Model No. SWT508C SWT508-SD SWT-SDB SWT508-SDB2 Power AC220/ 50HZ Motor Rated 160W Rated 200W Display English/Chinese Cutting Length 1-9999 mm Stripping Length (mm) Wire Head 0-35 Wire Tail 0-15 Wire Head 0-50 Wire Tail 0-30 Cutting Tolerance (0.002xL)mm Middle Stripping 11 sections Cut core cross-section (SQMM) 0.1-2.5 0.1-4.5 Single wire0.1-4.5 Double wires 0.1-2.5 Catheter Max. Diameter 6 Appropriate Wire PVC Wire, Teflon Wire, Glass Wire Blade Material Hard Tungsten Steel Production (piece/hour) 3000-8000 3000-8000 5000-10000 4000-10000 Drive Mode 2 Wheels 4 wheels
Model No. SWT508-MAX SWT508-MAX1 SWT508-MAX2 Power AC220/ 50HZ Motor Rated 500W Rated 800W Rated 1000W Display English/Chinese Cutting Length 1-60000mm 1-100000mm Stripping Length (mm) Wire Head 0-50 Wire Tail 0-50 Wire Head 0-100 Wire Tail 0-100 Wire Head 0-150 Wire Tail 0-150 Cutting Tolerance ± (0.002xL)mm ± (0.001xL)mm Middle Stripping 13sections 16 sections Cut core cross-section 0.2ï½?16mm2 0.3ï½?25mm2 0.3ï½?25mm2 1ï½?70mm2 Catheter Max. Diameter ï¿ 13 ï¿ 18 Appropriate Wire PVC Wire, Teflon Wire, Glass Wire, Multistrand steel wire Blade Material Hard Tungsten Steel Production (piece/hour) 16SQMM2000-3000 25SQMM 3000-4000 4000-5000 5000-6000 Drive Mode 4 wheels 8 wheels 8 wheels independent drive
Model No. SWT508-HT SWT508-HT2 SWT508-BHT SWT508-BHT2 Remark Process round sheathed cable, out diameter
Model No. SWT508-ZW6 (ZW16) Remark Shortest bending distance is 2.5mm. Bending Angle: clockwise or anticlockwise bending at 30/45/60/90 degree. Power AC220/ 50HZ Motor Rated 650W Display English/Chinese Cutting Length 1ï½?100 m Stripping Length (mm) Wire head:0-20 Wire tail:0-20 Cutting Tolerance (0.0001xL)mm Middle Stripping Cut core cross-section 1ï½?6mm2 1ï½?16mm2 Catheter Max. Diameter(mm) 10 Appropriate Wire PVC wire, Teflon wire, Glass wire Blade Material Hard Tungsten Steel Production L=100mm (piece/hour) 2000-3000 Bending Speed Drive Mode 2 Wheels
Model No. SWT508-NX2 Remark Process super short thin wire, shortest length can be twisted is 28-30mm Power AC220/ 50HZ Motor Rated 450W Display English/Chinese Cutting Length 1100000 mm Stripping Length (mm) Wire head:0-35 Wire tail:0-20 Cutting Tolerance(0.0001xL)mm Middle Stripping 16 sections Cut core cross-section Single wire processing: 0.14.5mm2 Double wire processing: 0.12.5mm2 Catheter Max. Diameter(mm) ï¿ 6 Appropriate Wire PVC wire, Teflon wire, Glass wire Blade Material Hard Tungsten Steel Production L=100mm (piece/hour) 4000-10000 Drive Mode 4 Wheels Wire Twist Mode Single-end twist or double-ends twist
This benchtop wire splice machine is specially designed for wire riveting processing, pressing riveting and wire connection. It has replaced the traditional soldering methods to avoid faults of no cold welding, air welding and air pollution. It is widely admitted to be the most simple and effective way. This splice crimping machine to crimp diode and resistor uses special continuous copper strip terminal materials to shape molding after being cut off. Pressing quickly at one time without waste and saving cost. The brass strip terminal is processed by residue lines. Resistance to tension is particularly strong after riveting with stable quality. Straight and curved mold bases can be equipped to connect with various products. User-friendly design, easy to operate. Scope of Application: Neon and resistor connection, LED and wire connections. Resistor and wire connection. Slide switch and wire connection. Connection of high temperature heating elements. Connection of thermosensitive components (such as magnetic spring, constant temperature fuse). Transformer tap and wire connection. Model No.: 1.8T Semi-Automatic Wire Splicing Machine Power supply: AC110V/220V 50Hz Weight: 55 Kg Dimension (mm): 370* 400*500 Power: 1/4HP Stroke: 2000KG Cooper Belt Size: 2mm/4mm/6mm
This Automatic Nylon Tie Cable Strapping Machine is equipped with stepper motors, adopted PLC touch screen to control cable tie length, automatic cut the cable tie and twist it. The winding speed and winding cycle are both adjustable. This machine is widely used to process AC/DC power cord, USB data cable, video cable, HDMI cable, and other types of transmission line. Model No. TQ5-30 TQ 15-45 Applicable Nylon Tie Binding Length 65-140 MM 110-190 MM Binding Diameter 5-30 MM 15-45 MM Binding Speed 1 second per binding Winding Spacing 50-200 MM 50-250 MM Winding Speed 1-10 circles (adjustable) Working Voltage AC220 50/60HZ Power
