This machine is used for polishing paper tube to make tube surface smooth, and coating wax on tube surface. The polished&wax-coated tubes are use for winding high quality winding materials. The machine is controlled by Mitsubishi PLC and inverter. Main specification: ModelSANPWC-152 Tube diameter76mm-152mm Speed5-8m/min(if polish&wax-coating ID76 tube) Power35KW/380V/50HZ/3 phases Weight~5000kg Dimension18000mmX2000mmX1600mm
Part 1 Equipment introduction The paper can assembly machine adopts advanced forming process, can complete a variety of forming processes, and can completely replace manual operation procedures. The equipment has strong stability and high production efficiency, and can one-to-one operation,thus liberating labor force to a large extent. The equipment has the advantages of saving raw materials and low energy consumption. Stable structure operation,forming stable and low noise. It is easier and faster to replace the mold. Part 2 Advantage characteristics Solving the problem of multi-manual operation in the traditional flat-bottomed paper can assembly process. The equipment can automatically complete the labeling, inside curling, sealing, and scraping operations. With high efficiency, high stability, high quality, assembly work high intelligence, can be unmanned operation and other performance characteristics.
Product Description This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. It has auto. deviation correcting system, auto. tension control system, paper edge blower device, auto. paper loading/unloading system.2pcs air-expansion shaft will be delivered together with machine. The machine owns below features: Siemens PLC WeiLun touching panel. DuoChuan servo motor SINNE Inverter Auto. Tension controller Taiwan Magnetic powder brake
Thermocouple assembling machine The machine is used for assembling thermocouples automatically. It consists of paper tube delivering device, tube holding device, tube parting device, thermocouple Head delivering device, thermocouple assembling device, gluing device, thermocouple discharge device. Technical Parameter: Model SANTA-A Paper Tube Length 300-1200mm Paper Tube Inner Diameter 16-20mm Paper Tube Outer Diameter 28-31mm Thermocouple Assembling Speed 700-900pcs/hour Power 1.5kw Dimension 3300x2700x1300
This production line adopts polyethylene (PE) material extrusion machine for film coating. The PE material is absorbed to material canister by automatic drying and material absorbing device. Then the material would be melted, after filter, the melted PE is distributed evenly onto the T shape mould. And finally it can be coated onto base material evenly. Features: This is the advance model of PE coating machine. It has multi-extrusion mould, multi- working station, The coating and compouding can be done by one step. Our machine are using Siemens PLC for easy setting and operation, all parameter can be set by the touch screen.
This machine is used for punching metal sheet into metal cover/lid. The produced cover/lid is used for making canisters. The machine is controlled by PLC and servo motor. 1 set of punching mold will be delivered together with machine. Extra mold needs extra payment. MAIN SPECIFICATION ModelSANYP-1000*1000 Punching pressure80T Speed60times/min Work table transverse&Longitudinal travel1000mm Power3.7KW/380V/50HZ/3 phases Weight~2500kgs Dimension1600mmX1200mmX800mm
1.Introduction: This machine is used for punching on paper tube. It is easy operate and efficient. This is the website about how it works:https://youtu.be/adTehQmLLuI Main features ModelSANPTD-152 Tube diameter50-200mm Tube thickness3-30mm
This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. The small paper rolls are used to produce edge protector, paper tube etc.It has automatic blade position adjustment , edge blowing device, edge correcting controller and hydraulic paper loading/unloading system.1 pieces of pneumatic core shafts will be delivered together with machine. The machine owns below features: Mitsubishi PLC and Inverter. Mitsubishi touching panel. Mitsubishi MT40 Tension controller Mitsubishi Detector Taiwan Magnetic powder brake Main specification: Model:SANJSR-02 Jumbo roll max.width :1600mm Jumbo roll max.diameter:1500mm Jumbo roll core diameter:76.2mm Finished roll min.width:50 mm Finished roll max.diameter:1300mm Paper range:50~700gsm Speed:Max 250m/min Blade:20 pairs Power:7.5KW/380V/50HZ/3 phases Weight:~3000kgs Dimension:Unwinder:2000mm*3500mm*1200mm, Rewinder: 3000mm*2500mm*1500mm
This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. The small paper rolls are used to produce edge protector, paper tube etc.It has automatic blade position adjustment , edge blowing device, edge correcting controller and hydraulic paper loading/unloading system.1 pieces of pneumatic core shafts will be delivered together with machine. The machine owns below features: Mitsubishi PLC and Inverter. Mitsubishi touching panel. Mitsubishi MT40 Tension controller Mitsubishi Detector Taiwan Magnetic powder brake Main specification: Model:SANJSR-02 Jumbo roll max.width :1600mm Jumbo roll max.diameter:1500mm Jumbo roll core diameter:76.2mm Finished roll min.width:50 mm Finished roll max.diameter:1300mm Paper range:50~700gsm Speed:Max 250m/min Blade:20 pairs Power:7.5KW/380V/50HZ/3 phases Weight:~3000kgs Dimension:Unwinder:2000mm*3500mm*1200mm, Rewinder: 3000mm*2500mm*1500mm
1. Brief description This machine is a fully automatic paper cone production line for textile industry. It consists of paper cone winding unit, cone drier, and paper cone finishing unit. The complete production process:Jumbo paper reel feedingInside and outside printingPaper edge grindingpaper cuttingpaper cone winding&trimming Paper cone dryingUnfinished products collectingHead curling(Bull nosing)Grinding V-shaped notchingLine pressingFinal products collecting. One set of cone mold will be delivered together with the machine. Extra mold needs extra payment. Configurations&Features -- Controlled by Delta PLC, Delta Inverter, and Delta touching panel -- Paper cutting driven by Taiwan Airtac cylinders. Durable&Easy adjustment -- Paper patterns delivered by Precision linear module driven by servo motor. High-precision& Long service life -- Sucking paper on spindle by Japan Orion vacuum pump. Long service time -- Cone winding driven by Delta servo motor. Rolling circle can be set freely. Winding tightly. -- New vertical type cone finishing machine: Simple machine, not complex. Machine runs very stably. Easy operate, less maintenance. Only a few of parts need to be changed when cone size changes. -- If you need to produce different size cone, only need to change 2pcs mold and adjust the position of paper cutting blades. Very easy and convenient.
