Liquid filling & capping machine, labeling machine.
Packaging machine, auger filler, sachets filling machine, powder filling machine, big bag packaging machine, valve pouch filling machine.
Single & double sided filament tape, kraft paper tape , printed filament tape.
Packaging machinery.
Packaging machinery.
packing machine.
Standard double round creasing rule is easily used. This is to save time of manufacturing dies for all specifications. Thickness (mm) 1.42(4pt) 2pt/3pt/4pt (0.71/1.07/1.42) Height (mm) 12.7mm(0.500")~50.0mm(1.968") Hardness (hrc) body : 34~36 edge:34~52 Pitch (tpi) 34 34~45 And other different types.
1. Reduces paper dust; 2.Superior bendability; 3. Excellent formability; 4.Eliminates edge crush; 5. Provides excellent anvil life; 6. Available standard or edge hardened rule; 7.Available in coils and strips. Standard available Thickness (mm) 1.42(4pt) 2pt/3pt/4pt Height (mm) 25.40(1.00") 23.80~26.16 Hardness (hrc) through-hardened(34~36) Body : 34~36 edge:34~52 Pitch (tpi) 8 , 10 , 12 5 , 16 , 20 Bevel center side Notch no notched notched .
Containing latex, easy using, low costing, good compression, well exhausted and self-adhesive backing. A full range of hardness and thickness are available.
Note: the cutting edge is waved with a straight back. Available in a large range of popular pitches including special pitches produced to customers' specific requirements.
a therapeutic tool and has become increasingly popular within the sporting arena. K Tape has been used for a long time for the prevention and treatment of sporting injuries. Kensio Tape is not only used for sporting injuries but for a variety of other conditions. There are many proposed benefits to KT, including: proprioceptive facilitation; reduced muscle fatigue; muscle facilitation; reduced delayed-onset muscle soreness; pain inhibition; enhanced healing, such as reducing oedema, and improvement of lymphatic drainage and blood flow. In the same time, Kinesiology Tape is increasingly being used by women in beauty. Kinesiology Taping is manufactured pre-stretched by 15-25% as it is applied to the backing paper. It is characterised by the ability to stretch to 120-140% of its original length and, following application, recoil back towards its unstretched length. Kinesiology Tape purportedly mimics the physical qualities of the skin as it is believed to be the same weight and thickness of the epidermis along with its inherent elastic properties. It is comprised of polymer elastic wrapped in 100% cotton fibres, which allows for evaporation of moisture. The glue is heat-activated and is applied in a wave-like pattern to mimic the qualities of the fingerprint on the finger tip. K Tape is both waterproof and breathable and it can be worn during exercise, showering and even swimming. It dries quickly and seldom causes skin irritation, however; if skin irritation does occur, advice patient to remove tape immediately and wash the area with warm soapy water to remove any residual adhesive.
Purline Tape (No Liner Tape) XPE foam tape ( no liner) Polyethylene foam tape serves as an excellent tape for bonding to textured surfaces together. Widely used in auto, HV industry, work well as cushion tape, can dismiss noise, and temperature resistence. people have higher requriments to personal computers with technology improving , which dricers computers getting thinner and lighter our company as the leader for advanced technology and experienced R&D ability, � which develop all kinds of No Liner Tape wholesale solution for the customers Buy low price, high quality foam tape, PE foam tape, single sided foam tape, acrylic foam tape. You can choose our products. Our company is the leading factory. Warmly welcome new and old customers to visit and patronize!