This scrap cable stripper machine has multiple stripping channels for different wire sizes, you only need to put the wires into a suitable channel, the upper blade and bottom blade will slash open the outside insulation respectively, then the inner copper can be taken out easily. Specifications: Available Cable Size: Dia 1mm-45mm Power Rating: 3000/4000W Power Supply: 110V 220V 380V Daily Output: 100-300kg Measurement: 550x530x830mm Net Weight: 98kg Remark: We also have a customized model for slight gauge cable diameter 0.6MM to 12MM. this model no. is HK-12A.
Features 1 Suitable for LED lamp beads repairing, size of micro LED components not less than 0.6*0.6mm can be repaired 2 Suitable for LED lamp beads of tape packaging and bulk materials, also any BGA and components which are difficult to repair. 3 High solution optical alignment system, accurate LED components positioning, ensure precise mounting. 4 Optical alignment is controlled electrically, can rotate automatically 5 Mounting head built-in pressure testing device, to protect the PCB 6 Built-in infrared laser positioning, fast positioning for PCB. 7 Adopt HIWIN precision guide rail for up and down movement system, ensure reliable and accurate running 8 Adopt up and down alignment for top and bottom heater, heating for appointed local zone, prevent PCB to turn yellow. 9 Bottom heater up and down manually, can adjust the heating height real time. 10 Adopt ceramics infrared radiator for IR heater, heating stably and uniformly with long serve life 11 Human-machine interface has multiple operation mode and permission, welding, and mounting manually, easy operation. 12 High resolution touch screen, which is up to 800*600 pixel 13 Adopt joystick control for alignment system, no need setting complicated parameters 14 Adopt Delta double ball bearing flow fan for air supply¡ê;no need external air source 15 Adopt DCCE 6 channel module for temperature control system, automatic PID adjustment 16 Monitoring heaters real time, when accident happens, relevant sensors will send signal to PLC,which will close output channel and display fault condition. Protect itself automatically. Specifications Total Power Max 5300W Power AC 220V10% 50/60 Hz Top heater power 1200W Bottom heater power 1200W IR power 2700W Hot air temp. 400 230; (Max) Preheating temp. 400 Positioning V-groove +laser positioning + universal fixture PCB size Max 410 370 mm Preheaing size 370mm 270mm Chip type BGA,QGN,CSP,POP,QFN, Micro SMD,LED lamp beads Chip size Max 80¨80mm Min 22 mm Dimensions L640 W630 H900 mm Temperature sensor 1 piece Net weight 70kg Package Wooden box Dimension :80*80*105cm Gross weight: 120kg Delivery time: 3-7 working days
Feature: 1.3 independent heating system ZM-R6200 is available heating portion of the PCB board by hot-air circulate both from top and bottom at the same time. With large IR bottom heating, it can completely avoid PCB deformation during reworking period, you can use software to choose freely or use top heater or bottom heater depart, and combine freely with top and bottom heatercapacity, to make it easies for rework double BGA, CCGA, QFN, CSP, LGA, SMD etc. External sensor socket is precise detected temperature to analyze and proof on actual temperature curve of BGA at the same time. 2.Precise optical alignment system with optical alignment system and clear images, components can enlarge up to Maximum 230 times, mounting accuracy within +/-0.01mm, with a beam split, zoom in, zoom out and micro-adjust functions, adopted 12HD monitor. 