Traditional OLP protection requires four valuable core resources. However, in many places, due to insufficient fiber resources, it is impossible to provide excess fiber resources and optical line redundancy protection. In view of the shortage of optical fiber resources and need to optical line redundancy protection, our company has developed BIDI OLP equipment to solve the problem of optical line protection in the case of insufficient optical cable resources. OLP-BIDI only needs two fibers to realize the optical line protection function. When the main circuit fiber fails, the receiving end automatically switches to the standby fiber receiving, ensuring communication without blocking operation, improving communication system stability and reliability. It also saves fiber resources. Optical line protection switch provides both Manual and Automatic switching mode. In Manual mode, the system switches optical path only based on the commands from user. In the Automatic mode, the system switches based on the power level detected and the preset threshold. Under automatic mode, the system can be set to be revertive or Non-revertive modes. Under Revertive mode, the system switches back to the working path automatically after the fault condition is cleared. Under Non-revertive mode, the system does not switch back.The OLP models fit HT6000 Series CH04, CH08, CH20 Chassis.
CAT6/CAT6A U/UTP Ethernet RJ45 Patch cord, SNAGLESS Strain relief Boot, AWG26 Stranded 1. Cat5e UTP Patch cord, with two modelded RJ45 Plug 3u' Gold plated, 2. Unshielded twisted Cable, 4*2*AWG26 Cable, OD=5.2MM, OFC Copper conductor, (CCA available as well). 3, Compliant with EIA/TIA 568B, EN50173, AND ISO/IEC 11801, 4. Connect way: 1: 1 or Crossover for option, 5. Excellent Fluke test data, low Attenuation and high NEXT, RL etc, Pass Fluke Patch cord test 6. Suitable for 100MHz High speed Data transmission, Gigabit Ethernet, TP-PMD, 7. UL or cUL Listed, compliant with CMX, CM, CMR 8. Have full series popular Strain relief Mould for Choice,
Optic fiber cable specifications 1. Up to 144 fibers 2. Light weight, less additional load to tower. The maximum span can reach 1500m. 3. Strong anti-pull performance, more than 90KN. 4. Non metallic structure provides good insulation, excellent lightning resistant. 5. Equal distribution of aramid yarns with good production process, excellent stress/strain performance. 6. Excellent bullet resistant performance 7. Excellent tracking resistant performance. 8. Installation wuthout power off and the normal transmission of cable won't be influenced by power line fault
Can be installed without shutting off the power Excellent AT performance ,The Maximum inductive at the operating point of AT sheath can reach 25 KV Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops Large Span lengths and the largest span is over 1000m Accurate control on Aramid application greatly improving the strength of cables Accurate fiber excess length and stranding pitch to ensure the good performance of tensile strength and the temperature The design life span is over 30 years ADSS cable structure ADSS cable is the short form for All-dielectric Self-supporting Optical Cable. ADSS fiber optic cable is loose tube stranded; the tubes are filled with water resistant filling compound. The tubes are stranded around fiber reinforced plastic are a non-metallic central strength member into a compact and circular cable core. After the ADSS cable core is filled with filling compound, it is covered with a thin PE inner sheath, after two layers of Aramid yarns which are applied in two directions over the inner sheath as strength member, ADSS optical fiber cable is completed with PE or AT outer sheath.
Traditional OLP protection requires four valuable core resources. However, in many places, due to insufficient fiber resources, it is impossible to provide excess fiber resources and optical line redundancy protection. Can we use OLP in single fiber solution In view of the shortage of optical fiber resources and need to optical line redundancy protection, our company has developed BIDI OLP equipment to solve the problem of optical line protection in the case of insufficient optical cable resources. OLP-BIDI only needs two fibers to realize the optical line protection function. When the main circuit fiber fails, the receiving end automatically switches to the standby fiber receiving, ensuring communication without blocking operation, improving communication system stability and reliability. It also saves fiber resources.
