Find Verified Builders Hardware Construction Material Equipment Suppliers, Manufacturers and Wholesalers

Ball mill is an important grinding mill for grinding after materials are crushed and also an efficient tool for grinding various materials into fine powder.There are two ways of grinding: the dry process and the wet process. Ball mill can be divided into tabular type and flowing type according to different forms of discharging material.

The machine is mainly applied to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. it can produce powder from various non-flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, Xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal Gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundun, heat insulating material, etc.

Hammer Crusher is widely used in mining, cement, coal, metallurgic, construction material, road building, and Petroleum & Chemical industries. It is used for grinding the medium-hard materials. The material will be grinded by the striking between high-speed hammer and material. It possesses qualities of simple structure, large reduction ratio, and high-efficiency. Both Dry and Wet Process are available.

Hammer Crusher Operating principle:

The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.

Vibration screen is vibrated by the circling motion. The screening line of material is long and has a lot of sieve specification. The screen of every shelf specification is clear, and it adopts the style of the barrel to surge.
It had the characteristics of reliable structure, strong vibrating strength, low noise in vibration, easy maintenance, safety operation and it is widely used in mining, building materials, traffic energy, chemical industry, etc.

MTM Medium Speed Trapezium Mill is a leading-world-level industrial mill. It is designed by our own engineers and technical workers, basing on industrial mill research of many years and adopting world-leading-powder processing technology. Our machine adopts many advantages from numbers of mill all over the world, such as trapezium working surface, flexible connection, roll linked pressure boost, etc. It has overcome the traditional mill defect completely in application, capacity, fineness, energy consumption, service life, etc. And it is the ideal substitute of the traditional mill, such as Raymond mill, high pressure suspension mill, ball mill, etc. Nowadays, our products have been widely used in metallurgy industry, electric power industrial, chemical, building, steel industry, coal industry, etc. And it has brought large economic benefits to our customers and the society.

It is widely used in building, chemical, chemical fertilizer, metallurgy, mining, nonmetal, abrasive, bearing materials, ceramic, steel, thermal power, brick, tile, and coal industries. It can grind all the materials which are 9 or less on

the Mohs scale with moisture below 6%, and non-explosive and nonflammable mining materials. The final size can be adjusted from 30 to 400 meshes easily. There are thousands of materials our machine can grind. The typical materials are cement (raw meal and cement clinker), quartz, feldspar, calcite, gypsum, limestone, dolomite, graphite, fluorite, aedelforsite, phosphate ore, fused calcium magnesium phosphate, carbamide, electrolytic manganese metal, ferromanganese, coal, gangue, slag, zirconium, steatite, granite, orthoclase, marble, barytes, ceramics, and glass.

This mill has many technical advantages:
Firstly, the ladder-shaped rollers and ring improve crushing efficiency greatly.
The rollers and ring are designed in inverted trapezium, which reduce the material's slip velocity between rollers and ring, extend grinding time, and enhance crushing effect.

Secondly, the press spring with balancing pressurized function and the forming resilient connection with steady and vibration reducing function: Our machine adopts level principle. The symmetrical roller assembly is connected by horizontally placed spring rod. When the large material impact one roller assembly, the radial force may pass to another roller assembly which is on the plane of symmetry through spring rod to keep balance. Under this condition, the whole device's bearing is improved about 40% than others. The forming resilient connection can reduce the vibration and noise, and avoid resonance.

Thirdly, the powder classifier adopts high density impeller which can increase powder precision and capacity. It is a proved fact that under fixed spindle speed, enhance the density of impeller is to enhance the fineness of final products. In other words, when the fineness of final product is fixed, the spindle speed of high density impeller is lower than the low density one, thus under the same power, the density one reduces resistance to air flow, the capacity is improved more than 50%.

Fourthly, there is high-efficiency and energy-saving blower. The efficiency of prismatic blade equipped on the traditional machine is only 62%, but the efficiency of the energy saving blower whose impeller and blade are both stamping is 85%.

Lastly, there is convenient impeller adjusting device. The clearance between housing and end of powder classifier's blade also effects fineness. Our mill is convenient to adjust the clearance.

The XZM Ultrafine mill is new processing equipment of high efficiency and low consumption, which is designed by our own engineers and technicians of multiple innovation, test and experience of more than twenty-year in mill manufacture. This mill has absorbed many advantages of home and aboard mill-manufacturing technique. The mining machine is the representation of leading level of high quality grinding machine.The grinding machine has been proved that our product has perfect performance and high quality by many customers. The mill machine is mainly used to grind various nonmental materials whose Moh¦s hardness in under 9 into powder of 0.045mm to 0.005mm. Typical materials are cement (raw meal and cement clinker), quartz, feldspar, calcite, gypsum, limestone, dolomite, graphite, fluorite, aedelforsite, phosphate ore, fused calcium-magnesium phosphate, car amide, electrolytic manganese metal, ferromanganese, coal, gangue, slag, zirconium, steatite, granite, orthoclase, marble, barites, ceramics, glass, etc.
Features:
High productivity, low energy consumption
Product 0.045mm to 0.0005mm easy adjudtable, ninety-seven percentage of the finest product can be less than 0.005mm.
Stable, reliable
Clear, environmental protection