Welded mesh fabric Welded mesh fabric used for the reinforcement of concrete is manufactured to international standard specifications. Features: 1welded mesh reinforcing sheets are the most commonly used form of reinforcing in concrete and is particularly suited for flat slab construction and concrete surface beds. Other design applications would be: Retaining walls Shear walls Beams and columns. Concrete paving overlays Suspended floor slabs Swimming pool and sp rayed concrete reinforcing 2welded mesh sheets can be detailed as either flat or bend sheets depending on the contract requirements. 3welded mesh sheets can be fabricated to non-standard sizes depending on contract requirements. 4welded mesh reinforcement reduces construction time considerably by eliminating the tying of reinforcing bars on site. 5designated fabric mats are standard welded reinforcing sheets and can be scheduled simply by reference to the fabric type, sheet dimensions and in instances where bend material is required the bending shape code. (the reference is the nominal mass of the fabric in kg/m x 100) 6the cold-rolled deformed wire used in welded mesh reinforcement fabric has a minimum characteristic strength (0.2% proof stress) of 485 mpa compared to 450 mpa for high tensile rebar. Reinforcing fabric may be used at higher stresses than high tensile rebar resulting in material saving of up to
Anping Tenglu Metal Wire Mesh Co.,LTD Inconel Wire Mesh Product Description: Inconel Mesh has excellent resistance to carburization, pitting and crevice corrosion, stress corrosion cracking and oxidation. It is resistant to a wide range of corrosive media such as organic, inorganic compounds, acids and alkali. It possesses high temperature mechanical strength, creeping resistance and long service life. Inconel 600 Mesh: Alloy 600 has outstanding resistance to heat, oxidizing and corrosive media and offers performance temperature up to 2000oF. It is resistant to SCC and reducing media and has good mechanical characteristics from cryogenic to high temperatures. Inconel 601 Mesh: Inconel 601 has great oxidation resistance up to 1250oC or 2200oF. It is called as a high temperature mesh material offering good spalling resistance, creeping strength and high temperature stability. It maintains ductility even after prolong service. Inconel 617 Mesh: Alloy 617 offers elevated temperature oxidation and corrosion resistance up to 1800of. It offers high mechanical strength and great metallurgical stability. The alloy is resist to pitting and crevice corrosion and variety of strong acids such as hydrochloric acid, hydrofluoric acid, sulfuric acid and nitric acid. Inconel 625 Mesh: It is a high strength engineered material for outstanding corrosion and oxidation resistance at the elevated temperatures up to 1093oC or 2000oF. Inconel 718 Mesh: Alloy 718 is a precipitation hardened material for providing great high temperature corrosion resistance properties and mechanical strength. It has outstanding resistance to creeping and SCC up to 982oC.
Polyurethane Vibrating Screen Mesh is widely used for the classification of bulk material, such as coal, minerals, coke, beans, etc. So it can be used in the agriculture, chemical industry, minerals, quarry and smelting industries. vivian at redstarfactory dot com Polyurethane vibrating screen can sort the wet materials, it can be used in the water conservancy and hydropower and dewatering industries.
High Grade Dutch Weave Stainless Steel Micron Wire Mesh Hebei Maishi Wire Mesh Manufacture Group has been producing wire mesh over 30 years and we always support our customers high grade Micron Wire Mesh. Favorable price and best customer service make us win more than 90% repeat orders , welcome to contact us if you have inquiry for stainless steel wire mesh. Material: 201, 304, 316, 316L , 430 etc Normal mesh sieze: plain dutch weave:10X64mesh to 80X700mesh; twill dutch weave:20x250mesh to 400X2800mesh; reversed dutch weave: 48x10mesh to 720x150mesh. Other weave type is also available: plain weave: 0.5X0.5mesh to 635X635 mesh; twill weave:20x20mesh to 400x400mesh; Wire diameter:0.025mm-1.8mm Apeature: 0.038mm-10.9mm Roll width:0.9144m,1.0m,1.22m,1.524m,1.83m,etc. any width available at request. Roll length:30m or 50m,any length available at request. Sample:Free sample sent on request. Performance : Corrosion-resisting, Wear-resisting, Tear-resisting. Uses: Mainly used for Separation and Flitration, extensively used in petroleum, chemical industry, enviroment protection,mine, airspace, paper-making, electronic, metallurgy etc. 1. Plain Weave: also called tabby weave, linen weav or taffeta weave, is the most basic type of weaves. In plain weave, the warp and weft are aligned so they form a simple criss-cross pattern. Each weft thread crosses the warp threads by going over one, then under the next, and so on. The next weft thread goes under the warp threads that its neighbor went over, and vice versa. 2. Twill Weave: In a twill weave, each weft or filling yarn floats across the warp yarns in a progression of interlaces to the right or left, forming a distinct diagonal line. This diagonal line is also known as a wale. A float is the portion of a yarn that crosses over two or more yarns from the opposite direction. 3. Plain Dutch Weave: similar with plain weave, just the weft and warp wire have different wire diameter and different mesh size. 4. Twill Dutch Weave: similar with twill weave, just the weft and warp wire have different wire diameter and different mesh size. 5. Reversed Dutch Weave: difference from standard Dutch weave lies in the thicker warp wires and less weft wires. Package details for Micron Wire Mesh: Inside the roll with "paper tube" to reduce the pressure while loading; Then wrapped with "plastic film" as well as the "woven bag" on the finished roll, Final loaded in the strong wooden case or as customers' requirement Payment: 100%T/T in advance if order amount less thanUSD10000.00, 30%paid in advance and 70%paid before shipment if order amount more than USD10000.00. L/C payment is workable. Any other payment term can be negotiatory
food grade stainless steel wire mesh screen mesh Hebei Maishi Wire Mesh Manufacture Group supplys Wire Mesh with good quality,favorable price and best service, is one of the leading manufactures of wire mesh in China and has been exporting wire mesh to more than 90 countries. Welcome to contact us if you have inquiry. Material: 304, 316 Normal mesh sieze: plain weave: 0.5X0.5mesh to 635X635 mesh; twill weave:20x20mesh to 400x400mesh; plain dutch weave:10X64mesh to 80X700mesh; twill dutch weave:20x250mesh to 400X2800mesh; reversed dutch weave: 48x10mesh to 720x150mesh. Wire diameter:0.025mm-1.8mm Roll width:0.9144m,1.0m,1.22m,1.524m,1.83m,etc. any width available at request. Roll length:30m or 50m,any length available at request. Sample:Free sample sent on request. 1. Plain Weave: also called tabby weave, linen weav or taffeta weave, is the most basic type of weaves. In plain weave, the warp and weft are aligned so they form a simple criss-cross pattern. Each weft thread crosses the warp threads by going over one, then under the next, and so on. The next weft thread goes under the warp threads that its neighbor went over, and vice versa. 2. Twill Weave: In a twill weave, each weft or filling yarn floats across the warp yarns in a progression of interlaces to the right or left, forming a distinct diagonal line. This diagonal line is also known as a wale. A float is the portion of a yarn that crosses over two or more yarns from the opposite direction. 3. Plain Dutch Weave: similar with plain weave, just the weft and warp wire have different wire diameter and different mesh size. 4. Twill Dutch Weave: similar with twill weave, just the weft and warp wire have different wire diameter and different mesh size. 5. Reversed Dutch Weave: difference from standard Dutch weave lies in the thicker warp wires and less weft wires. HEBEI MAISHI have strict test before the goods dispatched from our factory to ensure the Package details for wire mesh: Inside the roll with "paper tube" to reduce the pressure while loading; Then wrapped with "plastic film" as well as the "woven bag" on the finished roll, Final loaded in the strong wooden case or as customers' requirement Payment: 100%T/T in advance if order amount less thanUSD10000.00, 30%paid in advance and 70%paid before shipment if order amount more than USD10000.00. L/C payment is workable. Any other payment term can be negotiatory We welcome the need to communicate with our sales staff specifications and meshes, we will be happy to cooperate with you.
Ss wire mesh screen mesh MAISHI Wire Mesh Manufacture Group is a professional wire mesh manufacturer in China and has produced screen wire mesh since 1986. our main market is USA, Germany etc. And we have strict quality control system to ensure the mesh quality. If you need mesh product (including deep processing product), please do not hesitate to contact us.We will do our best to support you. Ss wire mesh screen mesh Material: SS304,SS316 Stainless Steel Wire Ss wire mesh screen mesh Weave Type: Plain weave, Twilled weave, Dutch weave Wire Diameter: 0.025-1.8mm Performance : Corrosion-resisting, Wear-resisting, Tear-resisting Uses: Mainly used for Filter, protect, Food industry, Chemical industry and so on. Special size and specification are available according to customers requirment. Feature: 1. Acid and alkali resistance 2. Corrosion and rust resistance 3. High resistance due to tight wire position 4. Extreme low absolute grade of fineness (down to 5 - 6 m) 5. Heat resistance 1. Plain Weave: also called tabby weave, linen weav or taffeta weave, is the most basic type of weaves. In plain weave, the warp and weft are aligned so they form a simple criss-cross pattern. Each weft thread crosses the warp threads by going over one, then under the next, and so on. The next weft thread goes under the warp threads that its neighbor went over, and vice versa. 2. Twill Weave: In a twill weave, each weft or filling yarn floats across the warp yarns in a progression of interlaces to the right or left, forming a distinct diagonal line. This diagonal line is also known as a wale. A float is the portion of a yarn that crosses over two or more yarns from the opposite direction. 3. Plain Dutch Weave: similar with plain weave, just the weft and warp wire have different wire diameter and different mesh size. 4. Twill Dutch Weave: similar with twill weave, just the weft and warp wire have different wire diameter and different mesh size. 5. Reversed Dutch Weave: difference from standard Dutch weave lies in the thicker warp wires and less weft wires.
SLN Lashing Straps comply with 12195-2 standard, Lashing Straps have the quality to secure all your loads safely. Extension maximum 7 %. Belt Width25mm-100mm Length 0.5M-12M W.L.L. 0.5T-10T ColorOrange or Blue or as Customer demands StandardEN12195-2; Ratchet typeNormal plastic or aluminium handle or Ergo plastic or aluminium handle End FittingD J Hook, flat hook, E track fitting, triangle hook
Galvanized In-Line Wire Strainer For Grape Stand In Agriculture They are used to keep your fence wire tight. This is done via re-tightening the tension of the wire whenever it becomes slack. This fence strainer can be used to tighten poly wires, barbed wire and high tensile wire. In-line wire strainers keep your wire fence in top shape with minimal effort. Wire Strainer Specifications For high tensile wires up to 200,000 PSI Heavy cast cog with spring loaded latch Hot dipped galvanized - No raw uncoated steel edges Here is the sample below gor strainer wire: An in-line wire strainer allows you to keep up to 4,000 feet of high tensile wire tight by allowing you to re-tension the wire whenever it is required. You need at least one wire strainer per fence wire, more strainers depending upon length of the wire. Once installed you simply tighten the in-line wire strainer using a ratchet handle. The Clip Wire Strainer is used to tighten steel wire on electric/wire fence or vineyard trellising. Aluminum alloy ratchet for ease of wire alignment Protrusion design on ratchet allows attach to a pre-strained wire, no need to cut wire before straining Ideal for straining old fence or for tensioning of trellising wire Heavily galvanized steel hanger, zinc coating 275 g/m2 , and high-tensile steel wire clip, heavily galvanized 200 g/m2 for long life Use with strainer handle We could provide package such as bubble bag,PVC/PET blister,Color box,PE bag with lable/head card,Display box etc. Every product is strongly packed by carton box with foam inside Shipping way: 1) By sea through Tianjin XinGang Port (FCL,LCL) 2) By air through Tianjin or Beijing airport 3) By express(TNT,DHL,FEDEX) Any interesting,will service for you 24 hoursx7 days!
