APC;Smart-UPS, 670 Watts / 750 VA, Input;230V / Output;230V, Interface Port DB-9 RS-232, USB, SmartSlot Includes: CD with software, Smart UPS signalling RS-232 cable, USB cable, User Manual output, Output Power Capacity ú¦600 Watts / 1000 VAMax Configurable Power ú¦600 Watts / 1000 VA Nominal Output Voltage ú¦230V Output Voltage Distortion ú¦Less than 5% at full load Output Frequency (sync to mains)47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal Crest Factor up to 5 : 1 Waveform Type Stepped approximation to a sinewaveOutput Connections(4) IEC 320 C13 (2) IEC Jumpers Input : Nominal Input Voltage: 230V Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing) Input Connections :IEC-320 C14 Input voltage range for main operations 186 - 284V Input voltage adjustable range for mains operation 175 - 297V Maximum height:216.00 mm maximum width :170.00 mm maximum depth :439.00 mm net weight :18.86kg shipping weight :20.91 kg shipping height :381.00 mm shipping width :330.00 mm shipping depth :584.00 mm color :black units per pallet :24.00
Apcáback-ups cs, 300 watts / 500 va, inputá230v / outputá230v, interface port db-9 rs-232, usb includes: cd with software, documentation cd, qty 1 - detachable 1.2 m iec power cord, qty 1 - detachable 1.8 m iec power cord, telephone cable, usb cable, warranty card "output output power capacity:300 watts / 500 vamax configurable power :300 watts / 500 va nominal output voltage :230v output connections :(1) iec 320 c13 (surge protection) (3) iec 320 c13 (battery backup) (2) iec jumpers (surge protection) input nominal input voltage:230v input frequency :50/60 hz +/- 3 hz (auto sensing) input connections :iec-320-c14 inlet Cord length :1.83 meters input voltage range for main operations 196 - 280v input voltage adjustable range for mains operation 160 - 300v " Maximum height:165.00 mm maximum width :91.00 mm maximum depth :284.00 mm net weight :6.32kg shipping weight :7.05 kg shipping height :178.00 mm shipping width :241.00 mm shipping depth :368.00 mm color :beige scc codes 107 31304 01635 6 units per pallet :96.00
1.Super wide input voltage range:90V-280V 2.Four-steps AVR 3.Powerful charging current:500W up to 15A,1KW-4KW,up to 25A 4.Protection against short-circuit 5.Special overload protection,when it is overload,it will lock the unit automatically, when it restores,it will start the unit automatically again 6.when the mains come,it will start the unit automatically 7.Function that it will change its frequency instantly it is able to drive inductive loads,such as air-conditioner,refrigerator, motor,and so on 8.With RS232,it can realize software control function. 372*122*195CM 7.8KG.
Features: Double conversion on line technology Modularize Double cpu control Static bypass Manual maintenance bypass Wide input voltage range Lcd with control panel Advanced battery management Parallel redundant, parallelabel up to 6 modules Self diagnosis Full protection against over-discharge, overcharge, over load, Standard export packing, your desigen come first.
Features: Wide input voltage window Boost and buck avr Cold start function Intelligent cpu control Smd technology to save space Protection for short circuit and overload Both audible and indication lamp alarm functions Protection for overcharge, deep discharge and automated charge current regulation Wide input frequency range and compatible with small generators Intelligent battery management Dry contact communication with monitoring software Optional rs232 and usb Standard export packing, your desigen comes first.
01. Nominal power Capacity: Volts-Amps/Watts(VA/W): 1000VA/700W 2000VA/1400W 3000VA/2100W . 02. Input Nominal Voltage: 110/115/120Vac or 220/230/240Vac Voltage Range:60-138VAC or 115-300VAC Frequency Range:50Hz: 46-54Hz(Default), 60Hz:56-460Hz Power Factor: í¦0.95 í¦0.97 . 03. Output Voltage: 110/115/120Vac or 220/230/240Vac Frequency Synchronized: 46-54Hz or 50Hzí+ 0.2Hz(Line mode)50Hzí+ 0.2Hz(Battery mode) Wave-form: Sine Wave Distortion: í_3% (Full linear load) í_4% (Full linear load) Overload Capability: 108%-150% for 30sec: í¦150% for 200ms Crest Ratio 3: 01 . 04. Battery Type: Sealed Lead-Acid, Maintenance free Capacity: 12V/7AH*3pcs 12V/7AH*8pcs Back-up time: (Full /half load) 5mins/14mins 9mins/21mins 5mins/17.5mins Recharge time: 5hours to 90% of full capacity after full load discharge . 05. Transfer time: 0ms; 2.5ms typical from inverter to bypass and vice versa . 06. LED indicators Status Battery level, Battery mode, Line mode, Inverter, Bypass, Overload, fault. 07. Audible Alarm: Battery mode: Alarm beeps every four seconds, every second if battery low Overload: Alarm beeps two for every second Fault: Alarm beeps continuously. 08. Acoustic Noise: At 1 meter distance 45dBA 50dBA. 09. Communications DB-9 Connector: RS232 Serial interface; Power monitoring and unattended systems shutdown via kavass2002 Intelligent Slot SNMP: Power management from SNMP manager . 10. Network Surge Protection: RJ45 I/O port available for 10base -T network or Fax/Modem . 11. Environment Operating Temperature: 0-40 Operating Humidity: 20-95% non-condensing . 12. Applications Servers Data-center, Critical network, Sensitive electronic equipment, Telecom. 1KVA500*240*335mm 2KVA3KVA 590*335*480mm Cartons, foam and wooden.
