Introduction and features 1.Material: PP 2.Brand: WHB 3.Sterilized by gamma irradiation 4.Available with 2 sizes of 15,50ml 5.Black or white silk screen scale, clear lines. Large white marking area. 6.Can be one-handed operation, easy-spin tube cover, good sealing. 7.The maximum can withstand 12000 xg centrifugal force 8.The temperature range is -80 ° C to 120 ° C 9.Products can be held for single or multi-tube packaging 10.Dnase/Rnase and pyrogen free
Information and feature 1.Material:LDPE 2.Long flexible stem can be bent to draw liquid from narrow or small volume tubes into the bulb 3.Offer the aspirating precision of a glass pipet and the safety benefits of plastic 4.Available with 7 length of 65,80,148,150,160,176,180mm. 5.Sterilized by gamma irradiation or EO 6.Strict consistency tested
1. Material:PP 2. Brand:WHB 3. Sterilized by gamma irradiation 4. Available for 0.2ml and 0.5ml module specifications of the PCR instrument 5. The smooth surface of the the wall ensures the effectiveness and uniformity of the heat transfer between the samples 6. The tube cover is excellent in sealing property, and the opening cover is smooth 7. Matte tube cover surface, easy to tag, easy to operate 8. Dnase/Rnase and pyrogen free
Introduction and features 1.Material:Polystryrene +Borosilicate glass 2.Brand:WHB 3.Sterilized by gamma irradiation 4.Dnase/Rnase and pyrogen free 5.Glass thickness:0.17mm +- 0.02mm 6.Available with 4 different pore size of 10,14,20,30mm 7.Borosilicate glasses is with high homogeneity, low bubble and inclusion content. 8.Medical grade shadowless glue, high transparent achromatic 9.Suitable for fluorescent microscope experiment , confocal microscopy and phase-contrast microscopic experiment , etc. 10.Suitable for all living cells' examinations 11.Subdivided version enables simultaneous multiplex analysis 12.Dish surface is smooth and free from striation to maximize usable area for growth 13. The rim on upper side of the lid mates with the dish brim for easy and secure stack 14.Lids with several little chimbs to shape vents are available for very effective gas exchange
1.Available in 3 mesh sizes, 40 µm, 70 µm, and 100 µm 2.3 different colors: bule,white, and yellow, for easy identification 3.Improved uniformity of single cell suspensions 4.Made of a strong nylon mesh with evenly spaced mesh pores 5.The extended lip on the strainer enables aseptic handling with forceps 6.Design to fit perfectly into different conical tube 7.Ready-to-use, sterilized by gamma irradiation 8.Individually packaged 9.DNase-& RNase-free 10.Non-pyrogenic
1.Material:TPE(blade)+ABS(Skillet) 2.Elastic material,blade soft touch 3.Blade angle can be adjusted 4.Sterilized by gamma irradiation or EO 5.DNase-& RNase-free Non-pyrogenic
1.Material:GPPS 2.Brand:WHB 3.Available with 6 capacities of 1,2,5,10,25,50ml 4.Graduations are calibrated for accurate dispensing to within ±2% 5.1.0,2.0,5.0,10.0ml are stretched, while 10.0, 25.0, 50.0ml are ultrasonically welded at tip and mouth-piece 6.Different color ring for easy identification 7.Bidirectional graduations on the pipets provide added applicability 8.Negative graduation allows additional working volume 9.All pipets are supplied with a filter plug 10.Strict consistency tested Non-pyrogenicAvailable with gamma irriadiation steriliaed or non-sterilized.
1.Material:Coverslip 2.Brand:WHB 3.Sterilized by gamma irradiation 4.Dnase/Rnase and pyrogen free 5.Thickness:0.9-1.1mm 6.Available with 3 different surface type of Matte,White,Colorful Painted 7.TC treatmentBoth sides can use,avoid experimental error
1.Material:Coverslip 2.Brand:WHB 3.Sterilized by gamma irradiation 4.Dnase/Rnase and pyrogen free 5.Thickness:0.17mm 6.Avaliable with 2 different shapes of Round and Square 7.TC treatment Both sides can use,avoid experimental error 8.Has been processed,has been sterilized,open package,you can use 9.High-strength,soak for 1 week will not fragment.
