Neoprene rubber sheet.
Manual mold silicon rubber. 25kg/drum.
Silicone rubber for mold making is primarily intended for poly resin crafts, pu crafts, pu resin crafts , gypsum crafts , unsaturated resin crafts, lighting and candles crafts , plastic toy , stationery gifts crafts industry, a large statue buddha, relievo , furniture, furniture decorative materials, statues buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. 25kg/drum
1.The application of pad prints silicone rubber: Pad prints silicone rubber with high printing times and abrasion, resistence, without any inpurites, with good printing effects . 2:the usage of pad prints silicone rubber: Making the printing pads for plastic toys, craftworks, product printing. 3:the description of pad prints silicone rubber: The pad prints silicone rubber with the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding american dupont teflon high-temperature resistance new material, is processed through high-temperature machining. The product is mainly applicable to plastics toys, electroplating products, electronic toys, trademarks and irregular pattern printing. The pad printing silicone rubber is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface. 25kg/drums
Physical properties of our high performance vacuthermal silicone rubber membrane: Hardness: shore a 50 +/- 3(other hardness formulation available upon request) Tensile strength : 12.6 mpa (1830 psi) Elongation :up to 800 % Tearing strength :43.5 n/mm {250 lb/in} (meniscus method) ;32.5 n/mm {185 lb/in} (rectangular method) Linear shrinkage :3.3 % Dimensions:0.8 - 10mm {1/32" - 7/16"} thickness;2520 mm {99"} width maximum true seamless ;unlimited practical width with seamless vulcanized joints;length limited only by material handling capability Long run temp :230 degrees celcius {446 degrees fahrenheit} Color :clear, grey, red & opaque
Natural rubber tube
Cas no 63148-57-2 Apperance & property: colorless transparent liquid Hydrogen content (%) 1.58-1.60 Viscosity (25ípc, mm 2/s) 20.00-30.00 Flash pointú¿ípcú¬ í²120ípc Volatile componentú¿%ú¬ ín3.00 Packing in 200 l plastic iron drum or 1 ton ibc
Molecular weight (10000) 45í¬75 Vinyl content % 0.03í¬1% Volatile content (%)
Silicone rubber compound for molding and extrusion like keypad, remote control devices N. W. 20kg/carton box
Parameter: Item Style Abt-1610l Abt-1610m Abt-1610h Density g/cm3 1.8~2.0 1.8~2.0 1.8~2.0 Tensile strength í²mpa 6 9 12.5 Compressibilityí²% 12ía5 12ía5 12ía5 Recoveryí²% 40 45 45 Aging coefficient 0.9 0.9 0.9 Stress relaxation ín% 45 45 45 Steam sealing Tmax: 200 Pmax: 2~3mpa 30min No shock Tmax: 300 Pmax: 4~5mpa 30min No shock Tmax: 400 Pmax: 8~9mpa 30min No shock Tmax: 200 300 400 Pmax: mpa1.5 3.0 5.0 Resistance To media Water, seawater, steam, fuel, gases, salt solutions And many other media. Pallet
Construction: Double-face tanged cs + asb beater It is a composite from asbestos beater sheet reinforced with single tanged 0.2-0.25mm carbon steel on double-face Application: It is extensively applied in manufacturing various exhaust gaskets for automobile and motorcycle etc. Dimensions: 500x1000mm, 500x500mm Thickiness:1.2~2.5mm Pallet
Parameter: Item Style Abt-1641a, abt-1641na Density g/cm3 1.30~1.50 Tensile strength í²mpa 12.7 Compressibility í²% 10ía5 Recovery í²% 40 Sealing performance
Parameter: Item 60r 50r Hardness: shore a 65 65 Density: kg/m3 546 639 Tensile strength: (lb/sq in)323 323 Compressibility (lb/sq in) 37.7 39.0 Recovery(%) 80.6 81.40 Dimension: Sheets 930x630mm 1000x1000mm Carton
Item Style Abt-1700l Abt-1700m abt-1700h abt-1700ch Tensile strengthí²mpa 9 12 15 19 Aging coefficient 0.9 0.9 0.9 0.9 Loss on ignitionín% 30 30 28 28 Compressibilityí²% 12ía5 12ía5 12ía5 12ía5 Recoveryí²% 40 40 45 45 Density g/cm3 1.6~2.0 Tmax: 0c 200 300 400 450 Pmax: mpa 2.3 3.5 5.0 6.0 Resistance To media Water, seawater, steam, diluted acid & alkali, gases, alcohols, salt solutions etc. Under temperature and pressure. Pallet
Specifications resistvity of surface layer 106-109¬+ Resistvity of botton layer 103-105¬+ Bulk resistvity 105-108¬+ Abrasistivity loss f_0.02g/cm2 Time forf static dissipation
Rubber band.
Sponge rubber strips
Double sided self-adhesive rubber sealing strips.
Silicon rubber for molding making is primarily intended for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts, crafts industry, a large statue buddha, relievo furniture, furniture decorative materials, statues buddha artifacts copied, building decoration materials, large-scale cerment mold, artificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Silicon rubber for molding is white or red flowing liquid with general hardness of 22-50A centi degrees after curing. Molding silicon rubber is a kind of elastic silicon rubber whose features with resistance to deformation,high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation. Silicon rubber for mold making operationsú¦ If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed. 25KG,200KG/DRUM PACKING Delivery Lead Times : within 3 days after payment confirmed in bank.
Silicon rubber for manual mold applicationsú¦ The manual mold silicon rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc. Silicon rubber for manual mold features descriptionú¦ The manual mold silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers. Silicon rubber for manual mold operationsú¦ Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2-3 hours. (Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demold.) Frequently asked questions for Silicon rubber for manual mold 25KG,200KG/DRUM PACKING Delivery Lead Time : within 3 days after payment confirmed in bank.
