Item Index Appearance White or light-yellow powder Melting point, min 166 Heating loss, % max 0.40 Ash, % max 0.50 Residue(150m) , % max 0.05
Applications: It applications include the use in pneumatic tire components, solid tires, belts, hoses, cable, automotive mounts,bushing and general mechanical products that are exposed to continuous and intermittent dynamic operating conditions and require protection from ozonation.
Properties: Gray white powder (granule). The density is 1.26-1.32. soluble in benzene, CS2, methyl alcohol, acetone. chloroform, alcohol, insoluble in gasoline, water, acid and alkali with lower concentration. Application: Provides fast cure rate and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra accelerators in tire compounds or industrial rubber products low poison and high efficiency. It is good back up for NOBS. Be regarded as standard accelerator. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag. Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Properties: White powder (granule). Density is 1.41. Soluble in 1% NaOH solution, CS2, benzene, chloroform, slightly soluble in alcohol, insoluble in gasoline. Application: Used for NR, IR, SR, SBR, NBR, EPDM and their latexes. A fast curing primary or secondary effective ultra-accelerator for natural and synthetic latex form compounds. Can be used advantageously for dipped, spread, and cast goods. Similar in property that of PZ. Less resistance to scorching than PZ and shows a slight tendency to premature vulcanization. An antioxidant in adhesive systems. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag. Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Properties: White powder (granule). No taste, no poison. Density is 1.66. Soluble in lower concentration alkali, CS2, benzene, acetone and CH2Cl2, partly soluble in chloroform, insoluble in alcohol, CCl4 and ethyl acetate. Application: Used for NR, IR, BR, SBR, NBR, HR, EPDM and natural & synthetic latexes. Stronger accelerating power than TMTD. Strong resistance to scorching. In its handling, care should be operated, because of its increase activation and strong tendency to scorch at low temperatures (100?C). Often used as a secondary accelerator. In latex, better results are obtained when used in combination with other types such as thiazole accelerators. Used for rubber coated fabrics, latex products and rubber cement, etc. FDA approved in USA. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag. Storage: The product should be stored in the dry and cooling place with good ventilation,avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Properties: Gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. Soluble in benzene,boluene, chloroform, CS2, CH2Cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water,gasoline, acid / alkali with lower concentration. Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone when activated by DPG, TMTD and TS. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Properties: A high activity antioxidant for matural and synthetic rubber provides powerful antiozonant and antioxidant properties with excellent high temperature, fatigue and flex resistance to rubber compounds. While used primarily for ozone resistance, it is a more active antioxidant than quinoline or diphenylamine based antioxidants. The product (alone or in combination with TMQ) provides compound protection against catalytic degradation by copper and other heavy metals. The product has no negative effects on compound adhesion to textiles or steel cord up to levels of 2 phr. Above this concentration it may bloom and interfere with ply to ply and ply to cord adhesion. It will discolor compounds and cause severe contact and migration staining. Application: Used in pneumatic tire components, solid tires, belts, hoses, cables, automotive mounts, bushings and general mechanical products that are exposed to continuous and intermittent dynamic operating conditions and require protection from ozonation. Package: 25kg N.W./bag, in plastic fabric laminated kraft bags lined with plastic bags. Storage: Store closed containers in a cool, dry, well-ventilated area, store far from strong oxidizing materials. Avoid exposure to direct sunlight. Do not double stack.
NAME: High Temperature Stable Insoluble Sulfur IS-HS Series Standard: Q/IMFJ 001-1997 Use: Sulfur vulcanizer improves high temperature safety in rubber masticating without frosting and burnt rubber and improves binding of rubber-rubber and rubber-steel or chemical fiber without contaminating mold. Widely used in natural and synthetic rubber in manufacturing tire, rubber tube, rubber belt, rubber shoes, rubber roller, cabel, seal, latex products and light color rubber products. Packaging: 25kg in plastic woven bag lined with PVC film. Storage: keep in dry, cool and ventilated place with temperature
Trade name: MBT,M Chemical Name : 2-Mercaptobenzothiazole Molecular Formula: C7H5NS2 Item Specifications Appearance: Light-yellow powder Initial M.P.,?= ,170.0 Loss on Drying%,= , 0.4 Ash%,= , 0.30 (150µm)Residues %,=, 0.05
Trade name: MBTS,DM Chemical Name: Dibenzothiazole disulfide Molecular Formula: C14H8N2S4 Used as an acid accelerator currently and a medium fast primary accelerator. Imparts excellent aging properties when used both alone and in combination with DM, TMTD and many other basic accelerators for higher activity. Its accelerative temperature is low and easily be dispersed with lower pollution. Mainly used in the manufacture of tires, tubes, foot wear, rubber belts and hoses etc.
Rubber chemical and synthetic rubber.
Coupling agents are used in the rubber industry to improve the wear resistance and aging resistance of tires, rubber sheets, rubber hoses, rubber shoes and other products, and can reduce the amount of NR, thereby reducing costs. ELD-YG69 can be used to used in rubber industry to improve modulus and tensile strength of rubber, to reduce the compound viscosity and save process energy consumption. It is especially applicable for polymers with double bond or rubber formulation with hydroxyl fillers. The suitable fillers include silica, silicate, clay, etc. The suitable rubber include natural rubber (NR), Butadiene styrene rubber (SBR), Isoprene rubber (IR), Butadiene rubber (BR), Acryloni-trile butadiene rubber (NBR), Ethylene propylene diene rubber (EPDM), etc.
We company is committed to rubber chemical sales, such as Accelerator MBT, MBTS, CBS, DPG, TBBS, etc. Antioxidant TMQ, IPPD, 6PPD, DTPD, DBD, DBD-40 Antiscorching PVI Phenolic resin RT11**series -- 5***series Carbon black N330,N660,N550, etc.