1. Nominal Power Capacity: Volt-Amps/Watts(VA/W) 6000VA/4200W 10000VA/7000W . 2. Input Nominal Voltage (Single): 220Vac Voltage Range: 176-300Vac Frequency Range: 46.5-55Hz Power Factor: í¦0.95 í¦0.97. 3. Output Voltage Range: 220Ví+ 2% Frequency Synchronized: 46.5-55Hz or 50Hzí+ 0.2Hz(Line mode)50Hz0.2Hz(Battery mode) Wave-form: Sinewave Distortion: í_3%(full linear load) í_4%(full linear load) Overload Capability: 108%-150% inverter mode for 10 minutes í¦130% by pass mode for 1 minute. 4. Crest Ratio: 3: 01 5. Battery Type: Sealecd Lead -Acid, Maintenance Free Capacity: 12V/7AH*20PCS 12V/7AH*40PCS 6. Transfer time: 0ms; 2.5ms typical from inverter to bypass and vice versa 7. Battery mode: Alarm beeps every four seconds, every second if battery low Overload: Alarm beeps two for every second Fault: Alarm beeps continuously 8. Acoustic Noise: At 1 meter distance 45dBA 50dBA 9. Communications: DB-9 Connector RS232 Serial Interface; Power monitoring and unattended systems shutdown via software 10. Applications: Servers Data-Center, Critical network, Sensitive electronics equipment, Telecom. 705*435*950mm Foams,cartons and Palet.
Sealed and value-regulated, maintenance free, using longevity Size:12v7ah, weight:2.Kg, dimensions;151*65*94*99
1. Nominal Power Capacity: Volt-Amps/Watts(VA/W) 6000VA/4200W 10000VA/7000W 2. Input Nominal Voltage (Single): 220Vac Voltage Range: 176-300Vac Frequency Range: 46.5-55Hz Power Factor: í¦0.95 í¦0.97 3. Output Voltage Range: 220Ví+ 2% Frequency Synchronized: 46.5-55Hz or 50Hzí+ 0.2Hz(Line mode)50Hz0.2Hz(Battery mode) Wave-form: Sinewave Distortion: í_3%(full linear load) í_4%(full linear load) Overload Capability: 108%-150% inverter mode for 10 minutes í¦130% by pass mode for 1 minute 4. Crest Ratio: 3: 01 5. Battery Type: Sealecd Lead -Acid, Maintenance Free Capacity: 12V/7AH*20PCS 12V/7AH*40PCS 6. Transfer time: 0ms; 2.5ms typical from inverter to bypass and vice versa 7. Battery mode: Alarm beeps every four seconds, every second if battery low Overload: Alarm beeps two for every second Fault: Alarm beeps continuously 8. Acoustic Noise: At 1 meter distance 45dBA 50dBA 9. Communications: DB-9 Connector RS232 Serial Interface; Power monitoring and unattended systems shutdown via software 10. Applications: Servers Data-Center, Critical network, Sensitive electronics equipment, Telecom
Uninterruptible power supply
Microprocessor Control Guarantees high Reliability Comprehensive Self-Protection Design Audible Alarm Mute Cold Start Function Auto Self-Testing System While Turning on UPS Wide Input Voltage Range Capacity: 6000VA/4200W 10000VA/7000W Input voltage: 220V8230V/240V Output voltage: 220V8230V/240V Power Factor: Input >0. 97 Output 0.7/0.8 Waveform: Pure sine wave Inter face: Smart RS-232, USB Port option, Dry-Contact, SNMP, EPO.
