Welding torch
MMA welding holder
Material:tp304, tp310, tp316, tp317, tp321, tp347, 2205, 904l etc.. Standard:astm, asme, gost, jis, din, en ..... Finish condition: pickled, annealed, polished Process method: cold drawn, automatic, nitrogen protection Application: construction, upholstery instrument. Packing: in bundles or seaworthy wooden cases. We provide only high quality products at the best price. As required
Main technical paramerersú¦ model machine dimensionú¿lengthí-widthí-heightú¬m m 3 machine weightú¿KGú¬ weaving width (m) KBZJ-SA-44 2500í-2100í-1350 1200 1.0 KBZJ-SA-52 2500í-2300í-1350 1280 1.2 KBZJ-SA-56 2500í-2400í-1350 1350 1.3 KBZJ-SA-63 2500í-2600í-1580 1500 1.5 KBZJ-SA-75 2500í-2900í-1580 1800 1.8 KBZJ-SA-212 2500í-3400í-1650 2000 2.2 KBZJ-A-44 2260í-2700í-1350 1550 1.0 KBZJ-A-52 2260í-3000í-1350 1600 1.2 note:weaving width of each model of weaving machine is adjustable within limits
Headstand wire drawing machine Wire mesh with good quality and low price, practical , stable and firm, low noise
This unit is made up of payoff stand, fine wire wet drawing machine, tension device, 400 spool coiler, mainly used to draw shaped brass wires.
Supported on frequency conversion technique, electric control system of our deadbeat wire drawing machine realizes advanced control of self-adapting and operation of high performance and high credibility by the field bus or digital to analog conversion technology. Its features include high speed, high efficiency, low cost, low power consumption, easy operation, and strong process versatility, which may assemble in optional by customer requirement with high automatic level.The product is adequate for steel cord yarn, wheel rim steel wire, rope manufacturing steel wire, gas-protection welding wire, stainless steel wire, steel wire for umbrella ribs, and pc 000000
It is a new applied type building open angle-protecting mesh., it is made up of joint steel bar and pull-joint mesh, the pull-joint mesh form the 90ípangle through the joint steel bar, there are round hole on the pull-joint mesh which is parallel with the steel bar. The new applied type can protect and enforce the open angle, avoid the open angle falling off, distortion, crazing.The cost is low, the structure is simple, and can be operate shortcut, the construction is convince. It has the widely practicability. The angle-protecting mesh is shaped through extend of the hot galvanized plate and stainless steel plate. The two extended wings of the mesh can combine firmly with the compo, it used in the the building and form the smooth, straight, simple angle; and protect the angle from disrupting, hitting, and destroyed. The stock length is 2.4m--3m, or produce according to the customers' request 000000
Magnetic welding holder Magnetic holder is like an extra pair of hands! powerful, semi-permanent ferrite magnet holds iron and steel parts at angles of 45, 90 and 135. Increased productivity for welding, soldering, assembly, marking, installation and support. Specification: 25lb, 50lb, 75lbs Slot packing
Arrow magnetic welding holder Magnetic holder is like an extra pair of hands! powerful, semi-permanent ferrite magnet holds iron and steel parts at angles of 45, 90 and 135. Increased productivity for welding, soldering, assembly, marking, installation and support. Specification: 75lbs If you have any questions, please contact me without delay. Caoton size:35x34x19cm Qty:24pcs/carton Gw/nw:28/27kg : 75lbs Caoton size:35x34x19cm Qty:24pcs/carton Gw/nw:28/27kg
Magnetic welding holder Magnetic holder is like an extra pair of hands! powerful, semi-permanent ferrite magnet holds iron and steel parts at angles of 45íp, 90íp and 135íp. Increased productivity for welding, soldering, assembly, marking, installation and support. Material: iron and magnet Specification: 50lbs Package Carton size: 28x16x20cm Qty: 8pcs/ctn G.W/n.W.: 15/13kg Specification: 50lbs Package Carton size: 44x27x14cm Qty: 36pcs/ctn
