General Information One-Step Beta-Lactam Rapid Test is a competitive immunoassay for the semi-quantitative detection of the presence of Beta-Lactam residue in milk. Specimen: Milk Reading Time : 5-10min
General Information One-Step Nitrofurans Rapid Test are competitive immunoassay for the semi-quantitative detection of the presence of AOZ,AMOZ, AHD, SEM residue in animal tissue. Detection limit:AOZ 1ppb , AMOZ 1ppb , AHD 1ppb , SEM 1ppb Specimen: Animal tissue Reading Time :10-15 min
One Step Troponin Test (Whole blood/Serum/Plasma FOR IN VITRO DIAGNOSTIC USE ONLY SPECIMEN COLLECTION 1. Testing should be performed immediately after the specimens have been collected. Do not leave the specimens at room temperature for prolonged periods. Specimens may be stored at 2-8C for up to 3 days. For long-term storage, specimens should be kept below -20C. 2. Bring specimens to room temperature prior to testing. Frozen specimens must be completely thawed and mixed well prior to testing. Specimens should not be frozen and thawed repeatedly. MATERIALS PROVIDED 1. Test cards individually foil pouched with a desiccant 2. Plastic dropper 3. Package insert MATERIALS REQUIRED BUT NOT PROVIDED 1. Timer/clock 2. Pipette 3. Controls ASSAY PROCEDURE 1. Read package insert carefully before testing. Allow the test devices, whole blood, serum or plasma to equilibrate to room temperature (15-30C) prior to testing. Do not open pouches until ready to perform the assay. 2. Remove the test device from the foil pouch and use it as soon as possible. 3. Place the test device on a clean and level surface. Hold the dropper provided vertically and transfer 3 drops of specimen (100�µl) to the specimen well (S) in the test device. 4. Wait for the red line(s) to appear. The result should be read between 10 to 15 minutes. INTERPRETATION OF RESULTS 1. Positive Two colored lines should be observed in the viewing window. The line in the test region (T) is the probe line; the line in the control region (C) is the control line, which is used to indicate proper performance of the device. The color intensity of the test line may be weaker or stronger than that of the control line. 2. Negative The control line appears in the test window, but the test line is not visible. 3. Invalid No line appears in the control region. Under no circumstances should a positive sample be identified until the control line forms in the viewing area. If the control line does not form, the test result is inconclusive and the assay should be repeated.
One Step Fecal Occult Blood (FOB) Rapid Test Cassette (Feces) Cat. No.: RH0301T INTENDED USE The One-Step Fecal Occult Blood (FOB) Diagnostic Kit is a qualitative detection of human occult blood in feces forself-testing. PRINCIPLE The One-Step Fecal Occult Blood (FOB) Diagnostic Kit is an immunochromatographic sandwich method, which employ two specific monoclonal antibodies to selectively identify hemoglobin in test samples. The result is very specific, and easier to interpret than those of guaiac-based test. The sensitivity is very high with the ability to detect 200ng/ml hemoglobin in feces. In addition, the accuracy of the test is not affected by interfering substances, and dietary restriction is not necessary. STORAGE The kits should be stored at temperature 4-30�°C, the sealed pouch for the duration of the shelf life (24 months). Do the test in 1 hour after open the pouch. WARNING AND PRECAUTIONS 1. For in vitro diagnostic use only. 2. Do not use kit beyond the expiration date. 3. Patient specimens may contain infectious agents and should be handled as though capable of transmitting disease. Wear disposable gloves throughout the specimen collection and assay procedures. 4. The test device should not be reused. REAGENTS AND MATERIALS PROVIDED 1. One pouched cassette with desiccant. 2. One operating Instruction MATERIALS REQUIRED BUT NOT PROVIDED 1. Clock or Timer SPECIMEN COLLECTION AND PREPARATION 1. Collect stool sample by using the sample collection device provided. 2. Unscrew the top of the sample collection device, take out the sample collection stick, and collect the sample by dipping the stick into 3 different places of the stool sample. 3. Put the sample collection stick back in the sample collection device and screw together tightly. 4. If the sample cannot be tested on the day of collection, store the stool sample at 4C. Bring the specimen to room temperature before testing. ASSAY PROCEDURE 1. Remove the test device from foil pouch by tearing along the notch. 2. Specimen collection. Please see also SAMPLE COLLECTION AND PREPARATION 3. Shake the sample collection device several times. 4. Holding the sample collection device upright, carefully unscrew the tip of collection device. 5. Squeeze 2-3 drops of the sample solution on the test sample pad. 6. Read the test results in 5 minutes. INTERPRETATION OF RESULTS Negative: Only one colored band appears on the control region (C). No colored band in the test region (T). Positive: In addition to the control band (C), a distinct colored band also appears in the test region (T). Invalid: If no bands appear, or a test band appears without a control band, the test should be repeated using a new test device.