32 ports EDFA with WDM: JDSU pump laser with Double Power Supply
SHBDM-1 explosion-proof cable gland or steel pipe wiring 1. Made of copper or stainless steel material, copper surface can be passivated or nickel plated. 2. Adopt mechanical cable-clamped device. 3. Suitable for increased safety enclosure as cable entry.  Customization is accept!! We also have female and male cable glands adopter. Product features Execution standard:GB3836.1,GB3636.3 Explosion proof mark:ExdIIC Gb Thread:Metric is standard,if there is special requirement,such as G,NPT thread,please specify When ordering. Product materials:304SS,316L,H62 M thread,G thread,PG thread,NPT thread can all be provided. Optional accessories:Lock nut,earth tag,PVC Shroud,and so on.
Optical adapters are the most commonly used optical passive components in optical fiber communication systems. Most optical adapters are made up of three parts: two optical connectors and a coupler. The two fiber optic connectors fit into two fiber ends; the coupler acts as a bushing. In addition, the coupler usually match with metal or non-metallic flange, in order to facilitate installing and fixing the connector. Quick Details: Place of Origin: Shenzhen, China (Mainland) Brand Name: Optico; Model Number: SC/APC SM Adapter SX; Product name: SC/APC fiber optic adapter; Application: Telecommunication; Type: Simplex, Single mode; Material: Plastic; Certification: ISO9001; Wavelength: 1310nm/1490nm/1550nm; MOQ: 200 pcs;
FTTH Fiber Optic Patch Panel with SC/APC connector & adapter, 30M cable length Quick Details of FTTH Patch Panel: Place of Origin: Shenzhen, China (Mainland) Brand Name: OPTICO Model Number: FTTH Patch Panel material: ABS adaptor: SC external dimension: L86xW86xD27mm mode: SM&MM standard: Telecom Standard stye: FTTH mini terminal box Port: 2 port pakcing: 1 set/OPP bag, suitable quantity per carton box; delivery: 7~12 days. Payment Terms: T/T, West Union, L/C; 30% deposit, 70% balance; Price Terms: FOB Shenzhen 2.5~3.5USD/set;(with SC/APC connector&adapter, 30m cable length) Application of FTTH Patch Panel: A user end product to realize optical fiber to desktop solution; It can be used in home or working area to accomplish double-core fiber access and port output; Used in the end termination of residential buildings and villas, to fix and splice with pigtails; Used in FTTH indoor application, home or work area; Provide users with optical access or data access; Suitable for 2 pcs SC adapters; May store surplus fiber inside, easy for operation;
Materials:Brass nickel planted or SS304/316 Thread :M,PG,G,NPT Size from M8 to M110,PG7 to PG63,G1/2 to G3,NPT1/2 to NPT 3 Metal cable gland standard with different size,and cusztomization is accepted. Long thread cable gland can be provided,too,and for OEM is ok. Can also provide high temperature cable gland of Silicon rubber materials. Mutiple hole cable gland,and flat cable can be made. It is used for anti-corrosion,waterproof,dust-proof environment to provide sealing and fix of cable. Welcome to contact with us
HBDM-10A Explosion-proof cable gland ( Non-armored cable) Specification Materials:Brass or Stainless steel Sealing materials:Silicon rubber,Neoprene Explosion mark:Exd IIC Gb/Exe II IP66 It is with mechanical cable clamping seal Fireproof grade:V0(UL94) Environment condition:Zone1,Zone2 IIA-IIC Explosive gas atmosphere,it is widely used in petroleum, chemical, warehouse, food, pharmaceutical, military and other electrical cable fixing and sealing. Mode M G NPT SHBDM-10A-01 M20*1.5 G1/2 NPT1/2 SHBDM-10A-02 M25*1.5 G3/4 NPT3/4 SHBDM-10A-03 M32*1.5 G1 NPT1 SHBDM-10A-04 M40*1.5 G1 1/4 NPT1 1/4 SHBDM-10A-05 M50*1.5 G1-1/2 NPT1 1/2 SHBDM-10A-06 M63*1.5 G2 NPT2 SHBDM-10A-07 M75*1.5 G2 1/2 NPT2 1/2 SHBDM-10A-08 M85*1.5 G3 NPT3 SHBDM-10A-09 M90*1.5 G4 NPT4 Customization is accepted.
