L900/1200 H1500/1800/2100 D450 Plain back panel, volcano back panel,mesh panel,slatwall back panel for choice.
L900/1200/1800/2400 H1500/1800/2100/2400 D450/1070 Plain back panel, volcano back panel, mesh back panel, slatwall back panel for choice.
Dj-7369 magent gold-plating rack Specification : can be designed according to buyer's equipment Material:sus304l, outside coated with pe powder Usage:fif for thin board gold-plating Featuer:1.The main body of the rack is made of sus316l round rod.Its surface is covered with anti-friction pe powder and its operating rod is made of imported pvc materials. 2.It won't be adhered by gold easily and can reduce the amount of carried-out gold water. 3. Each clamping point is made of two different magnetic magnets for two opposite magnets can attract each other.Such design can save operation time And improve production efficiency which finally can bring more profits to buyers. This product is in great demand not only for its light weiht and simple operation but for its reasonable price.In addition, its specification can be designed according to client.Dimensions of the thin board , size of the tank, etc. Wooden case
Dj-7931 thick board copper-plating rack Specification: can be designed according to buyer's equipment Material:sus316l, red copper Usage scope:it can be used for thick board copper-plating.. Featuer:1it is environment-friendly and easy to operate. 2.The main body of the rack is made of sus316l and its surface is coated with pe Powder. It is resistant to strong acid and alkali. And the seperation of the hooks and The main body is convenient for maintaining and exchanging. Wooden case
Dj-7384 flexible board copper-plating rack Specifiction:can be designed accorrding to buyer's equipment Material:sus316l, red copper and pp Usage:it can be used for thick board copper-plating.. Featuer:1it is environment-friendly and easy to operate. 2.The main body of the rack is made of sus316l and its surface is coated with pe Powder. It is resistant to strong acid and alkai.And the seperation of the hooks and The main body is convenient for maintaining and exchanging. Wooden case
Single components to install a very high-standard home furniture.your room,your design.
Our products is mainly composed of wire shelf and posts.It has different size for multi-functional use.
100% stainless steel, no trust, no chrome coating. Modern&classic series for your stylish and exclusive life. Dry heating element, consuming less power, high efficience. Polishing, stain finish, coloured to meet your different demands. Great for drying delicates, clothes and towels. Great to dry off after a shower with a warm towel. Lower 48 states only. Size:900*550*165mm Temp:50 degree Stainless steel rack Voltage:110v-240v Packing size:925*560*70mm, 1 pcs in one pack
1> Suitable for long-shaped and bulky materials, profiles, pipe, timber and moulding 2> high space utilization 3> structure: H steel and traditional roll-formed style 4> height assembly and dismantal easily 7> use high quality of Q235 steel, and competitive price 8> surface treatment: powder coating or galvanized 9> application:Mechanical Manufacturing Industry and markets for building materials, etc 10>Payment terms: By TT or sight LC.
1> suitable for small variety but large quantity stored products, especially for standard goods; 2> high space utilization 3> FIFO/ FILO principle 4> first level pallets can be placed on the floor 5> forklifts operation alongside the aisle 6> assembly freely 7> each aisle consists of several level of pallet support rail. Pallets are placed on pallet support rail one after another; 8> surface treatment: powder coating or galvanized 9> application: warehouse, factory, logistic system, etc. 10> one of the most widely used storage rack 11> OEM order is avaliable
1. All the layers can be fix at any height only if it's times of 75mm, user will adjust different height for various pallet storage; 2. We supply quite big sections of upright to suit special needs; 3. Standard and special dimensions are both available, you just put forward your requirement and we design, we give the solutions; 4. Export powder coated and galvanized surface treatment to prevent against corruption; 5. Pitch is with 75mm. 1) wrapped by polysheet; 2) reinforced by straps
Distance : between each pillar : 4m to 6m. Height: first floor is about 3m, the second and third one is about 2.5 m. Structure: 1)The pillar is usually made up of square tubes or pipes. 2)The main and vice beam are made up of ¡°H¡± type steel. 3) Floor decking is made by cold rolling steel, checkered iron or steel grating. Load capacity: The floor load is in 1000kgsquare meters. Application: The upstairs and downstairs could be used for office, so this kind of floor combines storing and management closely. This is widely used in areas, such as third-party logistics, machinery manufacturing and so on. Operation process: Usually used to build a second floor or third floor assembly type floor in the existing warehouse, make the space change from a layer into two layers, which surely makes the best use of space. Goods are usually conveyed to2nd floor or 3rd floor by forklift hydraulic lifting platform or elevator, and then conveyed to a certain point by light car or hydraulic pallet car.