3.Multi-function operation system With touch screen interface, k-type thermocouple, close-loop control, and intelligent temperature compensation with automatically system, integrated design of top heater and sucker point. It can auto identify a high degree of suction and mounting. With automatic soldering and desoldering function. the temperature can be set to 6 segment and 6 segment constant temperature control, N groups of storage temperature setting parameters according to kinds of BGA chip set. 4.Superior safety functions After finish desoldering and soldering, there is alarming, when temperature goes out of control, the circuit will automatically power off, it is of double excess temperature protection function. Temperature parameter has a password to avoid arbitrary changes, with superior safe protection functions, can protect PCB, components and the machine from damage at any abnormal situation Specification parameters 1 Total power 5100W Max 2 Top heater power 1200W 1st heater¡ 3 Bottom heater power 1200W 2nd heater 4 3rd IR heater 2700W (independent controlling left and right IR heaters) 5 power AC 220V;¨¤10 50/60Hz 6 Electrical materials temperature control system Adopted Dalian University of Technology 7 Dimensions 640¢630900mm 8 Temperature control K-type thermocouple (Closed Loop), 9 Positioning V type groove;with universal fixture 9 P C B size Max 410 370mm¡; Min65 65mm 10 Available BGA chip 11- 80 80mm 11 External temperature sensor 1piece 12 Net weight 65kg Package Wooden box Dimension :80*80*105cm Gross weight: 120kg Delivery time: 3-7 working days
Features 1 Suitable for LED lamp beads repairing, size of micro LED components not less than 0.6*0.6mm can be repaired 2 Suitable for LED lamp beads of tape packaging and bulk materials, also any BGA and components which are difficult to repair. 3 High solution optical alignment system, accurate LED components positioning, ensure precise mounting. 4 Optical alignment is controlled electrically, can rotate automatically 5 Mounting head built-in pressure testing device, to protect the PCB 6 Built-in infrared laser positioning, fast positioning for PCB. 7 Adopt HIWIN precision guide rail for up and down movement system, ensure reliable and accurate running 8 Adopt up and down alignment for top and bottom heater, heating for appointed local zone, prevent PCB to turn yellow. 9 Bottom heater up and down manually, can adjust the heating height real time. 10 Adopt ceramics infrared radiator for IR heater, heating stably and uniformly with long serve life 11 Human-machine interface has multiple operation mode and permission, welding, and mounting manually, easy operation. 12 High resolution touch screen, which is up to 800*600 pixel 13 Adopt joystick control for alignment system, no need setting complicated parameters 14 Adopt Delta double ball bearing flow fan for air supply no need external air source 15 Adopt DCCE 6 channel module for temperature control system, automatic PID adjustment 16 Monitoring heaters real time, when accident happens, relevant sensors will send signal to PLC,which will close output channel and display fault condition. Protect itself automatically. Specifications Total Power Max 5300W Power AC 220V10% 50/60 Hz Top heater power 1200W Bottom heater power 1200W IR power 2700W Hot air temp. 400(Max) Preheating temp. 400Max Positioning V-groove +laser positioning + universal fixture PCB size Max 410 ,370 mm Preheaing size 370mm,270mm Chip type BGA,QGN,CSP,POP,QFN, Micro SMD,LED lamp beads Chip size Max 80,80mm Min 22 mm Dimensions L640 W630 ,H900 mm Temperature sensor 1 piece Net weight 70kg Package Wooden box Dimension :80*80*105cm Gross weight: 120kg Delivery time: 3-7 working days
Feature: 1.3 independent heating system ZM-R6200 is available heating portion of the PCB board by hot-air circulate both from top and bottom at the same time. With large IR bottom heating, it can completely avoid PCB deformation during reworking period, you can use software to choose freely or use top heater or bottom heater depart, and combine freely with top and bottom heatercapacity, to make it easies for rework double BGA, CCGA, QFN, CSP, LGA, SMD etc. External sensor socket is precise detected temperature to analyze and proof on actual temperature curve of BGA at the same time. 2.Precise optical alignment system with optical alignment system and clear images, components can enlarge up to Maximum 230 times, mounting accuracy within +/-0.01mm, with a beam split, zoom in, zoom out and micro-adjust functions, adopted 12 HD monitor. 