FULL SILICONE RUBBER MATERIAL, FOR PROTECTING THE CABLE END, WATER PROOF CAP
SILICONE RUBBER MATERIAL, ROUND RINGS, FOR BINDING THE CABLE,LONG LIFE, HIGH ELASTICITY, EASY ELASTICITY RECOVERY
SILICON RUBBER MATERIAL,LONG LIFE, AND HIGH ELASTIC, SPECIALLY FOR BINDING THE CABLES AND PROTECTING THE CABLE.
Expansion joint,Expansion joint Supplier Size : DN50~DN1000  Pressure : Max 4.0 Mpa  Bellows : Carbon Steel / Stainless Steel  Other parts : Carbon Steel / Stainless Steel
Available with speckled colours and logos Available in a standard size or made to measure Varying thicknesses available Weather resistant Suitable for both indoor and outdoor areas Highly durable for short or long term use Easy to clean
Rubber Buffer Rubber buffer: can effectively bear all levels of load and deformation of wide range, suitable for all kinds of mechanical equipments, and vibration equipments. 1). Material: NR, SBR,NBR,CR,EPDM,Silicone,etc 2). Hardness: According to requirement 3). Size: The same as drawing or sample 4). Color: Black, gray, green, yellow, blue, red etc 5). Package: Inner in poly bags, outer packed in carton 6). Processing: Rubber molded 7). Function: Shock absorption
Rubber sheet Hardness:65+/-5a Tensile strength: 3mpa Elongation: 200% Density: 1.5 10m x 1.22m(max) x 3mm(min) Corrugated
It has good resistance of high temperature; nonpoisonous and tasteless which has no effect on health, it can be used in chemical , Electrical, fitness and other industries with different temperature conditions, temperature range is -60 to 200¡æ Name :rubber sheet Thickness: 1-30mm Width: 0.6-2m Length: 1-20m Application:industry grade, food grade Tensile strength: 6-12mpa Inner: plastic film, outer: woven bag
JIER Arch Rubber Fenders have been optimized for increased energy absorption, providing reliable and trouble free service for a wide variety of berths even under the most severe conditions. They are being widely used in port facility due to their high energy absorption and low reaction force and stable performance as well as high durability following simple structure. They are particularly useful for vessels with high allowable hull pressures and for locations where mounting space is limited. A variety of sizes and lengths are offered. JDA150X1000 ~JDA1000x2000
Jier cone rubber fender is the result of continuous product development. This fender design is based on the cell fender which was introduced to world-wide markets more than 25 years ago. This type of fender can be considered as the latest in state-of-the-art moulded fender products. Jco500~jco1800
www.finerfender.com http://www.finerfender.com/Marine-Fender-Products/super-cell-fender/ JIER Super Cell Rubber Fender is a well established fender type. This fender has a hollow cylindrical body with fully rubber-imbedded mounting flanges and is designed to deflect in an axial direction. Originally designed to replace cylindrical fenders, these fenders have more than 30 years track record with only some minor improvements over the years. Cell Rubber fenders are very robust and have been used for decades in many ports around the world. JSC400H ~JSC3000H
Www.Finerfender.Com Http://www.Finerfender.Com/marine-fender-products/cylindrical-fender/ Jier jcy series cylindrical rubber fenders are commonly used fenders recommended for all types of applications to ensure a safe and linear berthing to a variety of vessels. Adequate installation is simply achieved by using chains, bars, ropes or specially designed ladder brackets. Jcy150 ~jcy2000
shaped bore inside. Designed for use on tugs and barges, they offer long term durability for applications where repeated compression cycles are encountered in pushing service. They also offer the excellent physical characteristics needed to handle the high loading which occurs both on initial contact, and throughout the service cycle. Jd150x1000 ~jd500x3000
Colour, material, hardness, and others will be to order Inner in poly bags, outer packed in carton
Specification: Cas no.: 95-33-0 Einecs no.: 202-411-2 Chemical name: n-cyclohexyl-2-benzothiazole sulfenamide Appearance: pale yellow or gray powder Initial melting point(c>): 98 Heat loss(%): 0.3 Ash contant(%): 0.3 Residues on sieve (150m, %): 0.05. Application: --high performance after-effect accelerator --good property of scorching resistance --short curing time --mainly used for tire, rubber tubes, shoes, tapes and cables. 25kg kraft bag inner with pe bag or according to your requirements.
1. Color: Black mostly 2. Size: flat board (300 300mm, thickness 1-25mm) Size: Reel board (width 200mm, thickness 1-25mm) Size: Rubber sheets(Thickness 1-30mm, width 500-2000mm, Length: 5-20m) 3. Tensile strength: 4 MPA or 3 MPA 4. Specific gravity: 1.5+/-0.05g/cm3 and 1.6+/- 0.05g/cm3 5. Hardness: 75+/-5 Shore A and 65+/-5 Shore A 6. Elongation: 250% 7. Surface: smooth or cloth wave. Inner: plastic film, outer: woven bag or pack according to the requirements of the customers.
1. Color: Black, Green, Red and so on 2. Thickness: from 1mm to 25mm 3. Width: from 100mm to 2000mm 4. Length: standard 1m, 5m, 10m 5. Tensile strength: from 3 MPA or 8 MPA 6. Specific gravity: 1.5+/-0.05g/cm3 and 1.6+/- 0.05g/cm3 5. Hardness: 75+/-5 Shore A and 65+/-5 Shore A 7. Elongation: 250%min 8. Surface: smooth or cloth wave< DIV>. Inner: plastic film, outer: woven bag or pack according to the requirements of the customers.
Our rubber extrusion includes but not limited, D sponge Seal, Rubber bulb, rubber U channel, T section seal, Edge Trim, Flock lined rubber, flat square sponge rubber, window rubber etc. Packed in cartons
In a variety of different sizes. Durable seaworthy packing
Silicone tubings Durable seaworthy packing
