Handheld screwdriver machine is made up of high-quality parts with advantages of low consumption, high efficiency and stability,it is suitable for automated assembly in the electronics industry such as cameras, mobile phones, hard disks, keyboards, printers, computers, DVDs, home appliances, toys, appliances, communication equipment, electronic processing and assembly,etc. Handheld screwdriver machine is made of three main parts: 1.Screw feeding system. 2. Screw sorting system. 3. Screw locking system. These three systems are controlled by the machine's program. http://www.dgbobet.com/dgweb-166281.html
Specification: R0.3~R100 Material: Element Six Single Crystal Diamond, South African Natural Diamond Tool bar size: 6-20 Tool holder material: tungsten steel Speed: 5000-100000r/min Feed: 1500-5000mm/min Cutting depth: 0.05-0.2mm Processing materials: aluminum alloy, copper, acrylic and other non-ferrous metals and non-metals Features: good finish, high cost performance
Specification: R0.3~R100 Material: Element Six Single Crystal Diamond, South African Natural Diamond Tool bar size: 320 Tool holder material: tungsten steel Speed: 5000-100000r/min Feed: 1500-5000mm/min Cutting depth: 0.05-0.2mm Processing materials: aluminum alloy, copper, acrylic and other non-ferrous metals and non-metals Features: good finish, highly cost-effective, long life
Specification: R0.3~R100 Material: Element Six Single Crystal Diamond, South African Natural Diamond Tool bar size: 620 Tool holder material: tungsten steel Speed: 5000-100000r/min Feed: 1500-5000mm/min Cutting depth: 0.05-0.2mm Processing materials: aluminum alloy, copper, acrylic and other non-ferrous metals and non-metals Features: good finish, highly cost effective.
Laryngoscope 1 set: 1 handle+3 Mac blades (#1 #2 #3 #4) 1 handle+3 Miller blades (#1 #0 #00ï¼? 1 set: 1 handle+ 3 disposable Mac blades
Specification: R0.3~R100. Materials: Element 6 single crystal diamond, South African natural diamond. Tool rod size: customized. Tool rod material: tungsten steel. Speed: 5,000-100000r /min. Feed: 1500-5000mm/min. Cutting depth: 0.05-0.2mm. Processing materials: aluminum alloy, copper, acrylic and other nonferrous metals and nonmetallic. Features: good effect, long life, highly cost effective.
Specification :0 to 90 degrees Materials: Element 6 single crystal diamond, South African natural diamond. Tool rod material: tungsten steel Speed: 5,000-100000r /min. Feed: 1500-5000mm/min. Cutting depth: 0.05-0.2mm. Processing materials: aluminum alloy, copper, acrylic and other non-ferrous metals and nonmetallic. Features: high finish, high cost performance, long life
Specification: end mill Material: Element Six Single Crystal Diamond, South African Natural Diamond Tool bar size: �¦3â??�¦20 Tool holder material: tungsten steel Per second: 5000-100000r/min Feed: 1500-5000mm/min Cutting depth: 0.05-0.2mm Processing materials: aluminum, copper, plastic, resin, etc. Features: good finish, high cost performance, long life
Specification: 0 to 90 degrees Materials: Element 6 single crystal diamond, South African natural diamond Tool rod size: 3 -20 Tool rod material: tungsten steel Speed: 5000-100000 r/min Feed: 1500 ~ 5000 mm/min Cutting depth: 0.05-0.2mm Processing materials: aluminum alloy, copper, acrylic and other nonferrous metals and nonmetallic Features: good finish, high cost performance, long life
Blade material: single crystal diamond, MCD and CVD Tool rod material: tungsten steel, white steel, stainless steel Speed: 800-10000 r/min Feed: 200-1000 - mm/min Cutting depth: 0.05-0.2mm Suitable for processing materials: aluminum alloy, copper alloy, plastic, resin, etc Features: good effect, long life, high cost performance Suitable for processing materials: resin, aluminum alloy, copper, plastic.
Tool specification: non-standard Materials: Element 6 single crystal diamond, South African natural diamond Cutter rod size: ISO standard Tool rod material: tungsten steel Speed: 800-10000 r/min Feed: 200-1000 - mm/min Cutting depth: 0.05-0.2mm Processing materials: aluminum, copper, plastic, resin, etc Features: highly polished, high cost performance Application area Watch industry, aluminum products industry, mobile phone digital industry, plexiglass and other industries.
PCD Wear Resistant Parts Polycrystalline Diamond is a professionally applied clear diamond thick layer which is extremely hard .Due To Extremely Low Friction And High Wear Resistant Make PCD The Ideal Material For Support And Reference Parts Submitted To Wear. PCD wear parts are used for workpiece support and reference, such as Dead Centre and Centre points, Support pads for lathe machines, Centring and positioning components, Measuring probes and points, Master gauges, others PCD wear parts Application of PCD wear resistant parts PCD Bearing, Bearing. Such As Front PlatePressure RotorLoading ShoeBacking Plate. Electronic Components. Such As Punch ToolRounded Shaped DieRectangular Shaped DieDiamond Chip Heater, Bonding Of IC Chips. Machine Tools. Such as Collet, Centerless Blad, Fixed Lathe Centres, Gauge Heads. and Support pads for lathes. Automible Industry (Camshaft, Crankshaft, spray nozzles), Measuring fixtures, Measuring probes and points, Etc.