INTRODUCTION This machine is used for making round top & bottom lid for paper drum. specification Model:SANLM-450 Paper Tube Diameter: Ï?280mm-Ï?500mm Function: making round top&bottom lid for paper drum.. Speed:70pcs/hour Motor Power: 1.1KW/380V/50HZ/3Phase Weight: ~400KG
1. Introduction: The machine is used for producing parallel paper drums automatically. It consists of paper stand, gluing device (automatic cycle system with gear pump), paper cutting device, tube/drum winder, drum cutting device, tube/drum discharging device. This machine vacuum-absorbs paper on mandrel automatically. The mandrel is retractable/collapsible mandrel which will make drum discharging easily from mandrel. The machine is controlled by Siemens PLC, Touching panel and Delta inverter. One mandrel is with machine. Extra mandrel needs extra payment. 2. Technical parameter: Model: SANPT250-650 Size of jumbo paper roll: 850mmx1300mm (Width*Dia.) Paper drum length: 850mm Paper drum inner diameter: 250mm-650mm Paper drum thickness: Normal 1.5-10mm. (Operator can set it according to actual need.) Paper grammage: 200-550gsm Production speed: ~1800pcs/shift(8hours)(The more diameter and thickness, the lower production speed.) Number of knife: 3pcs Power: 7.45KW/380V/50HZ/3Phases Dimension: 3200X2600x1500mm
Introduction This machine is used for curling edge for paper drum. Specification Model:ZDJB-450 Paper Tube Diameter: Ï?280mm-Ï?450mm Speed :120pcs/hour Motor Power:3.3KW/380V/50HZ/3Phase Weight: ~800KG
Introduction This machine is used for seaming bottom and curling edge for paper drum. Specification: Model FD-600 Paper Tube Diameter Ï?350mm-Ï?600mm Speed 60pcs/hour Motor Power 4KW/380V/50HZ/3phase Weight ~1500KG
Introduction This machine is used for gluing the cover and bottom through pressure. Specification: Model YD-450 Paper Tube Diameter Ï?280mm-Ï?450mm Speed 40pcs/hour Motor Power 5.0KW/380V/50HZ/3Phase Weight ~700KG
Introduction: This machine is used for curling drum top automatically. Specification: Model ZDJB-450 Paper Tube Diameter Ï?280mm-Ï?450mm Speed 120pcs/hour Motor Power 3.3kKW/380V/50HZ/3Phase Weight ~800kg
Introduction: This machine is used for rolling wrinkles at the top and bottom of drum body and cover. Specification: Model:GB-450 Paper Tube Diameter:Ï?280mm-Ï?450mm Speed:100pcs/hour Motor Power:0.55KW/380V/50HZ/3Phase Weight: ~180KG
1.Introduction: This machine is used for cutting square paper drum into different widths ,rolling circle indentation 2.Technical parameter: Power:1.1kw Paper drum diameter:250-400mm Paper drum thickness:3mm Max cutting width:250mm Speed:150-200pcs/h
Introduction: This machine is used for winding paper drum.It has following features:auto. slitting paper, auto feeding paper,auto gluing ,auto heating glue,auto cutting paper ,auto winding drum, auto discharging drum. The machine is controlled by PLC. Specification: Paper Tube Diameter:Ï?280mm-Ï?450mm Function: making paper drum Speed : 180pcs/hour Power:9KW/380V/50HZ/3Phase Pressure:1.0Mpa Weight:~2500kg
1.Introduction: This machine is used for shrinking square corner for paper drum 2.Technical parameter: Power 2.2kw Weight 600kg Paper drum diameter 280-400mm Paper drum thickness 3mm Speed 150pcs/h
