304 stainless steel is the most common stainless steel. The steel contains both chromium (between 1520%) and nickel (between 210.5%)metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel and is essentially non-magnetic. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.
304 Stainless Steel Woven Wire Mesh Cloth is made of High quality soft 304 Stainless Steel Wire. Wire Materials: 302, 304, 304L, 316, 316L Typical Weaving Patterns of Stainless Steel Wire Mesh: Plain Weave, Twill Weave, Dutch Weave Characteristic of Stainless Steel Wire Cloth: Excellent acid and alkali resistant, Anti-corrosion and heat resistance, Wear
A dependable and durable solution, the RJ45 coupler is backed Not sure what Network Cable Adapters are right for your situation See our other network adapters Finder to discover your perfect match.
Cat 6 RJ45 Modular Plug for Solid Wire is backed by Not sure what Network Cable Adapters are right for your situation See our other network adapters Finder to discover your perfect match.
The STC-GG001 4-Position 3.5mm to dual 3.5mm Headset Splitter Adapter features one 3.5mm Female and two 3.5mm Male connectors, enabling you to connect a 4-position headset with Audio and microphone input to your PC or Laptop. This 3.5mm Headset Splitter Adapter connects to both the audio and mic ports on your desktop or laptop computer, providing a single (4-Position) female connector - a perfect solution for online gaming or use with VOIP applications (Skype, and chat programs).
Easy to use and install Add two standard A Female ports to the back of your computer Guaranteed reliability Add a USB-A female port to the back of your PC or on a faceplate Not sure what Internal USB Cables & Panel Mount USB Cables is right for your situation See our other USB 2.0 Cables to discover your perfect match.
Main technical parameters : * Optical fiber external diameter: 0.9mm, 2.0mm, 3.0mm are optional, and PC, UPC and APC are available, there are two kinds of single mode and multi-mode. * Insertion loss: 0.2dB * Echo Loss: PC 40dB,UPC 50dB,APC 60dB * Exchangeability test: 0.2dB * Vibration test: 0.1dB (10-60Hz, 1.5mm amplitude) * Tensile strength test: 0.1dB (0-15Hg tension, excluding 0.9mm optical fiber) * High temperature test: 0.2dB (+85 C, lasting 100 hours) * Low temperature test: 0.2dB (-40 C, lasting 100 hours) * Temperature cycling test: 0.2dB (-40 ~85 C, after 5 cycles) * Humidity test: 0.2dB (+25~+65, relative humidity 93%, 100 hours later) * Commonly used connectors: SC (large head)/LC (small head/FC (spiral port)/ST (card port) Scope of application : * Optical Fiber Communication System, Optical Fiber Access Network, Optical Fiber Data Transmission, Optical Fiber CATV, Local Area Network (LAN), Testing Equipment production of optical fiber cable : FTTH Optical Fiber to Home, Trunk to Home, FTTH Distribution Box, Corridor Box, Optical Splitter Box, Optical Fiber Stripping Clamp, Tail Fiber, Jump Line, Optical Fiber Adapter, Coupler, Fused Fiber Disk, Optical Fiber Panel, ODF Box, Adapter, Optical Fiber Flange, Optical Fiber Coupler, Optical Fiber Desktop Box, Optical Fiber Cold Connector, Optical Fiber Fast Connector, ODF Unit Box, Integrated Module, Optical Fiber Fused Fiber Communications products such as pipes, wiring frames, indoor and outdoor junction boxes, cabinets, etc. Specification parameter : Jacket material LSZH,PVC,OFRN,ORNP Fiber type SingleMode 9/125 Inserion Loss 60db Certification ROHS; ISO Length Customized Plug in and out 500 times Storage temperature -50 ~85
