Chamber body: Chamber body atmosphere: General atmosphere:0-0.25 bar Max atmosphere 0.35 bar Size of the chamber body: 700*2100 mm Max stop atmosphere/ restart atmosphere: The main controller will stop automatically stop if the atmosphere has reached 0.35 bar and will restart if the atmosphere is lower than 0.15 bar Max oxygen density to stop: The oxygen generator will stop is the density is higher than 27% Noise of the compressor: 60 dB average Flow of the compressor: 4-6.6 m3/h Compressor rate: 420W Main Controller: Weight of the main controller 60 KG Controller size: 62*65*107 cm Oxygen density: 82%-96% Oxygen flow: 3-6 L/min Input power: AC 220V( 10%) 50/60Hz Working temperature: -10-40 20-85% relative humidity Storage temperature: -20-60 Ozone Generator: Input power: AC 220V Frequency: 50 Hz Ozone Generation: 500 mg/h Ozone medium: Air Ozone generation Method: Tubular discharge Rated power: 22 VA Ozone density 0.2mg/m3 Sterilization time: Each time 5 min
used solar modules with 100,000pcs, 310Watts/pc, CNF Karachi, U$30/pc
Standard: China Yy 0469-2011 Bfe (bacterial Filtration Efficiency) >=95% Pfe(submicron Particle Filtration Efficiency)>=30% Fluid Resistance 120mmhg
STANDARD: CHINA YY/T 0969-2013 BFE (BACTERIAL FILTRATION EFFICIENCY) >=95% PFE(SUBMICRON PARTICLE FILTRATION EFFICIENCY) / Fluid Resistance /
factory wholesale: Packing: 2000pcs /ctn KN95 Face mask MOQ:10000pcs Certificate: CE FFP2
It is recommended that you buy the KN95 mask of GB2626-2006. On the one hand, this mask has a good protective effect and can be used for three to five days. On the other hand, please leave the medical surgical mask (general surgery) and GB19083-2010 medical grade N95 mask (for virus infection treatment) to the frontline medical staff. The effect of textile liquid splashing is most important to them. Ordinary people can prevent airborne transmission (light discharge from patients with droplets). The reason why doctors use only GB19083-2010 is because this is produced in accordance with medical standards. It has the effect of blocking blood and splashing a large amount of liquid. It is enough for ordinary people to buy KN95 masks of GB2626-2006. Ordinary people mainly prevent airborne transmission (droplets in the air or slight discharge from patients)
Features 1. Price efficiency 2. No natural latex ingredients, no allergic reaction to human body 3. Ambidextrous, Excellent Tensile-strength, Durable and Good adhesion
Features: 1. No protein, no natural latex ingredients, no allergies, degradable, can add pigments 2. Ambidextrous, Excellent Tensile-strength, Durable and Good adhesion 3. Anti-static 4. Anti-acid, anti-alkali, wear-resistant, oilresistant corrosion, and does not carry static electricity
Features: 1. No protein, no natural latex ingredients, no allergies, degradable, can add pigments 2. Ambidextrous, Excellent Tensile-strength, Durable and Good adhesion 3. Anti-static 4. Anti-acid, anti-alkali, wear-resistant, oil-resistant corrosion, and does not carry static electricity 5. Longer and Thicker protection upgraded
Price of product: FOB US$4.8/boxes, CIF US$5.4 Term:100%L/C subject to change Product origin: China Key Specifications/Special Features: CE and FDA Minimum Order Size: 3x40HC around 100k boxes, Negotiable. Packaging details: 100pcs/box, 10boxes/Carton, around 31500 boxes per 40HC
