Tea leaves.
One Step Troponin Test (Whole blood/Serum/Plasma FOR IN VITRO DIAGNOSTIC USE ONLY SPECIMEN COLLECTION 1. Testing should be performed immediately after the specimens have been collected. Do not leave the specimens at room temperature for prolonged periods. Specimens may be stored at 2-8C for up to 3 days. For long-term storage, specimens should be kept below -20C. 2. Bring specimens to room temperature prior to testing. Frozen specimens must be completely thawed and mixed well prior to testing. Specimens should not be frozen and thawed repeatedly. MATERIALS PROVIDED 1. Test cards individually foil pouched with a desiccant 2. Plastic dropper 3. Package insert MATERIALS REQUIRED BUT NOT PROVIDED 1. Timer/clock 2. Pipette 3. Controls ASSAY PROCEDURE 1. Read package insert carefully before testing. Allow the test devices, whole blood, serum or plasma to equilibrate to room temperature (15-30C) prior to testing. Do not open pouches until ready to perform the assay. 2. Remove the test device from the foil pouch and use it as soon as possible. 3. Place the test device on a clean and level surface. Hold the dropper provided vertically and transfer 3 drops of specimen (100�µl) to the specimen well (S) in the test device. 4. Wait for the red line(s) to appear. The result should be read between 10 to 15 minutes. INTERPRETATION OF RESULTS 1. Positive Two colored lines should be observed in the viewing window. The line in the test region (T) is the probe line; the line in the control region (C) is the control line, which is used to indicate proper performance of the device. The color intensity of the test line may be weaker or stronger than that of the control line. 2. Negative The control line appears in the test window, but the test line is not visible. 3. Invalid No line appears in the control region. Under no circumstances should a positive sample be identified until the control line forms in the viewing area. If the control line does not form, the test result is inconclusive and the assay should be repeated.
1. The One Step RV IgG/IgM Test can be performed used on Whole Blood /Serum / Plasma. 2. To collect whole blood, serum or plasma specimens following regular clinical laboratory procedures. 3. Testing should be performed immediately after specimen collection. Do not leave the specimens at room temperature for prolonged periods. For long term storage, specimens should be kept below -20â??. Whole blood should be stored at 2-8â?? if the test is to be run within 2 days of collection. Do not freeze whole blood specimens. 4. Bring specimens to room temperature prior to testing. Frozen specimens must be completely thawed and mixed well prior to testing. Specimens should not be frozen and thawed repeatedly. Test Procedure Allow the test, specimen, buffer and/or controls to reach room temperature 15-30â?? (59-86â??) prior to testing. 1. Bring the pouch to room temperature before opening it. Remove the test device from the sealed pouch and use it as soon as possible. 2. Place the test device on a clean and level surface. 3. Hold the dropper vertically and transfer 1 drop of specimen (approximately 10μl) to the specimen well(S) of the test device, then add 2 drops of buffer (approximately 80μl) and start the timer. See illustration below. 4. Wait for the colored line(s) to appear. Read results at 15 minutes. Do not interpret the result after 20 minutes. Interpretation of Results Positive: Control line and at least one test line appear on the membrane. The appearance of T2 test line indicates the presence of RV specific IgG antibodies. The appearance of T1 test line indicates the presence of RV specific IgM antibodies. And if both T1 and T2 line appear, it indicates that the presence of both RV specific IgG and IgM antibodies. The lower the antibody concentration is, the weaker the result line is. Negative: One colored line appears in the control region(C). No apparent colored line appear in the test line region. Invalid: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test with a new test device. If the problem persists, discontinue using the test kit immediately and contact your local distributor.
Tea,oolong tea, tie guan yin tea, bai hao yin zhen tea,bai mudan tea,pu erh tea,emei bamboo leaf green tea,zheng shan xiao zhong tea.
1)Varied shapes, signs and design are available. 2)Customer's logo is accepted 3)It will leave 'VOID'or logo on the article when people tear it 4)High quality with competitive price 5)Packing in roll or sheet by rolls
1)Varied shapes, signs and design are available. 2)Customer's logo is accepted 3)It will leave 'VOID'or logo on the article when people tear it 4)High quality with competitive price 5)Packing in roll or sheet By rolls or sheets
1)Varied shapes, signs and design are available. 2)Customer's logo is accepted 3)It will leave 'VOID'or logo on the article when people tear it 4)High quality with competitive price 5)Packing in roll or sheet By rolls or sheets
Salted Beef Omasum. We produce high quality Dry Salted Beef Omasum . PRODUCT SPECIFICATION: MOISTURISE LESS THEN 2% NO SALT INSIDE OF LEAVES HALF OF 1% ROUND CUTTING NO BROKEN LEAVES NO WHITE SPOTS NO FAT NO BLEACH WASH Packing: 40 KG IN 1 PP Bags
Plastc frame First please leave your email address and phone number in the message that you will send to me We can make the customed plastic moulding frame for you according to your request. At the same time, we have many kinds of plastic frames that you can choose.
