Ball mill custom Industrial Beneficiation Equipment Industrial ball mill manufacturer Beneficiation Equipment
Ball mill is the key equipment for secondary grinding after crushing. And it is suitable for grinding all kinds of ores and other materials, no matter wet grinding or dry grinding. In our company, this series of high-efficiency ball mill adopts rolling bearing support instead of sliding bearing support with bearing bush. Therefore, it can save energy by 10-20%. According to different discharging ways, it can be divided into two kinds, grate type and overflow type.
Working Principle
The Ball mill can be divided into lattice type and overflow type according to different beneficiation methods, and this machine is two lattice-type ball mill.
� � � � � � � � � � � � � � � The materials from the feeding fittings enter the first bin of the milling machine via the feeding hollow axis evenly when it works. There is a ladder-like or ripple-like scaleboard in the first bin, and different specification steel balls are installed in the bin. When the cylinder rotates, which generating centrifugal force to carries steel balls to a certain height and then balls fall to strike and grind the material. After primary grinding in the first bin, the material then enters into the second bin via a single layer partition board. There is a scaleboard and steel balls in the second bin, so the materials are further ground. In the end, the powder is discharged by output material board.
Industrial Beneficiation Equipment Applications
Besides, it is mainly applied in many industries, such as ferrous&non-ferrous metal mine, building materials, chemical, electric power, coal, traffic, light industry, etc.
Features
1.Reliable performance .more than 21 years of history.
2.Easy operation, due to structure is simple.
3.Convenient in maintenance.
Ring Micro-grinding custom Industrial Beneficiation Equipment industrial powder making equipment manufacturer
HGM Series Stone Powder processing equipment is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica , magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rockphosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.
Ã?Â
Ã?Â
Main Components of Stone Powder processing equipment :
HGM series Stone Powder processing equipment mainly consist of main unit, classifier, dust cleaner, powder collector, blower, muffler, hammer crusher (can be replaced by jaw crusher), bucket elevator, sound-proof room, storage hopper, vibrating feeder and so On.
Applications:
There are five types of Shanghai Dingbo Stone Powder processing equipment, they are HGM80, HGM90, HGM100, HGM100A and HGM125. The finished production fineness can be reached 300meshes~3000meshes, 5-47 micron. The capacity (ton/hour) ranges from 0.4 T/H to 12T/H.
Features of Stone Powder processing equipment:
High Efficiency
Under the same finished final size and the same motor power, the capacity of Stone Powder processing equipment is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.
Long lifecycle of spare parts
The ring and roller are forged by special material with high utilization. Under the same grinding material and finish special size, the lifecycle of spare parts is about one year, which is 2-3 times longer than impact mill or turbo mill. Lifetime can reach 2-5 years for grinding calcite carbonate.
High safety and reliability
Asn rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
High fineness, flexible adjustment
The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97m.
Environment-friendly
The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.
Advanced intelligent speed control device
Convenient adjusting, more uniform particle size.
Industrial coarse grinding machine custom Stone Powder processing equipment Rough mill manufacturer
Coarse Powder Hammer Mill:
engaging in crushing various rocks and stones with comprehensive strength not higher than 320 MPa into fine and micro fine powders, is widely used in metallurgy, mining, chemical, cement, coal, sand-making, coal gangue, construction, refractory materials and ceramic industries.
Ã?Â
Working principle of Coarse Powder Hammer Mill :
Coarse Powder Mill mainly consists of frame, rotor, support iron and grate bars. The frame is divides into two parts: upper part and low part, which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of turnplates, pin shafts, and hammers which are grouped regularly in the main shaft. The main unit drives the main shaft through the motor and triangle belts, which, in turn, rotates the rollers. Large materials entering the crusher through the feed inlet are firstly crushed by the high-speed hammers, and the thrown fiercely to the support iron for further crushing. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement. To avoid the plugging of the crusher, the proportion of water for the crushing material is no more than 20%.
Industrial roughing machine Applicationsï¼?
Coarse Powder Hammer Mill engaging in crushing various rocks and stones with comprehensive strength not higher than 320 MPa into fine and micro fine powders, is widely used in metallurgy, mining, chemical, cement, coal, sand-making, coal gangue, construction, refractory materials and ceramic industries.
Industrial Coarse Grinding Machine Featuresï¼?