1 This online EL detection, four camera shooting mode, also can add solar panel surface defection model 2 El cameras pixel2million 30thousand *4 VI cameras 20million pixel*4 3 The height of the table 950mm, the long side into the long side out. 4 Servo motor control and equipment with mechanical correction system Ensure that every power position is accurate, the deviation is less than 0.5mm. 5 Signal input start, solar panels into the detection unit, after the completion of the test, selection of personnel classification, solar panels out.
Equipment work characteristics: This solar panel EL test unit, using 24million pixel cameras Resolution 6000*4000 It is suitable for the detection of various specifications of solar panels �?the utility model has the characteristics of versatility and practicability. Workflow: press the start button box lid, add artificial solar panels and connect the DC power supply, and then press the button to close the lid, Scan the bar code or click on the camera for testing. It can test high current and low current test mode. Closed box no light interference, to ensure the shooting effect. Main technical parameters of equipment 1. Application type: silicon components, laminated before / after lamination, framing can be. 2. Applicable component range: long side (1580-2100) mm* short side (800-1000) mm 3. Test speed: power on test time 20s 4. Air pressure: 0.6-0.8mpa 5. Gas consumption: 3.5L/min 6. Tracheal interface: 8 7. Operating voltage: 220V/50HZ 8. Power: 1KW 9. Size: 2250mm*1980mm*980mm(L*W*H) 10. Operating temperature: 10~40 DEG C
PCD boring tools are used for machining various of tungsten carbide rollers. PCD tips for carbide roller notching. The PCD boring tools are made by PCD blanks (E6) brazing on the tungsten carbide body. Most common is full face pcd notching tools. Applications of PCD boring tools: PCD boring tools are used for machining various of tungsten carbide rollers. PCD tips for carbide roller notching. Advantages of PCD boring tools: * high abrasive resistance and thermal conductivity * good surface finish * Long service life. The service life is 20-30 times more than carbide boring tools.
PCD grooving tools are used for finishing processing ring grooves of piston. Specification More Superhard grooving tools are successfully used in many automobile and engineering industries for grooving aluminum and non-ferrous and ferrous metals. With high precision and multi functional capabilities, reducing grooving time, increasing productivity and reducing through-put time with lower tooling costs. Applications of PCD grooving tools: Grooving aluminum alloy pistons and non ferrous parts. The PCD external grooving tools are used to groove and cut various materials including copper, aluminum,copper alloy, aluminum alloy, tungsten carbide and nonmetal work pieces. Advantages of PCD grooving tools: * The special carbide substrate and high wear resistance of PCD material, effectively overcome easily cutting knife in the processing. * PCD grooving tools with high precision, good wear resistance. * The PCD ring grooving tools' precision can reach 3 -4 �¼m . * Piston is made of aluminum alloy containing more than 17% silicon , has strong wear resistance that needs more high wear resistant PCD tools to process. * The service Life of the welding PCD grooving tools is 10 -15 times that of carbide tools. * Ewag precision Manual grinding machine * Technical team with over 10 years experience
PCD Reamer From More Super Hard, you can get a PCD reamer with high accurate, reliable quality and economic to solve your problems in bores machining. Simple PCD reamers, customized multiblade stepped reamers and on to customer specific special tools are all available. Specification *For single through hole and blind hole processing, the reamer is standardized and highly efficient. The blade is polished, which can bring higher surface roughness Ra0.2 and service life. The cutting speed can reach 200-1000m/min, which can handle high speed, high feed and high precision machining with excellent performance. *For deep hole processing, the special water outlet structure design of the tool can effectively prevent the problem that aluminum chips are not easy to break and wrap around the tool body during aluminum profile processing. Guiding design of the tool body It can ensure that the tool has good dimensional accuracy and stability at high speed.
PCD sintering drill bits products are suitable for different grades of aluminum alloys and CFRP/GFRP materials. And can be used in abrasive materials in the automotive, aerospace and all composite material processing industries to meet the high quality requirements for drilling. Application of PCD drilling tools -Different kind of CFRP materials -GFRP materials -Very abrasive material -High quality holes Specification CFRP is notoriously difficult to machine without delamination, uncut fibers and fiber pullout. Compared with traditional coated tools, even at higher cutting parameters, not only the process is more reliable but also the blade life is longer Using advanced PCD sintering technology to achieve a high degree of process reliability and stability The outlet of the processed hole has almost no breaks and burrs, and the surface quality of the hole wall is good; For composite materials processing, minimize the risk of delamination PCD sintering drill bits cutter body are made of fine-grained carbide material, PCD cutting edge is sharper, while bringing higher machining quality and longer tool life.
The mono-crystal diamond tools can achieve excellent cutting edge by grinding . And the surface finish can reach 0.025 micron or higher. Mono-crystal diamond tools are often used for machining high - precision parts with mirror finish.After processing, generally do not need to grinding,polishing and other subsequent processes. Specification Advantages Of Mono Crystal Diamond Tools * High hardness and wear resistance * It will be not easily sticking the cutter * High efficiency and low cost * To obtain a higher surface finish
PCD inserts can be used for cutting other non-ferrous metals such as aluminum alloys and non-metals such as fiber-reinforced plastics (GFK and CFK), hard rubber, wood, fiberboard, melamine resin polymer materials and fiber-reinforced metals (MMC). Using cutting tools with diamond coating, you can get faster cutting speed and longer tool life, and the quality and accuracy of the surface of the processed material will be higher. Specification 95%-99% of the components of PCD (polycrystalline diamond) are carbon isotope C12, and its thermal conductivity is 50% better than natural diamond and 2 times faster than copper. Diamond is a hard material, using a special high temperature and high pressure process, a tight layer of polycrystalline diamond can be pasted on the cemented carbide substrate
