The DVS2811 is full digital 2 phase stepper driver based on DSP control. The drive voltage of which is from 40V to 110VAC. It is designed for use with the 2 phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter, regulated phase current from 0.5A to 8.0A. The circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly without noise and vibration. The highest micro step is 40000ppr. It is widely used in small size numerical control devices such as curving machine, packing machine, CNC and etc. FEATURES * 16 channels constant angle, constant torque micro steps, highest micro step: 40000ppr * Highest response frequency: 200Kpps * Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second * Opto-isolated signal I/O * Drive current is adjustable in 16 channels from 0.5A/phase to 8.0A/phase * Single power supply from 40V to 110VAC * Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 3s and it is recovered when stepper driver power on or signal MF changes from low level to high level).
The DVS368 is full digital 3 phase stepper driver based on DSP control. The drive voltage of which is from 24V to 80VDC. It is designed for use with the 3 phase hybrid stepper motor of all kinds with 57mm to 86mm outside diameter, regulated phase current from 2.5A to 6.2A. The highest micro step is 60000ppr. It is widely used in small size numerical control devices such as curving machine, packing machine, CNC and etc. FEATURES * 16 channels constant angle, constant torque micro steps, highest micro step: 60000ppr * Highest response frequency: 200Kpps * Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second * Opto-isolated signal I/O * Drive current is adjustable in 16 channels from 2.5A/phase to 6.2A/phase * Single power supply from 24V to 80VDC * Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 3s and it is recovered when stepper driver power on or signal MF changes from low level to high level).
The DVS3722 is full digital 3 phase stepper driver based on DSP control. The drive voltage of which is from 110V to 220VAC. It is designed for use with the 3 phase hybrid stepper motor of all kinds with 57mm to 130mm outside diameter, regulated phase current from 1.3A to 7.0A. The circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly without noise and vibration. The highest micro step is 60000ppr. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, computer embroider machine, packing machine and etc. FEATURES * 16 channels constant angle, constant torque micro steps, highest micro step: 60000ppr * Highest response frequency: 200Kpps * Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second * Opto-isolated signal I/O * Drive current is adjustable in 16 channels from 1.3A/phase to 7.0A/phase * Single power supply from 110V to 220VAC * Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 3s and it is recovered when stepper driver power on or signal MF changes from low level to high level).
Etonm motor entered dc motor industry since 2001, designed and developed series of dc gear motor, there are et-sgm12, et-sgm16, et-sgm20, et-sgm25, et-sgm27, et-sgm37, every series has several types. Type: et- sgm37 Voltage: 12v Speed: 7-240rpm Direction of rotation: cw, ccw Gear ratio: 1:10, 1:23.3, 1:30, 1: 50, 1: 70, 1:90, 1:150, 1:210, 1:270, 1:350, 1:450, 1:490, 1:630, 1:810 Application: atm, coin slector, coin feeder, vending machine, robotics, towel dispenser, soft paper dispenser, automatic closetool, sanitary bin, massagers, household electronic appliance... Carton and paper-maded pack
Etonm motor entered dc motor industry since 2001, designed and developed series of dc gear motor, there are et-sgm12, et-sgm16, et-sgm20, et-sgm25, et-sgm27, et-sgm37, every series has several types. Product type: et-sgm12 Voltage: 5v, 6v Speed: 52-260rpm Direction of rotation: cw, cww Reduction ratio: 1:5, 1:10, 1: 20, 1: 30, 1: 50, 1: 100, 1: 150, 1: 210, 1: 250, 1: 298, 1: 340, 1: 380, 1: 1000 Application: electronic lock, camera, robotics, city bus curtain, high-class toy, cigarette show stand... Carton and foam
