1. Introduction: This machine is used for making rectangular / square paper tube. It consists of integral paper reel stand, bottom ply wax lubricating stand, glue stand, spiral winding unit, inline cutting unit with dust collecting device and tube discharging unit. One mandrel will be delivered with machine. 2.Features: This machine owns below features: Japan Mitsubishi PLC and Inverter Japan Mitsubishi 6 inches touching panel Japan Mitsubishi Servo motor Japan THK brand high-speed screw Stainless steel glue tank and stainless steel glue scraper Automatic angle adjustment of winding unit (main machine). Very easy operation. 3. Main specification: Model: SANSPT-PLC250 Tube side length: 18mm-250mm Tube wall thickness: 3-7mm Paper reel stand: Integral paper reel stand with electric crane. Speed: 3-10m/min (depends on tube size,material quality, operator skills) Pressure roller: 12pcs (3pcs for each side) In-line cutting length: Adjustable, no more than 2500mm In-line cutting tolerance: ±1.5mm Cutting method: Automatically cut with single circular saw Glue method: Double surface gluing Power: 15KW/380V/50HZ/3phases Weight: ~4000kg Dimension: 4200mmX1500mmX1800mm
Video:https://youtu.be/E2EJK_BtDA0 1. Introduction: This machine is used for polishing paper tube to make tube surface smooth, and coating wax on tube surface. The polished&wax-coated tubes are use for winding high quality winding materials. The machine is controlled by Mitsubishi PLC and inverter. 2. Main specification: Model: SANPWC-152 Tube diameter: 76mm-152mm Speed: 5-8m/min(if polish&wax-coating ID76 tube) Power: 35KW/380V/50HZ/3 phases Weight: ~5000kg Dimension: 18000mmX2000mmX1600mm
Full Automatic textile cardboard Cones Machine for Paper Cone Manufacturer is a fully auto paper cone production line for textile industry. It is controlled by Delta PLC. It consists of paper cone winding unit, electric heating drying oven, and paper cone finishing unit. The whole paper cone production process is as follows, Jumbo paper reel feeding Inside and outside printing Paper edge grinding paper cutting paper cone winding & trimming Paper cone drying Unfinished products collecting V-shaped notching Line pressing Head curling (Bull nosing) Grinding Final products collecting. Full Automatic cardboard cones Machine for Paper Cone Manufacturer Technical parameters Speed: 48pcs/min Cone size: 5deg.57, 4deg.20 or 3deg.30 (optional) Applicable paper: 320-450gsm Applicable glue: white glue Compressed air: 1.2m3/min, 0.8MPa Power: 47KW/380V/50HZ/3Phases Operator: 2~3persons/shift Weight: ~15T Needed working space: 14000mm X 8000mm X 5000mm
1. Brief description Automatic paper cone machine is full automatic paper cone production line for textile industry. It is controlled by PLC. It can complete the whole paper cone production flow chart automatically, Jumbo paper reel feedingInside and outside printingPaper edge grindingpaper cutting paper cone winding Paper cone dryingUnfinished products collecting V-shaped cuttingLine pressingHead curling(Bull nosing)FlockingFinal products collecting. One set of mold will be delivered with machine. 2. Technical parameters Max. Speed: 48pcs/min (normal practical speed 40pcs/min) Cone size: 4deg.20&5deg.57 Applicable paper: 320-450gsm Applicable glue: white glue/Tapioca starch glue Compressed air: 1.2m3/min, 0.8MPa Power: 54.05KW/380V/50HZ/3Phases Operator: 2~3persons/shift Weight: ~13T Needed working space: 14000mm X 7000mm X 4000mm
Introduction: DTY tube are mainly used for winding spinning on textile industry.It is a full automatic production line for DTY tubes. Productive Process: Tube Winding Conveyor --- Pre Drying --- Conveyor --- Accurate Cutting---Conveyor --- Curling & Slotting --- Conveyor--- Main Drying --- Cooling ---Conveyor--- Package Product List: No. Name Quantity 1 Spiral Paper Tube Making Machine 1 Set (Paper Tube Making Machine+ Paper Reel Stand +Gluing Stand ) 2 Dryer 1 Set (Pre Drying + Main Drying+ Cooling) 3 Conveyor 5 Lines 4 Automatic Paper Tube Recutter 1 set 5 Paper Tube Finishing Machine 1 set Main Features: -- Work Stable and Easy Adjustment.Tube Winding controlled by Delta PLC, DeltaI inverter and Delta Touching Panel. --High Efficiency and Safety. Tube cutting drivenby servo motor, smooth incision, uniformity in paper seam and stable in length. --Reasonable Designed Structure,large output,low cost.The dryer driven by chain, Intergated line from pre-drying to main drying. -- Full Automation.Using high speed PVC belt Conveyor, detected by photoelectric sensor.Tube conveying automatically. --Easy Operate,work Stable.Paper slitting and rewinding using pneumatic brake and electric paper roll adjustment and rectification. --Save labor, High Production and low energy consumption.tube head curling no need operator,full automatic control,production speed: 60 pieces/min.
