Rubber accelerator, rubber antioxidant, rubber chemicals.
Rubber chemical, rubber accelerator MBT,MBTS,CBS,TMTD,DPG,MBS,TBBS,DCBS,ZDEC, rubber antioxidant TMQ,IPPD,6PPD,PBN.
Rubber chemicals.
Rubber chemicals.
Rubber chemical.
Rubber accelerator.Clearing agent
Rubber accelerator dpg Chemical name:diphenyl guanidine Molecular formula:c13h13n3 Cas no:102-06-7 Specification: Appearance Gray-white powder Initial m.P. Oc 144.0 Heating loss 0.40 Ash 0.40 Residues on sieve(150m), % 0.10 Properties:grayish-white powder. No taste, no poison. Densiy is 1.08-1.19. Soluble in acetone, ethyl acetate, benzene, alcohol, slightly soluble in ccl4; insoluble in water and gasoline. Application:used as a secondary accelerator with thiazoles and sulphenamides in nr and sbr compounds. Exhibits better storage stability compared to thiuram and dithiocarbamates but is not so active. Dpg can be used in latex as secondary gelling agent (foam stabilizer) in the silico-flouride foam process Packing: 25kg in kraft paper bag with pe bag inside, or 25kg in plastic woven bag with pe bag inside, or as customers request. Storage:keep in a cool, well-ventilated place. The shelf life is 2 years. Notes: the products could be oil coated powder, as per customers request.
Dibenzothiazole disulfide Cas no: 120-78-5 Specification: no. Itemunitspecification 1appearance light-yellow powder 2initial m. P. (min)c162.0 3loss on drying (max)%0.40 4ash (max)%0.50 5residues on 63um sieve (max)%0.50 6oil content (*)%0; 1.0--2.0 Properties: a little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: given flat, moderately fast cures in nr and sr. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synth etic polymers. Better scorch safety than mbt. Storage: keep container tightly closed in a cool, well-ventilated place. The recommended max. Storage life is 2 years when stored under normal conditions. Packaging: 20kg bag.
Chemical Name:Zinc diethyl dithiocarbamate Molecular Formula:C10H20N2S4Zn Molecular Weight: 361.93 CAS NO:14324-55-1 EINECS NO.: 238-270-9 Specification: Item Powder Oiled powder Granule Appearance (visual inspection) white powder(Granule) Initial M.P. oC� 174.0 174.0 174.0 heating loss %� 0.40 0.40 0.40 Zinc content % 17.5-19.0 17.2-18.7 17.2-18.7 Residues on sieve(150μm), % � 0.10 0.10 Residues on sieve(63μm), % � 0.50 0.50 Oil content, % \ 1.0-2.0 Granule diameter, mm \ \ 1.5-2.5 Properties:White powder (granule). Density is 1.41. Soluble in 1% NaOH solution, CS2, benzene, chloroform, slightly soluble in alcohol, insoluble in gasoline. Application:ZDEC is used as primary or secondary accelerator for NR, SBR, IIR or EPDM; also used for natural rubbers or synthetic latex; as anti-oxidant for rubber-based adhesives. Packing:25kg in kraft paper bag with PE bag inside. Storage:The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
The product is extracted and refined from a plant. It mainly acts as a softener in the production of rubber material and reclaimed rubber. It is non-irritative, non-toxic, and environmentally friendly. The produced reclaimed rubber can meet European Standard. Specification: Items Specification Appearance Dark brown viscous semisolid Engler Viscosity S(C100ml;85ï¼? 300-500 Volatile Content, % 6.0 max Moisture (V/W), % 0.5 max Mechanical Impurity, % 0.1 max Ash, % 0.9 max Specific Gravity (d20/4) 0.95-1.05 Odor Non-irritative 18 PAHS sum (mg/kgï¼? 5.00 max Packing: 1)200kg/drum 2)5kg/bag, 40bags/drum Any inquiry, pls contact sofia.chu(at)zzdenglan.com freely. Payment Term: 1)30%TT before production and balance against copy of BL 2)LC at sight
Item Specification Engler ViscositySï¼?C100ml;85ï¼? 250-350 Specific Gravityï¼?d20/4ï¼? 1.01-1.06 Volatile Contentï¼?%â?¤ 6.0 Wash Content, %â?¤ 0.50 Acidity,%â?¤ 0.30 Mechanical Impurity,%â?¤ 0.03 Water,ï¼?â?¤ 0.5 Packing: 200kg/drum 10kg/bag, 20bags/drum Any inquiry, pls contact sofia.chu(at)zzdenglan.com freely.
Compared with the general product, odorless environment-friendly rubber reclaiming agent (reclaim rubber activator) has better permeability and stability in the desulfuration process of reclaimed rubber (regenerated rubber). It can increase the strength tensile, elongation of reclaim rubber and low the Mooney viscosity. This improves the performance of reclaim rubber. Product Specification Appearance Light brown viscous liquid Total Sulfur Content 13% Min Combined Sulfur Content 12% Min Free Sulfur content 1% Max Viscosity (35 centigrade), Pa.s 10-30 Solubility in water Negligible Features 1.Shorten the desulfurizing time 2.Improve the product quality 3.Decrease the production cost 4.Meet European export standard Application Widely used for the whole tire reclaim rubber, butyl reclaim rubber and EPDM reclaim rubber. Packing: 1)1kg/bottle, 20 bottles/carton, 2) 200kg/drum Any inquiry, pls be free to contact sofia.chu(at)zzdenglan.com.