Light duty steel mesh framed expanded polystyrene panel is made of polystyrene foam plastic plate, and both sides are coverd high tensile steel wire mesh panel.The steel wire mesh is diagonally inserted accross polystyrene plate with galvanized steel wire,3D EPS panel is connected by spot welding.Our products are followed our National Standard JGJ/T 269-2012. EPS Plate Main Performance Index Item Performance Index Test Way Apparent Density(kg/m3) 18~22 GB/T 6343 Thermal Coefficient [W/(m*K)] 0.039 GB/T 10294 or GB/T 10295 Compressive Strength 0.10 GB/T 8813 Tensile strength perpendicular to the direction of the plate (Mpa) 0.10 JG 149 Dimensional Stability (%) 0.50 GB/T 8811 Water Absorption (%)4 GB/T 8810 Class of combustion performance Not less than C class GB 8624 The thickness of EPS plate:50mm,70mm,100mm,120mm etc The width is 1200mm,and length 6000mm External dimension of EPS plate and allowable deviation should be accorded with below: External size(mm) Permissible deviation Length ,width 1000~2000 ±6.0 2001~4000 ±8.0 >4000 Positive deviation is not stipulated,-10 Thickness 50~75 ±2.0 76~100 ±3.0 >100 ±4.0 Diagonal difference 1000~2000 5.0 2001~4000 10.0 >4000 13.0 The steel wire mesh of 3D EPS plate and galvanized steel wire for inserting is adopt low carbon steel wire,and the standard value of tensil strength(fstk) is not less 550N/sqmm,the design of tensil strength(fy) is around 320N/sqmm, modulus of elasticity(Es) should adopt 2.0*105N/sqmm. The wire diameter of 3D EPS plate steel wire mesh is not less than 2.2mm,the mesh size is 50x50mm.Galvanized steel wire for inserting is not less than 3.0mm,others shouls accord to the rule of National Standard General purpose low carbon steel wire GB/T 343. The steel wire Main Technical Index Wire diameter Tensile Strength (N/sqmm) Reverse bending test( No) Zinc coated (g/sqm) Application Nominal Actual 2.2 2.23+0.05 550 6 ____________ Warp and weft wire for mesh 3.0 3.03+0.05 4 3.0 3.03+0.05 122 Steel wire 3.8 3.83+0.05 Note:Reverse bending test is the number of reversed bending 180 degrees. 3D EPS steel wire mesh panel permissible deviation Item permissible deviation (mm/10m) Length ±10.0 Width ±10.0 Diagonal difference ±10.0 Minimum tensile resistance of spot welding Item Wire between with wire of mesh panel Inserted steel wire between with steel wire mesh panel Wire diameter (mm) 2.2 3.3 3.0 and 2.2 3.8 and 3.0 Min Tensile strength of welding spot(N) 400 500 2140 3430 The3D EPS steel wire mesh panels tensile strength , elongation and cold bend of test way should be conform to the rule of Industry standard Technical specification for cold drawing of low carbon steel wire JGJ 19.
Z248.5/248.6/348.5/Z348.6/Z442.5/Z442.6/Z558.5/Z558.6 Grids and reinforcing meshes Reinforcing meshes is manufactured compliance with Swiss Standard SIA 16211 S550. It is different sides wire in the whole sheet as K188/K335 in longitudinal direction. Itâ??s used widely on construction footing foundation,flooring slabs,foundation beams,bridge and piers and tunnel of coal,mine,subway,and trian reinforced and support. Heyou wire mesh is a professional manufacturer for reinforcing meshes which can comply to Chinese standard ,Australian/New Zealand standard,Germany Standard, Normes Francaises,Swiss Standard, Osterreichische Norm etc. Our factory was approvaled by ISO.All the reinforcing meshes are follow to international standard.We have enough exporting experiences.Our salesman are more than 10years working experience in this fields. Our workers which has strong and skillfull are expert, they produce the reinforcing meshes better than tyro. They made reinforcing meshes has firmly welding spot,accurate wire diameter,mesh space and panel size,clearly ribbed,non rusted. The specification of reinforcing