Industrial cable glands with inner thread (Double-compression, armored cable) Specification Materials:Brass or stainless steel ,brass with nickel planted Sealing materials:Silicon rubber,Neoprene,Teflon,PA6 Explosion mark:Exd IIC Gb/Exe II Gb/Ex tD A21 IP68 Fireproof grade:V0(UL94) Environment condition:Zone1,Zone2 IIA-IIC Explosive gas atmosphere,Strict21,22 inflammable dust environment,it is Widely used in oil extraction, refining, chemical, military and so on hazardous environment places cable clamping and sealing. Mode M G SH-BDM-24-01 M20*1.5A G1/2A SH-BDM-24-02 M20*1.5B G1/2B SH-BDM-24-03 M20*1.5C G1/2C SH-BDM-24-04 M25*1.5B G3/4B SH-BDM-24-05 M25*1.5C G3/4C SH-BDM-24-06 M32*1.5B G1B SH-BDM-24-07 M32*1.5C G1C SH-BDM-24-08 M40*1.5B G1 1/4B SH-BDM-24-09 M40*1.5C G1 1/4C SH-BDM-24-10 M50*1.5B G1 1/2B SH-BDM-24-11 M50*1.5C G1 1/2C SH-BDM-24-12 M63*1.5B G2B SH-BDM-24-13 M63*1.5C G2C SH-BDM-24-14 M75*1.5B G2 1/2B SH-BDM-24-15 M75*1.5C G2 1/2C SH-BDM-24-16 M90*1.5 G3 SH-BDM-24-17 M115*1.5 G4 NPT thread can also be provided if needed. Customization is accepted!!
Materials:Brass,Stainless steel 304,316 Surface treatment:Nickel planted,Passivation Sealing materials:Silicon rubber,Neoprene,Teflon,PA6 Explosion mark:Exd IIC Gb/Exe II Gb/Ex tD A21 IP68 Fireproof grade:V0(UL94) Protection level:IP68 (screwed-on the cap) Ambient temperature:Static from -60 to 100,short up to 120 Dynamic from -20 to 80,short up to 100 without halide. Environment condition:Zone1,Zone2 IIA-IIC Explosive gas atmosphere,Strict21,22 inflammable dust environment,it is widely used in petroleum, chemical, warehouse, food, pharmaceutical, military and other electrical cable fixing and sealing. For thread,M thread,G thread,NPT thread can all be provided. For details,welcome to check our website:www.exproofcablegland.com If some requirement,welcome to contact with us.
JARCH is a professional manufacturer of slip rings, cable reel, hose reel, carbon brush and rotary joints,founded in 1998,located in Baoan,Shenzhen,with more than 80 employees and 1000m2 plant. We have 8 types of patented products at present and have established extensive and long-term cooperation with many domestic research institutes(Beijing University,SAS,,Beihang University,etc), and own a skilled management team.To creat the brand and do famous brand,we carry out strict performance ISO9001 standard of CQC. Our slip rings are widely used in civil and military fields ranging from robot,spacecrafts, industrial automation, electric power generation, measurement instruments, medial equipments to building construction. Our main products have fiber optic rotary joint / Electro optical slip ring/ through bore slip ring/ Pneumatic electric rotary union/ Hydraulic rotary union/through bore slip ring/ Pneumatic rotary joint,etc. Our products are sold to more than thirty provinces in China and exported to more than 38 countries. Our main customers have Huawei,Foxconn,Sany Heavy Industry,BYD,etc. OEM and ODM are highly welcome! Email: nico@szjarch.cn
Materials:Brass,Stainless steel 304,316 Surface treatment:Nickel planted,Passivation Sealing materials:Silicon rubber,Neoprene,Teflon,PA6 Explosion mark:Exd IIC Gb/Exe II Gb/Ex tD A21 IP68 Fireproof grade:V0(UL94) Protection level:IP68 (screwed-on the cap) Ambient temperature:Static from -60 to 100,short up to 120 Dynamic from -20 to 80,short up to 100 without halide. Environment condition:Zone1,Zone2 IIA-IIC Explosive gas atmosphere,Strict21,22 inflammable dust environment,it is widely used in petroleum, chemical, warehouse, food, pharmaceutical, military and other electrical cable fixing and sealing. For thread,M thread,G thread,NPT thread can all be provided. For details,welcome to check our website:www.exproofcablegland.com If some requirement,welcome to contact with us.
