Trade info Min. Order: 1 pieces Trade terms: fob, cif Payment terms: l/c, t/t Production capacity: 10000tons Basic info Export markets:north america, south america, southeast asia, africa, oceania, mid east, western europe Additional info. Production capacity:10000tons Product desciption Application: apply to the rubber construct of bridge engineering, roof water-proof, punching rubber washer and sealing fittings Specification: 1-50mmx500~2000mm(txw) Performance: anti-aging, ozone bearing, good electric performance and anti-tired Specific gravity: 1.4 g/cm3 Tensile strength: 7 mpa Hardness: 65 shore a Elongation: 300% Specific gravity: 1.4 g/cm3 Tensile strength: 7 mpa Hardness: 65 shore a Elongation: 300%
Trade info Export markets:north america, south america, southeast asia, africa, oceania, mid east, western europe Additional info. Production capacity:10000tons Product desciption Application: used in electronic, textile, printing & dyeing fields, volume electricity resistance rate up to 104~108|¸ cm Specification: 2-20mmx500~2000mm(txw) Performance: good elasticity, good electrode and eliminating static interference Specific gravity: 1.45 g/cm3 Tensile strength: 8.0mpa Hardness: 65 shore a Elongation: 400% Luster: black, green, one face black and the other green Pack: kraft paper, film bag and woven bag Specific gravity: 1.45 g/cm3 Tensile strength: 8.0mpa Hardness: 65 shore a Elongation: 400% Luster: black, green, one face black and the other green Pack: kraft paper, film bag and woven bag
White granule Density: 2.98 g / cm3(20¡ãc) Physiological property: Refer to material safety date sheet (msds) Technology: Rubbe accelerator pbo-80 is a special pre-dispersed zinc oxide that apply to rubber industry. Its combined elastomer will prevent moisture absorption in storing.Because of pre-dispersed more evenly, the rubber contains pbo-80 makes product more smooth compare to extrusion rubber made by powder lead oxide.Generally, the tensile and stretch of the pre-dispersed pbo-80 contained vulcanized rubber will be prompted, and elongation at break improved meanwhile. Process: Normally, powder pbo hardly disperse evenly under processing temperature, which cause vulcanization activity declined as well as rubber' static mechanical properties and dynamic fatigue.However, pre-dispersed pbo-80 , because of selection and control of grain diameter, and making pre-dispersed by using its carrier of epr(ethylene propylene rubber)and dispersed surfactants, can keep the best activity of components and dispersed evenly when doing the feeding process during mixing.What's more, pre-dispersed pbo-80 has advantages in the followed: 1.Its granule shape prevents blocking under storage environment. 2.Easy mixing 3. Good flowing 4.No dusty 5.No wastage in feeding 6.Improve the stabilization and homogeneity of each batch mixed rubber 7.Avoid the thermal expansion in feeding of powder zinc oxide. It is suggested feeding at the end of mixing process. Dosage:3 - 8 phr Application: Used to almost all rubber products to improve the statics and dynamic ability. Packing: 25kg/pe inner carton Storing: Cool and shady place, keeping dry, 12 months sealed packing. 25 kg/bag
1.item: melamien powder 2.purity :99.8% min 3.packing : 25kg,500kg,1000kg woven bag with waterproof lining 4.quantity :20 mt in 20 FCL 5.MOQ:5MT 1packing : 25kg,500kg,1000kg woven bag with waterproof lining 2.quantity :20 mt in 20 FCL
1.item: melamine moulding compound 2.grade : food grade 3.color : white , black, yellow , blue , red ,ect 4.application : dinnerware 5.MOQ:5 MT PACKING :10kg,20kg,25kg kraft bag with waterproof lining
JIER Arch Rubber Fenders have been optimized for increased energy absorption, providing reliable and trouble free service for a wide variety of berths even under the most severe conditions. They are being widely used in port facility due to their high energy absorption and low reaction force and stable performance as well as high durability following simple structure. They are particularly useful for vessels with high allowable hull pressures and for locations where mounting space is limited. A variety of sizes and lengths are offered. JDA150X1000 ~JDA1000x2000
Jier cone rubber fender is the result of continuous product development. This fender design is based on the cell fender which was introduced to world-wide markets more than 25 years ago. This type of fender can be considered as the latest in state-of-the-art moulded fender products. Jco500~jco1800