We company is committed to rubber chemical sales, such as Accelerator MBT, MBTS, CBS, DPG, TBBS, etc. Antioxidant TMQ, IPPD, 6PPD, DTPD, DBD, DBD-40 Antiscorching PVI Phenolic resin RT11**series -- 5***series Carbon black N330,N660,N550, etc. If you sir are interested in some products, pls let me know, we company must serve you the most suitable price and good quality products.
I'm a rubber chemicals supplier and manufacturer from China. We mainly focus on rubber chemicals like *Accelerator MBT, MBTS, CBS, NOBS, DPG, TBBS, etc. *Antioxidant TMQ, IPPD, 6PPD, BLE, DTPD, DBD, DBD-40 *Antiscorching PVI *Phenolic resin RT11**series -- 5***series *Carbon black N330,N660,N550, etc. We have good cooperation factories, and we are winning the praise of clients with our huge inventory, the most complete varieties, the most stable supply of goods, and the most timely supply.
Accelerator MBT is Used as an acid accelerator currently and a medium fast primary accelerator. Imparts excellent aging properties when used both alone and in combination with DM, TMTD and many other basic accelerators for higher activity. Its accelerative temperature is low and easily be dispersed with lower pollution. Mainly used in the manufacture of tires, tubes, foot wear rubber belts and hoses etc.
MBT(M) ,MBTS(DM) , ZMBT(MZ) , CBS(CZ) , TBBS(NS) ,TMTD(TT) ,NOBS(MBS, MSA), TETD , TS (TMTM) ,DPTT(DPTH) . TIBTD(IBTD), ZDEC(ZDC, EZ) , ZDMC(PZ) ,TS (TMTM) ,DPTT(DPTH) .TS (TMTM) ,DPTT(DPTH) . TIBTD(IBTD), ZDEC(ZDC, EZ) , ZDMC(PZ) , ZDBC(BZ) , ZBEC (ZBDC) ,Na-22(ETU) , DETU, DBTU, DPTU (CA) , DPG(D) , DPTU (CA) , DPG(D) , DOTG(TD,TDG), TBZTD , SBDC-40(TP) , PX(ZEPC,ZnEPDC).
The main products are: 1.Rubber accelerator acid-base series MBT(M) ,MBTS(DM) , ZMBT(MZ) , CBS(CZ) , TBBS(NS) ,TMTD(TT) ï¼? NOBS(MBS, MSA), TETD , TS (TMTM) ,DPTT(DPTH) . TIBTD(IBTD), ZDEC(ZDC, EZ) , ZDMC(PZ) ,TS (TMTM) ,DPTT(DPTH) .TS (TMTM) ,DPTT(DPTH) . TIBTD(IBTD), ZDEC(ZDC, EZ) , ZDMC(PZ) , ZDBC(BZ) , ZBEC (ZBDC) ,Na-22(ETU) , DETU, DBTU, DPTU (CA) , DPG(D) , DPTU (CA) , DPG(D) , DOTG(TD,TDG), TBZTD , SBDC-40(TP) , PX(ZEPC,ZnEPDC). 2.Rubber antioxidant RD (TMQ) , MBI(MB), MMBI(MMB), MBZ(ZMBI), MMBI(MMB) ,MBZ(ZMBI), MMBZ(ZMMBI,ZMTI), 2246, 4010Na (IPPD) , 4020(6PPD) . 3100(DTPD) , 3.Anti-coking agent PVI (CTP) , E/C anti-coking agent e, green additives, etc. ,can be processed into powder, granular, oil-like particles, pre-dispersed particles MBT-75, MBTS-80, DPG-75, DPTT-80, etc. .And can also provide customers with rubber additives product solutions. Products are widely used in aerospace rubber products,
Material Properties Butadiene-Acrylonitrile Latex (NBR Latex) is a kind of high-polymer dispersion emulsion polymerized by freeradical emulsion through advanced techniques. As a white thick emulsion in appearance, it is of good oil resistance, and applied for oil resistant products, including oil resistant membrane, oil resistant asbestos packing sheet, glassine sealing plate, oil tank, oil resistant foam sponge, and fibreboard, etc. Typical properties Product NBR Latex/Emulsion Latex NBR Execution Standards: Q/320205GL.FF03-2007 Item Standard Solid Content,%43 Viscosity, mPa 50 PH Value(25ºC)9-12 Application Butadiene-Acrylonitrile Latex (NBR Latex) : 1.suitable for oil resistant dipped articles, oil resistant asbestos products, synthetic leather (latex with plant fiber and animal fiver, insole of shoes), and coatings. 2.This NBR Latex is suitable for making gloves.
Material Properties Styrene butadiene Rubber latex is a kind of high-polymer dispersion emulsion polymerized by butadiene, and styrene, etc. through advanced techniques. As a white thick emulsion in appearance, it has good viscosity. It is one of the popular raw materials in tyre-dipping fabric industry, because of its good intermiscibility with VP latex for fabric dipping. Typical properties Product Styrene butadiene Rubber latex (SBR latex) Execution Standards: Q/320205 GLFF01-2010 Item Standard Solid Content, % 50.0±1 Viscosity, mP25-35 pH Value(25ºC) 10-11 Density,g/cm3(20ºC) 0.98-0.99 Mechanical Stability, %5 Chemical Stability, %0.33 Application It is suitable for the dipping of tyre cord fabric, and industrial fabric etc.. Storage&Package 1.Avoid from rain, snow or strong sunlight. Temperature: 1~40°C. 2.200L Drum, 1000L IBC. 3.Keep in dry, cool, non-aggressive gas warehouse, and avoid strong sunlight, remote from fire and thermal resource at 1~40°C, 6 months shelf life, a little decrease of PH value.