meshes conformance with Swiss Standard SIA 16211 S550 mesh type Pitch of wires(mm) diameter of wire(mm) Per meter area sqm/m Dimension of Mesh Area of Mesh(sqmm) Mass (kg/sqm) Weight of Mesh(kg) pL pC dL dC long cross L(mm) B(mm) K188 6 6 150 150 188 188 5000 2000 10 3.091 30.192 K335 8 8 150 150 335 335 5000 2000 10 5.372 53.72 Z248.5 6/4.5 7 150 150 248 257 5000 2000 10 3.422 34.22 Z248.6 6/4.5 7 150 150 248 257 6000 2000 12 3.472 41.668 Z348.5 7/5.5 8 150 150 348 335 5000 2000 10 4.628 46.28 Z348.6 7/5.5 8 150 150 348 335 6000 2000 12 4.694 56.326 Z442.5 8.0/6.0 9 150 150 442 424 5000 2000 10 5.857 58.57 Z442.6 8.0/6.0 9 150 150 442 424 6000 2000 12 5.94 71.282 Z558.5 8.5/7.5 10 150 150 558 524 5000 2000 10 7.315 73.15 Z558.6 8.5/7.5 10 150 150 558 524 6000 2000 12 7.418 89.014
K188/K335 reinforcement wire mesh Anping Heyou Wire Mesh Products Co.Ltd can supply reinforcement wire mesh conformance with Swiss Standard SIA 16211 S550. Its has widely useage for foudations beams,slabs,walls,columns,foundation slabs,footings,tunnel,coal and mine,subway tunnel etc. The mesh spacing is 150mm,and normal sheet size is 2m*5m. The skatch of K188/K335 reinforcement wire mesh NL= Number of longitudinal bars PL= pitch of longitudinal bars dL= diameter of longitudinal bars NC=Number of transverse bars L= length of longitudinal bar B=Length of transverse bar u1=Overhang of longitudinal bars u2=Overhang of longitudinal bars The specification of reinforcement wire mesh conformance with Swiss Standard SIA 16211 S550 mesh type Pitch of wires(mm) diameter of wire(mm) Per meter area sqm/m Dimension of Mesh Area of Mesh(sqmm) Mass (kg/sqm) Weight of Mesh(kg) pL pC dL dC long cross L(mm) B(mm) K188 6 6 150 150 188 188 5000 2000 10 3.091 30.192 K335 8 8 150 150 335 335 5000 2000 10 5.372 53.72 Z248.5 6/4.5 7 150 150 248 257 5000 2000 10 3.422 34.22 Z248.6 6/4.5 7 150 150 248 257 6000 2000 12 3.472 41.668 Z348.5 7/5.5 8 150 150 348 335 5000 2000 10 4.628 46.28 Z348.6 7/5.5 8 150 150 348 335 6000 2000 12 4.694 56.326 Z442.5 8.0/6.0 9 150 150 442 424 5000 2000 10 5.857 58.57 Z442.6 8.0/6.0 9 150 150 442 424 6000 2000 12 5.94 71.282 Z558.5 8.5/7.5 10 150 150 558 524 5000 2000 10 7.315 73.15 Z558.6 8.5/7.5 10 150 150 558 524 6000 2000 12 7.418 89.014 The details of the reinforcement wire mesh as below: Apparent three face indentation om the surface The weld spot firmly and strong Homogeneous mesh space Flat mesh surface The inspection of the reinforcement wire mesh The wire diameter inspected by micrometer The mesh space messured by bemier caliper The width messured by flexible rule The length messured by flexible rule The Tensile strength and yield stress inspected by tensile machine weld shear resistance test The packing and shipment The bundle of sheet size 2m x5m Shipment for loading container Application site of reinforcement wire mesh Reinforcement wire mesh used on bridge and pier Reinforcement wire mesh used on construction footing foudation Reinforcement wire mesh used on flooring slabs Reinforcement wire mesh used on foudation beams
SE92/SE82/SE72/SE62 concrete reinforcing mesh for structural using Heyou factory can produce concrete reinforcing mesh which is the specification of New Zealand standard AS-NZS 4761-2001. Details of concrete reinforcing mesh: Material:250N,500N,500L,300E,500E Mesh Pitch:200mm Wire:ribbed steel wire & plain steel wire Overhang length of two sides:100mm Wire diameter:6mm,7mm,8mm,9mm Size:2.4m*6m or 2.2m*5.8m Packing:1ton more or less per bundle HS code:73142000 Production Standard: AS-NZS 4671-2001 More feature of concrete reinforcing mesh as below: Signel-bar meshes Twin-bar meshes Plain concrete reinforcing mesh Ribbed concrete reinforcing mesh The ribbed is visible and deep notch. high quality steel bar