1.Material:PS(Polystyrene) 2.Brand:WHB 3.Sterilized by gamma irradiation 4.Dnase/Rnase and pyrogen free 5.Available with 3 different growth areas of 50ml(25cm2),250ml(75cm2),600ml(175cm2) 6.Flasks surface is flat and free from striation to maximize usable growth area 7.2 different cap styles (Seal and Breathable) can be used in both open and closed systems. 8.breathable cap have 0.2um hydrophobic menbrane,conducive to exchange gas,prevent microorganisms. 9.Innovative angled neck design offers good pipet and cell scraper access in 10.Upper triangular and wider base shape provides stability 11.Protrudent ridge on the back side of the flask makes it easy for stacking 12.Special area near the neck for easy mark writing 13.Both flask sides have engraved graduationStrict integrity tested
1.Material:Hydrophobic PP 2.Brand:WHB 3.Can simultaneously nurture five kinds of antibodies, improve the efficiency of the experiment 4.Can be applied to western-blot the experimental process 5.Non-toxic, anti-drop, anti-corrosion, long service life 6.The bottom of the smooth, ultra-low adsorption, hydrophobic, saving antibodies
Test tube Code Description MDS-TT001 15X100mm MDS-TT002 13X100mm MDS-TT003 13X78mm MDS-TT004 12X60mm MDS-TT005 12X75mm MDS-TT006 12X78mm MDS-TT007 16X53mm with cover MDS-TT008 14X41MM with cover MDS-TT009 5ml graduated tube with cover MDS-TT010 2ml hemopexis tube with cover MDS-TT011 2ml hemopexis tube tube MDS-TT012 BD tube MDS-TT013 Six edges tube MDS-TT014 MLA-E-750tube MDS-TT015 5ml conical tube MDS-TT016 12ml conical tube with cover MDS-TT017 urine tube MDS-TT018 olympus AU tube MDS-TT019 olympus AU cup MDS-TT020 Holland weituson tube MDS-TT021 12X75m PP tube MDS-TT022 13X1000mm swab tube MDS-TT023 12X75mm swab tube
Main Technical Parameter: Model TH-100 TH-225 TH-500 TH-800 TH-1000 Internal dimension (mm) 450*450*500 500*600*750 800*700*900 800*1000*1000 1000*1000*1000 Overall dimension (mm) 1050*880*1440 1050*1020*2000 1320*1320*2170 1470*1520*2315 1670*1520*2315 Technical structure Temperature range -20~+150 Low type : -40 :-60 : -70 Humidity range 20% ~ 98% RH Temperature fluctuations ± 0.5 Temperature deviation ± 2.0 Humidity deviation ± 2.5% RH Heating rate 3 / min Cooling rate 1 / min Control system Controller 5.7" programmable color display touch screen controller Controller optional languages are English, German, French, Russian, Spanish, Korean, Japanese. PC Link with software, R-232 interface Temperature Sensor PTR Platinum Resistance PT100O/MV A-class Temperature Resolution ± 0.001 Humidity sensor Dry and wet bulb sensor Humidity Resolution ± 1%RH Heating system Independent Nichrome electronic heating system Cooling system French TECUMSEH compressor Humidification system External isolation, stainless steel surface evaporation humidifier Dehumidification system Evaporator Water supply system Automatic water supply, Water purification system, Water saving Circulatory system Cold resistance and low noise centrifugal wind wheel Material Exterior material Steel Plate with protective coating Interior material SUS304 stainlesssteel Insulation window Double thermostability silicone rubber sealing Standardconfiguration 1 Cable hole (F 50,) cover, 2 sets of shelf, 2 protector tubes, 1 overflow water tube,1 copy of operating specification Timing Function 0.1~999.9 (S,M,H) settable Power Supply AC220V/AC380V 50HZ Three-phase five little system Ambient Temperature 5~+30 =85% RH Standard IEC60068-2-1;IEC60068-2-2;GB/T2423.1-2001; GB/T2423.2-2001
SL200K series, developed by USA KINO in terms of its long-term experience, are standard drop shape analysis based interface chemical analytical instruments. Their modularized design makes tens of thousands of possible different combinations available, which is undoubtedly your above-all choice for the high precision and accuracy in interface chemical analysis. The integrated instrument consists of sophisticated optical mechanism, optical vision system, high-precision dosing system as well as CAST 3.0-USA KINOs professional interface chemical analytical software. SL200K series are applicable to measure static / dynamic contact angle, surface free energy of solid and its distribution (dispersive force, polar force and hydrogen bond force, etc.), interface tension of liquid-gas / liquid-liquid as well as interface viscidity & elasticity of liquids (oscillating and expanding drop), etc. We provide clients cost-effective instruments with best performance - the most professional contact angle meters & interfacial tensiometers and technical assurance in R&D and quality control.
Lying Hyperbaric Oxygen Chamber Lying hyperbaric chambers are portable devices designed for hyperbaric oxygen therapy, allowing users to lie down comfortably while receiving treatment. These chambers are particularly suitable for home use, offering various features that enhance safety and comfort. Lying hyperbaric chambers are primarily used for therapeutic purposes, including: - Treatment of decompression sickness - Healing of chronic wounds - Recovery from infections - General health and wellness improvements through increased oxygen supply to tissues.
