Shanghai Iron Bars Suppliers and Manufacturers

High purity iron billet,electric steel, electric magnetic iron, ultra low carbon magnetic iron bar,soft magnetic iron bar SUYB-1, Pure iron(SAE AMS 7707C Iron) ingot iron, iron billet,soft iron, Armco Pure iron, iron remelt ingot, Melting Grade Pure Iron Billet,ASTM A848 magnetic iron(alloy 1), were supplied by us, The chemical composition and physics characteristics, such as the coercive force is better than the International Standard. Our fabrication plant is equipped with large cutting machine, shearing machine, sawing machine, punch, lathe, mill machine, annealing furnace, and rattle barrel to meet the different needs of users. We check and audit the quality according to the quality certificate strictly. Trademark B-B: C 0.003 Si 0.01 Mn 0.13 P 0.009 S 0.006 Cr 0.02 Ni 0.02 Al 0.03 Cu 0.02 Trademark B-BC: C 0.002 Si 0.01 Mn 0.08 P 0.006 S 0.005 Cr 0.01 Ni 0.01 Al 0.01 Cu 0.01 Trademark B-CC: C 0.002 Si 0.003 Mn 0.02 P 0.005 S 0.005 Cr 0.01 Ni 0.01 Al 0.005 Cu 0.004 application: a.make it in electric core.heel piece, gag bit in electric appliance device,telecommunication b.Electric core of electric iron c.Electromagnetic part of instruments and meters d.Iron core and shell of direct-current dynamo e.Electric part or magnetic part for car,tractor,lathe f.Magnetic shielding apparatus Charateristic 1 .good electromagnet character.Coercive force(Hc)low,high magnetic permeability. high saturation induction density Bs .stable magnet and no magnetic aging 2 high pure,electric pure iron,is full killed steel,refine,so the density is high,average,good,little gas, this is a reliable condition that customer simplify and cut down the anneal process of the parts. 3 cold drawn,hot roll,forge.Cold process,these is no problem such as lathe,drill,punch,bend,drawn.Hot process,such as forge,roll,there is little redsear sensibility,it is a good condition for doing in a large degree scope. International standard trademark coercive force Hc A/m oe not more than coercive force aging Hc A/m oe not more than Max.magnetic conductivity H/m Gs/Oe * not less than magnetic strength T Gs not less than B-A 48.0 0.6 4.8 0.06 11.3 9000 B200 B300 B500 B1000 B2500 B5000 B10000 1.20 12000 1.30 13000 1.40 14000 1.50 15000 1.62 16200 1.71 17100 1.80 18000 magnetic aging:keep 100 degree for 100 hours or Condition is 790 degree after 2 hours, after cooling with the furnace.

we supply Iron Cathode.The chemical composition and physics characteristics, such as the coercive force is better than the International Standard. Our fabrication plant is equipped with large cutting machine, shearing machine,sawing machine, punch,lathe,mill machine,annealing furnace,and rattle barrel to meet the different needs of users.We check and audit the quality according to the quality certificate strictly. chemical composition(%,max) Trademark B-B: C 0.02 Si 0.10 Mn 0.16 P 0.02 S 0.012 Type[mm]: Medium plate and steel billet(3-250),plate coil(12-25),straight round steel(dia6.5-dia300),round steel coil, cold drawn plate coil(0.5-2.5)etc. We can produce the special type which you ask Application: The raw material of maki g electrolytic aluminium , the protection of copper alloys of heat exchanger, fresh water facility, desalination plant (evaporator, brine heater) and condenser (used for marine and platform) Physical character: electrical resistivity: 11-13*10-8Ω�m temperature:20 degree permeation rate: 0.025mm/h

Continuous casting iron bar, grey casting iron, ductile iron.Transportation, clearence service

