Product Introduction - Rail Steerable Transfer Vehicle The rail steerable transfer vehicle is an electric material transfer vehicle powered by cable reels, it is designed for material handling. The rail steerable transfer vehicle gets power AC 380v through the device of cable reel, and the motor is controlled by the power through AC control system that make the rail steerable transfer vehicle to start, stop, go forward, backward, adjust the speed and so on. We adopt the magnetic coupling cable reel, it can make sure that there is no force on the cable and the cable can be wound and released evenly. If it is used in short distance transportation, it is a better choice without limited time. Of course, our product includers different power, the proper solution will be recommended to you after learning your requirements. Features - Rail Steerable Transfer Vehicle Metallurgical Motor - Y series metallurgical motor is suitable for frequent starting. Cable reel - With a large adjustment range for take - up torque, constant tension after adjustment and stability, good synchronization performance. Self-locking ability, no cable slipping - Reasonable structure arrangement, easy installation, use, maintenance, stable and reliable performance. Workshop bay to bay commonly used cars - This series of rail steerable transfer vehicles are mainly used in high temperature, harsh, explosion-proof occasions, it usually used in workshop bay to bay transfer. Large load capacity - The using time is unlimit, adapted to any load, high frequency of use. Custom Options - Rail Steerable Transfer Vehicle Flat decks or fixtures customized for specific loads. Custom deck configurations including built-in scales and lift/tilt/rotate capabilities. Non-guided steering. Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels. Fixed or variable speeds with forward/reverse function. Drives with acceleration/deceleration capabilities. Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation. Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems.
Product Introduction The automated slab transfer trolley is powered by towed cable, it is used to transfer material in factory. The specific funcations can be customized according customer's demands. Working Principle When the slab transfer trolley moves, the cable pulls behind the trolley. The cable is connected to the ground at one end, while the other is powered by an electric control box on transfer trolley, and then provide the power to the engine. The slab transfer trolley conduct AC 380V directly into the electrical control system of the trolley to let it start, stop, go forward and backward and so on. Customized Options Deck Railings Wood Decking Material Screw-Jack Lift Deck Paint Color (customer specified) Rail Guides Floor Rail End Stops Urethane Wheels (not available on guided carts) Live Axle
Product Introduction Industrial rail ferry cart usually works in the pit which table size is flush with the ground, the running direction of the rail ferry cart with the transfer cart working direction is a cross. The rail is installed on the top of the cart top is mainly used for ferrying the rail transfer cart instead of moving cargo. This series of transfer cart can be effectively complete the transfer of objects in a limited factory building. Working Principle This kind of cart is powered by battery, the batteries supply electricity to the DC motor through the electrical control system to start, stop ,go forward and backward, adjust the speed and so on. Advantage 1. Convenient maintenance: Lubricate some joint active parts, such as wheels, bearings, etc. Others mainly focus on inspection and cleaning. 2. Shorter shutdown maintenance time: Convenient and quick, short downtime, low maintenance costs. 3. Environmental impact equal to zero: Low noise, no emissions. 4. The control performance is better: The operation control is simple and convenient, and it is flexible, which greatly reduces the labor intensity of the operator, and it is very helpful for improving the working efficiency and the accuracy of the work. 5. Long service life of battery: The service life of the battery is 1500 charge and discharge cycles, and the working hours are about 12,000 hours.
Brief introduction for steel factory coil rail car steel factory coil rail car is widely used in the cold and hot steel rolling workshop production line. Steel coil is heavy and easy rolling, considering the security problem in transportation,according to this situation and the customer's requirements, our research team developed a kind of steel factory coil rail car. Features of steel factory coil rail car 1.The steel factory coil rail car adopts DC motor which can stable starting; 2.The body of the steel factory coil rail car is designed by box beam structure which not easily to deformation; 3.Wheels stable operation and easy maintenance; 4.When running, reducer working noise is very small; 5.Car table adopts V-type support to fixed the coil firmly on the steel factory coil rail car, 6.The V-type support also can choose adjustable type to meet handling different coil diameter. Advantages of steel factory coil rail car Safety and flexibility; High efficiency and stable start; Long lifetime and durable, at least 20 years of lifetime; Simple operation; Using frequency; Environmental protection.
Product Introduction for mould rail forging wheel The mould rail forging wheel can divide into different types, such as single flange wheel,double flange wheel,hollow wheel sets and solid wheel sets.The material and size of the mould rail forging wheel can be customized according to your requirements. Features of mould rail forging wheel High tolerance ; High tensile strength ; Safety and flexibility ; Large wheel pressure and Heavy Load capacity ; High strength & durable to use.
Products Introduction The battery steerable transfer cart is an electrc transfer cart powered by battery, it is designed for material transfer in industry fields. The capacity load of the battery steerable transfer cart can up to 500 tons. There two types of the battery steerable transfer carts, running on rail or running on ground. Both the type of battery steerable transfer cart and the deck configuration can be customized to suit specific requirements. Specifications Load Size/Shape: Customer supplied Load Weight: Up to 500 tons Cart Travel Speed: 0-40m/mim Power: Battery Applications Transport of heavy payloads between crane bays Transport of heavy loads through assembly line processes (I.e. railcar, construction equipment, agricultural equipment, truck, wind generator components, mining equipment, etc.) Transport of heavy loads through fabrication processes. Transport of coil steel, steel blank stacks, heavy plate stacks, etc., from storage to the process area.
Product introduction for busbar powered motorized transfer trolley The kinds of motorized transfer trolley is powered by busbar. The sliding line is usually installed between two rails or one side. The slider takes AC 380V from the sliding line to provide the motor through the electric control cabinet system. , to achieve the motorized transfer trolley to forward, back, start, stop and other operations. The power supply mode is as follows: a trench is opened on the side of the rail, a safety wire is installed in the trench, and a cover plate is laid on the trench. When the motorized transfer trolley is in operation, the cover is lifted by a flap device mounted on the flat cart, and the slider power is used to supply power to the motorized transfer trolley, and the motorized transfer trolley is automatically returned to the ground through the rear cover plate. Performance characteristics for busbar powered motorized transfer trolley The installation method of the trolley rails in this series is not fixed, and can be installed in the track or on one side of the trench or on the nearest wall according to the site layout. Suitable for medium and long distance, frequent start and stop, work environment with high work intensity. Usage and maintenance for busbar powered motorized transfer trolley During the use of the sliding wire, it should be taken to keep it free from foreign matter in the sliding wire. If there is any foreign matter, it should be cleaned in time to avoid poor contact and affect the use of the motorized transfer trolley. If you find that the cable insulation is damaged during use, replace the cable with new one.
Product Introduction The mold transport cart is designed for die or mold handling. The mold transport cart is powered by dragged cable. The capacity load of the mold transport cart can reach 500 tons. Depending on the size of the die or mold, you can choose the size and load capacity of the mold transport cart. Working Principle When the mold transport cart moves, the cable pulls behind the mold transport cart. The cable is connected to the ground at one end, while the other is powered by an electric control box on mold transport cart, and then provide the power to the engine. The mold transport cart conduct AC 380V directly into the electrical control system of the mold transport cart to let it start, stop, go forward and backward and so on. Performance Characters 1. As a common tool for short-distance transit across the factory, the mold transport cart has a simple structure, low production cost. 2. This series mold transport carts are suitable to be used in the bad environment, for example, high-tempeture and anti-explosion condition. Compared with KPX series cart, the using time is not limited. 3. Compared with KPD series cart, it has no strict requirement on the rail's installation. Compared with KPJ series cart, the cost is lower. 4. Mesa size, the gauge can be customized. Various non-standard mold transport cart can also be obtained. 5. Choose import wireless remote control, control the distance of 100 meters.