1.Introduction: This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. The small paper rolls are used to produce edge protector, paper tube etc.It has automatic blade position adjustment , edge blowing device, edge correcting controller and hydraulic paper loading/unloading system.1 pieces of pneumatic core shafts will be delivered together with machine. The machine owns below features: Mitsubishi PLC and Inverter. Mitsubishi touching panel. Mitsubishi MT40 Tension controller Mitsubishi Detector Taiwan Magnetic powder brake 2.Main specification: Model: SANJSR-02 Jumbo roll max.width: 1600mm Jumbo roll max.diameter: 1500mm Jumbo roll core diameter: 76.2mm Finished roll min.width: 50 mm Finished roll max.diameter: 1300mm Paper range: 50~700gsm Speed: Max 250m/min Blade: 20 pairs Power: 7.5KW/380V/50HZ/3 phases Weight: ~3000kgs Dimension: Unwinder:2000mm*3500mm*1200mm, Rewinder: 3000mm*2500mm*1500mm
1. Brief description Automatic paper cone machine is full automatic paper cone production line for textile industry. It is controlled by PLC. It can complete the whole paper cone production flow chart automatically, Jumbo paper reel feedingInside and outside printingPaper edge grindingpaper cutting paper cone winding Paper cone dryingUnfinished products collecting V-shaped cuttingLine pressingHead curling(Bull nosing)FlockingFinal products collecting. One set of mold will be delivered with machine. 2. Technical parameters Max. Speed: 48pcs/min (normal practical speed 40pcs/min) Cone size: 4deg.20&5deg.57 Applicable paper: 320-450gsm Applicable glue: white glue/Tapioca starch glue Compressed air: 1.2m3/min, 0.8MPa Power: 54.05KW/380V/50HZ/3Phases Operator: 2~3persons/shift Weight: ~13T Needed working space: 14000mm X 7000mm X 4000mm
Video:https://youtu.be/X27-eqvHHuQ Brief description: paper tube cutting machine This machine is used for cutting long tube into small pieces with required length. It is an necessary machine for producing yarn tubes (DTY tubes), tape cores, composite can body, etc. Technical parameters: Model: CM-H Inner diameter of applicable tube: 40mm-100mm Length of applicable tube: 80mm-1600mm Thickness of applicable tube wall: â?¤8mm Speed: 5-7 times/min Power: 1.5kW x 6 steps, 380V Weight: ~0.7T Dimension: 2,200mm x 800mm x 1,200mm
1. Brief description Automatic paper cone machine is full automatic paper cone production line for textile industry. It is controlled by PLC. It can complete the whole paper cone production flow chart automatically, Jumbo paper reel feedingInside and outside printingPaper edge grindingpaper cutting paper cone winding Paper cone dryingUnfinished products collecting V-shaped cuttingLine pressingHead curling(Bull nosing)FlockingFinal products collecting. One set of mold will be delivered with machine. 2. Technical parameters Max. Speed: 48pcs/min (normal practical speed 40pcs/min) Cone size: 4deg.20&5deg.57 Applicable paper: 320-450gsm Applicable glue: white glue/Tapioca starch glue Compressed air: 1.2m3/min, 0.8MPa Power: 54.05KW/380V/50HZ/3Phases Operator: 2~3persons/shift Weight: ~13T Needed working space: 14000mm X 7000mm X 4000mm
sheet metal Slip roll machine parameter is below: Model max. Thickness max. Width dia. Of roll packing dimension g.W./n.W. W01-0.8x305 0.8mm 305mm 25mm 454x24x28cm 14.5/13kg W01-0.8x610 0.8mm 610 mm 38 mm 95x27x38 cm 40/37kg W01-0.8x915 0.8mm 915mm 50mm 134x34x50cm 98/80kg W01-0.8x1000 0.8mm 1000mm 50mm 148x35x50cm 107/86kg W01-0.8x1300 0.8mm 1300mm 60mm 180x50x50cm , 156x42x13 195/172, 27/20 W01-1.5x915 1.5mm 915mm 50mm 134x45x54cm 120/95kg W01-1.5x1300 1.5mm 1300mm 75mm 175x53x63cm 275/245kg W01-2x610 2mm 610mm 60mm 126x68x118cm 210/166kg W01-2x1000 2mm 610mm 60mm 155x65x118cm 240/200kg Company Infromation Qingdao Pingyang International Trading