Thermal reduction mucosa Thermal Release Film, the industry is called positioning cutting foam rubber, also known as hot tear tape/cutting film/MLCC cutting film, before heating, taped to be stick to surfaces, can be stick to good protection and shielding effect, after thermal process, can be easily sticky, so it can be processed parts simple/easy stripping and leave no residue, automation, save the human/material; To maximize the efficiency. Our company use imported glue solvent and substrate can be customized production
Our stock carbon fiber plates are fabricated with multiple layers of high strength carbon fiber prepreg using a high pressure molding process. All carbon fiber plates are comprised of: Outer Material: 2x2 Twill Carbon Fiber Prepreg Inner Material: 0/90 (Balanced) Unidirectional Carbon Fiber Prepreg Exterior Finish: Matte/Glossy Plates can be cut to size or machined to print via CNC milling or waterjet cutting. Just leave your detail request to us, and pricing will be emailed for approval.
Advantage 1.The frame is made of galvanized steel. Steel is a common durable material used for many trampolines. The material Is treated to be rust and weather resistant. 2.The model’s enclosure net is also treated to be uv resistant. This means you can leave your trampoline out in harsh Weather conditions without worry. 3.The trampoline includes 96 springs. For those lucky little ones, that means maximum bouncing.
High-risk security situations do not leave any margin for error thus requiring intricate security procedures designed to ensure safety and piece of mind. The tm-915 has been created specifically with this in mind. Tm-915 mainly used in detecting the close state of door and window, when the door or window opened as unknown reason and the detector will send out specific radio wave to alarm host to achieve remote alarm.
$6.98 refurbished Nokia Motorola mobile phone w..tendtronic d0t c0m service at tendtronic d0t c0m Package including 1x phone 1x battery 1x charger 1x package 1x manual Chinese English French, Portugal and Spain Russian Arab and Turkey Please leave us message about the color w..tendtronic d0t c0m
Features: 1. Ultra glossy finish, a perfect way to add some style 2. Fit perfectly around all buttons, controls and ports. 3. High quality, removeable without leaving any sticky residue behind 4. Super durable, never fade or rub off 5. Excellent protection from scratch, dust , water and radiation
Electronic protective stickers Name: ipod-nano protective stickers Spec: 83*96mm Material: pvc, 3m, gel Remark: í° excellent protector for your ipod í° 3m materials range from vinyl to all different types of pvc: adhesive, transparent, metallic í° bubble-free application í° remove and reuse without leaving residue í° scratch and dust prevention í° offer design service according to you ideas None
Plastic mold First please leave your email address or phone number in the message that you will send to me. Thanks Product: plastic injection mold We are a professional plastic injection mold manufacturer in china. We can provide you high quality mold and part at a very nice price. Welcome your question and inquiry. We will give you response at the earliest time.
The energy monitor is helping to change the energy usage habits of households and help family to save energy, money and do something for environment protection. 1) with wireles tranmitting, receiver display the current power information, the money you are spending on power. 2) history power charge you had spent for monthly and annal. Up to 2 years information can be preserved. 3) check from a single location if appliances before leaving your home. Be safe every time you leave your home. 4) an audible alarm for excessive electricity usage 5) power supply: 2pcs aa for receiver; 2pcs aaa for transmitter (not include) 6) wireless transmitting range: up to 30m in room. 7) display currencies: ú, $ & euros 8) day/week/month usage view and daily/weekly/monthly average view 9) clock/date display 10)accessories: 1 receiver, 1 transmitter with, 1 dc adaptor, 1 clip on sensor, 1 instruction manual. Packingindividual packing: 1pc/pv bag, 1set/ plain paper box; 20pcs/ctn Carton size:480x250x260mmcarton cbm:0.0312 Qty per carton20pcs/ctncartons per 20' container:833 Gross weight: 12kg/ctnqty per 20' container:16640
The energy monitor is used to change the energy usage habits of households and save energy & money for family, and also do something for environment protection. Features: 1) with wireles tranmitting, receiver display the current power information, the money you are spending on power. 2) history power charge you had spent for monthly and annal. Up to 2 years information can be preserved. 3) check from a single location if appliances before leaving your home. Be safe every time you leave your home. 4) an audible alarm for excessive electricity usage 5) power supply: 2pcs aa for receiver; 2pcs aaa for transmitter (not include) 6) wireless transmitting range: up to 30m in room. 7) display currencies: ú, $ & euros 8) day/week/month usage view and daily/weekly/monthly average view 9) clock/date display 10)accessories: 1 receiver, 1 transmitter with, 1 dc adaptor, 1 clip on sensor, 1 instruction manual. Carton packing Szie:51*45*31cm 20pcs/ctn 0.6kg/piece
Telephone recording box Recording the call: using the trb can realize the process of call. Two ways to startup. A. Auto-recording: when you pick up the telephone, the trb will record automatic and when you put down it will stop recording. This way can record the call from the beginning to the end. This usually used to some important occasion/conversation. B. Start up by your hand: using this way you can start or stop the recording at any time by pressing the recording button on the main interface. Using this wa y you can choose the important contents to record. Manage the voice data: you can set up various telephone ring, calling color music, calling number pop up, auto-leaving message, recording way, telephone refusing, telephone notebook, history recording, and so on. Leave message: the trb has the auto reply and record function which just like a telephone replying recording machine. The user can enact the times of the librations, when exceed the times and no person to answer, the trb will give answer and take a message for you. The user also can record the reply contents at will, saving or change then at anymoment.
