PT330 special inverters are developed for the power supply of water pumps based on the core control algorithm of PT330 high performance inverters and the control requirements of PV water pumps.All series products apply infineon power modules.The funiction of Maximum power tracking,dormant at weak light,wake up at strong light,high water level dormant,underload pre-warning and other control protection functions can ensure normal operation of water pumps according to the customers' requirements to switch to the grid power supply. 1.Through adopting advanced MPPT technology,this product can make full use of the efficiency of the solar cell array. 2.It can automatically adjust the motor speed and the water flow along with the intersity of sunlight. 3.Automatically sleep when on high-water level and automatic restart when on low-water level to realize automatic control through water level. 4.Can prevent pump from anhydrous idling. 5.It also can enter automatically to sleep model when the intensity of sunlight is weak(e.g.The sunset.),as well as can exit the sleep model when the intensity of sunlight is becoming strong(e.g.the sun rise.). 6.Protect itself in trouble and improve the reliablity of whole system. Â Model: PT330-011D-3B: DC/AC input voltage: DC input:400-750vdc AC input:3-phase 380V Â Â Â Â Â power:Â 11KW Â Â Â Â Â Â Â Â Rated input current: 26A Â Â Â Â Â Â Â Rated output current: 25AÂ Â Â Â Â Â Â Adaptable motor: 11KW
Battery type:12v 100ah Lifepo4 Pouch Charge cut-off voltage:14.6V Power : 1.2KW Continuous discharge current: 100A Peak discharge current:250A (3S) Discharge cut-off voltage : 10V Cyclelife: over 2000 times at 80% DOD by stardard usage Charge temperature: 0-45 degree Discharge temperature: -10 to 60 degree Battery Weight:13.6KGS Max Size : L 330* W 173* H 217MM Protection : IP66
Product introduction: 1, MPPT lithium battery solar street light controller automatically adapts to 12V and 24V systems. 2, built-in boost type constant current source, the efficiency can reach above 95%. 3, with 4 working modes, working time and LED lamp brightness can be adjusted. 4, with infrared remote control function, all parameters can be set using a remote control key. Can also be used to set the button, directly 5, displayed on the digital tube. 6. The integrated street light controller has a smart power-down function to extend the working hours of the LED lights. 7. High-efficiency PWM charging technology is adopted to ensure that the battery is working in the best condition, which greatly prolongs the service life of the battery and has high-accuracy temperature compensation. 9, with overcharge, over discharge, electronic short circuit, overload protection, anti-reverse protection. 10, full plastic, metal body, waterproof and drop, to deal with various harsh environments.
Product introduction: 1, solar street light controller can automatically adapt to 12V and 24V systems. 2. It has a dual-period control function (lit at night and before dawn) to meet the individual needs of customers for street lamps. 3. There are three kinds of load power supply modes: pure light control, light control on + delay off (single time), light control on + delay off - delay on + light control off (double time). 4. The dual-period solar street light controller adopts intelligent machine design. All work processes are controlled by software and can achieve high precision and high reliability. 5, using high-efficiency PWM charging technology, with high-precision temperature compensation. 6. The digital tube displays the operating parameters of the LED lamp. 7, with overcharge, over discharge, electronic short circuit, overload protection, anti-reverse and other full electronic protection. 8, the whole machine adopts full potting process, waterproof rating IP68.
Commercial Solar Inverter Commercial solar inverter are designed to handle the scale of power production and consumption required for large projects. If the system includes battery storage, the inverter can also help store excess solar energy in the batteries or charge it from the grid. Commercial properties typically use three-phase power, and commercial three-phase inverters are designed to synchronize with three-phase power to provide a more stable current. The right choice of inverter for commercial solar and battery systems depends on a variety of factors, including the size and configuration of the solar array, the presence of a battery storage system, the type of electrical system in the building, and local codes and utility policies. Commercial solar inverter is larger and more powerful versions of residential inverters, specifically designed to handle the higher electricity demands of commercial and industrial applications. They are a crucial component of a commercial solar power system, responsible for converting the direct current (DC) electricity generated by solar panels into usable alternating current (AC) electricity to power commercial buildings, factories, and other large-scale facilities. Our state-of-the-art commercial solar inverters, combined with our expertise in solar energy, provide innovative solutions that drive your business towards sustainability.
Solar PV Inverter The Senergy solar inverter product line is suitable for a variety of applications. From residential rooftop solar systems, commercial building integrated solar systems, industrial rooftops to megawatt-scale solar power plant applications, Senergy offers a wide range of grid-tied string and centralized inverters for interacting with major solar modules. The role of a solar inverter is simple: it converts the direct current (DC) generated by solar panels into alternating current (AC) that can be used by appliances.