Co., Ltd., was established in 2014,a famous and professional slip roll machine supplier. we are located in Qingdao, north of China. Our factory near the Qingdao Liuting International Air Port and Huangdao Sea Port,the traffic is very convenient. Which specializes in Industrial Casters. Bead Roller Machine . Hand Trolley. Corner Guards . Wire Springs . If you want to get high quality slip roll machine, please visit Qingdao Pingyang International Trading Co., Ltd. Contact Us If you want to get more information about Qingdao Pingyang or slip roll machine.please feel free to contact us as follows.we will feedback to you within 24 hours
Features 1. Folding with a max. Angle of 90 degree 2. Sectional fingers allow box and pan works 3. The 3-in-1 machine is used for households or factories. 4. The processing range of this series product is 200mm-1320mm 5. Our multiple functional 3-in-1 machine features shearing, bending, winding drum, and easy operation. Model;3-in-1/200 3-in-1/305 3-in-1/610 3-in-1/760 3-in-1/1016 3-in-1/1067 Bed width(mm) 200 305 610 760 1016 1067 Max.Shearing thickness(mm) 1.0 1.0 1.0 1.0 1.0 1.0 Max.Hending thickness(mm) 1.0 1.0 1.0 1.0 1.0 1.0 Max.Bending angle 90� 90� 90� 90� 90� 90� Max.Rolling thickness(mm) 1.0 1.0 1.0 1.0 1.0 1.0 Min.Rolling dia.(mm) 29 39 39 39 43 43 Packing size(cm) 54x24x28 49x33x42 84x41x86 100x41x66 137x45x72 139x54x78 N.W./g.W.(kg) 19/20 43/45 112/123 136/153 195/215 276/297
We specialized in powder coating equipment over a decade year, with good quality and competitive price. We are national high-tech enterprise and got 13 technical patents in this field. Our products have been exported to dozens of countries and regions, such as usa, uk, japan, france, russia, balares, australia, denmark, canada, mexico, saudi, arabia, jordan, armenia, malaysia, singapore, kuwait, morocco, uae, isreal, new zealand, macedonia, etc. Characteristic of powder coating booth: 1, the area of spray booth will be confirmed according to actual working condition. 2, we will continue to improve our products, please consult us to confirm actual size and configuration. 3, single-station coating booth with 1 recovery system, 2 stations coating booth with 2 stagger recovery system. Call me, let's talk more.
Introduction: We are specilized in powder coating line over decade years, designed and exported kinds of powder coating line for varied products. Choose the most suitable powder coating line according to your actual condition. Mode 1: manual powder coating: Mode 2: full automatic powder coating line: Mode 3: semi-automatic powder coating line: Mode 4: a common used automatic powder coating line: Mode 5: the small circulation spraying chain and curing oven with 2 sides openning 1, if you are ready to spray the workpieces with a large size or irregular shape, and requires high yield and quality, manual powder coating line will be a good choice. 2, if you spray a large quantity of workpieces with similar size and shape, and you have adequate budget, in order to achieve high yield , full automatic coating line is your best choice, you can even let your automatic coating line 24 hours non-stop running (three shifts of workers) to improve your production capacity. 3, if you spray workpieces with similar size and shape, and manual spraying production capacity can not meet your needs, you can choose affordable semi-automatic coating line. It does not require huge investments (spraying robot or coating line is expensive), and t get the production capacity close to full automatic coating line. If you interested in our products, please feel free to contact me. We can customized all kinds of equipments about powder coating and provide you a solution according to your actual conditions. Call me, let's talk more!
