Features
1, specially designed for painting of such boards as floor window shutter and furniture as well as table boards.Leaves a smooth and piant film of good appearance without any paint piling.
2.Both conveyer belt and silica get tyre driven by imported motor, adopts frequency convertor to adjust the speed, get aprecise control of the smoothness of paint and thickness of paint film.
3.Mobile silica get tyre can be easily installed or replaced can accurately positioned, the height
Can read form the meter, so as to allow you to know the different thickness of boards, thus facilitate your operations.
4.Electro light tyre and scraper allow you to select different working modes to facititate your operations.5.Choose to provide with 5 sets actuator or choose to go together with the plc the each set can use alone, process extremely accurate.Oroces
Model lzdt1300
Coating width 1300mm
Feeding speed 5-30m/min
Peeding power 1.5kw
Coaling roller power1.5kw x2
Smooth roller power 0.75kw x2
Heating power 3kw
Total motor power 9kw
Overall dimensions 1600x2450x1300mm
Weight 1500kg
Priming paint sander is mainly used for uv pu lacquered sanding .It is one of the equipment machine for floor board.Furniture ect.
Technical data:
Working width 600mm
Working thickness 2.5-100mm
Speed of abrasive belt ¦Sµ¦¦˜d·
Speed of conveyor belt 6-30m/min
Size of abrasive belt 1560*600mm
Working air pressure 0.5mpa
Total motor power 5.6kw
Volume of suckta air 1000m /h
Overall dimensions(lxwxh) 1500x1100x1750
Weight 1000kg
Working width 600mm
Working thickness 2.5-100mm
Speed of abrasive belt ¦Sµ¦¦˜d·
Speed of conveyor belt 6-30m/min
Size of abrasive belt 1560*600mm
Working air pressure 0.5mpa
Total motor power 5.6kw
Volume of suckta air 1000m /h
Overall dimensions(lxwxh) 1500x1100x1750
Weight 1000kg
Working width 900mm
Working thickness 2.5-100mm
Speed of obrasive belt 18m/s
Speed of conveyor belt 6-30m/min
Size of abrasive belt 1620x600mm
Working air pressure 0.5mpa
Total motor power 28kw
Volume of sucktd air 1000m /h
1850x1400x1800mm 1850x1400x1800mm
Double-unit wide-belt sander can sand the following boards intensively or according to the required
Thickness;solid-wood board, veneer.Flakeboard, fiberboard.Semi-density flakeboard,
Affixed flakeboard, semi-density flakeboard, affixed flakeboard, affixed air board,
Air board, affixed veneer.Etc
110 Wood Working Machinery Tools Suppliers
Short on time? Let Wood Working Machinery Tools sellers contact you.
It can sand the following boards intensively or according to the required thickness;solid-wood board, veneer.Flakeboard, fiberboard.Semi-density flakeboard, affixed flakeboard, semi-density flakeboard, affixed flakeboard, affixed air board, air board, affixed veneer.Etc
Max working width 610mm
Max working thickness 100mm
Speed of obrasive belt 18, 18, 12m/s
Speed of conveyor belt 6-30m/min
Size of abrasive belt 1560x610mm
Total motor power 11, 7.5, 7.5kw
Volume of sucktd air 1500m /h
Overall dimensions(lxwxh) 2200x1100x175mm
Weight 2100kg
A special spraying equipment with high automatization. Equipped with press wind and exhaust system and double filters system.
Exactly scan the width and length of workpiece;Automatically adjust the spraying range of the gun. Adopt OMRON PLC system and touching screen, chief control electric parts adopt SCHNEIDER brand. Transport belt adopts special material with anti-abrasion and anti-cauterization.Transport speed is adjusted by inverter to reach differeent speed. With special cleaning and reclaiming system.
Automatic profile spraying machine is a special machine for spraying slightness work piece.This machine has high automatization; symmetrical spraying surface;accurate control;high producing efficiency and high cost performance.
It is suitable for uv, pu, pe, nc.Etc.It has uv lacquer reclaiming equipment to reduce waste. It can work independently and also can achieve a perfect effect when it is equipped to make the workpiece dried as soon as spraying finished
With line drier.
Specially designed for painting of such plane boards as floors, windows shutter and furniture as well as table boards, make sure a smooth and paint film of good appearance without any paint pilling.
Both conveyor belt and silica gel wheel are driven by motor , adopt inverter to adjust the speed to get a precise control of the smoothness of paint and thickness of paint film.
Mobile silica gel wheel can be easily installed or replaced, and accurately positioned, the height can read from the meter that make the operation get easier .
Electro light wheel and scraper can choose the different working model that make the operation get easier.
Equipped 5 sets inverter or you can choose the plc control system, they can be operated independently to get the precise accuracy.
UV Curved Surface Dryer is designed by ultraviolet radiation solidifying technology.It takes advantage of the characteristic of UV paint to solidify the UV paint in seconds and greatly shorten the production period.The height and angle of the lamps can be regulated randomly,so that you can light the workpiece by many sides and angles to achieve the effect of three-dimensional drying .It is widely used for wooden material,metal,glass and leather,etc.
Model: MF09
Min diameter of Arc band;40mm
Feeding speed 0.5-5.3m/min
Tape thickness 0.3-3.0mm
Working temperature 120-150 Degree
Total power: 765W
Glue pot measurement 270ML
Net/Gross weight 9.5/14kgs
Packing size: 465*430*515mm
EFCUT SCP60-6.5H chipper shredder is a smart V design for Max diameter 60mm fresh wood and tree branches chipping purpose. The material can be easily put into the cutting system and discharge without any jam up. 2 direct drive belt and a 6.5HP gasoline engine makes this machine more efficient in drum type series. If you are looking for a special and convenient chipper shredder, EFCUT SCP60-6.5H will be a nice choice.
EFCUT SCP100-15H Wood Chipper designed for maximum 100mm diameter fresh wood and tree branches cutting, which has powerful engine and effective chipping blades. We make every part with correct quality and looking for the best calibration, all of these works is to obtain a high quality achievement for the product.It can be widely used in garden, orchard and even in farm. Use the machine together with box trailer or garbage truck can achieve a better performance.Wherever has the tree plants, there should be an EFCUT chipper shredder. EFCUT wood chipper, it is more than a helper!
Place of Origin:Shandong, China (Mainland)
Model Number:plywood hot press
Power(W):37KW
Weight:7600KG, 7600kg
Warranty:2 Years
Platen size:2500*1300*42mm
Panel width:â?¥ 60 mm
Hot Oil Pump Power:wer:1.5kw
Pressure:100T
Dimension(L*W*H):3600*1700*2000mm
Certification:CE ISO
Total pressure:1000KN/100T
Cylinder No.& diameter: 6 - 100mm
Hydraulic Motor Power:5.5kw
Thermal oil furnace motor power:36kw
Brand:WFSEN
MZ73212 Two Rows Multi Spindle Woodworking Boring Drilling Machine With One Vertical Drilling Line,Website:http://www.luhongmachinery.com,Multi Spindle Drilling Machine