SUMMARY Bilirubin: This test is based on the coupling of bilirubin with a diazotized dichloroaniline in a strongly acid medium. The colors range from light tan to reddish-brown. Ketone: This test is based on the reaction of acetoacetic acid with sodium nitroprusside in a strongly basic medium. The colors range from beige or buff-pink color for a Negative reading to pink and pink-purple for a Positive reading. Specific Gravity: This test is based on the apparent pKa change of certain pretreated polyelectrolytes in relation to the ionic concentration. In the presence of an indicator, the colors range from dark blue or blue-green in urine of low ionic concentration to green and yellow-green in urine of higher ionic concentration. Blood: This test is based on the pseudoperoxidase action of hemoglobin and erythrocytes which catalyzes the reaction of 3,3, 5, 5-tetramethyl-benzidine and buffered organic peroxide. The resulting colors range from orange to yellow-green and dark green. Very high blood concentration may cause the color development to continue to dark blue. pH: This test is based on the well known double pH indicator method, where bromothymol blue and methyl red give distinguishable colors over the pH range of 5-9. The colors range from red-orange to yellow and yellow-green to blue-green. Protein: This test is based on the protein error-of-indicator principle. At a constant pH, the development of any green color is due to the presence of protein. Colors range from yellow for a �??Negative�?? reaction to yellow-green and green to blue-green for a �??Positive�?? reaction. Urobilinogen: This test is based on a modified Ehrlich reaction in which p-diethylaminobenzaldehyde reacts with urobilinogen in a strongly acid medium. Colors range from light pink to bright magenta. Nitrite: This test depends on the conversion of nitrate to nitrite by the action of Gram-negative bacteria in the urine. The nitrite reacts with p-arsanilic acid to from a diazonium compound in an acid medium. The diazonium compound in turn couples with 1,2,3,4-tetrahydrobenzo(h) quinolin to produce a pink color. Leukocytes: This test is based on the action of esterase present in leukocytes, which catalyzes the hydrolysis of an indoxyl ester derivative. The indoxyl ester liberated reacts with a diazonium salt to produce a beige-pink to purple color. Ascorbic Acid: The composition comprises of a complex chelating agent with a polyvalent metal ion in its higher state and an indicator dye that can reacts with the metal ion in its lower state to produce a color change from blue-green to yellow.