The rubber reclaiming agent has better permeability and stability in the desulfuration process of reclaimed rubber. It can increase the strength tensile, elongation of reclaim rubber and low the Mooney viscosity. This improves the performance of reclaim rubber. Product Specification Appearance Dark brown viscous liquid Total Sulfur Content 11% Min Combined Sulfur Content 10% Min Free Sulfur content 1% Max Viscosity (35 centigrade), Pa.s 8-20 Solubility in water Negligible Features 1.Shorten the desulfurizing time 2.Improve the product quality 3.Decrease the production cost Application Widely used for the whole tire reclaim rubber, butyl reclaim rubber and EPDM reclaim rubber. Any inquiry, pls contact sofia.chu(at)zzdenglan.com freely.
Rubber accelerator cbs Chemical name:n-cyclohexyl-2-benzothiazole sulfenamide Molecular formula:c13h16n2s2 Cas no:95-33-0 Specification: Appearance Gray-white powder Gray -white granular Initial m.P. Oc 98.0 98.0 Heating loss % 0.30 0.30 Ash% 0.30 0.30 Residues on sieve(150î¼m), % 0.10 Properties:gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. M.P.: 98oc above. Soluble in benzene, boluene, chloroform, cs2, ch2cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water, gasoline, acid / alkali with lower concentration Application:cbs has excellent scorching property, high curing rate, high modulus of vulcanized rubbers, wide range of application. It is a sulfenamide accelerator with the highest activity in epdm. 25kg/bag
Rubber accelerator tmtd Specification: Chemical name:tetramethyl thiuram disulfide Cas no: 137-26-8 Specification: no.Itemunitspecification 1appearance-white powder 2initial m.P. (min)c142.0 3loss on drying (max)%0.40 4ash (max)%0.30 5residue on 150m sieve (max)%0.10 Properties:no odor and poison. Irritating to the skin and the respiratory tract. Specific gravity: 1.38--1.44. Soluble in chloroform, acetone, benzene; hardly soluble in carbon tetrachloride, ethyl alcohol & insoluble in water or gasoline. Application:can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and ev cure systems. Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for epdm. May be used as a retarder in the vulcanisation of polychloroprene rubber with etu. Storage:keep container tightly closed in a cool, well-ventilated place. The recommended max. Storage life is 2 years when stored under normal conditions. Packaging: 25kg bag.
Requires zinc oxide and stearic acid as activators in many kinds of rubber batch.Easily disperses in rubber;yields non-staining and non-discoloring products.Mainly used in the manufacture of latex products,foam rubber,latex coating gloves. It is light yellow powder with a little bitter,no poison,The density is 1.70.the decomposable temperature is 300.0 Item MZ-5 MZ-15 Appearanceoiled powder , light-yellow powderoiled powder, light-yellow powder Initial M.P ºC =200.0200.0 Loss on Drying %,=0.300.30 Zinc Content %16.0-22.015.0-18.0 M% =5.015.0 Residues% =0.10.1 Additive%
The product is used as antioxidant for natural rubber and latex;also used for polyethylene.It can be used alone,or together with other anti-aging agent(such as DNP, AP and other nonpolluting anti-agers).It should not be used for food contact rubber products. The product is white powder,no smell but taste bitter,the initial is more than 290.0?,loss on drying is 0.30,ash is less than 0.4%.
It is used for natural and many synthetic rubbers.Mainly used in the manufacture of tires,hose,footwear,tape and genera industrial products. It is gray-white powder,and have three grades,qualified grade ,first grade and top grade. Its packing is 25kg plastic woven bag,paper with plastic film bag. The product could be oiled and pelleted upon customer request.
Appearanceyellow powderyellow powderyellow powder InitialºC=173.0171.0170.0 Loss on drying %=0.300.400.50 Ash%=0.300.300.30 Residues=0.100.100.10 It is yellow powder. Slightly foul odor and bitter taste,nonpoisonous. Specific gravity :1.42-1.52.Soluble in ethyl acetone,acetone,dilute solution of sodium hydroxide and sodium carbonate,ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. It is used in the manufacture of tires, tubes, footwear, rubber belts and hoses. Its packing is paper with plastic film bag,25kg plastic woven bag The product should be stored in the dry and cooling place with good ventilation,avoiding exposure of the packaged productto direct sunlight.
Chemical Name: 2-Mercaptobenzothiazole Molecular Formula: C7H5NS2 Molecular Weight:167.26 Product Standard: GB/T11407-2003 Cas no: 149-30-4 Specification Item Top Grade First Grade Qualified Grade Appearance (Visual Inspection) Yellow Powder Initial M.P.,173.0 171.0 170.0 Loss on Drying%,í_ 0.30 0.40 0.50 Ash%,í_ 0.30 0.30 0.30 Residues(150)%, 0.00 0.10 0.10 Properties: Yellow powder.Slightly foul odor and bitter taste,nonpoisonous. Specific gravity: 1.42-1.52. Soluble in ethyl acetone,acetone,dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. Application: The product is a hemi-ultra accelerator, extensively used in vulcanization of natural and synthetic rubbers. Mainly used in the manufacture of rubber tires, rubber belts, rubber shoes and other industrial rubber products. Storage: The product should be storaged in the dry and cooling place with good ventilation. Notes: The product could be oiled and pelleted upon customers request. Package: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag.