Use widely: the series of elegant inhabitation can be widely used in the commercial office building, high-class apartment houses, villas, and many other locations Flexible dressing, easy installation: with the pump, plate heat exchanger, water storage and flow switch inside, the appearance of the unit is more portable and beautiful So you can carry it by normal elevator no large machine This flexible design makes more convenience to install High efficiency and saving energy: using the soft compressors and the advanced high efficiency heat exchanger, the energy wastage is 1/5 of the electrical water heater, and 1/3 of the gas heater The unit can reduce many cost for the users and reclaim the investment during short time Safe and dependable: by suing refrigerant, there is no hidden trouble like common water heaters such as flammable, explosive, getting an electric shock toxic Advanced intellectualized controller and humanistitc water supply system are used to keep the units running at low ambient temperature or high ambient temperature Carton and splint
Energy saving: with the international brands scroll compressor and high quality heat exchangers, save 65 to 80%, operating costs compared with other conventional water heating equipment (oil-fired boiler, gas boiler, electric boilers, and more) Quiet operation: with the high efficiency and low noise scroll compressor and the good quality fan motor Easy installation: small volume, can be carried by normal elevator, no large carrying machine Stable and reliable: with control and protection functions, unit operating in bad condition Environmental protection: units installed ground, central unit in the form of using geography, will not cause environmental pollution Cooling capacity: 40.0 to 162.0kw Heating capacity: 32.0 to 150.0kw Carton and splint
Big quantity hot water Energy saving Cooperate with the other energy Design the system according to your requirements Standard export package
Materials: Inner tank materials: sus304-2b Inner tank thickness: 0.5mm Outer tank: the steel coated with zinc Outer tank thickness: 0.37mm Insulation: polyurethane imported from south korea Insulation thickness: 50-65mm Frame materials: steel coated with the zinc Frame thickness: 1.5mm Advantages: low cost hot water and good heat efficiency. Standard export package
Inner tank: sus 304 Inner tank thickness: 1.2mm Outer tank: sus 304 Outer tank thickness: 0.31 Insulation: polyurethane imported from south korea Insulation thickness: 50-65mm Frame: sus430 Frame thickness: 1.5mm Pressure parameter: 0.6mpa Conducting materials: heat tube Advantages: for the pressured operation, got more rushed hot water while bathing. Even one vacuum tube broken, the whole system can go on working. Standard export package
Commodity Integrative Pressurized Solar Water Heater Vacuum Tube : 47mmX1500mm, 58mmX1800mm Amount of Vacuum Tube: 16 / 18 / 20 / 24 / 30 / 36 Material Inner tank: SUS304 stainless steel Outer tank: Galvanized steel alloy Bracket: Galvanized steel alloy Heat insulation layer: Imported polyurethane Heat pipe: straight copper pipe Thickness Inner tank: 1.2mm Outer tank:0.4mm Bracket::1.5mm Heat insulation layer: 50mm Working Temp 99 Celsius degree Working Press 1.0MPa (10 bars) Coloration as per Accessories Assistant tank and electrical heater Certificate ISO9001:2000, CE Warranty 5 years for full system / 15 years for vacuum tube MOQ negotiation Lead time within 15 days for full container at factory Payment Telegraphic Transfer (T/T), Letter of Credit (L/C)
Inner Tank Material: Stainless Steel Power Source: Solar Features: 1) Water tank capacity: 10L x X tube 2) Heat collector machine size: ª¦58 x 2.0m 3) New vacuum hot tube ª¦58 ó¬1800 mm 4) Inside water chest: imported BS SUS304-2B stainless steel (food class) 5) Outer water shell: A luster resembling plate (colors: white, argentine, gold) or stainless steel 6) Heat insulation layer: 60mm ammonia ester integral foaming, superior heat preservation 7) Grade A material: imported hot zinc steel plate 8) Glint plank angle of elevation: 45/50 9) Water tank diameter: 480mm 10) Falling water collection method.
Commodityregular solar water heater Materialinner tank: imported stainless steel (sus304/2b) Outer tank: galvanized steel alloy Bracket: 1.5mm Heat insulation layer: imported polyurethane (bayer, germany) Thicknessinner tank: 0.4mm Outer tank:0.4mm Bracket: 1.5mm Heat insulation layer: 50mm Working temp.99 celsius degree Working press.0.3mpa (3 bars ) Colorationas per Certificateiso9001:2000, ce Warranty5 years for full system / 15 years for vacuum tube Moq20'gp Lead timewithin 15 days for full container Payment telegraphic transfer (t/t), letter of credit (l/c) Carton
It is non-pressurized type solar water heater with water tank. It uses double-layer vacuum solar tube. This kind solar water heater is suitable for family in warm or hot areas. There is no water in its vacuum solar tubes, the water can be heated in its tubes, and then the hot water will be stockpiled in water tank. This non-pressurized solar water heater is very popular in asia, africa, torrid zone and warm area. 1) reliable and efficient with twin-glass solar tubes 2) easy plug-in installation 3) outer tank material: stainless steel plate or powder coated color steel sheet 4) inner tank material: 0.5mm thick sus304 food grade stainless steel plate 5) frame material: color steel 6) superior heat preservation ensured by 50 - 65mm polyurethane foam insulation layer All items are packed into cartons. For sample products, cartons are packed into plywood boxes. For containers, cartons are packed into container directly.
It is pressurized type solar water heater separated with water tank. It uses double-layer vacuum glass solar tube which has cooper heat pipe inside. This kind solar water heater is suitable both for families and projects in cold areas. It can be used in -25 celsius degrees. There is no water in its heat pipe tubes. This pressurized type solar water heater is very popular in europe and other cold areas. 1) high efficiency solar collector using heat pipe evacuated tubes 2) able to be used in all climates 3) reliable and efficient with twin-glass solar tubes 4) copper heat pipes for rapid heat transfer 5) easy plug-in installation for mounting on the roof or at ground level 6) maintenance free 7) suitable for mains pressure water (up to 8bar / 116psi) 8) corrosion resistant silver brazed copper header 9) frame material: aluminum alloy 10) casing material: aluminum alloy 11) excellent insulator in glass wool 12) collectors may be connected in series to increase water heating capacity 13) tubes easily replaced if broken - can be used with broken tubes 14) ideal for commercial solar water heating applications Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
It is a non-pressurized type solar water heater separated with water tank.. It uses double-layer glass evacuated solar tubes. It is high heat efficiency and economical system especially for projection. It is designed for commercial solar water heating application. This type soalr water heater is very popular in some hot or warm areas. 1). Designed for commercial solar water heating applications 2). Reliable, efficient, twin-glass solar tubes 3). Polyurethane insulation ensures good heating performance and minimal heat loss 4). Manifold cover's material: stainless steel or galvanized sheet 5). Frame material: 1.2mm thick all stainless steel 6). Easy plug-in installation 7). Can be connected in series to increase water heating capacity Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
This is a pressurized type tubular solar water heater (sfd type ) with copper coil. Sfd model has a special copper coil heat exchanger in the inner tank. The coil copper pipe can bear 8 bars pressure. The water in the tank is used as the heat transfer medium, rather than using it directly. The obvious advantages are with water supplier, which can supply cold water into the tank automatically; it can be connected with pressurized system. Sfd is suitable for torrid zone and warm areas. 1). Designed to accept mains pressure cold water 2). Copper coil heat exchanger can be used as part of a closed or open loop system, providing heating to a main hot water tank 3). Freezing is of minimal concern for sfd series 4). Reliable, efficient, twin-glass solar tubes 5). Superior heat preservation with 50 - 65mm polyurethane tank insulation 6). Outer tank material: stainless steel plate or powder coated color steel sheet 7). Inner tank material: A) 0.5mm thick sus304 food grade stainless steel plate B) high purity copper for the heat exchanger coil 8). Frame material: 1.2mm thick all stainless steel 9). Collectors may be connected in series to increase water heating capacity 10). Easy plug-in installation Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