INTENDED USE The Malaria Gold Rapid Test is a lateral flow chromatographic immunoassay for the simultaneous detection and differentiation of antibodies including IgG, IgM and IgA to Plasmodium falciparum (Pf) and vivax, ovale, and malariea (Pv.o.m) in whole blood. This device is intended to be used as a screening test and as an aid in the diagnosis of infection with Plasmodium. Any reactive specimen with the Malaria Gold Rapid Test must be confirmed with alternative testing method(s) and clinical findings. REAGENTS AND MATERIALS PROVIDED 1. Each kit contains 25 test devices, each sealed in a foil pouch with three items inside: a. One cassette device. b. One plastic dropper. c. One desiccant. 2. Sample diluent (1 vial, 5 ml) 3. One package insert (instruction for use). MATERIALS REQUIRED BUT NOT PROVIDED 1. Clock or Timer 2. Lancing device for whole blood test
INTENDED USE The Malaria Rapid Test is a lateral flow chromatographic immunoassay for the simultaneous detection and differentiation of Plasmodium falciparum (Pf) antigen and P. vivax, P. ovale, or P. Malariea antigen in whole blood. This device is intended to be used as a screening test and as an aid in the diagnosis of infection with Plasmodium. Any reactive specimen with the Malaria Rapid Test must be confirmed with alternative testing method(s) and clinical findings. SUMMARY AND EXPLANATION OF THE TEST Malaria is a mosquito-borne, hemolytic, febrile illness that infects over 200 million people and kills more than 1 million people per year. It is caused by four species of Plasmodium: P. falciparum, P. vivax, P.ovale, and P. malariae. These plasmodia all infect and destroy human erythrocytes, producing chills, fever, anemia, and splenomegaly. P. falciparum causes more sever disease than the other plasmodial species and accounts for most malaria deaths. P. falciparum and P. vivax are the most common pathogens, however, there is considerable geographic variation in species distribution1. Traditionally, malaria is diagnosed by the demonstration of the organisms on Giemsa stained smears of peripheral blood, and the different species of plasmodium are distinguished by their appearance in infected erythrocytes1. The technique is capable of accurate and reliable diagnosis, but only when performed by skilled microscopists using defined protocols2, which presents major obstacles for the remote and poor areas of the world. The Malaria Rapid Test is developed for solving these above obstacles. It detects the antibodies generated in serum or plasma in response to the infection of plasmodium. Utilizing the Pf. specific antigen (HRP-II) and pan-malaria antigen (aldolase), the test enables simultaneous detection and differentiation of the infection of P.falciparum and or P. vivax, ovale, and malariae3-5, by untrained or minimally skilled personnel, without laboratory equipment.
PRINCIPLE Progesterone (P4) is a kind of steroid hormone. The concentration change of P4 in milk is one specific characteristic indicating the activities of cow ovary. It plays an important role in the process of maternal reproduction and maintaining pregnancy. Therefore, it can be monitoring cow reproductive activity by detecting the concentration of P4. P4 concentration has different characteristic changes as the cow's stage of reproductive physiology, through to detect the progesterone levels can make an accurate diagnosis of cow in early pregnancy. PRODUCT FEATURES The strip can be used for diagnosis of cow early pregnancy, which is of high accuracy, easy operation, rapid and normal temperature storage, easy to carry, harmless to maternal and fetal safety. THE SCOPE OF USE The test is mainly suitable for dairy and beef cattle early pregnancy diagnosis, as well as to guide timely artificial insemination. THE BEST USE DATE Cow's estrus cycle is 21 days. There are individual differences in 18 to 24 days commonly, it is suggested to perform the test the 18th days after mating. Perform the test once every day for 5 continuous days; even if one negative result appears during the five days, which indicates the cow is not pregnant and P4 is at the lowest level at this moment. In this case, it was suggested to have the dairy cow mated in time; that should improve the conception rate. If positive results show for all 5 days tests, it indicates the cow is in pregnancy, and it should get careful nursing and gestation management. Another test method is to closely observe the cow rutting performance from 18 days after mating, if it was in rutting performance the detection should do immediately; for those that have no heat after mating to do a test on the 24th day. SPECIMEN COLLECTION 1.Milk sample: cleaning teats before take the milk, abandon to the first three milk, then collect milk in the bottle, take 1 ml in the test tube, placed the centrifuge10000 rpm for 10 minutes, in vitro milk sample was divided into three layers, using straws inserted in the underlying absorbing liquid cream and set aside. 2.Saliva: from the mouth collecting saliva for 3 to 5 ml placed the centrifuge 1500-2000 rpm for 5 minutes, take supernatant on standby. 3.The galley proof: from the hair root galley proof according to take 10 mg in the extracting pipe, add 3 ml anhydrous ethanol soak vortex shock 5 minutes after 2-3 hours, placed 3000 rpm centrifuge for 5 minutes, drain on ethanol solution 1 ml into glass dish, in 70-80 �?? oven dry reoccupy after 1 ml PBS dilution. Set aside. 4.Urine: can be used directly. 5.Blood: anticoagulant take 1 to 2 ml of centrifugal 2000 rpm 5-10 minutes from the plasma standby, the anticoagulant let stand for 30 minutes to separate serum blood clots. Set aside.