Features: DIY easy assembly: the simple structure, (Upright, Steel shelf, Gusset, bolt) can build a compelete unit. Height adjustable: the unique pre-punched hole on upright allows you adjust shelf height level easily. Capacity: Light duty shelving, 100kg to 250kg loading capacity per level. Structure: Sturdy, tough, adaptable, rigid when assembled. Versatile design: Easy to relocate and ideal for special purpose designs. Economical, Cheapper cost. . All-purpose slot angle steel upright . Cut-in composite usually with steel panel . Height of each layer can be adjusted freely by pitch of 50mm . Loading capacity: no more than 200kg per level . Simple and quick assembled and dismantled . Loading and unloading by hand . Powder coating finish and various color be available.
1.Size: 450*600*900mm, 2. One set into one color box, 4sets /ctns. 3.Wire gauge: 6.5*4.5*3.5mm 4.Post gauge: 25.4mm thickness:1.2mm 5.Moq: 50sets 6.Load capacity: 150kg(each shelf) 7.Certificate: iso9001:2000 8.Different sizes are available. 1.Size: 450*600*900mm, 2. One set into one color box, 4sets /ctns.
1.Size: 350*600*900mm, 2. 4sets /ctn 3.Wire gauge: 6.5*4.5*3.5mm 4.Post gauge: 25.4mm thickness:1.2mm 5.Moq: 50sets 6.Load capacity: 150kg(each shelf) 7.Certificate: iso9001:2000 8.Different sizes are available. 1.Size: 450*600*400mm, 2. 4sets /ctn, mesh and post are racked in different cartons 3.Wire gauge: 6.5*4.5*3.5mm 4.Post gauge: 25.4mm thickness:1.2mm 5.Moq: 50sets 6.Load capacity: 150kg(each shelf).
1.Size: 450*600*900mm, 3.Wire gauge: 6.5*4.5*3.5mm 4.Post gauge: 25.4mm thickness:1.2mm 5.Moq: 50sets 6.Load capacity: 150kg(each shelf). 4sets /ctn, mesh and post are racked in different cartons
1.Size: 450*600*900mm, 3.Wire gauge: 6.5*4.5*3.5mm 4.Post gauge: 25.4mm thickness:1.2mm 5.Moq: 50sets 6.Load capacity: 150kg(each shelf). 4sets /ctn, mesh and post are racked in different cartons
Cut-in composite step beam on which steel or wooden panels are assembled; the height of each layer is easily to be adjusted by 50mm, the capacity of each level is up to 800kg; the racking can be customized based on clients requirements, compared with the medium-duty shelving, it is more suitable for storing metal components and widely used in the manufacturing industry. 1. Upright: 50*58*1.5/2.0mm, 50mm pitch. 2. Step beam: 50*30*1.5p, 60*40*1.5p, 80*50*1.5p. 3. Steel shelf: 0.7 or 0.8mm, designed by loading capacity request. Plastic film as inner package.
Upright shaft is usually made of H type steel or cold rolling steel or frame, square tube, cold rolling steel or H type steel are used to make arms. Cantilevers are assembled to upright shafts by composite type or bolts & nuts which is also for the fixation between base and uprights. Level height is adjustable. Loading and unloading of goods can be done manually or by forklifts. The height of cantilever racking is usually lower than 2500mm (the height up to 6000mmby using forklifts for loading); length of arm is shorter than 1200mm, and loading capacity is no more than 1200kg per arm. Cantilever racking is mainly used in the Mechanical Manufacturing Industry and markets for building materials. There are three kinds of cantilever racking, light duty, medium duty and heavy duty, each kind of cantilever racking has different loading ability, as well as different material. plastic film as inner package
1. Steel platforms are mainly consisted by uprights, main beams, accessorial beams, steel floors, stairs and protection rails. Assembling in the whole structure, no need to welding in the sites. 2. The uprights are made of square tubes, round tubes and hot rolling H-type steel, the main and accessorial beams are made of hot rolling steel and cold-bending C-type steel, the material of floors are usually cold rolling steel, the structure is lock-up, between floors and main/accessorial beams, there are special designed locks. Compared with traditional checkered steel plates and steel gratings, the lock-up steel plates have many advantages, such as loading stronger, good integrity, good capacity equality, high accuracy, flat surface, lock easily, etc. also it is easy to assemble lighting system. 3. Forklift or lift platform deliver goods to the second or third floor, then trolleys or hydraulic platform carts deliver the goods to the pointed places. Compared to reinforced concrete, steel platforms have such features, building quicker, acceptable cost, easily assemble and disassemble, and can be moved to use, also, the appearance is more beautiful. The distance between two uprights is 4~6 meters, the height of the first floor is around 3 meters, for the second and third floor, the height is around 2.5 meters. The loading capacity of the floors is usually 300~1000kg per square meters. 4. This kind of steel platforms can make storage and management combine closely, upstairs or downstairs can be used as warehouse office. This kind of storage system are usually used to the third logistics, machinery manufacturing and other industries. Plastic film as inner package.