3.Multi-function operation system With touch screen interface, k-type thermocouple, close-loop control, and intelligent temperature compensation with automatically system, integrated design of top heater and sucker point. It can auto identify a high degree of suction and mounting. With automatic soldering and desoldering function. the temperature can be set to 6 segment and 6 segment constant temperature control, N groups of storage temperature setting parameters according to kinds of BGA chip set. 4.Superior safety functions After finish desoldering and soldering, there is alarming, when temperature goes out of control, the circuit will automatically power off, it is of double excess temperature protection function. Temperature parameter has a password to avoid arbitrary changes, with superior safe protection functions, can protect PCB, components and the machine from damage at any abnormal situation Specification parameters 1 Total power- 5100W Max 2 Top heater power- 1200W ¡ê¡§1st heater 3 Bottom heater power -1200W ¡ê¡§2nd heater 4 3rd IR heater- 2700W (independent controlling left and right IR heaters) 5 power-AC 220V10- 50/60Hz 6 Electrical materials temperature control system Adopted Dalian University of Technology 7 Dimensions- 640,630,900mm 8 Temperature control K-type thermocouple (Closed Loop), 9 Positioning V type groove;with universal fixture 9 P C B size- Max 410 mm Min65mm 10 Available BGA chip-180mm 11 External temperature sensor1piece 12 Net weight- 65kg Package Wooden box Dimension :80*80*105cm Gross weight: 120kg Delivery time: 3-7 working days
Main features 1.Embedded industrial control computer,windows system. Adopt high definition human-machine interface, PLC control, there is password protection and modify function, can show 4-6 temperature curves and store multiple sets of data, with instant curves analysis function, and analyzing and correct BGA temperature at any time; 2.For guarantee the heating effect and mounting precision, control independently the top heater and mounting heat ,adopted linear slide make X,Y,Z axis can do micro adjustment and rapid positioning;after mounted, no need to move the PCB board in the bottom area, it can heat directly when move the top heater, avoid the moving of bga placement when move the PCB. Ensured the mounting accuracy and welding effect. 3.top and bottom heaters are hot-air heating, the third IR heater is infrared heating, the top and bottom heaters can heat PCB from upper and bottom at the same time, three heaters control independently. Show the heat time, temperature, and curves act, on the touch screen. 4.choose high accurate K type close-loop thermocouple, and PID parameters automatic adjustment system control temperature precisely through PLC and temperature module, keep the temperature deviation at 2 degree.external temperature measuring interface check temperature precisely, achieve accurate analysis and collate the actual temperature curve. 5.V-groove PCB support, with rapid, convenient and accurate positioning, can fit for all kinds of PCB board. 6.Flexible and removable universal fixture the operator and the protective effects and no damage to the PCB board suitable for all kinds of sizes of BGA repair. 7.Adopted all kinds of BGA nozzles, with 360,227; rotation, easy for installation and replacement, customized is available; 8.Adopt adjustable CCD color optical system, with a beam split, zoom in, zoom out and micro-adjust functions, has automatic chromatism resolution and brightness adjustment system, can adjust the clearness of the image by hand or automatic. 9.The X, Y axis and R angle with micrometer adjust; alignment accuracy is within0.01mm, with high definition HD monitor, avoiding human operation errors completely. 10.There are 8 segments rising temperature and 8 constant temperatures, can store millions of temperature curves, curve analyze, set and modify on the touch screen. 11.With voice control ãalarm in advance .À function, 5-10 seconds before finished soldering and desoldering alarm the operators with voice control to prepare the related works. Powerful cross-flow fan cool the PCB board fast by hand or automatic after desoldering and soldering, it can prevent the PCB board from deformation, ensure the welding effect. 