This system consists five parts: solar collector, work station, expansion vessel, pressurized tank and controller. This system provides many advantages. It is the simplest and typically the least expensive active system to install. There is no heat exchanger, which allows efficient heat transfer directly to the water. The system operates at a standard line pressure. It is simple to add capacity to the system if demand changes. The system integrates easily with exsiting system. Solar heating system 1) once heat-exchange system 2)twice heat-exchange system ( single copper coil ) 3) twice heat-exchange system ( double copper coil ) Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
Evacuated Tube Specification Diameter Length 47 x 1500, 58 x 1800. Vacuum degree Pa 5 x 10 -3 . Absorptivity >0.93. Emissivity
Volume: 105~135L; 135~300L. Vacuum tube: 47*1500mm; 58*1800mm. Skin material: Fluorocarbon board with high quality. Inner tank material: Imported SUS304-2B food grade stainless steel. Insulating layer: polyurethane's cellular(thinkness:60-70mm). stent : Imported stainless circle steel. Specification: 15pipes\16pipes\18pipes\20pipes\24 pipes\30pipes\36pipes.
Collector: 47-1500, 58-1800, 70-2000 the new unit triplet gradation membrane collector vacuum tube is efficient in heat absorption and temperature rising. Inner tank material: sus304-2b imported food-grade stainless steel. Outer covering material: imported high-quality aluminum-zinc coated steel plate and imported fluorine carbon plate. Heat insulating layer: 50-65mm polyurethane integral pressure foaming. Bracket material: high-quality aluminum-zinc coated and plastic-sprayed bracket, all kinds of colour is available, the design is more reasonable, the color is more beautiful, it can be fixed flatly or scantly. 150*50*50cm, 50kg
Collector: 47-1500, 58-1800, 70-2000 the new unit triplet gradation membrane collector vacuum tube is efficient in heat absorption and temperature rising. Inner tank material: sus304-2b imported food-grade stainless steel. Outer covering material: imported high-quality aluminum-zinc coated steel plate and imported fluorine carbon plate. Heat insulating layer: 50-65mm polyurethane integral pressure foaming. Bracket material: high-quality aluminum-zinc coated and plastic-sprayed bracket, all kinds of color is available, the design is more reasonable, the color is more beautiful, it can be fixed flatly or scantly. 50kg per piece
Collector:47-1500, 58-1800, 70-2000 the new unit triplet gradation membrane collector vacuum tube is efficient in heat absorption and temperature rising. Inner tank material: sus304-2b imported food-grade stainless steel. Outer covering material: imported high-quality aluminum-zinc coated steel plate and imported fluorine carbon plate. Heat insulating layer: 50-65mm polyurethane integral pressure foaming. Bracket material: high-quality aluminum-zinc coated and plastic-sprayed bracket, all kinds of colour is available, the design is more reasonable, the color is more beautiful, it can be fixed flatly or slantly. Carbon size: 180*50*50cm for twenty-tube solar water heater.
Features: 1) Inner tank: stainless steel SUS304-0.5mm 2) Vacuum tube:QB-AL-N/AL-47-1500/58-1800 3) Outer tank: painted steel-0.4mm/aluminum-zinc coated steel-0.45mm/stainless steel SUS304 4) insulation :polyurethane 50mm/60mm 5) Frame: coated galvanized steel-1.5mm/stainless steel SUS430-1.5mm 6) Reflector: aluminum component/stainless steel .
Type: E5-58/1800-16 Outer tank: Al-Zn sheets Inner tank: SUS304-2B stainless steel Insulation: polyurethane, 55mm Absorptive coating: AL-N/AL Vacuum tube: Borosilicate glass,diameter: 58mm, length: 1.8m, 16pcs. Frame: aluminum alloy Absorber area(¬O): 2.0¬O Volume tank(L): 135L. Carton.