as raw materials Resposibility worker for drawing,straightened and cut Electric resistance welding,the solder joint firmly and beautiful appearance Full auotamatic machine opreation,the panel size high accuracy, Neatly packing Big place and enough warehouse for stocks The specification of concrete reinforcing mesh as below concrete reinforcing mesh specification Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6x2.4m sheets Cross-sectional area/m width No. x dia., mm Pitch,@mm No. x dia., mm Pitch,@mm Unit area,kg/sqm Sheet,kg Longâ??l bars,sqmm/m Cross bars,sqmm/m Structural and skatch SE92 13 X9.0 200 30 X9.0 200 5.0 75 318 318 SE82 13 X8.0 200 30 X8.0 200 3.9 59 251 251 SE72 13 X7.0 200 30 X7.0 200 3.0 45 192 192 SE62 13 X6.0 200 30 X6.0 200 2.2 33 141 141 Non-structural SL51.5 17 X5.3 150 40 X5.3 150 2.2 32 147 147 SL41.5 17 X4.0 150 40 X4.0 150 1.3 19 84 84 Are you a Manufacturer? Heyou wire mesh factory as a professional factory for reinforcement mesh,which has 10 workshops,more than 200 workers,advanced production line,perfect production process, Strict production regulations. We own ourselves laboratory for inspected chemical composition and mechnical property of raw material,drawn wire diameter measuring,cutting wire length measurement ,and full pieces of concrete reinforcing mesh which contained pitch of wire to wire,shearing resistance,tensile strength,yeild strength,elongation,bend test,weight tolerance,size tolerance,ribbed height,pitch of transverse wire ribbed,surface quality and etc. We are strictly to do everything in order to guarantee our concrete reinforcing mesh quality. Therefore,Heyou Wire Mesh has a high reputation in our field as real manufacturer.
Concrete reinforcement mesh is classified ribbed concrete reinforcement mesh and plain steel wire concrete reinforcement mesh. The wire of ribbed concrete reinforcement mesh is 3 faces indentation.Please see figuer Concrete reinforcement mesh is always used on residential slabs and footing-construction and BCA complying with AS 2870,which is always paced in all reinforced conrete members to stop the concrete cracking. And F62/F72/F82/F92/F1018 concrete reinforcement mesh is old specification,was replaced by SL62/SL72/SL82/SL92/RL1018.For example:previously called F62(now SL62) is wire diameter 6mm bars welded together in a 200mm square grid.the panel size is 2.4m X6m. The Tensile strength is 300Mpa. The concrete reinforcement mesh specification as below: Reinforcing Mesh Code wire diameter aperture edge open width length weight per sheet(kgs) F62 5mm 200*200mm 200mm 2.4m 6m 20.92 F72 6mm 200*200mm 200mm 2.4m 6m 30.12 F82 7mm 200*200mm 200mm 2.4m 6m 41 F92 8mm 200*200mm 200mm 2.4m 6m 53.55
Mesh: 1-300 mesh Common Mesh Size: 60*0.12mm, 60*0.13mm, 60*0.15mm Sample: free and available all the year round Wire Diameter: 0.005, 0.375, 0.5mm Application: can be used for water
Filter Rating: 90% Length: 30m Width: 0.02-5m Features: Corrosion resistance. Anti-acid and alkali. Anti-high temperture. Good filter performance. Long using life
Smoker can be divided into 30 type, 50 type, 100 type, 150 type, 200 type, 250 type, 500 type, 750 type and other models according to the output, which can be customized according to user needs. The smoker uses fruit wood, brown sugar, and white sugar as raw materials. After smoking, the smoke will smoke and color the product. After the product is smoked, the color is bright, the color is good, the product has good flexibility and good taste. The smoke generating device can be divided into built-in smoke generating device and external smoke generating device. The external smoke generating device does not occupy the internal space of the furnace body, and the amount of smoke is controllable, and the use is safe and reliable.
