Features It adopts a frame-type design to connect the whole line. It has high stability and the heating part is a stainless steel heating tube, which is suitable form as shrink packaging for wooden flooring. Controlled by PLC, which greatly reduces the work intensity and increases production efficiency. It cuts the shrink foil to packaging width and puts the splice in the middle on one side, which presents your product particularly nicely. Combined with the dual compartment shrink tunnel, the MLY-Film delivers the best packaging results. Advantage â?¢Very solid packaging machine High packaging capacity Great packaging results Energy friendly shrink tunnel It splices the shrink film completely shut along both the longitudinal and the lateral sides. This way your parquet is completely protected against dirt, dust and moisture. Technical information Power 30KW Power Supply 380V; 50/60HZ; Packing Sizes W H 800~1380*200~400*48~120mm Packing Speed 6-8 packs/min Shrink Film PE Thickness: 0.04-0.08mm Heating Tube Stainless Steel Tunnel Temp. Room Temperature to 300 Conveyor Stainless Steel Air Source 6-7kg/cm2 Flooring dimensionsL W H 4000*1000*1550mm Crate SizeL W H 4160*1160*1800mm G./N. Weight 850/750kg
Product Description Application: washing machine Characteristics Energy saving self-regulation Rapidly temperature rising Heating power adjusts to ambient temperature and air flow Safety Reliable, long life
Dry tailings discharge is a new tailings disposal technology that has gradually emerged in China in recent years. It means that the tailings slurry output by the beneficiation process is concentrated in multiple stages and then processed by high-efficiency dewatering equipment such as dewatering vibrating screens to form a small water content. , It is easy to settle and solidify and use the slag stored on the site. The slag can be transported to a fixed location for dry storage. Dry tailings discharge equipment The main process methods are: thickening equipment + dewatering equipment + conveying equipment; the selection of process equipment and the conveying method are determined by the material properties, specific gravity, particle size distribution, processing capacity, and other index parameters of the tailings slurry, as well as on-site geographic environmental conditions. Its main significance is to ease the pressure on the storage capacity of the tailings reservoir, reduce the hidden dangers of the tailings reservoir, increase the means of reuse of tailings, and obtain a green and environmentally friendly mine system. Dry tailings discharge equipment Combination of a cyclone and dewatering vibrating screen After the tailings are concentrated by the cyclone, the underflow enters the high-frequency vibrating dewatering screen for dehydration, which can make the water content of the tailings within 16% and achieve the purpose of dry tailings. This method has good effects, low investment, and high efficiency. It is the most economical and practical method for the market. Dry tailings discharge equipment The working principle of the dewatering vibrating screen is mainly driven by dual vibrating motors, and the excitation force of the vibrating motor is used to make the material move linearly on the screen surface to achieve the screening effect. For the linear vibrating screen, the installation process of the vibrating motor is very simple, As long as the anchor bolts and the screen frame are used for fixing, the closing is to choose a suitable installation position. The installation position of the vibration motor of the dewatering vibrating screen can usually be flexibly selected from the bottom, both sides, and top of the equipment. This article will give a detailed description of the three common installation methods and different application ranges of the vibration motor of the linear vibrating screen. The user can use it as a reference in the selection and use. Vibration Motors For Dry Tailings Discharge Equipment
EDI(Electrodeionization)is a revolutionary water treatment technology ,tiis a membrane filtration and desalination technology that skillfully combined the electrodialysis technology and ion exchange technology together ,which is high-tech ,green and eco-friendly technology. EDI equipment uses the RO outlet water as feed water .The resistivity of RO outlet water is normally 40-2us/cm(25C),and the resistivity of EDI outlet water can normally reach 18MΩ.cm(25C).According to the application of deionization water and the setup of the system ,EDI outlet water can meet the requirements for resistivity of 1-18MΩ.cm(25C). The advantages of EDI equipment are continual water production ,no acid and alkali regeneration,unattended operation ,etc.It is gradually replacing the mix bed as the fine treatment equipment .Due to its environmentally friendliness and ease of use ,EDI equipment has been accepted by more and more people and widely used in pharmaceutical ,electronic,electricity,and chemical industry.Its existence is a revolutionary progress of water treatment equipment ,which marked the water treatment industry finally entered into green industry.
Negative Multistation Thermoforming Machine-Shanghai Yi You The electrothermal furnace s temperature control system adopts full computerize intelligent automatic compensation controlling, individual partition adopts digital input, has a high precision fine-tuning, temperature uniformity, fast temperature elevation(only 3 minutes from 0-400 degrees), stability (not influenced by external voltage, temperature fluctuation is less than 1 degree). MORE
Automatic Round Table Blister-Card Sealing Machine from Shanghai YiYou Full-automatic round disc blister-card welding machine Main features: l Beautiful and clever, high degree of automation, the safety and efficiency of operations. l One people is enough to operate the machine, effectively reduce the number of operating personnel. l Adjust equipment parameters, heat-sealing machine automatic falling authorities is complete, fast and accurate. l Using pneumatic way to pressure. l Using electric rotary, automatically control the rotation speed, convenient, quick, and save labor. Most suitable for locks, toys, cosmetics, small appliances and other industries packaging.