Etonm motor entered dc motor industry since 2001, designed and developed series of dc gear motor, there are et-sgm12, et-sgm16, et-sgm20, et-sgm25, et-sgm27, et-sgm37, every series has several types. Type: et- sgm25 Voltage: 3v, 4.7v, 6v, 8v Speed: 30-110rpm Direction of rotation: cw, ccw Gear ratio: 1:50, 1:150, 1: 70, 1:90, 1:150, 1:270, 1:350, 1:450, 1:500, 1:630 Application: electric wine opener, electronic lock, high-class toy, automatic valve, automatic switch, automatica curtain machine, hair curler... Carton and foam
Etonm motor entered dc motor industry for since 2001, designed and developed 3 series of flat gear motor: there are cgm, fgm, and zgm. Every series has several types. Type: et-cgm775 Voltage: 24v Input power: 5.88~ 17.6w Torque: 17.6-60kg.Cm Design: gearbox with dc brushed motor Speed: 4.1rpm, 4.2rpm, 7.5rpm, 8.0rpm, 11.4rpm, 12.5rpm, 13.5rpm, 18rpm, 19rpm, 24rpm, 25rpm, 33rpm, 39rpm, 52rpm, 56rpm, 74rpm, 100rpm, 135rpm Reduction ratio: 1:36, 1:66, 1:94, 1:150, 1:196, 1:211, 1:277, 1:394, 1:624, 1:830, 1:1166 Application: pan/tilt camera, vending machine, auto shutter, welding machines, water meter ic card, grill, oven, cleaning machine, garbage disposers household appliances, slot machines, money detector, automatic actuator. Coffee machine , towel disposal, coin refund devices, peristaltic pump, lighting stage lamp . Carton and foam
The dynamo ZSFD-0907B is widely used for flashlight,lantern,portable electronic product and other hand-rotating dynamo products.the output detail of the dynamo is below: Rated Rotating Speed:2800 rpm DC Voltage Output:12v Rated Current Output:1000 mA Dimension:106mm(L)X51.5mm(W)X30mm(H). Normal packing methord for export.
High in quality and beautiful in appearance,with more sizes choice for customers.
Dc brushless motor Professional manufacture to develop and produce brushless motor and axial fan. It has strong technique developing ability and manufacture capacity. Its products have applied in various kinds of family electrical appliances, power tool, electrically operated toy, water pump, steam pump, health care products, vacuum cleaner, and automobile fine handicraft and so on.
Hood motor Ac110-240c, 50/60hz, 2800 rpm, 50-250w, cl.B, f/h It is widley used for cooker hood, range, fan blower..Etc. 20 pcs per caton with foam inside
Tail lift CD-QB05/90A 500kg Autormatic tilting at the ground Platfrom tilt adjustable at any position Low maintenance bushes fitted to all pivot points electrical safety valves mounted to all lift and tilt cylinders (option) Easy to use,easy installation,easy maintenance Water-proof control case and compulsory use of two hands Trolley stop (option) Rear bumper Mechanical chain lock to prevent the open of platform accidentally Warning label Wanderlead Control Seaworthy export packing,suitable for long distance ocean transportation
Hi-speed cut-size web sheeter Introduction: This machine is developed and consummated from our Servo Motor Driving Hi-Speed Sheeting & Ruling Line. Germany MKS or USA Rockwell motion controller with 5 modules. Mature and reliable control system. It is absolutely a global summit elite finished on the shoulder of a giant. Servo motor or AC motor with V.F drive for transmission. Precision mechanical structure. High speed. Easy operation. It is an ideal equipment for a converting plant to sheet a web sheet roll into different sized sheets. Features: 1. This machine employed German MKS or USA Rockwell Motion Controller with modules. Servo motor or variable frequency driving. MMI (man-machine interface) with touch screen control. Very simple and easy operation. 2. The MMI is for central parameter setting, display, live inspection and control of each part's working states. 3. The whole machine is linked and protected by a top PLC system. Sheeting length and speed are controlled by computer. Easy adjustment. Sheet accuracy is within 0.5mm. 4. Unwinder is a hydraulic over-turn turret. Conic loading. Big pneumatic torque brake. Floating manipulator with tension inspection. Automatic curved web paper open flat. Sheet squaredness is adjustable. Sheet on sheet conveying. Fast and stable. 5. Bobbin cutter for sheeting. Alloy steel blade. Both variable frequency and servo motor control systems are at request. 