Air filter compressed air filter 1). Separator filter (HF9) For bulk liquid removal plus a 3 micron coalescer (5ppm w/w maximum remaining oil content) Two-stage filtration * First stage: two stainless steel orifice tubes provide 10 micron mechanical separation * Second stage: in-depth fiber media captures solid and liquid particles to 3 micron 2). Air line filter (HF7) For removal of liquid water and oil; removes solid particles to 1 micron (1.0 ppm w/w maximum remaining oil content) Corrosion resistant inner and outer cores Two-stage filtration * Firt stage: captures larger particles with alternate layers of fiber media and media screen * Second stage: coalesces aerosols and captures solid particles with multiple layers of epoxy bonded, blended fiber media 3). High efficiency oil removal filter (HF5) For coalescing fine water and oil aerosols; removes solid particles to 0.01 micron (0.01 ppm w/w maximum remaining oil content) Corrosion resistant inner and outer cores Two stage filtration * First stage: multiple layers of bonded, blended fiber media for fine coalescence * Second stage: multiple layers of bonded, blended fiber media for fine coalescence Outer coated, closed cell foam sleeve 4). Ultra high efficiency oil removal filter (HF3) For coalescing ultra-fine oil aerosols; removes solid particles to 0.01 micron (0.001 ppm w/w maximum remaining oil content) Corrosion resistant inner and outer cores Two stage filtration * First stage: coated, closed cell foam sleeve acts as pre-filter and flow disperser * Second stage: multiple layers of matrix blended fiber media for ultra-fine coalescence Outer coated, closed cell foam sleeve 5). Oil vapor removal filter (HF1) For removal of oil and hydrocarbon vapors normally absorbable by activated carbon; removes solid particles to 0.01 micron (0.003 ppm w/w maximum remaining oil content) Corrosion resistant inner and outer cores Two stage filtration * first stage: stabilized bed of finely divided carbon particles removes the majority of the oil vapor * Second stage: multiple layers of fiber media with bonded micro fine carbon particles remove the remaining oil vapor Multiple layers of fine media prevent particle migration Outer coated, closed cell foam sleeve prevents fiber migration Designed life is 1000 hours under rated conditions.
Air dryer(desiccant air dryer) hsd-10wxf Desiccant compressed air dryer (heatless purge and externally heated purge) 1). Heatless purge desiccant air dryer Inlet temperature: 0~45 celsius degree Inlet oil content: 0.01ppm Working pressure: 0.6~1.0mpa Dew point: -20~-70 celsius degree Purge air: 12% Desiccant: activated alumina & molecular sieve Purge mode: heatless purge Working method: continuing alternation between two towers Working periods: t=10~20min. Control mode: micron computer auto controlling Installation mode: indoor, non-basement 2). Externally heated purge air dryer Inlet temperature: 0~45 celsius degree Working pressure: 0.6~1.0mpa Dew point: -40~-70celsius degree Purge air: 4~6% Desiccant: activated alumina & molecular sieve Purge mode: externally heated purge Working method: continuing alternation between two towers Working periods: t=120~140min. Control mode: micron computer auto controlling Installation mode: indoor, non-basement
Sterile filter * adopt 6 grades element which complement with America UPS plastic biology * element material is SPF who is good at hydrophobe, precision to be 0.01um.It can filter bacterium, virus & phagocyte. * o ring seal (silica rubber and fluorine rubber), ensuring to filter air 100%. * unique outer heat-resistant polypropylene.It can stand 140 celsius degree steam bacterium removal and will not reduce its precision if repeat sterilizing. * stainless steel of housing, polishing of internal, max.Working pressure to be 1.0mpa. * operation temperature less than 80 celsius degree .