Blister Hot-Press Sealing Machine Manufacturer from Shanghai YiYou Blister hot-press sealing machine Blister sealing machine has disc type and continuous type two kinds, mainly is suitable for the software, food, cosmetics, printing, pharmaceutical and floor, ceramic, beverage, heavy metal industry in bulk packaging. Continuous blister sealing machine working principle and operating procedure: the main use of thermoplastic plastic machine heating softening, the pressure to weld plastic and paper card. Manually put the plastic blister products put paper card to heat sealed pressure molding, automatic unloading sealed products. MORE
Blister Trilateral Edging Machine Manufacturer from Shanghai YiYou Blister trilateral edging machine A complete trilateral folding, lower die tray fixed position, from the trilateral pressurized blister to finalize the design process. Principle: With the electric safety device, the cold wind cooling stereotypes, both manual and automatic control mode, can be used for test or continuous operation is very convenient. Usage: is suitable in blister packaging industry, electronic products, stationery, food, lamps, decoration, electrical appliances, daily, medical, pharmaceutical, textile, arts and crafts, and other industries of various types of packaging.
Jaw plate is the main wear part of jaw crusher, it has two types: swing and fixed types. Based on different demands, the material can be Mn13, Mn18, Mn13Cr2, Mn18Cr2, etc. In the past 20 years, according to different requirements from users, normal type or special type, the wear parts can be in our standard or customized. To ensure each piece with high wear resistance and longer use life, Denp adopts quality materials and unique heat treatment method. We know how troublesome it is to replace frequently, its' costy and as well a waste of time, so we aim at providing the best quality wear parts to decrease machine downtime, also decreases customers' manufacture cost, improves production efficiency. Jaw crusher, used as the primary crushing step, is widely used in mining, metallurgy, construction meterial, highway, railway, water conservancy and chemical industries for crushing various materials with compression strength less than 350MPa. Jaw Crusher Parameters: Model Feed Opening Size Max Feed Size Capacity Motor Power Adjustment range of discharge opening Eccentric shaft speed Weight (t) (mm) (mm) (m³/h) (kw) (mm) (r/min) PE250 400 250 400 210 3-13 15 20-60 300 2.8 PE400 600 400 600 340 10-34 30 40-100 275 6.5 PE500 750 500 750 425 20-52 55 50-100 275 10.5 PE600 900 600 900 500 30-75 55 65-160 250 15.5 PE750 1060 750 1060 630 72-130 110 80-160 250 28 PE870 1060 870 1060 670 160-210 110 200-260 250 30.5 PE900 1200 900 1200 750 90-190 132-160 95-180 200 50 PE1000 1200 1000 1200 850 197-214 132-160 230-265 200 51 PE1200 1500 1200 1500 950 188-500 160-250 150-350 180 100.9 PE1400 1800 1400 1800 1100 288-480 250-315 500-1100 180 120 PEX250 750 250 750 210 8-22 22 25-60 330 4.9 PEX250 1000 250 1000 210 10-32 30 25-60 330 6.5 PEX250 1200 250 1200 210 13-42 37 25-60 330 7.7 PEX350 700 350 700 300 16-35 30 30-80 300 6.5 PEX300 1300 300 1300 250 15-55 75 30-80 300 11 Jaw Crusher Parameters: Model Feed Opening Size Max Feed Size Capacity Motor Power Adjustment range of discharge opening Eccentric shaft speed Weight (t) (mm) (mm) (m³/h) (kw) (mm) (r/min) PE250 400 250 400 210 3-13 15 20-60 300 2.8 PE400 600 400 600 340 10-34 30 40-100 275 6.5 PE500 750 500 750 425 20-52 55 50-100 275 10.5 PE600 900 600 900 500 30-75 55 65-160 250 15.5 PE750 1060 750 1060 630 72-130 110 80-160 250 28 PE870 1060 870 1060 670 160-210 110 200-260 250 30.5 PE900 1200 900 1200 750 90-190 132-160 95-180 200 50 PE1000 1200 1000 1200 850 197-214 132-160 230-265 200 51 PE1200 1500 1200 1500 950 188-500 160-250 150-350 180 100.9 PE1400 1800 1400 1800 1100 288-480 250-315 500-1100 180 120
Barite grinding Mill also is named Barite mill, Barite grinding machine,Barite grinding plant, is suitable for grinding Barite into fine powder.
Micro pulverizer machine is for super-fine grinding materials with hardness less than 6 in Moh‘s scale and humidity less than 6 percent such as kaolin, limestone, basalt, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, carbon black, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment, up to 200 kinds. The granularity (or final size) of the finished products can be freely adjusted between 325-3000meshes (0.045-0.0057mm), and the capacity (ton/hour) ranges from 0.4T/H to 12T/H depending on the final size and the grinding materials.
