Used construction machinery like crane, grader, bulldozer, excavator, roller.
Used construction machineries, such as wheel loaders, bulldozers, road rollers, compactors, motor graders, excavators, truck cranes and forklifts, under world famous brands including Caterpillar, Komatsu, Hitachi, Tadano, Kato, Dynapac, Bomag, Toyota.
Second hand crane, and other construction machinery under good conditions.
Alumina ceramic, armor ceramic, alumina ceramic tile, bulletproof ceramic, ceramic cylinder, armor plate, ceramic plate, ballistic ceramic, body armor plate.
Our products range. Vigortech is the leade rof angle measurement field. We always supply the advancedand good performance tiltsensors to theconstructionmachinery. 1)static inclinometer--20 types, it has good ability to resist vibration filter and suitable for measuring in static. 2)quasi-dynamic inclinometer--8 types, its suitable for measuring under affection on continuous acceleration. 3)dynamic inclinometer--5 types, its suitable for measuring in dynamic slope. 4)more than 4 types inclinometer can stand 400g impact. 5)more than 3 types inclinometer are suitable for applying to the insideof drill pipe. Basing on our many years experience, we think the importantpremiseforachievinghighsafety is that can accurately measure the angle by tilt sensor under emergency.
Sinoplank is an engineered wood product designed specifically for use as a scaffold plank. Product: laminated veneer lumber scaffold planks Application: for use as scaffold platforms or decks Material: structural laminated veneer lumber (lvl) Standards: osha (standards & regulations 29-cfr) 1926 subpart l, appendix a, bs 2482 specification for timber scaffold boards, as1577-1993 scaffold planks appendix a and appendix b Core: pine core and face Adhesive: phenolic adhesive for exterior use Section size: 38mm/42mm thick and 225mm/230mm wide Moisture content: maximum 16% moisture Lengths: 1.0 m to 6.0 m length range available End sealant: acrylic end sealant for moisture protection Approximate mass: 4.95 kg per lineal meter Edge branding: embossededge branding at customer request Finish: un-sanded faces, rounded edges, painted ends Proof testing: planks proof loaded and rigidity measured for verification of strength claims. Standard verification testing is regularly completed both in the mill and by the independent third party.
Sinoplank is an engineered wood product designed specifically for use as a scaffold plank. Product: laminated veneer lumber scaffold planks Application: for use as scaffold platforms or decks Material: structural laminated veneer lumber (lvl) Standards: osha (standards & regulations 29-cfr) 1926 subpart l, appendix a, bs 2482 specification for timber scaffold boards, as1577-1993 scaffold planks appendix a and appendix b Core: pine core and face Adhesive: phenolic adhesive for exterior use Section size: 38mm/42mm thick and 225mm/230mm wide Moisture content: maximum 16% moisture Lengths: 1.0 m to 6.0 m length range available End sealant: acrylic end sealant for moisture protection Approximate mass: 4.95 kg per lineal meter Edge branding: embossededge branding at customer request Finish: un-sanded faces, rounded edges, painted ends Proof testing: planks proof loaded and rigidity measured for verification of strength claims. Standard verification testing is regularly completed both in the mill and by the independent third party.
Description Aluminum tile, also called corrugated aluminum, is one of the most popular construction material.To a certain extent it could replace stainless steel because its property of lightness and anti-corrosion. Specification: MaterialAlloy aluminum TypeSeries 1 series 9 TemperAll temper Thickness0.1mm 2.0mm Surface treatmentSpray coating/roll coating ColorNaturall/gold¡ Characteristic & advantages Very light and easy to assemble Inexpensive and cost saving Good property of antirust Good effect of heat insulation & sound insulation Moist-proof, fire-proof & dust proof Usage: The roof and wall of workshop or warehouse Temporary house, simply building, dormitory Cleansing house & office Packing Protective film, wood pallet, standard export pacakage Protective film, wood pallet, standard export pacakage
Introduction Performance and characteristic This product can form a rubber elastomer after cured. It has utmost strong water resistance, good ductility and cohesive property, and the advantages of heat resistance, cold-resistance, tensile, aging resistance, long service life, easy construction and can be constructed on the wet base. Use range It can be constructed directly on various wet or dry insulation courses and waterproof courses (i.e. Sbs, polyurethane) of the brick stone, mortar concrete and metal, and also can be used for various new and old buildings and structures (i.E. Roof, basement, external wall, toilet, tunnel, bridge and water tank).