6. Blade loading protection offers in time safety protection. Top precision super hard aluminum alloy rollers are used as the guiding roller. 7. Three units of slitters for edge trimming and longitudinal slitting. 8. Electrostatic bar to eliminate static influence to sheeting speed and sheet fitting. 9. Sheeting blade is with air to make sheet feeding stable and prevent paper particle 10. Sheet rear absorbing air to assist thin sheet conveying at high speed. 11. Pneumatic shaking for sheet fitting. Automatic deep pile lifting and lowering. 12. Waste gate system with other quality inspection systems to push out poorly sheeted pieces and other poor products and convey only good product to the deep pile. 13. Exit air to make sheets enter deep pile smoothly. II.Related technical parameters Adopt materials Base paper, art paper, offset paper, NRC paper, paper plastic poly sheet , grey substrate white sheet,etc. Max. Sheeting speed 300 pcs/min Max. sheeting speed 250 m/min Sheeting accuracy 5 mm/m Sheeting length 400- 1800 mm Max. web dia. 1800 mm Web width 500-1420 mm Deep pile depth 1300 mm Paper weight 55- 550 gsm Sheeting blade pressure 550 gsm Installed power 25 kw Weight 11,000 kg Dimensions(L/W/H) 11x4.2x2.5 m Standard seaworthy steel pallet packing
name: dc planetary gear motor model: DPG36-555 Voltage: 12-24v speed: 10-500rpm torque: 2-30kg.cm
DC brushless motor control panel, sin wave solution, energy efficiency, low noise with all-round protection as: Over-voltage, Over current, Limit current, phase loss, anti-reverse, anti-lock, etc. Product picture: DC Brushless Motor Control Panel Performance data: Control way: Sin wave control, FOC Hall sensor: Senseless RPM: 0-5000 Speed control: RF/PWM/VSP/SPI Speed feedback: Yes Forward/Reverse function: Yes Can be with LED light: Yes Rated spec.: Input voltage: 220V/100V Power:80W Protection data: Current limit protection: 0.8A Over current protection:1.5A Phase loss: Yes Anti-reverse: Yes Anti-lock: Yes
80W DC Controller for Blower, Industrial Use, 485 Serial Coummication, sin wave solution, energy efficiency, low noise with all-round protection as: Over-voltage, Over current, Limit current, phase loss, anti-reverse, anti-lock, etc. Performance data: Control way: Sin wave control, FOC Hall sensor: Senseless RPM: 0-5000 Speed control: RF/PWM/VSP/SPI Speed feedback: Yes Forward/Reverse function: Yes Can be with LED light: Yes Rated spec.: Input voltage: 220V/100V Power:80W Protection data: Current limit protection: 0.8A Over current protection:1.5A Phase loss: Yes Anti-reverse: Yes Anti-lock: Yes
80W Brushless Direct Current Blower Motor Driver with High quality, sin wave FOC control, energy efficiency, low noise with all-round protection as: Over-voltage, Over current, Limit current, phase loss, anti-reverse, anti-lock, etc. Performance data: Control way: Sin wave control, FOC Hall sensor: Senseless RPM: 0-5000 Speed control: RF/PWM/VSP/SPI Speed feedback: Yes Forward/Reverse function: Yes Can be with LED light: Yes Rated spec.: Input voltage: 220V/100V Power:80W Protection data: Current limit protection: 0.8A Over current protection:1.5A Phase loss: Yes Anti-reverse: Yes Anti-lock: Yes
DC24V water pump control, 1.5A, sin wave FOC control, energy efficiency, low noise with all-round protection as: Over-voltage, Over-current, Limit current, phase loss, anti-reverse, anti-lock, etc. Performance data: Control way: Sin wave control, FOC Hall sensor: Sensorless RPM:Â 0-10000 Speed control: IR/IR/PWM/VSP/SPI Speed feedback: Yes Forward/Reverse function: Yes Can be with LED light:Â No Rated spec.: Input voltage: DC24V Power: 36W Protection data: Voltage range: DC16-30V Voltage limit: 35V Current limit protection: 1.5A Phase failure protection: Yes Product features: Super silent Heat dissipation structure design
Rated Torque : R5.8*4.8 vibrators Rated Speed : 7300±10%rpm Rated Current :135 mA MAX Rated Voltage : 3V(customized) Noise : 55dB (Distance:10cm) Weight : 8g Size : Customized
Motor control solution could be widely used in AC/DC/Step/Servo motor movement control, our FOC or SVPWM control algorithm ensure the smooth running low energy consumption and low heat emission of the motor, contact us for more information.