Shenzhen ZLPOWER Electronics Co., Ltd is a leading manufacturer and exporter focus on UPS (uninterruptible power supply) and Inverter, battery: 1. High frequency online UPS: 1kva-20kva 2. Rack mount UPS: 1kva-10kva 3. Line interactive UPS & Offline UPS 3. Array UPS 4. Home UPS/ Power Inverter: 500va-2kva 5. Lead-acid battery/ UPS battery: 1.2ah-200ah 6. Battery Cabinet 192*460*348mm
UPS Built-in isolated transformer. Interference free, give a clean power with high overload performance. True Online UPS, Double Conversion IGBT Technology The Pure Sine Wave online UPS. With the latest double conversion IGBT technology, this UPS can offer the best clean power source for all type of applications. LCD display Human-Machine Interface All important parameters was showed on the screen such as UPS status, battery condition, input and output value, frequency value, loading percentage, etc. 20 KHz PWM Technology 20 KHz PWM circuit, Noiseí_60DB. Wide Input Range 25% tolerance of input voltage is permitted, under full load condition. Protect batteries from frequent switching to backup mode. STS (Static Transfer Switch), Mechanical Failure Free STS (Static Transfer Switch) is provided for output with zero interrupt in the event of outage. There should be less than 2 ms for switching to bypass in the event of UPS failure. Overload Protection Overloaded up to 125%, automatically switch to bypass after 60 seconds. Recovery after load corrected Short Circuit Protection Built-in short circuit protection to prevent any unexpected damage. Hot Standby Function For genuinely redundant power protection, UPS can be installed in hot-standby mode, ready to take over the load automatically in the event of a critical component failure. High-Temperature Protection Built-in Temperature control to protect electronic component from high temperature. Cold Start Function Powerful startup circuit, cold start can be performed even in the battery mode. Charging Current Adjustable Charging current can be adjusted from 1A to 10A. Advance Alarming System Built-in advance alarming system, giving reminders to the users of the UPS status. Computer Interface RS232 communication +UPS monitor software
MTT series on-line intelligent digital UPS congregates the essence of Baykee technology and entirely broke the bottleneck technology in traditional simulation circuit era. It adopts the digital control technology, of which the core is high-speed MCU and CPLD and takes the sixth generation low-exhaust and big-power IGBT and static switch as power components. Guided by these most advanced technologies in the world, it is really the first class product MTT series UPS also adopt 4 layer PCB and larger power. The capacity can be from 10~400KVA, widely applied in the telecommunication, bank, stock exchange center, transportation, electricity, industry etc. B) Six technologies crystallization which breaks the profession power limitation Full digital control system Advanced digital electric circuit system and super stability Size(W*D*H)mm :480*890*1200 Weight(kg): 500kg
MTT series on-line intelligent digital UPS congregates the essence of Baykee technology and entirely broke the bottleneck technology in traditional simulation circuit era. It adopts the digital control technology, of which the core is high-speed MCU and CPLD and takes the sixth generation low-exhaust and big-power IGBT and static switch as power components. Guided by these most advanced technologies in the world, it is really the first class product MTT series UPS also adopt 4 layer PCB and larger power. The capacity can be from 10~400KVA, widely applied in the telecommunication, bank, stock exchange center, transportation, electricity, industry etc. B) Six technologies crystallization which breaks the profession power limitation Full digital control system Advanced digital electric circuit system and super stability í(Intelligent battery management MTT series UPS brings in advanced intelligent battery management system. This system will automatically adjust battery charge parameters according the userí»s battery configuration, and can achieve batteryí»s float and boost conversion, temperature compensation and battery charge& discharge management according to the power supply environment. Provides intelligent detection for whole process. The system microprocessor will continuously detect on line all powerí»s supply working status, breaker status, and all circuits working status. Any failure occurs, the detecting system will immediately alarm to the runner, while synchronously starting-up UPS protection function. Provides intelligent communication for long-distance monitor 1. RS232 and RS485 interface realizes multi-communication and long distance monitor. 