The JK series concrete protects pharmaceutical and waterproof pharmaceutical to contain organic silage by one kind, silicate chemical compound, solidification pharmaceutical and water base chemical compound of the high-efficient active material of surface, non poisonous, does not fire, do not include volatile matter materials. Can is it on suitable material surface, can permeate through material top layer form the three - dimensional network with cement hydroxyl condensation of base to spray directly, make the material form the permanent waterproof layer, reduce the speed of infiltration of the harmful example, prevent the reinforcing bar corrosion, and can improve materials and is able to bear waiting and corrosion-resistant performance. The product category has JK1000, JK1500, JK2050, JK2100, JKC300 trade mark, suitable for different concrete and rigidity waterproof and demand that concrete protect of cement mortar of occasion respectively.
Product composition: cool goal solid phenolic core panels are composed of melamine-impregnated decorative surface papers superimposed over a varying number of kraft phenolic core sheets to achieve a desired thickness. Decorative surface papers may be used on both sides of the panel, or one side may be sanded for bonding to a suitable frame. Recommended uses: cool goal solid phenolic core (spc) panels are produced in various thickness adequate to preclude the use of a substrate. They are useful where flat, freestanding panels are needed for decorative and/or functional purpose: toilet and dressing room partitions, instrumentation panels, workbenches, shelving and tabletops; casework, furniture surfacing applications and interior doors. Panel size: 4'x 8', 4'x10', 4'x12', 5'x6', 5'x10', 5'x12', 6'x6' . Thickness: from 3mm to 30mm.
Introduction Model WD28-207-828 colored steel tile forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, pressing equipment, post-cutting equipment, hydraulic station, controlling system, supporter table Working Flow Decoiling the Sheetí¬í·Sheet Guidingí¬í·Film Coveringí¬í·Roll Formingí¬í·Measure Length í¬í· Cutting the Panelí¬í·Panels to the Supporter. Main Parameter Machine Type YX28-207-828 Frame Dimension 8m*1.5m*1.4m Weight 5-7 ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 5.5kw Hydraulic Cut Power 5.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.4-0.8mm Forming Speed 1-3m/min Step Of Roller 14 steps More details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment. Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box.
Introduction Model WD76-305-914 series decking forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, post-cutting equipment, hydraulic station, controlling system, supporter table. The corrugated profile sheet produced by this machine has high strength with big rib, which adheres well to concrete. Ití»s best to be used as the floor of high buildings, and the cost of such floor is low. Main Parameter Machine Type YX 76-305-914 Frame Dimension 19m*1.5m*1.3m Weight 10-12ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 11kw Hydraulic Cut Power 5.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.75-1.5mm Forming Speed 10-12m/min Step Of Roller 25-30 steps More details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box
Introduction Model WD26-200-800/1000 colored steel tile forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, pressing equipment, post-cutting equipment, hydraulic station, controlling system, supporter table Working Flow Decoiling the Sheetí¬í·Sheet Guidingí¬í·Film Coveringí¬í·Roll Formingí¬í·Measure Length í¬í· Cutting the Panelí¬í·Panels to the Supporter. Main Parameter Machine Type YX 26-200-800/1000 Frame Dimension 8m*1.5m*1.4m Weight 5-7ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 5.5kw Hydraulic Cut Power 5.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.4-0.8mm Forming Speed 1-3m/min Step Of Roller 14 steps More details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box
Component and Function 1. Sheet guiding equipment: Using guiding equipment of leader sliding block style. The width and the left or right position can be adjusted only by adjusting the leader, then the sliding block can realize left or right movement. 2. Mainframe Transmission: Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet. 3. Roll forming system: The main frame of machine is welded separately and the outside wall is connected by screw after being roto-blasted on the surface. The rollers are surface-chrome plated after being machined by the exact machine tool. Main Parameter Machine Type YX15-225-900 Frame Dimension 5m*1.5m*1.4m Weight 3ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 2.2kw Hydraulic Cut Power 1.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.3-0.8mm Forming Speed 10m/min Step Of Roller 9 steps More Details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box
1)Application: For filing, bonding and repairing marble/granite and other stones 2)Colors: Transparent, beige, white, black, red, grey etc. For 3)Capacity: 1L/4L/18L 4)Cured in short time 5)Can be operated in cold weather(-10C) 6)Hard enough for polish
Forklift: Provide the best quality products with the lowest price!
Round trash receptacle Welded with t2mm rhombic expanded metal net and t2.5mm steel frame, which are galvanized based, with surface vinyl plastisol coated. Tgic powder coated metal cover is attached. Major colors are blackf=royal bluef=coffeef=evergreen and red.
Round trash receptacle Welded with t2mm rhombic expanded metal net and t2.5mm steel frame, which are galvanized based, with surface vinyl plastisol coated. Tgic powder coated metal cover is attached. Major colors are blackf=royal bluef=coffeef=evergreen and red.
Refractory Material
