3ply face mask: 1 meltblown fabric, 2 non woven fabric KN95 face mask. with certificate
Item name:dental floss pick/toothpicks Item no.:ll-a01 Product instruction: 1)handle material:abs/ps/pp 2)dimension(lxwxh):78mmx25mmx2mm 3)floss material:ht fiber 4)finishing:automation 5)color:according to customer requirement 6)tension:over 10 kg 7)without any noise during use 8)oem service 9)net weight:0.8g Packing information: Blister card, opp bag, plastic bottle
Item name:interdental brush Item no.:ll-c01 Product instruction: 1)handle material:abs/ps/pp 2)dimension(lxwxh):82mmx20mmx8mm 3)bristle material:dupont nylon 4)wire:stainless 5)color:according to customer requirement 6)oem service 7)net weight:1.8g Packing information: Blister card, opp bag, plastic bottle
Item name:interdental brush Item no.:ll-d01 Product instruction: 1)handle material:abs/ps/pp 2)dimension(lxwxh):65mmx10mmx5mm 3)bristle material:dupont nylon 4)wire:stainless 5)color:according to customer requirement 6)oem service 7)net weight:1.0g Packing information: Blister card, opp bag, plastic bottle
Used to hold interphalangeal joints in correct alignment following distal joint injuries. It can go through x-ray, lightweight, strong ductility and radiating performance.
Voltage: 100-240V 50/60Hz Flow Rate: 0.5 to 10 lpm Oxygen Concentration: 93%¡À2% 0~7L 90%¡À2% 8L 80%¡À2% 10L Oxygen Outlet Pressure: 8.5 psig ¡À 5 psi Power Consumption: 500 W (average) Sound Level: 50 dBA Start-up test; Power failure alarm Accumulative time display LCD display Circuit breaker. Dimensions: 356 (W)* 305 (D)* 610(H) mm Weight: 20 kg. Packed in cartons,9sets/pallet.
Pulse Oximeter Oxyo is a Color monitor with 6 display modes, and 4 levels of brightness control available on this device. The SPO2 wave can be displayed in 2 ways according to user`s needs. Automatically power off after 4 seconds when finger out Color OLED monitor, 6 different display modes 4 level brightness. Pulse histogram and 2 kinds Spo2 wave display Easy to use & high accuracy and repetition Small in size, and easy to carry Low voltage alarm display Auto power-off after 4 seconds without signal Light weight of 55g, batteries included Runs on standard AAA batteries and continuous working time is 30 hours
Meditech FOs3+ is a Full Color high-clearance TFT monitor with 4 display modes and the brightness can be adjustable. Alarm sets for low voltage, abnormal SPO2 and PR. It will be automatically power off without signal. Inner flash memory sets for more than 30 hours data storage. Advanced software for sleep study and monitoring. Full Color monitor, (Pixels: 160*128, 256K color) 1.3" Built-in memory stores up to 24 hours of downloadable data (USB cable included). 4 different display modes Adjustable brightness settings. Built-in, switchable alarms for SpO2 and pulse rate. Pulse histogram and SpO2 wave display USB interface ensures convey of SpO2 data, (Wireless option) Easy to use & high accuracy Small in size, and easy to carry and Light weight of 45g, batteries included Battery voltage indication: color graph Auto power-off after 4 seconds without signal 3.7V Rechargeable Lithium Polymer Battery (Charger: USB and AC charger) Synchronous display on the oximeter and computer Inner flash memory for more than 30 hours data storage Advanced software for sleep study and monitoring Power consumption: less than 20mA (wireless and alarm not work).
This fingertip pulse oximeter is compact and light in weight, easy to use with only one-key operation. The internal alarm will function while low voltage. Automatically power off after 8 seconds when finger out. The continuous working time can be 39 hours. LED monitor for extended battery life SpO2 and pulse monitoring, and histogram of pulse display Easy to use with one-key operation Small in size, and easy to carry Low voltage alarm display Auto power-off after 8 seconds without signal Light weight of 50g, batteries included Runs on standard AAA batteries and continuous working time is 39 hours Display Format: LED SPO2:35-99% in two-digit 7-segment digital Pulse Ratio:30-240BPM in 3-digit 7-segment digital; Pulse Wave: 6-segment barograph; Battery Voltage Low Indication: LED signals Dimension:58(L) í- 30(W) í- 36(H) Weight:55g (including batteries) Power Requirements: 2 AAA size 1.5V Alkaline Batteries Power Consumption: less than 40mA. Resolution: í+1% for SPO2 and í+1 BPM for Pulse Ratio. Measurement Accuracy: í+2% in stage of 70%-99% SPO2 and meaningless when stage being smaller than 70%. í+2 BPM for Pulse Ratio. Measurement Performance in Weak Filling Condition: Oxy haemoglobin and pulse value can be shown correctly when pulse-filling ratio is 0.5%.