High purity iron billet, electric steel, electric magnetic iron, ultra low carbon magnetic iron bar, soft magnetic iron bar suyb-1, pure iron(sae ams 7707c iron) ingot iron, iron billet, soft iron, armco pure iron, iron remelt ingot, melting grade pure iron billet, astm a848 magnetic iron(alloy 1), were supplied by us, the chemical composition and physics characteristics, such as the coercive force is better than the international standard. Our fabrication plant is equipped with large cutting machine, shearing machine, sawing machine, punch, lathe, mill machine, annealing furnace, and rattle barrel to meet the different needs of users. We check and audit the quality according to the quality certificate strictly. Chemical composition %, max Trademark b-b: C 0.003 si 0.01 mn 0.13 p 0.009 s 0.006 cr 0.02 ni 0.02 al 0.03 cu 0.02 Trademark b-bc: C 0.002 si 0.01 mn 0.08 p 0.006 s 0.005 cr 0.01 ni 0.01 al 0.01 cu 0.01 Trademark b-cc: C 0.002 si 0.003 mn 0.02 p 0.005 s 0.005 cr 0.01 ni 0.01 al 0.005 cu 0.004 Trademark B-CE C 0.002 Si 0.003 Mn 0.02 P 0.005 S 0.005 Cr 0.01 Ni 0.01 Al 0.005 Cu 0.004 Ce 0.2 min Trademark B-CL C 0.002 Si 0.003 Mn 0.02 P 0.005 S 0.005 Cr 0.01 Ni 0.01 Al 0.005 Cu 0.004 La 0.2 min Appliance of trademark from b-b to b-cc : The raw material of all kinds precise alloy(super alloy), electric alloy, soft magnet, amorphous alloy and permanent magnet such as ndfeb etc.

Trademark b-b: C 0.003 si 0.01 mn 0.13 p 0.009 s 0.006 cr 0.02 ni 0.02 al 0.03 cu 0.02 Trademark b-bc: C 0.002 si 0.01 mn 0.08 p 0.006 s 0.005 cr 0.01 ni 0.01 al 0.01 cu 0.01 Trademark b-cc: C 0.002 si 0.003 mn 0.02 p 0.005 s 0.005 cr 0.01 ni 0.01 al 0.005 cu 0.004 Type mm : Medium plate and steel billet 8-250 , plate coil 12-25 , straight round steel dia6.5-dia300 , round steel coil, cold drawn plate coil 0.5-2.5 tube, etc. We can produce the special type which you ask Applications High purity iron is used largely as the basic material for (re-)melting of low-carbon, Stainless and acid-resistant steels, materials with a high nickel content, magnetic alloys as well as stainless and heat resistant steel castings in induction and vacuum furnaces. High purity iron is also used in many applications of aviation construction, nuclear Technology, the production of magnets (pole cores, yokes and armatures), in automotive construction, as magnetic shielding, as welding rods and fuse wire, as gasket in the chemical and petrochemical industry, power station construction, as anti-corrosion anode and as galvanizing tank including equipment. Mechanical properties Brinell hardness (hb) High purity iron Max. Typical Cold-rolled strip / sheet 105 90 Hot-rolled strip / plate 105 90 Quarto plate 100 90 Round bar 110 95 Electrical and magnetic properties Characteristics typical values Initial permeability 300 – 500 Permeability 3500 - 6000 Coercive force 60 – 120 a/m Saturation induction 2.15 t Density at 20 °c 7.86 kg/dm³ Melting point 1536 °c Linear expansion coefficient Temperature range 0 – 100 °c 12x10-6 1/°c Modulus of elasticity 207 kn/mm²

High purity iron billet, electric steel, electric magnetic iron, ultra low carbon magnetic iron bar, low carbon steel, soft magnetic iron bar suyb-1, pure iron(SAE AMS 7707C iron) ingot iron, iron billet, soft iron, armco pure iron, iron remelt ingot, melting grade pure iron billet, ASTM A848 magnetic iron(alloy 1), iron cathode, electrolytic iron.

chemical composition % max Trademark B-B: C 0.003 Si 0.01 Mn 0.13 P 0.009 S 0.006 Cr 0.02 Ni 0.02 Al 0.03 Cu 0.02 Trademark B-BC: C 0.002 Si 0.01 Mn 0.08 P 0.006 S 0.005 Cr 0.01 Ni 0.01 Al 0.01 Cu 0.01 Trademark B-CC: C 0.002 Si 0.003 Mn 0.02 P 0.005 S 0.005 Cr 0.01 Ni 0.01 Al 0.005 Cu 0.004 Appliance of trademark from B-B to B-CC : The raw material of all kinds precise alloy(super alloy),electric alloy,soft magnet,amorphous alloy and permanent magnet such as NdFeB etc.

Iron Economical iron for hotel or home use.

Stainless steel, iron ore, Ferro alloy, re bar, round bar, wire rod, flat products, coated sheet, pipe and tube.Logistics

Stainless steel, seamless pipes, welded tubes & pipes, angle iron, hot-rolled round bars, hard-drawn straight straps , flange flat bars, v-iron, hex iron.