Brief instruction Binary filling is the process of filling compressed air or nitrogen into the can, sealing the valve with a pouch, filling the raw material in the inner pouch of the can, completely isolating the raw material from the can body, and using the propellant with compressed air (purification) to replace propane butane liquefied gas, dimethyl ether, etc., thereby solving the trouble caused by the leakage of the raw material corroding the can. When the valve is opened, the compressed air in the tank presses the pouch to push the raw materials out of the tank. After the raw materials are completely squeezed out, the compressed air in the tank remains in the can, so the filling can be repeated. This can be changed by changing the valve actuator. This equipment has been widely used in medicine, sanitation, fire fighting, daily chemical industries, such as: cosmetic sprays, household fire extinguishing agents, computer cleaning agents, shaving foam, etc. The machine has fast speed, accurate filling quantity, good air tightness of sealing, and the inflation pressure can be adjusted to the required pressure at will. This machine assembles a sealing cylinder, a forced filling head and a filling cylinder, and the control part is controlled by a PLC controller. The sealing cylinder and the filling cylinder are controlled by several double air control directional valves. We design the whole machine on a workbench, which is safe and reliable, easy to maintain and operate. Feature 1. The material contacted with liquid made of SS316L 2. The device operation interface can be programmed. 3. Equipment automatic initial pressure value display system 4. The operation action and speed can be set freely through the program 5. Control the induction system, set the can to reach the designated position before starting, safe and reliable, and also ensure the safety of the operator. 6. When the pressure value is insufficient, the device automatically stops, and the pressure automatically starts again after the pressure reaches the specified value. Achieve quality control safety in detail. 7. The safe setting of the initial pressure value, the initial pressure value of the equipment does not reach the specified pressure, and is not sealed and inflated. Reduce defective products, reduce waste of packaging materials, and improve quality control rate.
1.Apply to fill liquid, toner, cream, lotion, shampoo, detergent and other materials 2.Adopts servo system to control the filling volume and accuracy 3.Adopts servo system to control the filling speed and filling nozzle inserted 4.Double filling lines work independently to increase production speed. 5.Use PU belt conveyor for easier cleaning. 6.Adopts photoelectric to control the absence of bottles. 7.Easy to disassemble the material contact parts for clean 8.Main Frame and cover material: SUS304, Product contact surface material: SUS316L
1.Apply to fill liquid, toner, cream, lotion, shampoo, detergent and other materials 2.Adopts servo system to control the filling volume and accuracy 3.Adopts servo system to control the filling speed and filling nozzle inserted 4.Double filling lines work independently to increase production speed. 5.Use PU belt conveyor for easier cleaning. 6.Adopts photoelectric to control the absence of bottles. 7.Easy to disassemble the material contact parts for clean 8.Main Frame and cover material: SUS304, Product contact surface material: SUS316L
1.Apply to fill liquid, toner, cream, lotion, shampoo, detergent and other materials 2.Adopts servo system to control the filling volume and accuracy 3.Adopts servo system to control the filling speed and filling nozzle inserted 4.Double filling lines work independently to increase production speed. 5.Use PU belt conveyor for easier cleaning. 6.Adopts photoelectric to control the absence of bottles. 7.Easy to disassemble the material contact parts for clean 8.Main Frame and cover material: SUS304, Product contact surface material: SUS316L
1.Apply to fill liquid, toner, cream, lotion, shampoo, detergent and other materials 2.Adopts servo system to control the filling volume and accuracy 3.Adopts servo system to control the filling speed and filling nozzle inserted 4.Double filling lines work independently to increase production speed. 5.Use PU belt conveyor for easier cleaning. 6.Adopts photoelectric to control the absence of bottles. 7.Easy to disassemble the material contact parts for clean 8.Main Frame and cover material: SUS304, Product contact surface material: SUS316L
1.Apply to fill liquid, toner, cream, lotion, shampoo, detergent and other materials 2.Adopts servo system to control the filling volume and accuracy 3.Adopts servo system to control the filling speed 4.Use PU belt conveyor for easier cleaning. 5.Adopts photoelectric to control the absence of bottles. 6.Easy to disassemble the material contact parts for clean 7. Main Frame and cover material: SUS304, Product contact surface material: SUS316L
1.Apply to fill liquid, toner, cream, lotion, shampoo, detergent and other materials 2.Adopts servo system to control the filling volume and accuracy 3.Adopts servo system to control the filling speed 4.Use PU belt conveyor for easier cleaning. 5.Adopts photoelectric to control the absence of bottles. 6.Easy to disassemble the material contact parts for clean 7. Main Frame and cover material: SUS304, Product contact surface material: SUS316L
Introduction INNOPKG newly designed fully automatic lotion and cream filling production line; such production line is controlled by PLC system. The whole line includes: bottle feeding, filling, cap feeding, stoppering and capping. It is widely used for firming toner, cream, lotion, shampoo, detergent materials