Product Description Cross-bay steering transfer cart is a kind of rail transfer cart which can solve the problem of product transportation between factory spans. It is also called rail flat cart, electric rail transfer cart and so on. The cross-bay steering transfer cart is running on the rails and powered by battery. Working Principle The battery is installed in the cross-bay steering transfer cart. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the cross-bay steering transfer cart to start, stop, go forward, backward, adjust the speed and so on. Safety Device 1. Acousto-optic warning lamp(When the cross-bay steering transfer cart is running, it will ring up to warn others) 2. Urgent stop button(When encountering unexpected situations, pressing the emergency stop button, the cross-bay steering transfer cart will immediately stop to ensure safety) 3. E-stops (The induction switch equipped on the front and rear of the cross-bay steering transfer cart, the cart will automatically stop when induction of obstacles, to ensure safe)
Product Details Usage: Industrial, Workshop, Warehouse, Port Wheel Type: Polyurethane Wheels Color: Customized Running Speed: 0-40 m/min (Adjustable) Load Capacity: 1-500 Ton (Can Be Customized As Per Demands) Wheel Amount: 4/6/8 Application: Materials Transfer Working Principle The trackless material transfer cart is battery powered. The battery is installed in the trackless material transfer cart. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the trackless material transfer cart to start, stop, go forward, backward, adjust the speed and so on. Features 1. Maintenance-free high-power AC drive system, providing reliable driving power; large-capacity battery, strong endurance. 2. Unlimited remote control, simple operation, safe and stable. 3. Standard imported controllers, meters, reliable, durable; waterproof and dustproof plug-in, to give the circuit a reliable protection, greatly reducing the electrical fault. 5. Emergency power off switch, turn speed limit, undervoltage protection, and other personnel safety features to ensure traffic safety. 6. Polyurethane rubber wheel, no damage to the ground, the body of high stability, not easy to slip. 7. Optional side pull battery, large capacity battery; support non-standard customization, such as the weight, body size and so on. Applications Die handling; Portable machine base; Assembly mount; Metal coil transporter; Heavy equipment transporter with lift deck; Structural steel transporter; Shuttle cart for pipe; Pre-cast concrete production trolleys;
Produscts Introduce The trackless transport cart is a kind of material handling cart without rail. Large capacity, stable start, do not rely on rail, tow-way travel. Hydraulic steering mechanism ensures tight turning radius, enabling 360° turn in a small space. The trackless transport cart can divided into two types, electric powered trackless transport cart and no powered trackless transport cart. Advantages 1. No need install rail, no any damage to the floor. 2. It can realized double way moving and 360 degree turning. 3. Heavy loading capacity. 4. Small turning radius, flexible operation. 5. Braking distance is short, and have alarming system. Applications Transport of heavy payloads between crane bays Transport of heavy loads through assembly line processes (I.e. railcar, construction equipment, agricultural equipment, truck, wind generator components, mining equipment, etc.) Transport of heavy loads through fabrication processes.
Products Introduction Of Cross Rail Transfer Cart The cross rail transfer cart is an electric flat cart designed for cross rails. It has eight wheels, four in the horizontal direction and four in the vertical direction. Its working principle is when the flatbed cart runs to the cross road, the cart will put down another set of four horizontal wheels, pack up four vertical wheels, and move the flat cart through the electric steering controller, it is powered by battery, but you can also choose other power supply mode. The cross rail transfer cart is a kind of rail cart that can replace the electric turntable. It can be moved freely in multiple cross rails without the need of the matching turntable. The cart can complete the rail change operation and achieve a