Hexagonal bolt M12xl.5x60 P/N 43023112060 S-Pipe: Outside, Right Hand, Weld, 7500 117063-7500 MAN33.373DFC steering * steering knuckle bearing ND3128 general purpose * waterpump assembly Casing power tong accessories TQ340-35Y connector 22 *650 24.400-03 Brake device accessories ZJ-32J low speed friction wheel AY50178 GLAND, Eexe ARMORED CABLE 83444-06 55909-12-12 VALVED NIPPLE 3/4", QD AEROQUIP 79388 SWITCH,PRESSURE,IBOP Electric control box FKQ6406-6 chain 10A-3*106 Plug:Orifice 10-32 X .055 Mdl:Ps350/500 93018-14 35Ã??70 BOP AccessoriesFZ35-70 gate assembly 4" JK212-40S-8 S01-1278-01N VALVE : LOGIC,NORMALLY OPEN 30176409-4XN BBFS1-300 Flame-proof single phase fan Insert valve 2.2.08.011 Ordinary nozzle JZS 4-9mm 91251-3 SHIM, BEARING RETAINER Drill pipe power tong accessories ZQ203-125 flange SHIM, COMPOUND RETAINER 109586-4 109528 BRAKE CALIPER: TDS-9S DISC BRAKE 50106-14-C SCREW, CAP-SOC HD (UNC) Casing power tong accessories TQ340-35 Quick release valve KPJ-L10 E2B2000 R2000 PR122/P-LSI WHR 3P 30152845 PIN: DT12897 NUT, ROTARY TABLE, ZP 375, HH ZP001.13 Electric control box FKQ6406Shockproof pressure transmitter YPQ-01-Z/40B Pin:Secondary Retention Dia1.0 30172725-1 Azimuth/inclination logging toolGPIT-SH Schlumberger Drill pipe clamp accessories ZQ203-100 High pressure oil ball head 010804-04M Pin Retainer Collapsible Link 30170045 GT350E Chassis*Rear SteelBoard assembly Drill pipe power pliers accessories ZQ203 pipe plug 100 0105-19M PVC pipe d20mm Winch intermediate shaft accessories ZJ45 Hexagon socket screw M12*25 BOLT SHOULDER SOCKET 30179918 VOLVOFM12 chassis*Cab tilt cylinder H15-520220-08-08 TIMKEN bearing 24122EJW33C3 Axial spring retainer GB894-86-160 Hydraulic tank accessories F-1300 Oil filter assembly AH100101061000 90875 WASHER,FLAT,THRUST,1.01X2.0X.125 Touring car hook accessories DG350 inner spring 103.04.13 Bearing 35x72x23 1.10.03.030 16/25YT/GZ-20 120681 gear, bull helical Hydraulic tank accessories F-1300 Right angle connector NPT3 T511-1002 SEAL GASKET BOMCO AH130101-0411 15GZ-30 Seal Kit: Accumulator 2" Bore Piston RK0200K000 VOLVOFM12 chassis*Small cab shock absorber INTERFACE ETHERNET MV3000 MODIFIED E18233 NB800G.05.11 Bonnet Power system accessories THS5500TXJ3 guide belt BK-GB-2 156500007 heater BGY2-220/2 Drill pipe tong accessories ZQ203-100 front cover 02-09M BEARING NU 1044 MA/C4 00A06C007.025 Filter:Suction 7805265 Washer:Lock (20mm) 86872-20-S MAN33.373DFC Engine*Engine Cylinder Head Screws Drilling rig top drive accessoriesDQ70-A circuit breaker NSX160F 1.23.03.561 FILTER, HI PRESS, 6 MIC, 1-1/4, 6092 PSI H12612 NK400E cooling appliance*Variable amplitude control solenoid valve GT550E Universal*BoomFriction plate Benz 2530 engine * valve cover gasket Drill pipe tong accessories ZQ203-125 external connection block 19.750-08 Drill pipe tong accessories ZQ203-100 Gear Z=22 m=12 0102-11M
This product is used to connect the distribution cable and the incoming cable, is widely applied in communication, network systems, CATV cable TV and so on. It adopts scientifically formulated engineering plastic and be shaped by injection molding, with anti-aging, anti-corrosion, flame retardant, waterproof, anti-vibration and anti-shock effects. Can effectively prevent the optic fibers from the influence of outdoor environment.
Traditional OLP protection requires four valuable core resources. However, in many places, due to insufficient fiber resources, it is impossible to provide excess fiber resources and optical line redundancy protection. In view of the shortage of optical fiber resources and need to optical line redundancy protection, our company has developed BIDI OLP equipment to solve the problem of optical line protection in the case of insufficient optical cable resources. OLP-BIDI only needs two fibers to realize the optical line protection function. When the main circuit fiber fails, the receiving end automatically switches to the standby fiber receiving, ensuring communication without blocking operation, improving communication system stability and reliability. It also saves fiber resources. Optical line protection switch provides both Manual and Automatic switching mode. In Manual mode, the system switches optical path only based on the commands from user. In the Automatic mode, the system switches based on the power level detected and the preset threshold. Under automatic mode, the system can be set to be revertive or Non-revertive modes. Under Revertive mode, the system switches back to the working path automatically after the fault condition is cleared. Under Non-revertive mode, the system does not switch back.The OLP models fit HT6000 Series CH04, CH08, CH20 Chassis.