It is generally applied in manufacturing a great variety of multi-strand of barbed wires, which are widely used in national defense, railway, superhighway, agriculture and farming, etc NO. Item Unit Fundamental Parameter 1. Motor Model Y100L2-4 3kw 2. Main Drive Shaft Speed r/min 402 3. Barbed Wire Takingup Rate r/min 470 4. Wire Drawing Rate r/min 134 5. Rotating Speed of Takingup Disc r/min 30-255 6. Main Engine Section m (Length,Width,Height) 1.9*1.3*0.98 7. Takingup Twisting Section m (Length,Width,Height) 1.8*0.75*0.98 packed and shipped
Be able to work as TIG,MMA and CUT,New type and high efficiency,economical and practical
1.High quality, excelent performance,stable arc,less spatters 2.Automatic voltage compensation. 3.IGBT inverter high running frequency,high efficiency,low noise. 4.Arc force currnet adjusted in succession. 5.With the protection function in over voltage and over heat. 38kgs 42kgs 46kgs
For 20 years, we has been specialising in the design and manufacture of cold welding equipment and dies for wire and cable industry. The cold pressure welding machine is a fast, easy and cost-effective method of bonding non-ferrous wire and strip to provide a bond stronger than the parent material, without heat, fillers or fluxes, which can join copper wires from 0.07mm to 8.00mm, aluminum wires from 0.07mm to 14.00mm. Certainly the unit pirce of our cold pressure welder are better than pwm similar products. Hope to establish business relationship with you in this field, please visit our website for detail specification. Wooden case and carton
Welding wire Box and cartons and pallets
High frequency welding machine Detailed product description Main uses: plastic packaging (including heat sealing and trimming for upper & lower blister, heat saling and trimming for blister and cardboard), automobile ornaments, sunshade, trademarks, garments, shoe and capembossing, leather embossing; gas mattress, boat, life jacket, toy; stationery, raincoat, plastic cover; kinds of medical infusion bag, blood bag, portable soft bag; it can be used for pressing kinds of concave-convex figures and characters. Equipped with some simple device, it also can be used for bronzing. Wooden case packing
Function characteristics: This machine adopts synchronous control technique, welding time and cent-control welding are composed of plc program system with pressing firmly once only and welding repeatedly.The input front-panel has two forms: touch screen and keyboard, it makes this machine more intelligent and reasonable. The weft supplies are automatic. The greatest advantage is that you can adjust the distance of cross at random on one piece of mesh sheet. This machine equipped with new and efficient transformer, whose gear shift has 8-class, so it enlarges welding range .It is easy to learn and use, and welding output is more several times than manual work. Uses of the product: Fence mesh ( fence of highway and railway [we can supply technique about pvc coated fence ] )íóenclosure mesh and building roof mesh.) The main parameterú¦ ¦++=d++¦ Wire diameter íT3í¬íT5ú¿mmú¬ ¦++=+++¦ Welding aperture 50*50-300*300ú¿mmú¬ ¦++=+·+f Width of mesh 2000ú¿mmú¬ +¡n¯O²ß+ú¿¦+¦pú¬ The number of warp 40 ¦++=d·¦F Welding speed 30(times/minute) ¦e¦¿¦t±¦ Rated voltage 380v ¦e¦¿¦ªGO Rated electrical power 400kva -G=f¦¯¦t(p+) Overall dimension 6*3.2*1.8ú¿mú¬ +·µ˜÷°ß+ Machine weight -G=f¦¯¦t(p+) Overall dimension 6*3.2*1.8ú¿mú¬ +·µ˜÷°ß+ Machine weight
Function Characteristics: This kind of machine is used in single spot or many spots welding. Upper electrode and welding pressure could adjust at random, in order to make welding spots firmly, the electrode adopts efficient refrigeration system, so it makes sure that the machine works continuously; the switch of main return is composed of imported silicon, it has fast reaction and accurate parameter, so it makes sure that output current is stable. Use Of The Product: This machine welds mainly special mesh, such as mechanism, construction, the metal finished product, enclosure mesh, fence mesh, barbecue mesh, craft mesh, small sheet, stainless steel mesh, and mesh edge.
Function Characteristics: This kind of machine has four specifications, and the diameter is from 1.5 to 10mm The length could adjust according to customersí» demand. It could straighten stainless steel wire, aluminum wire, cold-drawing wire, and steel wire with plastics. This machine has many advantages, such as neat cutting mouth, less error and good functions.