12.With vacuum pump,|¦Ìangle 60 rotation, micrometer precise adjust mounting and nozzle, need no air source. 13.With CE certification, there is emergency stop switch and automatic cut off protective device when abnormal situation happen. Specifications and technical parameters: 1 Total Power-4850W 2 Top heater-800W 3 Bottom heate-The second heat area 1200w, the third heat area 2700w (plus size area to suit any kinds of PCB board) 4 Power-AC220V 50/60Hz 5 Dimensions-L790W640H800 mm 6 Positioning-V-groove, PCB support can X,Y axis adjust at any direction, additional with universal fixture 7 Temperature control-K Sensor, Closed loop 8 Temperature accuracy-2 degree 9 PCB size-Max 370 x 410mm Min 22 x 22mm 10 Work bench fine-tuning-front and back 15mm, right and left 15mm 11 Camera magnification10x-100x times 12 BGA chip2*2-80*80mm 13 Minimum chip spacing-0.15mm 14 External Temperature Sensor1-5 pieces available to choose, optional 15 Placement Accuracy-0.01MM 16 Net weight-93kg Package Wooden box Dimension :80*80*105cm Gross weight: 120kg Delivery time: 3-7 working days
Ace, high precision servo system and high-precision machine parts can meet the requirements of various large area laminating process . 3.6 pasting smooth, no bubbles, without wrinkles. 99.5% of the products after pasting with no need for defoaming. 3.7 imported motor drive imported optical fiber induction positioning. 3.8 imported plc control, touch screen human-machine interface, set up the parameters simple and intuitive view , convenient easy to operate, can set up to modify the parameters and stored many sets of parameters which pasting different products required. 3.9 overall structure of the machine humane, safe, nice.
1.About the application field of cog bonding machine xcg93-c1(the pressure)¡ê¬ Cog bonding equipment (the pressure) is widely used in a variety of lcd display (lcd), modules (lcm) and large-sized display panel production, assembly, maintenance, production enterprises; such as¡ê¬ mobile phones, laptops, lcd monitors, tablet pcs, lcd / lcm production, assembly, repair enterprises.
1¡¡éabout the application field of laser repair machines¡ê¬ Laser repair machines are widely used in various large-size liquid crystal display (lcd), liquid crystal display (monitor), tablet pc (pad), lcd / lcm production, assembly, repair enterprises. 2¡¡ébasic parame
2.12 cavity material¡ê¬ all sus304 3¡¡éabout the functions and characteristics of automatic remove bubble machine xcp52 - q1¡ê¬ 3.1 using imported components, ensure the equipment precision and service life. 3.2 equipment stability, low noise, perfect appearance, high efficiency. 3.3 omron temperature control, temperature accurately.
3¡¡éabout the functions and characteristics of the pulse hot bar machine xcm50-a1 3.1 heating by upper pulse , ccd fluctuation counterpoint is adjustable 3.2 the temperature of up and down pulse heating curve is the same as digital temperature display. 3.3 sunsom patent (patent no. Zl201120120232.2)¡ê¬ sunsom cylinder structure pressure system can eliminate weight of head, accurate pressure . 3.4 can store 500 groups of function parameters. 3.5 pulse source output parameters can be adjusted according to the power head.
"1" button, the equipment running, press the" o" button, equipment stop working. 6. Timer: setting and display the polishing time 7. Counter: record grinding number, if want to recount, can press the reset button. 8. Heavy hammer: adjust heavy hammer position, adjustable grinding pressure, a total of three different gear is available. 9. Compaction pin: the pressure in the center, to grind fixture grinding fixture put some pressure. 10. Prevent turn pin: insert in jig anti turn groove, prevent grind chassis rotation.
Four corners pressurized polisher May process most kinds of standard fiberoptic connectors, such as fc/upc, sc/upc, st/upc, lc/upc, mu/upc, fc/apc, sc/apcetc. Adapt to four corners compression, jig will be installed stable. Compact size. Excellent connector end force polishing quality. Designed for volume production, high productivity(5 inch grinding dish only) Save material and low cost for grinding. 5. Machine size: 110l*110w*150h 6. Polishing time setting: 0~60seconds.
