The STC-P016 Left Angle (90-degree) SATA Cable features a standard (straight) SATA receptacle as well as a right-angled SATA receptacle, providing a simple 18-inch connection to a Serial ATA drive, with full SATA 3.0 bandwidth support of up to 6Gbps when used with SATA 3.0 compliant drives. The left-angled SATA connection enables you to plug in your Serial ATA hard drive in hard-to-reach areas or tight spaces, while the low profile and flexible design of the cable improves airflow and reduces clutter in your computer case, helping to keep the case clean and cool. Constructed of only top-quality materials and designed for optimum performance and reliability this 6â?³ SATA cable is backed by our lifetime warranty. As an alternative, Stccable.com also offers a 6in Left Angle SATA cable, which provides the same simple installation as this right-angled SATA cable, but allows the cable to connect to the SATA drive from the opposite direction.
The STC-P036 Serial ATA Cable features two 7-pin data receptacles and supports full SATA 3.0 bandwidth of up to 6Gbps when used with SATA 3.0 compliant drives. Featuring a low profile, yet durable construction, the flexible design improves airflow and reduces clutter in your computer case, helping to keep the case clean and cool. Constructed of only top-quality materials and designed for optimum performance and reliability this 18â?³ SATA cable is backed by our lifetime warranty.
The STC-P031 Right Angle (90-degree) SATA cable (36in) enables you to plug in your SATA hard drive in hard-to-reach areas or tight spaces, using right-angled SATA connectors to reduce the amount of space required at the connection point and supports full SATA 3.0 bandwidth of up to 6Gbps when used with SATA 3.0 compliant drives. Featuring a low profile, yet durable construction, the flexible design improves airflow and reduces clutter in your computer case, helping to keep the case clean and cool. Constructed of only top-quality materials and designed for optimum performance, and reliability this right-angle SATA cable is backed by our lifetime warranty.
The Left Side-Angled SATA Cable (18-inch) features one straight and one left side-angled (7-pin) data receptacle, which positions the cable so that it runs parallel to the drive ports - ideal for connectivity in narrow spaces, enabling installation of the drive as needed within the system case. The cable also features a flexible low-profile design that helps improve airflow and reduce clutter in your computer case, which helps keep the case clean and cool. Constructed of only top-quality materials and designed for optimum performance and reliability this 18³ SATA cable supports full SATA 3.0 bandwidth (up to 6Gbps) when used with SATA 3.0 compliant drives and is backed by our lifetime warranty.
The STC-P038 0.3-meter (30cm) SATA Data Extension Cable enables you to extend the reach between internal SATA drive connections by up to 30 cm (11.81 in). The extension simplifies drive installation by overcoming typical connection limitations, and it reduces the risk of damage to the drive or motherboard SATA connectors by eliminating the need to strain or stretch the cable in order to make the necessary connection. Constructed of only high-quality materials and expertly designed for reliability and peak performance, the 30CM cable is backed by Stccable.com's Lifetime Warranty. Internal SATA 2 II Extension Cable SATA 7pin Male to Female Data Cables 30CM/50CM HDD Hard Disk Drive Cord line.
This 18in right-angled latching SATA cable features a (straight) female Serial ATA connector as well as a right-angled (female) SATA connector, providing a simple connection to a Serial ATA drive even if space near the drive's SATA port is limited. The cable offers latching connectors, which ensure secure connections for SATA hard drives and motherboards that support this feature. Once the right-angled SATA connector has been inserted into the drive's SATA data port, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point - an ideal solution for small or micro form factor computer cases.
The right-angled SATA cable supports high speed data transfers up to 6Gbps and features a thin, narrow construction that helps to improve airflow within the computer case; the cable features a rugged, yet flexible design that makes it easy to make the SATA connection as needed, and is backed by Stccable.com's Lifetime Warranty. Each major revision of the Serial ATA interface specification has doubled the maximum data transfer rate. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps.
This 18in right-angled latching SATA cable features a (straight) female Serial ATA connector as well as a right-angled (female) SATA connector, providing a simple connection to a Serial ATA drive even if space near the drive's SATA port is limited. The cable offers latching connectors, which ensure secure connections for SATA hard drives and motherboards that support this feature. Once the right-angled SATA connector has been inserted into the drive's SATA data port, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point - an ideal solution for small or micro form factor computer cases.
STC SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers. One end of this internal cable features a straight connector, while the other end uses a 90-degree connector, which can make for better cable management in some situations, especially in tight spaces. Each end has an attached locking latch, to ensure that your connections do not come loose due to movement or vibration.
STC SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers. One end of this internal cable features a straight connector, while the other end uses a 90-degree connector, which can make for better cable management in some situations, especially in tight spaces. Each end has an attached locking latch, to ensure that your connections do not come loose due to movement or vibration.