Finished Size: 150-2500mesh Capacity: 0.4-30t/h Raw materials: calcite, chalk, limestone, dolomite, kaolin, gypsum, and talc etc, totally more than 100 kinds of materials.
HGM series Micro Pulverizer of Shanghai Clirik mainly consist of main unit, classifier, powder collector, dust cleaner, blower, muffler, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder. After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turn plate by vibrating feeder and sloping feeding pipe. When the grinding mill is at work, the main bearing and each dial are driven by electromotor through reducer, and all the grinding rollers are rolling in the ring channels driving by dial through plunger. The materials are driven to the edge of the turn plate by the centrifugal force and fall down into the grinding chambers. The high-pressure air blower constantly inhales air, airflow with crushed materials are brought to classifier whose high-speed impeller will screen the airflow: The unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; A small proportion of the fine powders, with airflow, moves to the dust cleaner. The materials from the above two lots are sent by the conveyor to get finished powders packed. In addition, filtered clean air will be emitted from muffler in the end.
Micro Powder Mill has been widely used in making fine powder or micro powder, CLIRIK Micro Powder Mill is applicable to non-flammable and non-explosive materials with hardness less than 6, such as the calcite, chalk, limestone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sattapulgite, rectorate, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore floatstone,etc. As one of the best Micro Powder Mill manufacturers, CLIRIK has developped and manufactured more and more advanced grinding machine. The super-micro grinding mill is kind of popular micro milling machine. The ultrafine mill is invented by absorbing advantages from the same trade home and abroad.
Finished Size: 150-2500mesh Capacity: 0.4-30t/h Raw materials: calcite, chalk, limestone, dolomite, kaolin, gypsum, and talc etc, totally more than 100 kinds of materials.
Capacity:1-20 T/H Output Size:30-425 Mesh Feeding size:15-35mm
HJ-III series Ultrasonic Impact Treatment (UIT) equipment is based on Piezoelectric Ceramic Transducer ( PCT ) technology, first developed by Sunbow Technology for use around the world in 1995. UIT technology is a high efficient method to eliminate redundant tensile stress and bring in useful compressive stress in the surface and weld joints of mental products. UIT tool works by way of impacting the surface of mental products in speed of 20000 times a second under the huge push from UIT equipment itself at its maximum power. Enormous energy produced under this high frequency ,high-efficiency and focusing working way and they will cause big compressive plastic deformation in the surface of the mental products, and bring in useful compressive stress by change its original field of stress. Also under this working way, the temperature in the surface sharply rising and dropping, this will change the metal structure and thus strengthen the impacting parts. Product Features: The smallest and lightest handhold impact treatment in the world. Adopts DSP ((Digital Signal Processor))chip as core control system . DSP system also control constant current adjustment and tracking frequency. The longest working time can reach 16hours without additional cooling protection. Tracking frequency could reach ±2.0kHz under the control of self-regulating function model. LCD display board allows user to preset operating parameters and control output power accurately It can be applied to ultrasonic impact processing of all kinds of metal materials, including high-strength steel ,armour steel and titanium alloy and other mental with strength grade over 1400MPa.
EVA foaming machine & thermal insulation material dryer introduction: microwave is used to make the dried product itself become a heating body, so it can achieve uniform heating in a short time. Microwave for industrial / agricultural applications is a high-tech that uses high-frequency oscillating molecular motion as energy. It is widely used in heating, drying and low-temperature sterilization in the food / agricultural product industry; Powder drying and catalytic reaction in chemical industry; Low temperature vacuum microwave drying and sterilization in the pharmaceutical industry; Fast low-temperature drying and shaping of solid wood in the industry of solid wood furniture and musical instruments. As well as many non-metallic products that cannot penetrate the inside of materials in conventional heating and need heat sources, microwave equipment can be used.
Low temperature and high efficiency: when the ambient pressure is below 7.37 KP, the boiling point of water is 40 . Combined with the characteristic that microwave (electromagnetic wave) can heat the material without medium, the water in the material evaporates rapidly. The drying efficiency is more than five times higher than that of the conventional heat conduction type. Especially for products with large volume and poor heat conduction.
Introduction to new energy material drying machine: microwave is used to make the heated object become a heating body, so it can achieve uniform heating in a short time. Microwave for industrial / agricultural applications is a high-tech that uses high-frequency oscillating molecular motion as energy. It is widely used in heating, drying and low-temperature sterilization in the food / agricultural product industry; Powder drying and catalytic reaction in chemical industry; Low temperature vacuum microwave drying and sterilization in the pharmaceutical industry; Fast low-temperature drying and shaping of solid wood in the industry of solid wood furniture and musical instruments. As well as many non-metallic products that cannot penetrate the inside of materials in conventional heating and need heat sources, microwave equipment can be used.