www.finerfender.com http://www.finerfender.com/Marine-Fender-Products/super-cell-fender/ JIER Super Cell Rubber Fender is a well established fender type. This fender has a hollow cylindrical body with fully rubber-imbedded mounting flanges and is designed to deflect in an axial direction. Originally designed to replace cylindrical fenders, these fenders have more than 30 years track record with only some minor improvements over the years. Cell Rubber fenders are very robust and have been used for decades in many ports around the world. JSC400H ~JSC3000H
Www.Finerfender.Com Http://www.Finerfender.Com/marine-fender-products/cylindrical-fender/ Jier jcy series cylindrical rubber fenders are commonly used fenders recommended for all types of applications to ensure a safe and linear berthing to a variety of vessels. Adequate installation is simply achieved by using chains, bars, ropes or specially designed ladder brackets. Jcy150 ~jcy2000
shaped bore inside. Designed for use on tugs and barges, they offer long term durability for applications where repeated compression cycles are encountered in pushing service. They also offer the excellent physical characteristics needed to handle the high loading which occurs both on initial contact, and throughout the service cycle. Jd150x1000 ~jd500x3000
Colour, material, hardness, and others will be to order Inner in poly bags, outer packed in carton
Very firm and wearable With unique metal fixture and tongue-shaped clasp Install easily 50m/roll, 100m/Ïä
Pad printing silicone rubber is mainly used for printing irregular patterns of plastic toys, electroplating toys and trade makers. Pad printing silicone rubber is a carrier which transfers patterns on the steel plate to the toys products surface. Pad printing silicone rubber features: Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free. Pad printing silicone rubber operation instructions: Pad printing silicone rubber is two-component silicone, part a is liquid silicon rubber, part b is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.G. We take 100g of liquid silicon rubber and 2g to 3g catalyst, mix them and pour it to your mold. A fter 2 to 4 hours, you will get a pad printing silicone rubber. Faq of pad printing silicone rubber: Why we should add silicon oil into pad printing silicone rubber? Customers should change the hardness of the silicone pad according to the different patterns of products. Silicon oil can change the hardness and the viscosity of the liquid silicone rubber. Place of origin: china Brand name: hong ye silicone rubber
JGD - type A double ball rubber joint, JDX type rubber joint diameter (size) JGD - type A double ball rubber joint, JDX type rubber joint diameter (size)
Material: Made of asbestos fibre, rubber and heat-resisting packing material, compressing it to thick paper . Uses: Used for the equipment in water, steam, etc.And used as sealing material in the joints of pipeline Working pressure : 0.8 mpa, max working temperature: 150¡æ Sizes: 4100 x 1500 x (0.5 ¨c 6.0)mm, 2000 x 1500 x (0.5 ¨c 6.0)mm, 1500 x 1360 x (0.5 ¨c 6.0)mm, 3810 x 1270 x (0.5 ¨c 6.0)mm 1270 x 1270 x (0.5 ¨c 6.0)mm, 1500 x 1500 x (0.5 ¨c 6.0)mm The other size is optional or according to the requirements of customers. Packing: in wooden pallet of about 1000 kgs, 2000kgs net each.
1.Technics:vulcanization 2.Structure:tc, tb, htc, htcl 3.Material:epdm, nbr, sbr, cr, nr, sil, vt, hnbr, pu, etc 4.Color:various Packaging detail: carton or can offer various of package according to customer's requirement Delivery detail: within 15 days after receiving the prepayment
Have good performance in wear resistance its weather aging resistance is superior than natural rubber £¬ apply to the material for rubber gasket. 1-50mm*0.6-2m*1-20m Density:1.6g/cm3
Have prominent performance of high temperature resistant, apply to special environment of high and low temperature in electric and chemical industries, avirulent and harmless, no adverse effects on the human body. 1-10mm*0.6-1.5m*1-20m
Have good resistance of combustion £¬weather aging£¬ heat and good self-complementary property. 1-50mm*0.6-2m*1-20m
Have good weather aging resistance £¬ozone resistance £¬polar liquid resistance and waterproof. 1-50mm*0.6-2m*1-20m