STC SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers. One end of this internal cable features a straight connector, while the other end uses a 90-degree connector, which can make for better cable management in some situations, especially in tight spaces. Each end has an attached locking latch, to ensure that your connections do not come loose due to movement or vibration.
This 18in right-angled latching SATA cable withTransparent green features a (straight) female Serial ATA connector as well as a right-angled (female) SATA connector, providing a simple connection to a Serial ATA drive even if space near the drive's SATA port is limited. The cable offers latching connectors, which ensure secure connections for SATA hard drives and motherboards that support this feature. Once the right-angled SATA connector has been inserted into the drive's SATA data port, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point - an ideal solution for small or micro form factor computer cases. The right-angled SATA cable supports high-speed data transfers up to 6Gbps and features a thin, narrow construction that helps to improve airflow within the computer case; the cable features a rugged, yet flexible design that makes it easy to make the SATA connection as needed, and is backed by Stccable.com's Lifetime Warranty.
1 USB C Female to Female Extension Cable with Panel Mount Screw Hole, use to mount to the PCI bracket, helps you easily connect the devices with a type C interface. it's easy to hook up and install and it's just an extension/port so no need to install drivers; 2 This USB 3.1 Type-C Extender Adapter Cable is designed for extending the connection between USB-C devices such as Nintendo Switch, Type-C smartphones, or laptops for charging or data syncing.
1 USB 3.1 Front Panel Header to USB-C Type-C Female Extension Cable 50cm with Panel Mount Screw 2 USB 3.1 require a different front panel header than USB 3.0. The USB 3.1 port interface is using the USB 3.0 pin set and more. It is designed to be backward compatible (will explain later).
The STC-I010 Right angle USB 3.0 extension cable extends the reach of a USB 3.0 port on your laptop or desktop computer by 8 inches and gives you more room for connecting multiple devices. The cable can also help to prevent damage to the USB 3.0 port on your computer in testing environments or other situations where the port is accessed repeatedly. Right-Angled Extension This USB 3.0 extension cable features a Right-angled design. The compact design makes for a clean fit next to your computer. Take a closer look by clicking on the picture for a larger image.
The STC-I013 Right angle USB 3.0 extension cable extends the reach of a USB 3.0 port on your laptop or desktop computer by 8 inches and gives you more room for connecting multiple devices. The cable can also help to prevent damage to the USB 3.0 port on your computer in testing environments or other situations where the port is accessed repeatedly.
The STC-I015 USB 3.0 A Male to USB Female for External Hard Disk with Extra Power, Black USB 3.0 Male to Dual USB Female Extra Power Data Y Extension Cable for 2.5" Mobile Hard Disk, Two USB female connector, One is for USB 3.0 power and data, another one for USB 2.0 power only. Does one USB port not supply enough power for your USB device? Our Sync USB 3.0 Power Adapter Y cable for you is the solution. Our cable allows for power to be taken from 2 USB ports, like a PC and an External hard drive. Allows you to link 1 USB device into 2 USB Ports on your PC for more power. There are times you may have an external device, such as a portable 2.5 hard drive, and a standard USB cable is not able to transfer enough power to operate the device.
The STC-I015 USB 3.0 A Male to USB Female for External Power Data Y Extension Cable, Black USB 3.0 Male to Dual USB Female Extra Power Data Y Extension Cable for 2.5" Mobile Hard Disk, Two USB female connector, One is for USB 3.0 power and data, another one for USB 2.0 power only. Black USB 3.0 Male to Dual USB Female Extra Power Data Y Extension Cable for 2.5" Mobile Hard Disk Two USB female connectors,One is for USB 3.0 power and data, and another one is for USB 2.0 power only. Does one USB port not supply enough power for your USB device?
The STC-I008, 10-meter Active USB 3.0 Extension Cable, offers one USB type-A (male) connector and one USB type-A (female) connector and provides an active extension of USB 3.0 devices of up to 5 meters (6 feet). An all-in-one cable for overcoming distance restrictions as well as power source limitations; the active USB 3.0 extension cable incorporates bus-powered active circuitry to ensure performance beyond the length limits of standard USB cables. Up to 2 of these cables can be daisy-chained together, allowing the connection to be extended a total of 20 meters. If necessary, the USB device can be powered from a wall outlet using the Universal AC power adapter provided with the cable. The STC-I008 extension cable (USB Extender) supports high-speed USB 3.0 transfer rates of up to 5Gbps and is backed by 2-year Warranty.
The STC-C019 10-foot USB Extension Cable (A-A) features 1 USB A male connector and 1 USB A female connector, extending the connection between USB 2.0 devices by up to 10 feet - an ideal solution for better placement of peripheral devices, or adding flexibility to existing USB ports. This high-quality USB extension cable is fully rated for use with USB 1.1 and USB 2.0 devices. and is backed by Lifetime Warranty.