OxyS is a newly launched OLED fingertip pulse oximeter with 4 direction display modes, pulse histogram and 2kinds wave display, Alarm setting is available, it beeps when finger out, And auto power-off after 4 seconds without signal, well-designed appearance ,small in size and easy to use. Color OLED fingertip pulse oximeter, adopts latest technology, combines high quality with fashionable elements ensures well-designed appearance and steady function. 4 different display modes Pulse histogram and 2 kinds Spo2 wave display Alarm setting adjustable Beeps when finger out, Auto power-off after 4 seconds without signal Soft inside rubber design ensures a comfortable feeling when put finger in the monitor Easy to use & high accuracy and repetition Small in size, and easy to carry Low voltage alarm display Light weight of 55g, batteries included Runs on standard AAA batteries and continuous working time is 30 hours USB interface ensures convey of SpO2 data
Fuldigitabeam-forming and dynamic aperture technology ensure excellent image quality 80 elements, 32 channels, duasocket Scanning angle 8-16 leveadjustable Gamma correction, 8-segment gtc Automatic report generation normal/ob Abundant software packages for fulclinic applications such as abdominal, obstetric, gynecology, cardiology, urology, smalparts, etc. Ergonomic design, user-friendly Direct printout on a4 paper for long-time record storage Usb 2.0 interface ensures real-time image transfer to pc 430(l)íß390(w)íß410(h) mm
Urine bag -size: 2000ml -with bottom outlet & t valve -with non-return valve -with 120cm tube
Sutures Surgical sutures from USP6/0 to USP2, Catgut, PGA, Absorbable, with needle USP2 to USP6/0
Herbal extract
Specification of coke dry quenching: FC: 85% min Sulfur: 0.75% max Ash: 13.5% max VM: 1.5% max Moisture: 1% max Size: 0-1/0-2mm, 1-3/1-4mm, 10-30mm
Dry semi coke is used in chemical industry, smelting, gas production, civil heating and so on. It has the advantages of high fixed carbon, high specific resistivity, high chemical activity, low ash, low sulfur, low phosphorus and low water content, but at the same time the strength and crushing resistance of dry semi coke are relatively low. Specification of dry semi coke: FC: 83% min VM: 8% max Ash: 9% max Sulfur: 0.35% max Moisture: 1% max Size: 1-3mm, 1-4mm
Calcined petroleum coke is solid petroleum coke product with black and dark gray color, shine with metallic luster, porosity and composed with micro-graphite crystals. It is the carbon material in the form of granular, columnar and acicular. Application: 1. Calcined Petroleum Coke can be widely used for producing Anode Paste and Prebaked Carbon Anode for electrolytic Aluminium, application as additive in graphite electrode and carbon raiser production, also used as fuel for silicon. 2. Used as basic raw material for carbon additive and foaming agent. 3. Used in chemical industry as the basic source of sodium hydride and high pure CO. FC: 98.5% min Sulfur: 0.5% max Ash: 0.5% max VM: 0.5% max Moisture: 0.5% max Size: 1-5mm
Description: Graphite Petroleum Coke made from Calcined Petroleum Coke. Put calcined petroleum coke into graphitization furnace, to make graphite petroleum coke through graphitization process technology. Graphite is the most popular carbon raiser in market. Usage: Electrodes for electric arc furnaces. Recarburizer. Lubricants that resist very high temperatures. Refractory linings. Brake pads. Electric batteries. Specification of graphite petroleum coke/artificial graphite/GPC: FC: 98.5% Sulfur: 0.05%/0.35% Ash: 0.50% VM: 0.5%/1% Moisture: 0.5% Size: 0.2-1mm, 1-5mm
Semi coke, also called gas coke, lam coke, is made from high grade Jurassic coal, under a high temperature(1300â??) process. They are widely used for calcium carbide, ferro alloys manufacture or non-ferrous metals smelting, manufacture or other related metallurgical industries, because of its special physical and chemical characteristics: high fixed carbon content, low sulfur and low phosphorus for content. Semi coke powder can be used in blast furnace instead of coal injection in steel-making ; â?¢ 0-8mm semi coke can be used for sintering Mn ore in process of production SiMn; or using in other sinter mill. â?¢ 6-18mm semi coke can be used in producing Ferro nickel , Ferro silicon ,Calcium Carbide and other ferro alloys. Sepcification of semi coke: FC: 84% min Ash: 9% max VM: 8% max Sulfur: 0.4% max Moisture: 15% max Size: 6-18mm, 18-35mm, 10-30mm, 30-60mm
Specification of metallurgical coke: FC: 85% min Ash: 13% max Sulfur: 0.8% max Moisture: 14% max VM: 1.5% max Size: 5-15mm, 10-30mm, 20-40mm, 30-80mm