1.High manufacturing capacity and low power consumption;
Ã?Â
2.Uniform particle size with high crushing ratio;
Ã?Â
3.Simple structure;
Ã?Â
4.Easy operation and low investment.
[Equipment configuration]: jaw crusher, vibrating screen, vibrating feeder, cone crusher, coarse mill
If you want to know the latest news about the custom Jaw crusher and industrial hydraulic cone crusher manufacturers, Please click here for more product information.
Raymond Mill Raymond Mill for iron ore custom Industrial Raymond Mill Grinding Equipment
Raymond Mill for mining Introduction:
� � � � � � � � � � � � � � � � � Dingbo Raymond Mill is suitable for processing various non-flammable and explosive mineral materials with Mohs hardness less than 9.3 and humidity less than 6%. It is widely used in metallurgy, construction, chemical industry, mining, highway construction, etc. The particle size of the final powder size can be adjusted between 50 and 325 mesh (315-45 microns). Examples of processed materials include quartz, feldspar, barite, calcite carbonate, limestone, talc, ceramics, iron ore, corundum, bauxite, phosphate rock, coal, etc. There are about 400 materials in total.
How Raymond Mill works:
� � � � � � � � � � � � � � � � � � The jaw crusher crushes the large materials to the required particle size, and then is transported by the bucket elevator to the storage hopper, and is evenly and continuously sent to the host for grinding by the vibrating feeder. The pulverized dust flows from the blower to the classifier. After being classified, the particles that meet the fineness enter the cyclone separator through the pipeline and are collected and separated there. They are discharged at the discharge valve and become the finished product; the air flow is sucked into the blower by the return pipe on the top of the cyclone collector. The entire airflow system is sealed and circulates under positive and negative air pressure.
Industrial Raymond Mill's application:
� � � � � � � � � � � � � � � � � � � Dingbo Raymond Mill is suitable for processing various non-flammable and explosive mineral materials with Mohs hardness less than 9.3 and humidity less than 6%. It is widely used in metallurgy, construction, chemical industry, mining, highway construction, etc. The particle size of the final powder size can be adjusted between 50 and 325 mesh (315-45 microns). Examples of processed materials include quartz, feldspar, barite, calcite carbonate, limestone, talc, ceramics, iron ore, corundum, bauxite, phosphate rock, coal, etc. There are about 400 materials in total.
Application areas:
feature:
Raymond Mill Features:
� � � � � � � � � � � � � � � � � � � � � Its working principle is similar to the high-pressure suspension type grinder, but its grinding device is fixed with a pressure spring of 1000-1500kg. When the machine is working, under the action of high-pressure spring and centrifugal force, the grinding roller is close to the grinding ring. Under the same conditions, the grinding roller pressure is 1.2 times that of the high-pressure suspension mill, and the capacity is increased. 20% to 30%; when using rollers and rings, stable capacity and fineness can be ensured.
If you want to know the latest news about the custom Jaw crusher and industrial hydraulic cone crusher manufacturers, Please click here for more product information.
Limestone grinder is designed by our own engineers and technical workers, basing on industrial mill research of many years and adopting world-leading-powder processing technology. Our machine adopts many advantages from numbers of mill all over the world, such as trapezium’s working surface, flexible connection, roll linked pressure boost, etc.
Limestone grinder has overcome the traditional mill’s defect completely in application, capacity, fineness, energy consumption, service life, etc. And it is the ideal substitute of the traditional mill, such as raymond mill, high pressure suspension mill, ball mill, etc.
3-22t/h capacity limestone grinder best feature:
1. The mining processing grinder is featured by vertical structure, small floor area, and strong system. It is an independent production system from the primary process of raw materials to powder making and packaging.
2. The screening rate is up to 99% compared to other mills.
3. The transmission of the machine adopts confined gear box and pulley which guarantees stable transmission and reliable operation.
4. The key parts are all made of high-quality casting and section bars with exquisite craftwork which guarantees the duration of the whole equipment.