2. The choice SNMP card 100% carries out long distance supervision and network management; 3. The choice dry contact connection, adopting non source contact, efficiently carries out the supervision and control of the UPS status. High precision SMD technology MTT series UPS replaces traditionally insert electric circuit processing with high precession SMD technology. This innovation not only save the space but also drastically eliminate the distortion of insert components in traditional UPS circuit. Whatí»s more, it ensures the integrate circuit a safe operation and enhances its reliability & operation precision. MTT series UPS, widely using SMD technology, is heat-resistant, highly accurate and also has an excellent filter, which greatly improves the whole performance of the UPS. It is more durable and its lifetime is prolonged by 80%. Sixth generation IGBT, the high-speed static switch and higher reliability High-speed switch feature of IGBT; High voltage and large current; adopting voltage drives, only needs little control power. With much lower saturation voltage, the inverter AB working efficiency much higher temperature lower, more reliable. Ultra-clear interface information processing technology makes communication between human and machine smooth. It provides humanized big screen LCD in both Chinese and English, intuitive view of intelligent icon status of the flow chat, tabular data, events records and menu operation in both Chinese and English. It provides clear intuitive view for the LED work state and work flow. Decisive environmental protected and economized technique According to the scientific life cycle evaluation, the MTT series adopts the touch screen whose anti-aging function is excellent and the Cabinet external appearance which is fluorine carbon craft processed, which is environment protected and durable, It adopts dismountable modularized design which is easy to protect and save the resource, and new type of vortex fan who has a excellent performance of radiation and energy conservation. It introduces NO-circumfluence control circuit which is excellently energy-saving and green commutate and athwart technology which can provide clear energy. Also it brings in advanced digital circuit and high pr¿ªcised SMD technology, which prolongs the UPSí»s lifetime by 80%. C) Other functions í( Superior load It is completely capable to load from 0-100% while no need to change to bypass, which make sure the output reliable. í( Perfect protection. It has output over/low load protection, Input surge protection, phase sequence protection; battery over charge/discharge protection; short circuit protection; over-temperature protection and so on, as well as alarming function. High dynamic performance. Adopting kinds of feedback control such as instantaneous control method and valid date, it achieves high dynamic adjustment and reduces the output THD. Phase-to-phase stabilizer Independent phase-to-phase control realizes the control of instant over-loading balance, so as to reach O/P 100% unbalance load. Optional input harmonic filter and 12 pulse rectifier effectively restrain the input THD; Raise UPS input power factor, reduce the input THD current. Optional battery detecting module able to test the single parameters, and display on the LCD. If battery failure it will alarm to runner. Size(W*D*H)mm 1380*950*1800 Weight(kg) 1520
capacity: 2Kva-40Kva Surge surpression ,fiter dangerous voltage and protect the electric equipment. remote turn-off and self diagnosis. advanced SPWM technology for inverter output structural optimization comprehensive function and protection parallel redundant up to 8 units design to be easy servicing user friendly human-machine interface network monitor management Specification: Model:JY20L,JY30L,JY50L,JY60L,JY100L,JY100L31,JY150L31,JY200L31,JY300L31 Max/Rated Capacity:2KVA / 1.6KW;3KVA / 2.4KW;5KVA / 4KW;6KVA / 4.8KW;10KVA / 8KW;10KVA / 8KW;15KVA / 12KW;20KVA / 16KW;30KVA / 24KW INPUT:110Vac / 220Vac for single phase; 200Vac / 380Vac for three phase "31" of model stand for three phase in ,one phase out. OUTPUT:110Vac / 220Vac pure sine wave Transfer Time: < 2ms Crest Ratio:> 3:1 Harmonic Distortion:< 3% ( Linear Full Load ) Efficiency:> 85% Overload:> 120% for 10 Minutes ; >150% for 30 Seconds Short Circuit:Electronic Circuit Self-Protection DC-Start/auto-restart :yes Noise:< 50dB (at 1 meter ) CommunicationPort:True RS 232 Interface or DB9 /optional SNMP card JY20S:MEAS:230í-624í-592(mm) Weight:60kgs
UPS
Off-line ups-prb-s series Model no. Prb-s500 prb-s500b prb-s650 prb-s1000 prb-s1200 Capacity 500va 500va 650va 1000va 1200va Watt 300w 300w 400w 600w 720w Input 170~255v 165~270v ac 145~270v ac Frequency 50hz Output 50-90hz 220v 50hz Avr w/o with avr function Transfer
Off-line ups-prb-v series Modle no. Prb-v500 prb-v1000 Capacity 500va/300w 1000va/600w Input 175~260v ac 50hz Output 220v ac ía10% 50hz Waveform square wave(battery mode) Transfer time < 10ms Recharging time 8hours to 90% Battery 1x12v 7ah 2x12v 7ah Temperature 0-40íµ Humidity
19" Rackmount Chassis based the design which bave six springs, and the front door with a lock. Hi-strength electrostatic powder painting makes peel and bubble-proof. 1.2mm SGCC housing material with exquisite techniques and secure structure. Wonderful design for conducing heat, which is suitable for cooling of DP machine's mother board. system control: there are one power, one rest switch and only keyboard switch. Colours: black, blue,white, grey,silvery white. Dimensions(D*W*H) 480mm X 427mm X 177mm FDD:3.5" Power: 250W ATX PFC PS/2 System cooling fans: Fan 12025 Expansion slots :PCI CD-ROM :5.25"(STD) HDD: 3.5" Front USB :Hold out M/B support :ff12"f-13" in max Measurement 610mmX520mmX260mm G.W:14KG, N.W:11.6KG
