Features: 1.The Rotating Turnstile with failure self-checking and alarm functions.so it is convenient operation and maintenance. 2.Can be connected with any control device and receive the output control signal ,can be controlled by external button or remote control. To achieve bi-directional access control. 3.Uni-directional and Bi-directional pass modes for optional. 4.Auto reset function: 5. Anti-crash, revolving door holds tightly without receiving valid open signal. 6.Anti-follow:revolving door rotates 120degree for normal passing and then lock automatically,turnstile door will auto lock and send an alarm if there has trailing. 6. Door opens automatically when power off to meet the fire safety management requirements,door will self-checking and auto reset when power up. 7.LED directional indication:Humanized indicator High brightness indicator, clearly show even in daytime or under sunshine. 8.Anti buffering function: Arm holds tightly after rotating corresponding angle to realize humanized protection .and auto reset when the external force disappears. 9.Anti-reverse function:if there has reverse force, arm will start anti-reverse function automatically and send out alarm till external forces disappear ,then back to normal passing. 10.Memory function:accurate signal memory, continuous to receive many times the legitimate signal, door will automatic reset after the last man passed, greatly improve the speed of passing. 12. Can be linked with multi card-read devices. Turnstiles work on basis of receiving reply switch signal. 13.Adopt optical working principle. Absolutely assure one card for one passing. 14. Normal open and normal close, automatic revolving door can be also controlled via external button. 15.Achieve normal open even power-on condition with external button. Optional functions: 1.Remote control and management via computer management. 2.Passenger counting function.(forward for add/opposite for substract) 3.perosonalized voice prompt function and closer to life. 4.Single passage in one direction;Free passage in one direction;Single passage in each direction;Free passage in both directions; Field of applied: Full height Revolving door have always been used extensively in office blocks, banks, prison universities and public buildings with high safety entrance control. This can be attributed to the fact that they are excellent security solutions designed for handling high volumes of foot traffic on a daily basis. Competitive advantages of CXT Turnstile : Customized design is available,we can accept OEM & ODM. We offer OEM services as follows: 1) Special design to meet your market. 2) Your logo can be use in ordered products.packing box etc. Special discount and protection of our distributors and agents in their area. No scheduled maintenance required Strong technical support both for product design and after-sale service. -
Co (carbon monoxide) is a colorless, odorless and tasteless poisonous gas that can be fatal when inhaled, which is also know as “silent killer.” it is produced when any fuel is incompletely burned because of insufficient oxygen. Wood fires and charcoal grills produce large amounts of co. Malfunctioning heating systems also produce co. It’s highly suggest to install co detectors in place like kitchen, bathroom, living room, car barn. Co-01a from ansee is a co detector that can work standalone or work with alarm host remotely. It adopts lower power consumption microcontroller and high performance electrochemical sensor, with features such as stable, reliable, accuracy, long standby time etc. It can help you protect your home and family from co threats, even when they occur in remote areas of the home or at night when everyone is asleep. The detector will make “di-di-di” sound, and the red led flash fast when alarm occurs, meanwhile the co concentration appears on the lcd. The green led flash 1 times every 30 seconds when it’s under working state. It also has reset and test function. This co detector has low voltage alarm and test function. Press the test button for several seconds, the detector will make alarm sound and the red led will flash fast, meantime the lcd will playback the alarm record circularly with maximum 10 records.
Ch2o(formaldehyde) is a kind of gas which will cause damage to human body. It exists in many products like chemicals, laminate flooring, particle board, household products, glues, permanent press fabrics, paper product coatings, fiberboard, and plywood. It is also widely used as an industrial fungicide, germicide and disinfectant. Jw-100 ch2o detector adopt with high performance electrochemical sensors and sophistic- Ated circuit design, it has features like high stability, excellent anti interference ability. When the indoor ch2o concentration is over the standard, this detector can provide site alarm and remote alarm according to different degrees of ch2o (connect with alarm host).
High-risk security situations do not leave any margin for error thus requiring intricate security procedures designed to ensure safety and piece of mind. The tm-915 has been created specifically with this in mind. Tm-915 mainly used in detecting the close state of door and window, when the door or window opened as unknown reason and the detector will send out specific radio wave to alarm host to achieve remote alarm.
WAFU remote control lock is an anti-theft lock, which is installed indoors and there is no lock outside, it’s locked and unlocked by remote controllers within 10 meters. So there is no keyhole on the door, and the thefts can’t know where is the lock, so it can be the second lock of home, hotel, and office. One product includes a lock body, 4 remote controllers and a piece of installed accessories. Features: 1.Keyhole-free design: the remote control lock is installed indoors, which have good anti-theft effect. 2.Energy-saving design: the power supply of WAFU remote control lock is two AA batteries, which can use for more than 6 months. 3.Super smart system: WAFU remote control lock is used keelog running password which is difficult to crack among thousand of passwords. 4.Humanization design: WAFU remote control lock can connect to the external USB power, which never cut off, and have emergent buttons here. Specification: 1.Model: WF-008 2.Dimension: 96*155*36mm 3.Color: gold/sliver 4.NW: 0.95 kg 5.GW: 1.3kg 6.Operation Range: within 10m 7.Power Supply: 2 common AA batteries/alternating current 8.Input: DC 100-240V, 50/60A 9.Output: AC 5V, 1000mA 10.Operation Temperature: -20-80°C 11.Operation Humidity: 5-60% 12.Remote controllers number: 4 standard, at most can be registered 16. Note: 1.MOQ: 100 pieces. 2.Price: USD 55-70 FOB Shenzhen 3.Sample: It can be supplied, but it need to charge. 4.Supply Capacity: 30000 pcs/month 5.Package: Gift box packing which is 22.2*19.7*5.8cm, and 12pcs per carton, which dimension is 40*38*23.3cm. 6.Delivery: within 3 to 7 days. 7.Payment: Western Union, Paypal, Bank of China; and pay before delivery.
300W High Power VHF UHF NMT CDMA Single Jammer (Waterproof & shockproof design, it is specially customized to accommodate a fully integrated broad band jamming system which provides the ultimate solution for Military and Police convoys or VIP protection. At a Glance 6 modules are controlled separately and also can work simultaneously. Each module with antenna can be used as a single jammer. The pelican case is portable (can be carried like a suitcase). Can be fixed in car and temporary occasion. Frequency band is optional. With excellent heat dispersion. Specification: 6 Bands Walky-talky (VHF): Walky-talky (UHF/300MHz)/135-155MHz Walky-talky (UHF/350MHz)/155-175MHz Walky-talky (UHF/400MHz)/300-350MHz Walky-talky (UHF/450MHz)/350-400MHz Cellular NMT/400-440MHz Cellular CDMA 450/440-480MHz Total Output Power:300W Control:Each bands can work independently Housing Waterproof & shockproof design suitable indoor or outdoor use Size:56*46*27 cm Total System Weight:Approx 60 kg (with omni directional antennaS.) Humidity:Up to 80% Operation Temperature:-20 ...+50 Centigrade degree Antenna Type:6pcs External( 2-3dBi ) omnidirectional ( Standard ) Shielding Range 300 to 500m ( signal strength