5. The electrical system uses centralized control with advanced and reasonable selection and high automatization.
3-22t/h capacity limestone grinder parameters:
Name Mtm100 Mtm130 Mtm160
Ring roll number(pcs) 4 5 6
Major diameter of roller(mm) F310x170 F410x210 F440x270
Inner diameter of roller(mm) F950x170 F1280x210 F1600x270
Revolving speed(rmin) 130 103 82
Max feed size(mm)
The crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening.During operation, the motor drives the eccentric shaft shell to turn around through ahorizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.PY series spring cone crusher is widely used for secondary and fine crushing in the fields of mining,building materials, metallurgies and so on. The PY series high-efficient cone crusher can crush materials with middle and high hardness, such as, metal ore, basalt, granite, limestone, cobblestone, sandstone and so on.
2.Features of Spring Cone Crusher:
1.Spring cone crusher has the advantages of reliable construction, high productivity, easy adjustment and less cost in operation.
2.The spring cone crusher release system of cuusher actsan overload protection system that allows tramp to pass through the crushing chamber without any damage
3.The cone crusher use two kinds of sealed formation: dry oil and water which can make plaster stone and engine oil seprated and assure reliable performance
4.The tcone crushing chamber depends on the size of deed and fineness of the crushed product.
gyratory cone crusher price in india Technical Parameter:
Model Specification(mm) Feed opening(mm) Max feeding size(mm) Capacity(t/h) Model of motor Power(kw) Weight(t) Overall dimension(mm)
Pf-1007 F1000*700 400*730 250 15-60 Y250m-6 37 9.5 1800*1600*1800
Pf-1010 F1000*1050 400*1080 300 50-90 Y315s-6 75 14 2340*2007*2500
Pf-1210 F1250*1050 400*1080 300 70-130 Y315l1-6 110 17 2582*2053*2809
Pf-1214 F1250*1400 400*1430 300 90-180 Y315l2-6 132 22 2582*2403*2809
Pf-1315 F1320*1500 860*1520 350 120-250 Y2-355m2-6 200 26 2930*2761*3053
When stone entering the stone impact crusher, materials are continuously thrown to the impact device above the rotor by the high-speed rotating blow bar. Then they are rebounded from the impact plate to the working area of the blow bar, and are impacted again. The materials from large to small are to be crushed by the first and second impact rack repeatedly. The process won’t stop until the materials are crushed to the required size and then discharged from the outlet. Adjusting the distance between the impact rack and the rotor frame can change the shape and size of the final product.
Hgm series stone powder processing equipment is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with moh's hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rockphosphate, kalium ore, pumice, etc., totally more than 100 kinds of materials.
Technical data of stone powder processing equipment:
ADC-8C multielement analyzer
Applications:
It is used to analyze various metal elements in ore or alloy with simple operation and low cost. It is widely applied for zinc ore, lead ore, manganese ore, copper ore, iron ore, chrome ore and alloy analysis etc.
Main operation procedure:
6. Crush ores or alloy
7. Weigh by electronic balance
8. Dissolve and dilute ores or alloy powder
9. Put powder into equipment and get the result
10. Print measuring result
Main features:
Build-in 60 scaling grades on equipment channel, which can be automatically exchanged independently and exactly instead of manual adjustment.
Automatic calibration to different light source, liquor, colorimetric wares and guarantee the measuring accuracy.
Each channel sets several regression equation curves and flex control system of double communication port, it takes 6 channels as benchmark, can not only cut to 3 channels, but also can expand to 9, 12, 15, 18 channels, which is easy to plus or minus elements.
Be online with C and S, then you can control result display, print, storage, inquiry timely by one PC.
The precision is coincided with GB (native standard), can save large amount manpower, materials and energy for customers.
Main parameters:
Power voltage: 220V¨ª+10% 50HZ, electricity consumption: ¨ª_50W
Colorimetric time: 5 seconds
Measuring range: 0-1,999 absorbency value, 0-99.99% concentration value.
Measuring elements: Si, Mn, P, Cu, Ni, Cr, Mo, rare-earth, Mg, Ti, Zn, Al, Pb, and Fe etc.
Precision: confirm to GB/T223.3-5-88 standard.
Main features:
Complete functions with LED display, print the result directly. It is easy to operate and suitable for multi-elements analysis in materials like various metals, alloy and ores.
Dissolve the sample outside the equipment without pipe electromagnetic valve corruption and aging, then the operation is more convenient, more stable function and higher reliability.
Short colorimetric time and fast operation, it takes 8~15min to analyze one element.
Traditional and reliable ore (alloy) analysis method.
Its non-standard configuration: crusher, electronic balance and chemical reagent etc.