Materials:Brass,Stainless steel 304,316,brass with nickel planted Sealing materials:Silicon rubber (-60 ~ +80) Explosion mark:Exd IIC Gb/Exe II IP66 Fireproof grade:V0(UL94) When installing cable,it will flameproof diaphragm seal in inner sheath; With quick installation,safety,reliability,and other characteristics of good protection; It is suitable for clamping and fixing various types of armored cables. Environment condition:Zone1,Zone2 IIA-IIC Explosive gas atmosphere,it is widely used in petroleum, chemical, warehouse, food, pharmaceutical, military and other electrical cable fixing and sealing. For size,we can provide M16-M115,G1/2-G5,NPT1/2-NPT5 cable gland. Customization is accepted!! For details,please check our website:www.exproofcablegland.com Welcome to contact with us by mail:sh1@sanhuiex-electric.com
Cable glands accessories which is equip for the glands as requirement. 1.Washer 2.Lock nut 3.Earth tag 4. PVC shroud 4.enlarger and reducer 5.Serrated washer 6.Red fibre washer 7.Hexagon stopping plug. If some requirement,welcome to contact with us:sh1@sanhuiex-electric.com For more details,please check www.exproofcablegland.com
Materials:Brass or stainless steel ,brass with nickel planted Sealing materials:Silicon rubber,Neoprene,Teflon,PA6 Explosion mark:Exd IIC Gb/Exe II Gb/Ex tD A21 IP68 Fireproof grade:V0(UL94) Environment condition:Zone1,Zone2 IIA-IIC Explosive gas atmosphere,Strict21,22 inflammable dust environment,it is Widely used in oil extraction, refining, chemical, military and so on hazardous environment places cable clamping and sealing.
Material:Brass,nickel plated,SS304/316 Claw:PA Sealing and sealing ring:NBR Approvals:CE Protection degree:IP68 Temperature Resistance:-40 to 100,short time to 120 Thread length:Standard thread type is used for the equipment which has inner thread or for the thin board.Long thread type is used for the thin board.Long thread type is used for the thick board. Function:Extremely easy installation,simply insert cable through the assembled gland and tighten gland lock nut until cable is secured.These cable glands are designed to withstand water,dust,salt,acid-base,alcohol,oil and common solvent. Notes:Customization is available. The cable accessories for cable glands can also be provided. M thread cable glands,PG thread cableglands,G thread cable glands,NPT thread cable glands can all be provided. If needed,we also provide nylon cable glands
armored fiber cableï¼? 1-coreï¼? armored FTTX cableï¼? base station Item Unit Dimention Optic fiber mm 0.60±0.05 Spiral armored layer mm 1.2±0.10 Aramid yarn decitex 1100 Outer jacket mm 2.0±0.10 Applications Used in FTTX, from residence to data center and cabling level and vertical, also used in FTTH cable Used in communications in data center, during ODF with armored patch cord and pigtail Used in the open field, connections between optical equipment Used in base station, for BBU to RRU Features Mini armored layer used to decrease the outer diameter and cable weight, also convenient for cabling and installation. Cable using high property aramid yarn, increasing tension property, and fit for long distance application. Cable using spiral metal armored layer with best crush property, and cable is very flexible and easy bend PE/PVC/LSZH/PU jacket material fit for different environments.