We could supply aluminum cold draw and extruded bar and rod and square bar by standard GB/T3191, ASTM B221, ASTM B211, BS1474, ISO209, EN573 and JISH4000 1. Standard: GB/T3191, ASTM B221, ASTM B211, BS1474, ISO209, EN573 and JISH4000 2. Grade: 1xxx, 2xxx, 3xxx, 5xxx, 6xxx, 7xxx, 8xxx series 3. Temper: O, F, H112, T4, T6 4. Size: Dia 6-400mm

Titanium bar

Titanium bars, titanium rods, : Ablti corporation(abl titanium) manufactures titanium round bars, titanium square bars, titanium hexagon bars, titanium flat bars for aircraft turbines, engine components, aircraft structural components, aerospace fasteners, high-performance automatic parts, marine applications, sports equipments. Medical device, automobile manufacturing industry, marine manufacturing, chemical industry, etc. Ablti corporation, abl titanium is an iso9001:2008 by bureau veritas(ukas quality management)certificated company, one of the biggest titanium manufactories and suppliers in china. Standard: astm b348, asme sb348, astm f67, astm f136, ams 4921, ams 4924, ams4926, ams 4928, ams 4930, ams 4931, ams 4950, ams 4957, ams 4958, ams 4963, ams 4964, ams 4965, ams 4967, ams 4970, ams 4971, ams 4972, ams 4974, ams 4975, ams 4978, ams 4979, ams 4981, mil-t-9047, din, bs, jis, gb/t, iso, etc. Grade: gr1, gr2, gr3, gr4, gr5, gr6, gr7, gr9, gr11, gr12, gr23, (1) titanium round bar size (mm): diameter 5-350; max length: 6000mm; (2)titanium square bar size (mm): side 6-30; max length: 6000mm; (3)titanium flat bar size (mm): side 6-30; other side: 12.7-100; max length: 6000mm; (4)titanium hexagon bar size (mm): max sw 85; max length: 6000mm;

Smc supply a wide range of quality high speed steel, such as m2, m7, m35, m42, t1 and h13, etc, which are highly acclaimed by our international customers due to its durability and similar other attributes. Smc products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product i. D. And quality information. 1)smc standard 2)customization

Grade: Q195, Q235, Q345 Techniques: hot-rolled Length: 6-12m as customized

Iron oxide red is used as dye or colorant in various prefabricated concrete parts and architectural products and materials. It is directly added into cement to color up various indoor and outdoor cement surfaces, i.E. Walls, terraces, ceilings, pillars, corridors, roads, car-park, stairs, stations, etc, as well as various building ceramic and glazed ceramics, i.E. Facing bricks, floor tiles, roofing tiles, panels, terrazzo, mosaic tiles, artificial marbles, etc. Package 1.25kg (1) 25kg in woven bag lined with plastic and 3 layers kraft bag (2) 25kg in woven bag lined with plastic. (3) 25kg in 4 layers kraft bag 20" container: 20 tons red, black; 20" container: 12.5 tons yellow 2.Ton package (1) red, black 25kg¡¡§¡é40pieces+ wood tray +pvc thermal shrinkage film . Yellow25kg¡¡§¡é20pieces+ wood tray +pvc thermal shrinkage film . (2) red, black 900kg, 1000kg opening container bag+wood tray +pvc thermal shrinkage film. Yellow 500kg opening container bag + wood tray +pvc thermal shrinkage film. (3) yellow625kg/pieces opening container bag +pvc thermal shrinkage film.It is for bulk cargo.20" container: 20 tons red, black; 20" container: 10 tons yellow 3.Bag package (for bulk cargo) Red, black 25kg¡¡§¡é40pieces in a bag yellow25kg¡¡§¡é20pieces in a bag 25kg¡¡§¡é25pieces in a bag 3.Application: 1)used for coloring of construction, paints, plastic rubber, printing ink, porcelain, colour asphaltum, paper dyes, ect. 2)the construction material including metope, ground and marble. And the painting material including oil paint, antisepsis, spray, mosaic bricks, for concrete production, bricks used in pavement, colorful tiles, ect. 3)plastic including thermoset, thermoplasticity plastic coloring, and plastic racetrack, ect.

Ironing table Model: qbtp-1500f Table board ironing area size: 1400x750mm / 1200x650mm / 1500x750mm With swing-buck, iron holder, hose holder & chimney Motor: 550w / 380v /3ph/50hz Cover: ht knitting + silicone foam + needle felt í¦clip & runí¦ type to save electric energy Fan-wheel is regulated for movement balance Other choice: Qstp-1400f Qjtp-1200f Qbtp-m1100 Qftp-m900 Oqb-p12/86ba Carton