A solar inverter is an important part of a home solar system. It converts the direct current (DC) stored in batteries into alternating current (AC) that can be used by household appliances. Most homes use AC power, although solar panels and small wind turbines often produce DC power. This is why inverters are an integral part of off-grid and grid-connected solar systems. Uses and Benefits of Solar Inverters In the absence of a backup grid, battery-based inverters can meet less demanding requirements. However, if there is an accessible grid, a system with a hybrid inverter can take advantage of it, and has the added benefit of storing power with batteries when the sun is not shining. If the roof is heavily shaded, a microinverter system is a good choice because it has an inverter on each photovoltaic (PV) module and each module is managed separately to provide excellent efficiency and high throughput.
Intelligent Solar Inverter Since the Senergy Power Optimiser handles maximum power point tracking and voltage management separately for each solar module, the intelligent solar inverter is only responsible for the DC to AC inversion. It is therefore a simpler, more cost-efficient and more reliable solar inverter. The fixed string voltage ensures that operation is always at maximum efficiency, independent of string length and temperature. In addition to its function as a DC-optimised PV inverter, the intelligent solar inverter also manages the battery and system energy as part of the Senergy home solution. Versatile and intelligent hybrid inverter for continuous power supply using solar, AC and battery power. This is a simple and intelligent solar inverter with an energy storage system for homeowners who want to store energy in batteries for night-time use or for their own use on demand. It will automatically consume the reserved power from the batteries at night or during power outages. This hybrid PV system will reduce dependence on the utility. Smart Energy Home Intelligent solar invertercan already monitor and manage solar energy production and are perfect for managing energy storage and energy use. Inverters can store solar energy in batteries for use at night, use excess PV energy to heat water, or activate other smart devices during the day to help reduce electricity bills. By managing energy holistically, the PV inverter transforms the smart home into a smart energy home and puts power in the hands of consumers.
Inverters for commercial and industrial photovoltaics and battery storage Saving energy costs and reducing the CO2 footprint are important issues for companies. Three effective ways of achieving greater energy efficiency are: generating and consuming renewable energy through low-maintenance solar PV plants â?? integrating battery storage systems, e.g. to perform peaking â?? and reducing the need for expensive reactive power. senergy new energy offers suitable inverters for all these measures. Be prepared for everything Simple surge protection Firemans switch can be triggered remotely DC combiner to prevent AC lines on the roof Lean solutions for grid and system protection Compact reactive power inverters for new and existing plants
Solar inverter 5kw for large houses, offices and commercial shops. senergys Solar Inverter 5KW is the first choice for customers with frequent power cuts in homes, commercial shops etc. It is equipped with a solar inverter capacity of 5.5KVA. It can easily run 2 tons of AC power using 2 fans, 8 LED lights and 1 fridge. The price of the Solar Inverter 5KW depends on the type of solar system. Solar Inverters 5KW is divided into three categories: 1st grid-connected solar system, 2nd off-grid solar system, 3rd hybrid solar system. Solar Inverter 5KW for large houses, offices and commercial shops. Solar Inverter 5KW from Senergy is the first choice for customers with frequent power cuts in homes, commercial shops etc. It is equipped with a solar inverter capacity of 5.5 kVA. It can easily run 2 tons of AC power with 2 fans, 8 LED lights and 1 fridge. Is this solar panel kit right for me? This kit based on a 5kW micro-inverter is an important residential solar system. It is one of the most popular installed systems. The amount of energy produced by these systems is enormous. A Solar inverter 5kw kit requires a maximum of 299 sq ft of space. This Solar inverter 5kw kit can provide 5,000 watts of DC electricity. Assuming at least 5 hours of sunshine per day and a south-facing solar array, this could produce an estimated 350 to 850 kilowatt hours (kWh) of alternating current (AC) per month. The highest output will be achieved by an unobstructed south-facing view of the sun to obtain maximum solar energy. Actual power generated will vary depending on location, equipment and installation factors. Please refer to your electricity bill for the actual kWh of electricity used each month and compare this to what can be generated by these low cost 5kW PV systems.
Commercial solar inverter are designed to handle the scale of power production and consumption required for large projects. If the system includes battery storage, the inverter can also help store excess solar energy in the batteries or charge it from the grid. Commercial properties typically use three-phase power, and commercial three-phase inverters are designed to synchronize with three-phase power to provide a more stable current. The right choice of inverter for commercial solar and battery systems depends on a variety of factors, including the size and configuration of the solar array, the presence of a battery storage system, the type of electrical system in the building, and local codes and utility policies. Commercial solar inverter is larger and more powerful versions of residential inverters, specifically designed to handle the higher electricity demands of commercial and industrial applications. They are a crucial component of a commercial solar power system, responsible for converting the direct current (DC) electricity generated by solar panels into usable alternating current (AC) electricity to power commercial buildings, factories, and other large-scale facilities. Our state-of-the-art commercial solar inverters, combined with our expertise in solar energy, provide innovative solutions that drive your business towards sustainability.