Description: Stainless Steel Conduit Fittings/45d Angle Structure: Connector body with hexagonal wrench surface, thread ISO metric in accordance with EN60423 or thread NPT in accordance with ANS/ASME B1.20.1-1983, Comply with stands AS/NZS 2053. 8, hexagonal pressure nut, sealing ring and ferrule. Material: Connector body - Galvanized die casting, zinc plated steel& malleable iron, nickel plated brass, stainless steel. Hexagon pressure nut - Galvanized die casting zinc plated steel& malleable iron, nickel plated brass, stainless steel. Sealing ring - Nylon 66 Ferrule - Galvanized steel or stainless Steel. Features: Simple, one piece installation provides a quick and reliable liquid-tight seal IP rating from IP40 to IP66/67/68 in combination with the corresponding flexible conduits High mechanical strength Highly liquid-tight and dustproof Vibration and tension proof Inherently low fire hazard Covering of the conduit ends Available in straight, 45o and 90o bodies Available in ISO Metric and NPT, PF, PG, BSP etc. threads Applications: General industrial and commercial electrical wiring protection Machining centers and robotics any narrow space in static applications General wiring for OEM applications Low fire hazard applications Under flooring wiring in office buildings Machine tools Installations where liquid-tight is a requirement Outdoor installation Special Applications: According to customer's samples and specifications, we can manufacture special fittings for suit any type of flexible conduit applications.
Structure: Connector body with hexagonal wrench surface, thread ISO metric in accordance with EN60423 or thread NPT in accordance with ANS/ASME B1.20.1-1983, Comply with stands AS/NZS 2053. 8, hexagonal pressure nut, sealing ring and ferrule. Material: Connector body - Galvanized die casting, zinc plated steel& malleable iron, nickel plated brass, stainless steel. Hexagon pressure nut - Galvanized die casting zinc plated steel& malleable iron, nickel plated brass, stainless steel. Sealing ring - Nylon 66 Ferrule - Galvanized steel or stainless Steel Features: Simple, one piece installation provides a quick and reliable liquid-tight seal IP rating from IP40 to IP66/67/68 in combination with the corresponding flexible conduits High mechanical strength Highly liquid-tight and dustproof Vibration and tension proof Inherently low fire hazard Covering of the conduit ends Available in straight, 45o and 90o bodies Available in ISO Metric and NPT, PF, PG, BSP etc. threads Applications: General industrial and commercial electrical wiring protection Machining centers and robotics any narrow space in static applications General wiring for OEM applications Low fire hazard applications Under flooring wiring in office buildings Machine tools Installations where liquid-tight is a requirement Outdoor installation Special Applications: According to customer's samples and specifications, we can manufacture special fittings for suit any type of flexible conduit applications.
Wire Mesh Container 1.They are a type of popular industrial containers, they have the functions of pallet and cage. 2. They are widely used for bulk materials handling, transportation and storage, especially for automotive parts, accessories and spare parts, hardware,machinery, electronics etc. 3.Be made of dot welded line steel 6.0 with the bottom part of U shape steel weld support to reach the enforcement of the structure. 4.Stack up to three cages high easily. 5.Half drop front gate, allows easy access into cage even when stacked. 6.Standard size, or customized sizes available. 7.Galvanised for longlife. 8.each shelves holds up to 500-1000kg. Product Name Wire mesh container Size L1200*W1000*H840mm(customized) Wire mesh 100*50;50*50mm Thickness 4.8-6.0mm Load Capacity 500/1000kg per level Stacker 3-4 layer Surface finish Galvanised Packing Packed by plastic belt and plastic film
Stillage 1.They are a type of popular industrial containers, they have the functions of pallet and cage. 2. They are widely used for bulk materials handling, transportation and storage, especially for automotive parts, accessories and spare parts, hardware,machinery, electronics etc. 3.Be made of dot welded line steel 6.0 with the bottom part of U shape steel weld support to reach the enforcement of the structure. 4.Stack up to three cages high easily. 5.Half drop front gate, allows easy access into cage even when stacked. 6.Standard size, or customized sizes available. 7.Galvanised for longlife. 8.each shelves holds up to 500-1000kg. Product Name Stillage Size L1200*W1000*H840mm(customized) Wire mesh 100*50;50*50mm Thickness 4.8-6.0mm Load Capacity 500/1000kg per level Stacker 3-4 layer Surface finish Power coated Packing Packed by plastic belt and plastic film