Multiplace Hyperbaric Oxygen Chamber Multiplace hyperbaric chambers are large medical devices designed to treat multiple patients simultaneously. They are typically used in hospital settings and can accommodate anywhere from 2 to 20 patients, depending on the specific chamber design. Features Capacity: Multiplace chambers can hold multiple patients at once, making them cost-effective for facilities that treat many individuals. The chambers are constructed from materials like steel or aluminum and can be pressurized up to 6 ATA (atmospheres absolute) using compressed air. Patients breathe 100% oxygen through hoods or masks during treatment. Design and Functionality: These chambers are designed to allow medical staff to enter and assist patients during treatment. They often include advanced features such as automated systems for pressurization and ventilation, ensuring a controlled environment for therapy. Some chambers have compartments for different patient needs, such as intensive care. Comfort and Use: While multiple chambers allow for simultaneous treatment, some patients may find the use of hoods or masks uncomfortable.
Monoplace Hyperbaric Oxygen Chamber Monoplace Hyperbaric Chambers are small chambers for hyperbaric oxygen therapy for a single patient. Our Monoplace Hyperbaric Chambers are available in different types, and the patient can enter these chambers in a sitting, standing or lying position. Single-occupancy chambers are usually pressurized with medical oxygen for hyperbaric oxygen therapy. In this case, the patient does not need to use a mask. Upon customer request, these chambers can be equipped with an additional system that allows the use of a mask inside the chamber, so that the patient can take air breaks during the hyperbaric oxygen therapy session, breathing air through the mask. These chambers are called "hybrid chambers". Hyperbaric oxygen therapy involves breathing pure oxygen in a pressurized chamber or chamber. When body tissues are injured or damaged, they need more oxygen to survive. Hyperbaric oxygen therapy increases the amount of oxygen carried by the blood; the increase in blood oxygen promotes tissue healing and helps fight infection because blood gases are temporarily returned to normal levels. Hyperbaric oxygen therapy is used to treat a variety of conditions.
Medical Hyperbaric Chamber Medical Hyperbaric Chamber is designed to meet the growing demand for hyperbaric oxygen therapy. Our chamber is engineered to provide high-quality care to patients with various medical conditions, delivering increased oxygen levels to promote faster healing and recovery. These chambers deliver 100% pure oxygen at pressures significantly higher than normal atmospheric pressure, often under the supervision of medical professionals, typically at pressures of 2 to 3 times the normal atmospheric pressure, in a controlled and monitored environment. This high concentration of oxygen enhances healing processes at the cellular level. Hyperbaric Chambers In Medical Applications Our Medical Hyperbaric Chamber stands out with its cutting-edge technology, ensuring a safe and efficient experience. Itâ??s perfect for medical facilities looking to expand their treatment capabilities and offer an effective solution for conditions like: Severe anemia Brain abscess Air embolism (air bubbles in blood vessels) Burns Carbon monoxide poisoning Crush injuries Sudden hearing loss Decompression sickness Gangrene Skin or bone infections leading to tissue death Non-healing wounds, such as diabetic foot ulcers Radiation injury Skin grafts or flaps at risk of tissue death Sudden, painless vision loss
The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) < Basic testing methods of Glow wire, basic testing methods of Glow wire device>, UL 746A, IEC829, DIN695 and VDE0471. What is glow wire test? The Glow wire tester ZRS-3H/ZRS-3HS is suitable for resistance to abnormal heat and fire test on lighting lamps, electronic products and household appliances. It uses high-temperature coating spraying on steel structure and imported instrument display, with easy operation and stable performance. The glow wire testing equipment is applicable to flame resistance test of all levels of QC departments and corresponding enterprises. Specifications: Heating temperature: adjustable continuously within the range of 25~1100C, the accuracy of temperature is 1C, the resolution of temperature is ±3C Glow-wire time: 0.1-999.9s±0.1s(time range is adjustable) Ignition time: 0.1-999.9s, auto record, manual pause Flame-out time: 0.1-999.9s (auto record and manual pause) Glow wire pressure on test specimen: 1±0.2N. Limiting pressure depth is 7mm Glow wire: 4 nickel (80) and chromium (20) Made in specific dimensions. Thermocouple: �?0.5 armored nickel & chromium/nickel-chromium wire, K Type. Automatic departure: While reaching specified glowing time, test specimen will depart from glow wire automatically. To save the delivery cost for the oversea market, LISUN designed a compact version glow-wire tester weighing less than 50kg. (Customer need to prepare additional ventilation system for ZRS-3HS)
laboratory centrifuges, medical equipment, heamatocritic centrifuges, blood bank centrifuges, high speed centrifuge, low speed centrifuge, refrigerated rentrifuge, micro centrifuges, bench top centrifuge, floor centrifuge, vortex, shaker and other laboratory instruments.Export