INTENDED USE The Malaria Rapid Test is a lateral flow chromatographic immunoassay for the simultaneous detection and differentiation of Plasmodium falciparum (Pf) antigen in whole blood. This device is intended to be used as a screening test and as an aid in the diagnosis of infection with Plasmodium. Any reactive specimen with the Malaria Rapid Test must be confirmed with alternative testing method(s) and clinical findings. STORAGE Store the test kits at room temperature 4- 30 degrees C. The sealed pouch has a self life of 24 months.of transmitting disease.
General Information One-Step Ractopamine Rapid Test does not require any equipment for the detection of pig urine,Tissue and Feed Ractopamine residues. Detection limit: 3ppb Specimen: Urine, Tissue ,Feed Reading Time :3-5 min
Home Menopause Test Strip is an in vitro diagnostic (IVD) qualitative test for rapid detection of human Follicle Stimulating Hormone (FSH) in urine at a sensitivity of 25mIU/ml. SUMMARY AND EXPLANATION OF THE TEST Follicle Stimulating Hormone (FSH) is a peptide hormone produced in the pituitary gland of the brain. It is normally present in the blood or urine varying in concentration with the stage of the menstrual cycle. When estrogen levels drop, FSH is released from the pituitary gland indicating that either a woman in mid-menstrual cycle or the onset of perimenopause. During early menopause, changes take place in the balance of hormones that regulate and control menstrual cycles. As a woman grows older and passes out of childbearing stage of life, the ovaries gradually make less of the hormone estrogen and FSH increases.FSH normally regulates the growth and development of an egg. Once this part of the monthly cycle is complete, FSH production is stopped and it returns to normal. As the body decreases estrogen production with age, more FSH is made. Over time these hormone changes cause menstrual periods to stop completely and "menopause" has occurred. The slow change in ovary function can happen between 2 and 10 years before the final period. This early stage before menopause is called perimenopause. During this stage, the levels of FSH may rise to positive levels and slowly return to normal, causing irregular or missed periods. The testing for FSH should be performed twice to help identify the levels of FSH throughout a menstrual cycle. PRECAUTION 1. For in vitro diagnostic use only. 2. Do not use after expiration date. 3. Test device should remain sealed until ready for use. Do not use if pouch is damaged or opened. 4. Read this instruction carefully before performing the test. 5. Do not re-use the test device. 6. Do not eat the desiccant in the pouch.
AMP INTENDED USE The AMP Gold Rapid Screen Test is a qualitative competitive binding immunoassay for determination of Amphetamine in urine. AMP PRINCIPLE The Amp Gold Rapid Screen Test is a chromatographic absorbent device in which drug or drug metabolites in a sample compete with drug antigen immobilized on a porous membrane support for limited antibody sites. Labeled antibody-dye conjugate mixes with sample specimen and binds to the free drug presented in sample forming an antibody-antigen complex. This complex prevents the formation of pink color bands in the test zone immobilized antigen conjugate when the drug is presented in the sample urine above the detection levels (1000ng/ml for Amphetamine). Unbound dye conjugate binds to the reagent in the control zone and produces a pink-rose color band, demonstrating that the reagents and device are functioning correctly. A negative specimen produces two distinct color bands, one for the control in the �¢??C�¢?? zone and one for Amphetamine in the �¢??T�¢?? zone. AMP REAGENTS AND MATERIALS PROVIDED 1. Test Device A pouched cassette contains a single test for Amphetamine 2. Dropper A transfer pipette seal in foil pouch together with test device 3. Operating Instructio MATERIALS REQUIRED BUT NOT PROVIDED AMP MATERIALS REQUIRED BUT NOT PROVIDED Packaging Details: Pouch+Box+Carton packaging (1) With our companyâ??s Logo (2) With the natural package (3) With OEM package (4) ODM Anna Lee Int'l Market Executive