1) DC-150 Sleeve Labeling Machine is custom built to meet the exacting demands of manufacturers and suppliers. It can be used stand alone or integrated in-line and matching filling equipment speeds. 2) It is built upon a framework of seam welded, food grade stainless steel section. This solid foundation keeps movement and vibration to an absolute minimum to ensure consistent, accurate labeling.
Adopt mature PLC control system technology, make the whole machine stable and high-speed Can be suitable for square /round/oval flat bottles at the same time Use touch screen control system, make operation simple, practical and efficient Upgraded butterfly labeling station design, can be applied for conical bottle labeling Screw adjust the suppression mechanism,high accuracy Synchronization chain mechanism, to ensure smooth and precise calibration Transparent sticker labeling without foam,adhesive sticker labeling without wrinkle Widely used and multi-function with high flexibility Date/code printer is for optional Transparent label sensor is for optional Can be customized according to your requirement
Automatic Filling line widely used in liquid of Chemical ,Medical , Agrochemical industry ,especially for Corrosive liquid and Foam Liquid, such as:Hand sanitizer,Gel,Detergent,Laundry Soap Liquid,Shampoo,Lotion,Disinfectants, Bleach,Toilet cleaning liquid,Acid,Sodium Hypochlorite,Liquid Iodophor,Hydrogen Peroxide,Alcohol and Liquid fertilizer,Pesticide, etc filliing bottle capacity from 50ml to 50L.
1. Tri- Sorter (Triple Separator) 2. Bi-Sorter (Dual Separator)
Microseismic Jolt Squeeze molding machine is suitable for mass production of small castings.The machine adopts microseismic squeeze mechanism, the squeeze force and compression strength design is relatively large, so it can meet the requirements of simple or complex type without presqueeze. sand casting, also known as sand molded casting, is a metal casting process characterized by using sand as the mold material. The term "sand casting" can also refer to an object produced via the sand casting process. Sand castings are produced in specialized factories called foundries. Over 60% of all metal castings are produced via sand casting process. Molds made of sand are relatively cheap, and sufficiently refractory even for steel foundry use. In addition to the sand, a suitable bonding agent (usually clay) is mixed or occurs with the sand. The mixture is moistened, typically with water, but sometimes with other substances, to develop the strength and plasticity of the clay and to make the aggregate suitable for molding. The sand is typically contained in a system of frames or mold boxes known as a flask. The mold cavities and gate system are created by compacting the sand around models called patterns, by carving directly into the sand, or by 3D printing.
ZD1210 pneumatic(hydraulic) multi-contact finger internal compaction microseism molding machine introduction: the machine for a variety of foundry sand molding clay. the machine can be used stand-along,but also the composition of the use of mechanized assembly line,composed of semi-automatic production line can also be used. using the multi-contact pneumatic compaction,moderate pressure,contact the number of 48,suitable for modeling complex model. the local contact pressure when a shock compacted sand,and together with the shock table,the high hardness and uniform sand.this machine adopts pneumatic spring fully buffered microseism body,it is no special requirement on the ground. from the machine axis synchronous mode using link structure governor oil pressure,since the synchronization mode,and speed control easily.
Advanced and reliable double vibration motor self-synchronization and high reliability of vibration resistant welding structure and process; The frame body is made of steel plate with excellent resistance to brittle crack under dynamic load, and after annealing, it has good vibration resistance. The vibration motor is embedded in the side part of the frame with a groove and tenon structure, which can bear the dynamic load and is convenient for disassembly and maintenance:Easy to assemble and assemble, the equipment is low in height, easy to install, and can be designed according to user needs.