CAT6/CAT6A U/UTP Ethernet RJ45 Patch cord, SNAGLESS Strain relief Boot, AWG26 Stranded 1. Cat5e UTP Patch cord, with two modelded RJ45 Plug 3u' Gold plated, 2. Unshielded twisted Cable, 4*2*AWG26 Cable, OD=5.2MM, OFC Copper conductor, (CCA available as well). 3, Compliant with EIA/TIA 568B, EN50173, AND ISO/IEC 11801, 4. Connect way: 1: 1 or Crossover for option, 5. Excellent Fluke test data, low Attenuation and high NEXT, RL etc, Pass Fluke Patch cord test 6. Suitable for 100MHz High speed Data transmission, Gigabit Ethernet, TP-PMD, 7. UL or cUL Listed, compliant with CMX, CM, CMR 8. Have full series popular Strain relief Mould for Choice,
Optic fiber cable specifications 1. Up to 144 fibers 2. Light weight, less additional load to tower. The maximum span can reach 1500m. 3. Strong anti-pull performance, more than 90KN. 4. Non metallic structure provides good insulation, excellent lightning resistant. 5. Equal distribution of aramid yarns with good production process, excellent stress/strain performance. 6. Excellent bullet resistant performance 7. Excellent tracking resistant performance. 8. Installation wuthout power off and the normal transmission of cable won't be influenced by power line fault
Can be installed without shutting off the power Excellent AT performance ,The Maximum inductive at the operating point of AT sheath can reach 25 KV Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops Large Span lengths and the largest span is over 1000m Accurate control on Aramid application greatly improving the strength of cables Accurate fiber excess length and stranding pitch to ensure the good performance of tensile strength and the temperature The design life span is over 30 years ADSS cable structure ADSS cable is the short form for All-dielectric Self-supporting Optical Cable. ADSS fiber optic cable is loose tube stranded; the tubes are filled with water resistant filling compound. The tubes are stranded around fiber reinforced plastic are a non-metallic central strength member into a compact and circular cable core. After the ADSS cable core is filled with filling compound, it is covered with a thin PE inner sheath, after two layers of Aramid yarns which are applied in two directions over the inner sheath as strength member, ADSS optical fiber cable is completed with PE or AT outer sheath.
Traditional OLP protection requires four valuable core resources. However, in many places, due to insufficient fiber resources, it is impossible to provide excess fiber resources and optical line redundancy protection. Can we use OLP in single fiber solution In view of the shortage of optical fiber resources and need to optical line redundancy protection, our company has developed BIDI OLP equipment to solve the problem of optical line protection in the case of insufficient optical cable resources. OLP-BIDI only needs two fibers to realize the optical line protection function. When the main circuit fiber fails, the receiving end automatically switches to the standby fiber receiving, ensuring communication without blocking operation, improving communication system stability and reliability. It also saves fiber resources.
The fibers, 125μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. Then the cable core is covered with a thin polyethylene (PE) inner sheath, which is filled with jelly to protect it from water ingress. After a corrugated steel tape armor is applied, the cable is completed with a PE outer sheath.
32 ports EDFA with WDM: JDSU pump laser with Double Power Supply
SHBDM-1 explosion-proof cable gland or steel pipe wiring 1. Made of copper or stainless steel material, copper surface can be passivated or nickel plated. 2. Adopt mechanical cable-clamped device. 3. Suitable for increased safety enclosure as cable entry.  Customization is accept!! We also have female and male cable glands adopter. Product features Execution standard:GB3836.1,GB3636.3 Explosion proof mark:ExdIIC Gb Thread:Metric is standard,if there is special requirement,such as G,NPT thread,please specify When ordering. Product materials:304SS,316L,H62 M thread,G thread,PG thread,NPT thread can all be provided. Optional accessories:Lock nut,earth tag,PVC Shroud,and so on.
Optical adapters are the most commonly used optical passive components in optical fiber communication systems. Most optical adapters are made up of three parts: two optical connectors and a coupler. The two fiber optic connectors fit into two fiber ends; the coupler acts as a bushing. In addition, the coupler usually match with metal or non-metallic flange, in order to facilitate installing and fixing the connector. Quick Details: Place of Origin: Shenzhen, China (Mainland) Brand Name: Optico; Model Number: SC/APC SM Adapter SX; Product name: SC/APC fiber optic adapter; Application: Telecommunication; Type: Simplex, Single mode; Material: Plastic; Certification: ISO9001; Wavelength: 1310nm/1490nm/1550nm; MOQ: 200 pcs;
FTTH Fiber Optic Patch Panel with SC/APC connector & adapter, 30M cable length Quick Details of FTTH Patch Panel: Place of Origin: Shenzhen, China (Mainland) Brand Name: OPTICO Model Number: FTTH Patch Panel material: ABS adaptor: SC external dimension: L86xW86xD27mm mode: SM&MM standard: Telecom Standard stye: FTTH mini terminal box Port: 2 port pakcing: 1 set/OPP bag, suitable quantity per carton box; delivery: 7~12 days. Payment Terms: T/T, West Union, L/C; 30% deposit, 70% balance; Price Terms: FOB Shenzhen 2.5~3.5USD/set;(with SC/APC connector&adapter, 30m cable length) Application of FTTH Patch Panel: A user end product to realize optical fiber to desktop solution; It can be used in home or working area to accomplish double-core fiber access and port output; Used in the end termination of residential buildings and villas, to fix and splice with pigtails; Used in FTTH indoor application, home or work area; Provide users with optical access or data access; Suitable for 2 pcs SC adapters; May store surplus fiber inside, easy for operation;
Materials:Brass nickel planted or SS304/316 Thread :M,PG,G,NPT Size from M8 to M110,PG7 to PG63,G1/2 to G3,NPT1/2 to NPT 3 Metal cable gland standard with different size,and cusztomization is accepted. Long thread cable gland can be provided,too,and for OEM is ok. Can also provide high temperature cable gland of Silicon rubber materials. Mutiple hole cable gland,and flat cable can be made. It is used for anti-corrosion,waterproof,dust-proof environment to provide sealing and fix of cable. Welcome to contact with us