Inlet pressure: 0.6~1.0Mpa Inlet temperature: 5~65 celsius degree Initial pressure drop: less than 0.005Mpa Filter route: 5um Water removal rate: less than 99% Outlet air oil content: less than 10ppm
Low Dew Point Combined Compressed Air Dryer Working pressure: 0.6~1.0Mpa Pressure drop: less than 0.05Mpa Inlet temperature: less than 45 celsius degree (Normal temp. type) Inlet temperature: less than 80 celsius degree (High temp. type) Dew point: -40~ -70 celsius degree Cooling watre temperature: less than 32 celsius degree (water cooling type) Purge air: 3~5% Control mode: Micro-program controller Installation mode: Indoor, non-basement
Desiccant Compressed Air Dryer two types ---heatless purge and externally heated purge 1). Heatless purge desiccant air dryer Inlet temperature: 0~45 Celsius degree Inlet oil content: less than 0.01ppm Working pressure: 0.6~1.0Mpa Dew point: -20~-70 Celsius degree Purge air: less than 12% Desiccant: Activated alumina & molecular sieve Purge mode: Heatless purge Working method: Continuing alternation between two towers Working periods: T=10~20min. Control mode: Micron computer auto controlling Installation mode: Indoor, non-basement 2). Externally heated purge air dryer Inlet temperature: 0~45 Celsius degree Working pressure: 0.6~1.0Mpa Dew point: -40~-70 Celsius degree Purge air: less than 4~6% Desiccant: Activated alumina & molecular sieve Purge mode: Externally heated purge Working method: Continuing alternation between two towers Working periods: T=120~140min. Control mode: Micron computer auto controlling Installation mode: Indoor, non-basement
Covid 19 Protective Product Price List; NINGBO SHIMAOTONG INTERNATIONAL CO.,LTD, China; Valid 2020/4/30 Payment terms 100% AD; * Can provide freight to the destination port, but does not provide customs clearance service at the destination. 1 Chaomei KN95 Mask GB2626-2006, EN149 1.63 10,000 ; 2 Chaoxia KN95 Mask GB2626-2006 1.62 300,000; 3 Benlai KN95 Mask GB2626-2006,FDA Authorized, EN149 1.92, EN149:2001+A1:2009,FDA owner number10064235 500,000; 4 Daddybaby KN95 Mask GB2626-2006�¯�¼?FDA Authorized 1.36 FDA registration number3007698283 600,000; 5 JianXiang Disposable Medical Mask, CE Compliance, TUV-ENISO13485 0.38 400,000; 6 AAB Disposable Medical Mask, EN14683 test,TYPE I,FDA owner number10031023, 0.38, Donated materials designated by the Ministry of Health of the Philippines, 200,000 7 AAB, Disposable protective mask, EN149,GB/T32610- 2016,FDA owner number10031023 , 0.31, Donated materials designated by the Ministry of Health of the Philippines, 300,000; 8 Geostar Se-10 goggles (anti fog) EN166:2001,CE2834 2.10; 9 Geostar FS-1 mask (anti fog) ANSI Certification 1.12; 10 Geostar FS-2 mask (anti fog) ANSI Certification 2.10; 11 Co-Healthy , Infrared frontal temperature gun CE, EN61010,EN61326 34.32; 12 EBT ,Infrared frontal temperature gun CE 36.72; 13 HeZhiZhou Infrared frontal temperature gun, CE 25.56, Infrared temperature measurement without contact and product without radiation; 14 TESTSEELABS Test kit, colloidal gold method CE 5.64; 15 GIKO N95 mask 1200H 4.11
STANDARD: CHINA YY0469-2011 STANDARD: CHINA YY 0469-2011 technical requirements BFE (BACTERIAL FILTRATION EFFICIENCY) >=95% PFE(SUBMICRON PARTICLE FILTRATION EFFICIENCY)>=30% Fluid Resistance 120mmHg Disposal Medical surgical mask (Non-sterile) 20 pcs / bag, 250 pcs / carton, 5000 pcs / carton; Carton size: length 650X width 440X height 380mm; Weight: 19kg / carton capacity: 600,000pcs/month Certificate: CE, FDA price negotiation is acceptable.
3 ply Face Mask. MOQ 10,000
FACTOR WHOLE SALE CAPACITY: 3000000/MONTH PACKING 2000PCS / CARTON CARTON SIZE: 62CM*52.5CM*42 WEIGHT: 6.5KGS