Product Description About the powered die transfer cart, literally speak, it is an electric transfer cart for die and mold handling in industrial. The power supply of the powered die transfer cart can be choosed according different application, such as battery powered, conductor rail powered, cable drun powered, mobile cable powered, sliding wire powered and so on. Character
Model Volume (m) Load (T) Gauge (mm) Wheel Base (mm) Wheel Diameter (mm) Traction (KN) Traction Height (mm) Overall Size (L*W*H) KFU0.55-6 0.55 1.3 600 500 300 60 320 1552*850*1150 KFU0.75-6 0.75 1.88 600 600 300 60 320 1700*980*1250 KFU1.0-6 1.0 2 600 600 300 60 320 1910*1070*130 KFU1.2-6 1.2 3 600 700 300 60 320 2228*1070*1320
mine material car model MLC2-6 MLC3-6 MLC5-6 MLC5(3)-9 MLC3-9 loadage(t) 2 3 5 5 3 track gauge(mm) 600 600 600 900 900 contour dimension(mm) 2000*880*1150 1050*1200*1200 3450*1200*1200 3450*1230*1200 2100*1150*1300 wheel base(mm) 550 750 1100 1100 900 wheel diameter 300 300 350 350 350 heigth of towing attachment(mm) 320 320 320 320 320 allowed traction(kn) 60 60 60 60 60 overall weight(kg) 520 520 920 940 790
Model Volume (m) Load (T) Gauge (mm) Wheel Base (mm) Wheel Diameter (mm) Traction (KN) Traction Height (mm) Overall Size (L*W*H) KC1.2-6 1.2 3 600 600 300 60 320 2100*1050*1200 KC1.6-6A 1.6 4 600 800 350 60 360 2500*1200*1300 KC2-6A 2 5 600 1000 400 60 385 3000*1250*1300 KC2.5-6A 2.5 6.25 600 1100 400 60 385 3500*1250*1300 KC3-6 3 600 1400 350 60 420 3600*1350*1335
Parameters unit key parameter Model 1.2M3 double Side type(N) 1.6M3 hydraulic pressure 2.5M3 Hydraulic pressure 4M3 Hydraulic pressure 6M3 Hydraulic pressure 8M3 Hydraulic pressure volume M3 1.2 1.6 2.5 4 6 8 load T 3 4 6.25 10 15 20 track gauge mm 600 762 762/900 762/900 762/900 762/900 wheel base mm 620 800 120 2000 2000 2600 wheel diameter mm 300 350 400 350 350 350 Binder shape Bolt link Bolt link Bolt link Bolt link Bolt link Bolt link Traction high mm 335 320 320 430 430 430 Uninstall Angle (.) 45 45 42 42 42 overall dimension long mm 2150 2500 3650 3650 4850 6350 wide mm 1450 1200 1250 1500 1500 1500 high mm 1270 1300 1300 1586 1586 1634 self weight 1000 1663 2505 3850 4900 6300 Traction speed km/h 12 12 12 8 8 8 turn radius m 8 10 12 15 15 18
Model loading (kg) L(mm) W(mm) H(mm) Rail gauge(mm) Wheel Dia.(mm) Pulling Height(mm) Weight (kg) MPC2-6 2000 2000 880 410 600 300 320 490 MPC3-6 3000 2400 1050 415 600 300 320 530 MPC5-6 5000 3450 1200 480 600 350 320 900 MPC5-9 5000 3450 1320 480 900 350 320 910 MPC10-6 10000 3460 1300 304 600 250 230 910 MPC10-9 10000 3460 1300 304 900 250 230 1030 MPC13-6 13000 3350 1400 342 600 300 270 1015 MPC15-6 15000 3460 1300 357 600 300 320 1160 MPC15-9 15000 3460 1300 357 900 300 320 1240 MPC18-6 18000 3350 1400 346 600 300 270 1132 MPC20-6 20000 3460 1300 364 600 300 320 1240 MPC20-9 20000 3460 1300 364 900 300 320 1320 MPC25-6 25000 3460 1300 390 600 350 320 1750 MPC25-9 25000 3460 1300 390 900 350 320 1800 MPC26-6 26000 2400 1462 390 600 240 280 1133 MPC30-6 30000 3460 1300 400 600 350 320 170 MPC30-9 30000 3460 1300 400 900 350 320 1900
Model load(t) Track Overall dimension Wheelbase Dia. of wheel Length Width Height mm YPC1-6-6 1 600 1500 850 400 500 300 YPC3-6-6 3 600 1900 1050 425 600 300 YPC3-7 3 762 1900 1050 425 600 300 YPC5-6 5 600 3000 1200 510 1000 400 YPC5-7 5 762 3000 1200 1650 1000 1000 YPC5-9 5 900 3000 1200 510 1000 320
Model Mine Car Weight kg Track mm Wheel Diameter Max Axle Distance of wheels Min distance of covers Axle diameter ZBL600/300 â?¤2400 600 300 808 510 60 ZBL762/300 762 970 672 ZBL900/300 900 1108 810 ZBL600/350 â?¤6700 600 350 850 490 80 ZBL762/350 762 1012 652 ZBL900/350 900 1150 790 ZBL600/400 â?¤9000 600 400 870 476 95