1. Simple introduction:
Azc208t small magnetic detector is integrated, all-solid-state and intelligent. With latest american technology, it has high resolution and accuracy, and can calibrate the surrounding interfered magnetic field. It is more advantageous in transportation and usage comparing with silicon oil liquid probe. The display is a powerful pda, which is touch screen with a stylus, you can write directly on it and then mark the measurement.
2. Working method:
The working mode is to transmit the measured magnetic filed strength to pda through rs232 serial port line, then the pda will do data graphics processing and display the results of measurement and processing. Then we will judge and analyze the geological abnormality according to magnetic data variation supplied by azc208t magnetic detector.
3. Application:
1. It is used for magnetic exploration of various magnetic ores (magnetite), combined with other prospecting method, it can research oref+s buried depth, vein direction, continuity, and shape, size, ore deposit scale as well.
2. It is also used for magnetic prospecting and geological mapping of metal and non-metal ore deposits.
3. It is applied in faults location, archeology, hydrology, engineering exploration (pipe detect), seismic omen survey, volcano observation and magnetic prospecting &geological mapping of other environment and disaster geological work.
It is a design that refers advanced technology home and abroad, solves great subjects on shielding and selective signal processing to amplify in complex natural electric field, and also does multiple anti-jamming as well.
Natural electric field prospector is similar to traditional resistivity prospector generally, the biggest difference is applying natural electric as field source and removing heavy power supply, the total set is no more than 5kg. Its main features are simple operation, easy to carry, high accuracy, fast speed, flexible array etc. More than 20 years' practice proves that it is a state-of-the-art portable earth resistivity meter and gains customers' common praise.
2. Principle:
It uses the relative parameters like resistivity variation produced by natural electrical field and different geologic structure to judge and analyze the geological abnormality we are searching. The principle is nearly the same with traditional resistivity prospecting, but it enhances the speed more than 10 times.
3. Main application:
1. Widely used in metal ore prospecting, non-metal ore's detailed and general survey to decrease the venture of mineral investment and improve exploration success rate and scientificalness.
2. Applied in underground water detect to meet the demand of drinking water, industrial usage and agricultural irrigation.
3. Also used in engineering geological prospecting, disaster geological detect, coal goaf, archaeological mining, city exploration, non-metal pipe survey as well.
It is a design that refers advanced technology home and abroad, solves great subjects on shielding and selective signal processing to amplify in complex natural electric field, and also does multiple anti-jamming as well.
Natural electric field prospector is similar to traditional resistivity prospector generally, the biggest difference is applying natural electric as field source and removing heavy power supply, the total set is no more than 5kg. Its main features are simple operation, easy to carry, high accuracy, fast speed, flexible array etc. More than 20 years' practice proves that it is a state-of-the-art portable earth resistivity meter and gains customers' common praise.
2. Principle:
It uses the relative parameters like resistivity variation produced by natural electrical field and different geologic structure to judge and analyze the geological abnormality we are searching. The principle is nearly the same with traditional resistivity prospecting, but it enhances the speed more than 10 times.
Vibrating Screen
SANYYO screens for scalping, separating and sizing aggregates, minerals and coal come in several different types and a wide range of sizes. We offer screens for both wet and dry applications, and the screening media for optimum end product quality. We also offer both individual units and complete systems, as well as expert advice on choosing the right screen for the job. Our equipment is easily adaptable for stationary and mobile crushing plants. Its main function is to separate different sizes of products. SANYYO vibrating screen has the ability of seperating six different sizes of products in the same time.
Features and values
1) Simple and dependable Eccentric type system.
2) High screening capacity.
3) High durability.
4) No transmission of screen panels.
5) Ready changing of screen plates.
6) Rigid and vibrating resistance screen body.
Vibrating screens operating principle:
In screen grading, the material is separated mechanically on screen plates. Rolling bearings in vibrating screens are stressed by high, mostly shock-type loads. Moreover, the bearings, while rotating about their own axis, perform a circular, elliptical or linear vibrating motion. This results in high radial accelerations which additionally stress the bearings, and especially the cages, considerably. The operating speeds are usually very high. As a result, the bearing temperatures are up to 20 to 30 degrees Kelvin higher than in normal applications. In addition, considerable misalignments between the bearing locations and considerable shaft deflections have to be accommodated.
Nude packing, wooden case.
800 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