1. The One Step RV IgG/IgM Test can be performed used on Whole Blood /Serum / Plasma. 2. To collect whole blood, serum or plasma specimens following regular clinical laboratory procedures. 3. Testing should be performed immediately after specimen collection. Do not leave the specimens at room temperature for prolonged periods. For long term storage, specimens should be kept below -20â??. Whole blood should be stored at 2-8â?? if the test is to be run within 2 days of collection. Do not freeze whole blood specimens. 4. Bring specimens to room temperature prior to testing. Frozen specimens must be completely thawed and mixed well prior to testing. Specimens should not be frozen and thawed repeatedly. Test Procedure Allow the test, specimen, buffer and/or controls to reach room temperature 15-30â?? (59-86â??) prior to testing. 1. Bring the pouch to room temperature before opening it. Remove the test device from the sealed pouch and use it as soon as possible. 2. Place the test device on a clean and level surface. 3. Hold the dropper vertically and transfer 1 drop of specimen (approximately 10μl) to the specimen well(S) of the test device, then add 2 drops of buffer (approximately 80μl) and start the timer. See illustration below. 4. Wait for the colored line(s) to appear. Read results at 15 minutes. Do not interpret the result after 20 minutes. Interpretation of Results Positive: Control line and at least one test line appear on the membrane. The appearance of T2 test line indicates the presence of RV specific IgG antibodies. The appearance of T1 test line indicates the presence of RV specific IgM antibodies. And if both T1 and T2 line appear, it indicates that the presence of both RV specific IgG and IgM antibodies. The lower the antibody concentration is, the weaker the result line is. Negative: One colored line appears in the control region(C). No apparent colored line appear in the test line region. Invalid: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test with a new test device. If the problem persists, discontinue using the test kit immediately and contact your local distributor.
General Information One-Step TB IgG/IgM Rapid Test is detection antibodies(IgG and IgM) anti-Mycobacterium Tuberculosis(M.TB) in human blood. Sensitivity :86.7% , Specificity : 90% Specimen : Serum, Plasma or Whole Blood Reading Time : 10 min
General information One-step cdv + cpv ag combined rapid test is a combined cassette to diagnose the presence of canine disteimper virus antigen and canine parvovirus antigen in dog’s secretions, serum or feces. Sensitivity : cdv 100% cpv 99.3% Specificity :cdv 99.8% cpv 99.4% Specimen: secretions, serum or feces Reading timen:5-10 min
General information Feline infectious peritonitis virus ag test is a sandwich lateral flow immunochromatographic assay for the qualitative detection of fip-triggerred coronavirus antigen(fcov ag) in cat’s feces, serum and ascites. Assay time: 10 - 15 min Sample: mixture of serum and feces extraction, ascites or secretions
General information Method: double antibodies sandwich method Sensitivity : 100% Specificity : 99.8% Specimen : ocular and nasal secretions, serum, plasma Detection limit: 101.9 tcid50 / 0.1 ml No cross reaction against cpv, ccv, civ, cpiv Reading time : 5- 10 min
General information One-step cow pregnancy rapid test is to improve milk output and shortening the period of non-pregnancy. Analytical sensitivity : 2ng/ml Sensitivity : 96.9% , specificity : 97.8% Specimen : milk Reading time : 5 min No cross-reactivity: fsh (100g/ml), e2(10g/ml), prl(100g/ml), lh(25miu/ml), dht(10g/ml), tetraborane(10g/ml) and h2o.
General information One-step tumor marker rapid test is an immunochromatography based one-step in vitro diagnostics test for the qualitative determination of afp, psa and cea in human serum or plasma. Afp : alpha-feto protein test to detect liver cancer Psa : prostate-specific antigen test to detect prostate cancer Cea : carcinoembryonic antigen test to detect colorectal cancer Specimen : serum or plasma Reading time : 20 min
General Information The Urinalysis Reagent Strips (Urine) are firm plastic strips onto which several separate reagent areas are affixed. The test is for the detection of one or more of the following analytes in urine: Ascorbic acid, Glucose, Bilirubin, Ketone (Acetoacetic acid), Specific Gravity, Blood, pH, Protein, Urobilinogen, Nitrite , Leukocytes and so on.