Commercial solar inverters are larger and more powerful versions of residential inverters, specifically designed to handle the higher electricity demands of commercial and industrial applications. They are a crucial component of a commercial solar power system, responsible for converting the direct current (DC) electricity generated by solar panels into usable alternating current (AC) electricity to power commercial buildings, factories, and other large-scale facilities. Features SUPERIOR EFFICIENCY Maximum efficiency of 98.5% Large string current, compatible with large PV modules 30KW with natural cooling design HIGH RELIABILITY IP66 protection level for outdoor installation DC/AC Type Il SPD Optional: AFCl, Night SVG, I/V detection, and integrated PID INTELLIGENT MAINTENANCE Power consumption monitoring Remote configuration and upgrade Quick commissioning via mobile app String level current detection
Power Output: 220W Max Power Voltage:22.07V Cell Type: Monocrystalinline (166x166mm) Number of cells: 40pcs Dimensions: 1660 680 30mm Frame: Anodized Aluminium Alloy-silver Sheet: white Connector: MC4 or MC 4 comppatible Cable: 0.9m Packaging: 2pcs into one ctn box
Power Output: 550W Max Power Voltage:44.08V Cell Type: Monocrystalinline (182x182mm) Number of cells: 144pcs Dimensions: 2288 1138 35mm Frame: Anodized Aluminium Alloy-silver Sheet: white Connector: MC4 or MC 4 comppatible Cable: 0.9m Packaging: 2pcs into one ctn box
Retro Solar Shed Light Hanging Lamp with a ceiling mount for indoor and outdoor lighting is brand new high-quality light powered by Solar that does not require any electric wires or additional sources of energy. The solar panel is detached from the lamp head with 3 meters cable that provides flexibility in operating the lighting indoor while the solar powering source remains outside to reach the direct sunlight. The retro style shed light has an energy-efficient solar panel that absorbs the sunlight during the day and converts it into the energy which stores at rechargeable Li-Ion battery to power the light up when needed. The solar panel can be adjusted to a variety of angles to ensure it can absorb enough light from during the day. The shed light is easy to install, operate and maintain. The light provides illumination across a wide area and is perfect to maintain lighting in a shed, patio, veranda and garage. It is also suitable for balcony and other indoor and outdoor areas. The Solar powered Shed light is energy and cost-efficient solutions for Australian households. The Retro style Solar shed light lamp is Ideal for the following purposes: - Illuminating various indoor and outdoor areas including sheds, patios, verandas, garages, balconies etc without extra maintenance costs. - Ideal for maintaining casual lighting around the house, garden, porches, side and backyard, aisles etc. - Great lighting solution for the specific areas without using grid electricity. Universal Solar Powered Shed Light has the following features: - Energy-efficient outdoor lighting products powered by Solar Panel. - Powerful Lithium battery for continuous performance up to 8-12h when fully charged. Short charging time. - Separated solar panel from the light head with about 3m cord for flexibility in operating. - Fully automated operation process with Special built-in Light-control System for day/ night mode detection to control switch between On and Off. Manual switch control. - Universal Indoor suitable design. - Durable Waterproof and Heatproof outdoor design: IP65 water and weather resistance that can withstand various weather conditions. - Stainless steel and ABS materials provide a good thermos ability, high temperature- and rust resistance. - Easy to install, setup and operate. - No maintenance or electricity cost. User-friendly design, no wiring or any professional installation needed. Solar Shed Hanging Lampâ??s Package Included: 1 X Solar shed lamp. 1 X Solar Panel. 1 x Lightbulb. -
type: hybrid inverter AC input:120Vac~230VAC DC input: 120V ~450Vdc DC output: 48Vdc Power Output: 5.5KVA rated power output: 5KW power efficiency: >95% compatible solar panels: 4pcs of 535w mono solar panel
type: off grid inverter AC input:170Vac~230VAC DC input: 12VDC ~80VDC DC output: 24Vdc Power Output: 3.5KVA rated power output: 3.2KW compatible solar panels: 6pcs of 535w mono solar panel
type: off grid inverter AC input 170Vac~230VAC DC input: 12V DC output: 24Vdc Power Output 2KVA rated power output: 1.8KW compatible solar panels: 4pcs of 535w mono solar panel
Type: Lifepo4 Battery Rated Volt: 24V rated capacity: 200Ah Energy:5KWH regular discharging current:40A rated discharging current: 100A a max. discharging current: 150A recommended charging current:40A lifecycle: 5000cycles warranty:3years
Type: Lifepo4 Battery Rated Volt:24V rated capacity: 150Ah Energy:3.6KWH regular discharging current:30A rated discharging current: 80A a max. discharging current: 150A recommended charging current 30A lifecycle: 5000cycles warranty:3years